|
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed. |
| 2 | M & L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement on internal wall surfaces complete all as specified and as directed. |
| 3 | M & L for rendering 10mm thick in CM 1: 6 as under layer and 5mm thick in CM 1:4 mixed with water proofing compound as finishing layer to external wall surfaces and finishing the surface even and smooth including taking down existing cement plaster if necessary complete all as specified and as directed. |
| 4 | Supply only integral water proofing compound. |
| 5 | Preparing new plastered wall surfaces and applying two coat of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 6 | M & L for preparation new plastered surfaces and applying two coat of exterior weather proof paint over a coat of primer white or tinted upto tripal storey building incuding scaffolding arrangment on external surfaces of wall complete all as specified and as directed. |
| 7 | Complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer to internal wall surfaces complete all as specified and as directed. |
| 8 | M & L for complete removal of existing treatment, washing, rubbing down and stopping of painted/treated surfaces and applying two coats of exterior weather proof paint coat over a coat of primer white or tinted upto tripal storey building incuding scaffolding arrangment on external surfaces of wall complete all as specified and as directed.(Note:- different colours to be used on coloumns, beams, chajja, paradi etc.,) |
| 9 | Removing the existing roof treatment of any description completely and removel of all the debris from site and rubbish off the premises complete all as specified and as directed. |
| 10 | M & L cement Screed bed 20mm thick in CM 1:4 with using waterproofing liquid as per manufacturers instructions complete all as specified and as directed.(WPC Measured and paid separately) |
| 11 | M & L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.00 Kg/Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions. The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage.Manufactures:- IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP.Note:- The work shall be carried out be authorised applicators of manufactures |
| 12 | S & F in repair vitreous china wash down water closet (Squatting pattern), Orissa pattern, size 580 x 440mm white with integral foot rests, excluding flushing cistern including provision of lime concrete bedding complete all as specified and as directed. |
| 13 | S & F in repairs PVC, syphonic action type, flushing cistern, low level, white, 10 ltrs, with inlet ball valve, float, handle and flush pipe including. brackets including 32mm dia flush pipe complete all as specified and as directed. |
| 14 | S & F in repairs Bib taps 15mm bore cast copper alloy with crutch or butter fly handle chromium plated screwed down for iron pipe or for brass ferrule fixed complete all as specified and as directed. |
| 15 | S & F in repair stop valves15mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 16 | S & F Pillar taps 15mm, cast copper alloy with capstan heads, CP fancy type, screwed down high pressure with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and as directed. |
| 17 | S & F in repair CP brass shower rose 125mm size suitable for 15mm bore pipe complete all as specified and as directed. |
| 18 | S & F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete all as specified and as directed. |
| 19 | S & F Vitreous China oval shaped wash basin counter type, white, size 550 x 400mm embedded on marble platforms including cutting for and pinning in ends of brackets or erecting stand brackets, 32mm Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms /40mm-60 gms & waste pipe including taking down of old wash basin complete all as specified and as directed. |
| 20 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 21 | S & F in repairs 450 x 600mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and as directed. |
| 22 | S & F in repairs Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 23 | S & F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including 32mm waste fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 24 | S & F in repair stainless steel kitchen rack of size 30\" x 24\" x 10\" including taking down old one complete all as specified and as directed.(Make:- Prayag) |
| 25 | S & F in repair Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with white cement complete all as specified and as directed. |
| 26 | S & F in repair acrylic bathroom cabinet box with mirror of size 18\"\"x15\" size complete all as specified and directed. |
| 27 | Demolition and breaking up drain pipes any type set in cement mortar complete all as specified and as directed. |
| 28 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in floor, 75mm bore complete all as specified and as directed. |
| 29 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, 75mm bore complete all as specified and as directed. |
| 30 | S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in walls, 110mm bore complete all as specified and as directed. |
| 31 | S & F PVC (SWR) bend 110mm bore complete all as specified and as directed. |
| 32 | S & F PVC (SWR) floor trap with grating including jointing to solvent cement wast pipe 75mm dia complete all as specified and as directed. |
