|
| 1 | SCHEDULE \"A\" PART-I: B/R WORKS |
| 2 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) and removing them to store |
| 3 | Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) |
| 4 | S & F Solid pvc Door Frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with MS Square etc. |
| 5 | S & F A Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately) |
| 6 | Supplying and fixing Factory Made Solid PVC Moulded Door (with particle boardcore ) Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawingg. Make: RAJASHRI PLASTIWOOD or equivalent make as approved by GE. |
| 7 | S & F 35 mm thick factory made Second class hard woodkiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc. |
| 8 | S&F 30mm thick Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 9 | Supply & fixed Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 10 | S&F Powder coating anodised aluminium frame for doors, windows, ventilatiors with one or more rebtes including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating 50 micron). |
| 11 | Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint. |
| 12 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 13 | S&F for B Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snapbeading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 14 | S & F 4.8 mm thick Sheet glass, ordinary quality and glazing with wooden beadsin squares not exceeding 0.5 Sqm in each pane |
| 15 | S & F 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane. |
| 16 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast. |
| 17 | S&F mild steel flat iron of size 25x3mm as in hold fast |
| 18 | S & F 100 mm long medium weight, cold rolled brass Butt hinges and fixed. |
| 19 | S & Fin repair 100 mm long Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed type B-21. |
| 20 | S & Fin repair 150 mm long Extruded brass handles, fabricated type polished |
| 21 | S & Fin repair 150 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed |
| 22 | S & Fin repair 100 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed |
| 23 | S & Fin repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy. |
| 24 | S & F in repair Cast iron body door closer hydraulically regulated, designation No. 3 universal type , suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg |
| 25 | S&F in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe as directed. |
| 26 | S & F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket, seat cover etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. fixed in repairs |
| 27 | S&F in repairsfor 15 mm dia bore angle tap . |
| 28 | S&F in repairsfor 15 mm dia bore 2 in 1 tap . |
| 29 | S&F in repairs PVC connection 15 mm bore450 mm long |
| 30 | S&F in repairs grating round 100 mm size of PTMT (min weight 25 grms). |
| 31 | Supply and fix 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 32 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 33 | S & F in repairs 15 mm bore Fancy type pillar taps,Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed with long screwed shanks and fly nuts, screwed for iron pipe and fixed. |
| 34 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm sizeincluding cutting for and pinning ends of brackets or erecting stand. |
| 35 | S & F in repairs Brass CP Wall mixer with bend pipe for overhead shower of15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified |
| 36 | S & F in repairs Toilet paper holder with flat recessedtype stainless steel Complete all as specified and directed |
| 37 | S & F in repairs Brass chromium plated shower rose 125mm size Complete all as specified and directed |
| 38 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 39 | S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar of dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx420mm bowl size 410mmx330mmx160mm. Make : NIRALI/DIAMOND/JINDAL. |
| 40 | S&F of Vitreous China Urinal, Half stall type whitecomplete including providingand fixing plugs, bedding urinalagainst wall in cement mortar 1:2, securing urinal to plugs withand including 60mm long brassscrews, pointing around urinalback in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. Complete all as specified and directed |
| 41 | S&F of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) Complete all as specified and directed |
| 42 | S&F of Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) Complete all as specified and directed |
| 43 | S&FTowel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) Complete all as specified and directed |
| 44 | S&F Low density polyethylene pipes (LDPE) waste pipes of pressure rating 6 kgf/cm2 fixed complete in floors |
| 45 | S&F ,Brass chromium plated Tubular towel rail, 20mm dia, D type 60cm long between flanges complete all as specified and directed |
| 46 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for r removal to store |
| 47 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for removal to store |
| 48 | Taking up or down 25 mm bore CPVC Pipeand connections, including cleaning for Refixing or removal to store |
| 49 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 16mmfittings on walls/ceiling or laying in floors complete all as specified. |