| 33 | S & F PVC (SWR) Gully trap 125 / 110mm setting and jointing with solvent cement complete all as specified and as directed. |
| 34 | S & F PVC (SWR) vent cowl 110mm complete all as specified and as directed. |
| 35 | S & F PVC (SWR) junction single, (Single T) equal or unequal for 110mm bore pipe with access door complete all as specified and as directed. |
| 36 | S & F PVC (SWR) junction single, (Single T) equal or unequal for 75mm bore pipe with access door complete all as specified and as directed. |
| 37 | S & F PVC (SWR) bend 75mm bore complete all as specified and as directed. |
| 38 | S & F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof Bore of pipe 110mm complete all as specified and as directed. |
| 39 | S & F in repairs rotationals moulded polythylene water storage tanks of capacty 1000 litres (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed and including taking down old tanks |
| 40 | S & F Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed.(Minimum weight 15mm-142gms/ 20mm-210gms/ 25mm-455gms/ 40mm - 690gms) |
| 41 | S & F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 42 | Taking up or taking down steel/ iron tube of 15mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 43 | Supplying and laying of 15mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors complete all as specified and as directed. |
| 44 | Taking up or taking down steel/ iron tube of 20mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 45 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors complete all as specified and as directed. |
| 46 | Taking up or taking down steel/iron tube of 25mm bore and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 47 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in walls/ floors complete all as specified and as directed. |
| 48 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level complete all as specified and as directed. |
| 49 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 50 | Demolition of brick work built in cement mortar including all precast concrete articles complete all as specified and as directed. |
| 51 | Dismantling of wall tiling including cement mortor bedding (but not backing) and removig serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 52 | M & L Non skid ceramic tiles 7 to 8mm thick area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in coloured tiles over and including cement screed 15mm thick in CM 1:4 complete all as specified and as directed. |
| 53 | M & L Non-skid ceramic tiles 7 to 8mm thick area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as in coloured tiles over and including cement screed 15 mm thick in CM 1:4 complete all as specified and as directed. |
| 54 | M & L for glazed ceramic coloured tiles, 350 X 250 x 7 or 450 x 350mm x 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement plaster 10mm thick in CM 1:3 complete all as specified and as directed. |
| 55 | M & L in repair Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed. |
| 56 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exc. 1.5 Sqm but n. exc 4 Sqm each including making good disturbed surfaces complete all as specified and as directed. |
| 57 | -ditto- but area n. exc. 1.50 Sqm complete all as specified and as directed. |
| 58 | Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and as directed. |
| 59 | S & F for 2nd class hardwood plain solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 60 | S & F 35mm thick 2nd class hard wood plain framed panelled (any numbers of panels) with panels of timber flat on both side (feather edged) or of veneered particle board medium density,wood particle board with commercial face veneers; and includinguded make vision panels or peepholes, square or rectangular complete all as specified and as directed. |
| 61 | S & F 30mm thick Factory made 2nd class hard wood glazed & skleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as specified and as directed. |
| 62 | Cutting holes in brick walls exc half brick n.exc one brick, built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type B-1 complete all as specified and as directed. |
| 63 | S & F mild steel FI 25 x 3mm holdfast 300mm long complete all as specified and as directed. |
| 64 | S & F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 65 | S & F to existing door frames 30mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 66 | M & L for 18/19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on two face,fixed to frame work complete all as specified and as directed. |
| 67 | M & L for 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work complete all as specified and as directed. |
| 68 | M & L for melamine polish over wooden surfaces in desired shade including preparation of surfaces complete all as specified and as directed. |
| 69 | S & F in repair 4 lever brass type Mortice lock vertical type size 100mm complete all as specified and as directed. |
| 70 | S & F Anodised aluminium (minimum 50 micron) frame for doors, windows, ventilators, Partitions and grills/guard bars etc with one or more rebates including joining cleat for all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 71 | S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc., complete all as specified and as directed. |