| 50 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 20 mmfittings on walls/ceiling or laying in floors complete all as specified. |
| 51 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 of dia 25mmfittings on walls/ceiling or laying in floors complete all as specified. |
| 52 | Demolition and breaking up including removing salt glazed stoneware pipe 150mm bore (internal) with concrete bedding and haunching complete including necessary earth work as required all as specified and directed. |
| 53 | M&L for cement concrete bed to drain pipe 150mm bore (Internal) in cement concrete (1:3:6) type C-2 with using 40mm graded crushed stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested all complete all as specified and directed. |
| 54 | M&L for Reinforced concrete pipes150mm dia (internal), class NP3, laid and jointed complete with collars as in sewage lines laid in trenches and jointed complete |
| 55 | Taking down rain water pipes including all fittings any size and pattern. |
| 56 | M&L for 75 mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls . |
| 57 | M&L for 110mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls . |
| 58 | S/F 75 PVC(SWR) branch piece,single (single Y) equal or unequal with access door |
| 59 | S/F 110PVC(SWR) branch piece,single (single Y) equal or unequal with access door |
| 60 | S & F 75 mm dia.,PVC Bends (any Radius) with access door |
| 61 | S & F 110 mm dia., PVC Bends (any Radius) with access door |
| 62 | S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified and directed |
| 63 | Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises. |
| 64 | S&F vitrified ceramic tiles 8 to 10 mm thick (square or rectangular) polished area of each tile exceeding .36 sqm but not exc. .42 sqm in floor etcset and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 complete all as specified and as directed |
| 65 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match oloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes. |
| 66 | Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl sreed bed 10 mm thick in CM 1:4 . |
| 67 | Taking down cement plaster on brick wall stone wall etc including raking outjoints, hacking for key securing down with water etc |
| 68 | M&L, rendering 15 mm thickin cement mortar 1:4 on other than fair face of brick or surface finished even and smooth without using extra cement . |
| 69 | M&L, rendering 10 mm thickin cement mortar 1:6 on other than fair face of brick or surface finished even and smooth without using extra cement . |
| 70 | M&L, rendering 5 mm thickin cement mortar 1:3 on concrete surface of ceiling finished even and smooth without using extra cement . |
| 71 | M&L for applyingtwo coats 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Lit/10 Sqm over newly plasteredby auto roller upto 4th floor surfaces incl preparation of surfaces. |
| 72 | M&L for preparation of newly plastered surfacesof wall by Vaccum based sanding machine applying wall care putty (Multipurpose mixer shall be used for uniform and poper mixing of putty ) and applyingtwo coats ofemulsion distemper white or coloured by auto roller complete all as specified and directed as per manufacturetr instruction. |
| 73 | M&L for Preperation of new plastered surface of ceiling applying three coat of white wash. |
| 74 | Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash. |
| 75 | M&L for Granite work 18 to 20mm thick(table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing inwhite cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed. |
| 76 | M&L Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth soft/loose soil and getting out complete all as specified and directed |
| 77 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc including removal of debris out side MD land |
| 78 | M&L forPre-cast cement concrete block masonry with solid blocksType C-1 (1:3:6) 20mm graded crushed stone aggregate, exc. 10cm in width and setting in mortar1:6 completeall as specified. |
| 79 | M & L fixing 19mm prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations& other side balancing white lamination, fixed with screws to timber to timber frame work |
| 80 | M&L Reinforeced cement concrete of Type B1 1:2:4(20 mm gradedaggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 81 | M&L Reinforeced cement concrete of Type B1 1:2:4(20 mm gradedaggregate) for Beams, cantilevers, bressumm ers, lintels over 1.5m s complete all as specified and directed |
| 82 | Demolition of reinforced concrete in roofs, floors (other than ground floors), beams, stair cases, landings chajjas and similar suspended works |
| 83 | M&L for reinforced cement concrete Type B1 1:2:4 (nominal mix) mix using 20 mm graded aggregates as in chajjas. |
| 84 | Formworkof rough finished surface of concrete to chullah hoods, chajjas, troughs and similar items including edges. |
| 85 | M & L for TMT reinforcement 12mm dia and over cut to length bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete. |
| 86 | M & L for TMT reinforcement 8 mm dia and over cut to length for stirrups bent to shape including cranking, hooking etcbinding with mild steel wire not less than 0.90 mm dia (annealed) all as directed complete. |
| 87 | M&L for complete removalof existing treatment from old decorated plastered surface of wall by by Vaccum based sanding machineremoval of nails etc and filling cracks /hole with putty ,applying wall care putty upto 1mm thick as required (Multipurpose mixer shall be used for uniform and poper mixing of putty ) and applyingtwo coats ofemulsion distemper white or coloured by auto roller complete all as specified and directed as per manufacturer instruction. |
| 88 | S & F Continuous (piano) hinges, brass, bright finish or electrogalvanised of 40mm flap width Complete all as specified and directed |
| 89 | Dismantling water tanks and removing to store exc 500 & not exc 1000 ltrs |
| 90 | S&F in repair1000 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified |
| 91 | S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms./ 25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 92 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 93 | M&L for Plain Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) 100mm thick as in sunken floors,foundations, filling and mass concrete type D- 2, 1:4:8 (40mm graded aggregate)Complete all as specified and directed |
| 94 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floorsNOTE: Water proofing compound will be measured separately |
| 95 | M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors. |
| 96 | S&F of brass Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and directed |
| 97 | S&F of 100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed |
| 98 | S&F Harrison rails, anodised aluminium alloywith fixing brackets, stops, rollers etc. complete all as specified and directed |
| 99 | S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floorcomplete all as specified and directed |
| 100 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard andrailing 60cm longcomplete all as specified and directed |
| 101 | S&F for Modular Kitchen with following elements(i) Cultery Baskets 21\"\"x20\"\"x4\"\" (ii) Plain Baskets21\"\"x20\"\"x4\"\" (iii)Plain Baskets21\"\"x20\"\"x6\"\" (iv)Thali Baskets21\"\"x20\"\"x8\"\" (v)Plain Baskets21\"\"x20\"\"x8\"\" (vi)Telescopic Channel (vii)Cabinet below kitchen platform front shutters 10\"x2\".6\"\" (viii)Door for baskets 4\"x2\".6\"\"x2\" x 2 nos (ix) Over Head Cabinet5\"x2\".6\"\" x 2 nos with glass doors & one shelve(x)Shelves 5\"x1\" x 2 nos (xi) Glass Doors 5\"x2\".6\"\" x2 nos |
| 102 | SCHEDULE \"A\" PART-II: E/M WORKS |
| 103 | Taking down aluminium / copper point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, cover plate , frame and light fittings etc. and making good the disturbed surface on walls floorscomplete all as specified and directed by Engr-in-charge. |
| 104 | M & L For Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn throughPVC Conduit concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1mm thick GI Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light Point / Fan Point /bell pointcontrolled by One Switchwith all accessories complete all as specified. [Note- The PVC Conduit to Concealed in wall through cutting,Chassing,Pining in making good surfacing where required and pointing in cement mortar and making good for same unit rates are inculded for same] |
| 105 | Description all as per item No. 102 above but for 05Amp switch socket out let, same board complete all as specified |
| 106 | Description all as per item No. 102 above but for 05Amp switch socket out let, independent with 1.5sqmm copper cable of PVC insulated, unsheathed, multi stranded and 1.5 Sqmm for earth continuity conductor, complete all as specified |
| 107 | Description all as per item No. 102 above but for 15/16Amp switch socket out let, independent with 4 sqmm copper cable of PVC insulated, unsheathed, multi stranded and 4.0 Sqmm for earth continuity conductor, complete all as specified |
| 108 | S& F switch modularone way 6 Amps,1 module 230V complete all as specified and directed. |
| 109 | S& F modular switch 1way 16 Amps, 1 module 230V of 1 module complete all as specified and directed. |
| 110 | S& F bell push modular, one way 6 Amps, 1 module 230V complete all as specified and directed. |
| 111 | S& F modularsocket outlet 3 pin, 6 Amp 2module 230V complete all as specified and directed. |
| 112 | S& F modularsocket outlet 3 pin, 6/16 Amp 2module 230V complete all as specified and directed. |
| 113 | S& F calling bell AC 230V,complete as specified by Engr-in-Charge |
| 114 | S& F ceiling rose surface bake lite complete all as specified and directed by Engr-in-charge. |
| 115 | S& F modular type fan regulator step down type 120W complete all as specified and directed. |
| 116 | S & F Surface & wall mounted Energy efficient LED Tube Light batten Fitting, of not less than 18 W output, cool /warm white, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor of suitable complete all as specified and as directed. |
| 117 | S & F Surface & wall mounted Energy efficient LED Tube Light batten Fitting, of not less than 9/10 W output, cool /warm white, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor of suitable complete all as specified and as directed. |
| 118 | S & F Surface & wall mounted with inbuilt occupancy sensorwith sense rangee 2-7 mtr with instant on sense timing with of cap 15 watts cool/warm white LED light fittings complete all as specified and as directed |
| 119 | Taking down ceiling fan of any size from its position anddoing complete repair of fan and refixing the same after repairs complete all as directed by Engr-in-Charge.Note : Material required for repair will be measured and paid under seperate item of this schedule as \"Supply only\".. |
| 120 | Supply only02 Nos canopy complete all as specified and as directed. |
| 121 | Supply onlyBall bearing for ceiling Fan No 6200 complete all as specified and as directed. |
| 122 | Supply onlyHanging clamp and Nut bolt with split pinfor ceiling Fan complete all as specified and as directed. |
| 123 | Supply only Fan capacitor of capacity 2.5 mfd epoxy filled typecomplete all as specified and as directed. |
| 124 | Supply only Fan down rod upto 600 mmcomplete all as specified and as directed. |
| 125 | M&L for Repairs to fan shaft by filling metal, cutting by machine, Grinding, polishing complete and making good adequately for ceiling fans complete all as specified and as directed. |
| 126 | M & L for painting of Ceiling Fan complete upto 1400 mm sweep with one coat of white paint/existing fanusing spray machine painting including cleaning, washing of surfaces complete all as directed. |
| 127 | Supply and fixingof Factory made sheet metal enclosure for DBs (Fixed flush to the wall), TPN 240 volt,4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified. |
| 128 | Supply and fixingof Factory made sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 240 volt,8 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s , complete all as specified. |
| 129 | Supply and fixing of MCB 40 to 63A, 240 Volt, SPN, breaking capacity 10 KA \"C\" series, , complete all as specified |
| 130 | Supply and fixing s of MCB 6 to 32Amp, 240 Volt, SP, breaking capacity 10 KA \"C\" series,complete all as specified |
| 131 | Supply and fixing s ofMCB 40 - 63 Amps, 415 Volt, TP / TPN, breaking capacity 10 KA \"C\" series, complete all as specified |
| 132 | S & F s Modular Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20A rating complete all as specified and as directed. |
| 133 | S & F s TV Cable Socket / Outlet, Deluxe, Modular Type, One Moduleincluding suitable Modular Type Pressed Metal Flush Box made out of 2mm thick MS Sheet, Modular type Base / Grid Frame & Cover Frame complete all as specified. |
| 134 | S & F Rigid non-metallic PVC conduit of 20mm dia inclusive of junction boxes (junction/ terminal) and provision of TV Cable from TV socket to outside of main entrance or as directed including all accesories such as tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed. |
| 135 | Sub main wiring with 2 runs of single core 4 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessoriesconcealed/semi concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old unserviceable sub main wiring complete all as specified. [Note: Copper conductor 2 run and one run of copper earth wire along with PVC concealed conduitshall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.] |
| 136 | Sub main wiring with 4 runs of single core 6.0 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 32 mm dia with all accessoriesconcealed/semi concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6.0 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor including taking down old unserviceable sub main wiring complete all as specified.[Note: Copper conductor 4 run and one run of copper earth wire along with PVC concealed conduitshall be measured as one length & Cutting of chases/walls and making good the disturbed surface are included in the rate.] |
| 137 | Earthing complete with Galvanised Steel Earth Plate Electrode 600 x 600 x 6 mm thick burried directly in ground (Earth Pit not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mmas earth lead and GI pipe 40 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the Plate bymeans of GI Bolts & Nuts complete all as per Electrical Plate No 3 of SSR Part - I, connected to panel/DB including testing on completion including main earthing, Charcoal, Common Salt, PCC (1:2:4, Type B1) Pit with RCC 1:2:4, Type B1 Cover, 50mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS Funnels with 20 mm bore, medium grade GI watering Pipe, Wire Mesh, Earth Work excavation, return filling, removal of surplus soil etc., and disconnecting and taking down existing Earthing of any description complete all as specified and directed. |
| 138 | M&L for 4mm dia galvanised iron wire for earthing connection to building, complete all as specified. |
| 139 | Supply and fix Exhaust fan AC single phase 230/240V of size 300mm sweep with blades, frames, louvers and wire mesh, including making hole of proper size for fixing of exhaust fan and making good to disturbed surfaces and matching with existing wall complete all as specified and as directed by Engr-In Charge. |
| 140 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm all as specified and directed by Engr in charge. |