| 72 | S & F Anodised aluminium grill (anodised transperant ordyed to requred shade accordingly to IS: 1868 with minimum anodic coating of grade AC 15) of approved standered section and fixed to the existing window frame with C.P. brass/ stainless steel screw @ 200mm centre to centre, includinguuding the grill to proper opening size for fixing and opration of handles and fixing approved anodised aluminium standered section around the opening , all complete as per requirement complete all as specified and as directed. |
| 73 | S & F stainless steel wire cloth, 0.65mm nominal dia of wire and average width of aparture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 74 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 75 | S & F Butt hinges 100mm, mild steel hinges fixed with stainless steel screw with frame complete all as specified and as directed. |
| 76 | S & F Butt hinges 75mm, stainless steel type, anodised and fixed, complete all as specified and as directed. |
| 77 | S & F Alumininum anodised barrel tower bolts of extruded section 200mm size complete all as specified and as directed. |
| 78 | S & F Alumininum anodised barrel tower bolts of extruded section 150mm size complete all as specified and as directed. |
| 79 | S & F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and as directed. |
| 80 | S & F Extruded aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and as directed. |
| 81 | M & L for preparing new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of Synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 82 | M & L for preparing old wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint complete all as specified and directed. |
| 83 | M & L for preparing old steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of Synthetic enamel paint complete all as specified and as directed. |
| 84 | S & F 25mm dia fancy type chrominum plated dapry rod including bracket and all fittings fixed on wall sample as approved by Engr-in-charge complete all as specified and as directed. |
| 85 | Excavation in trenches n.exc 1.50 mtr wide and n.exc 1.50 mtr in depth for foundation etc, of for manholes getting out in hard/dense soil complete all as specified and as directed. |
| 86 | M & L PCC 1:4:8 using 40mm graded aggregate as in foundation concrete complete all as specified and as directed. |
| 87 | M & L for brick work with flyash bricks, straight or curved on plan exc 6 mean radius with old size bricks built in CM 1:4 complete all as specified and as directed. |
| 88 | M & L for cement concrete type B1, 1:2:4 ( using 20 mm graded stone aggregate) as in coping including necessary form work complete all as specified and as directed. |
| 89 | M & L for Precast reinforced Cement concrete Type B1 1:2:4 (using 20mm graded aggregate) in man hole cover slabs, set in CM 1:4 including necessary formwork complete all as specified and as directed. |
| 90 | M & L for cement concrete type B0 1:2:4 ( using 12.50mm graded stone aggregate) as in benching in Man hole including necessary form work complete all as specified and as directed. |
| 91 | M & L rendring 15mm thick in CM 1:4 on other than fair face of brick work surfaces to be finished fair and even smooth with using extra cement and mix with water proofing compoiund by weight of cement complete all as specified and as directed.(WPC measured seperately a supply only) |
| 92 | Supply only Water proofing liquid |
| 93 | TMT bars 8mm dia , cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 94 | Mild steel round bars 10mm dia cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in rungs and handles complete all as specified and as directed. |
| 95 | M & L for preparing newly plastered wall surfaces and applying two coats of Cement base paint over a coat of primer on walls complete all as specified and as directed. |
| 96 | Reinforced concrete pipes, of 150mm bore class NP-2, laid and jointed complete with collars complete all as specified and as directed. |
| 97 | Concrete bed with cement concrete 1:3:6 type C2 using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested of 150mm bore complete all as specified and as directed. |
| 98 | Returning, filling in including spreading levelling watering and well ramming in layers n.exc 25cm thick of soils complete all as specified and as directed. |
| 99 | Removing excavated soil to a distance n.exc 50 mtr and depositing where directed complete all as specified and as directed. |
| 100 | M & L for reinforced cement concrete type B1, 1:2:4 using 20mm graded stone aggregates in slabs supported on walls |
| 101 | M & L for PCC 1:4:8 (type D2), 75mm thk as in sub base complete all as specified and as directed. |
| 102 | M & L for sand cushion including watering and consolidation complete all as specified and as directed. |
| 103 | Machine pressed pre-cast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade, with grey cement and no pigment complete all as specified and as directed. |
| 104 | 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in plinth protection and PCC path finished even and smooth with out using extra cement including forming and filling of joints with bituminous filler complete all as specified and as directed. |
| 105 | M & L in repair Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 15 mm thick screed bed in CM 1:4 rounding to edges of granite/ stone slabs one edge such as steps/ cooking platfoorm and other similar situation complete all as specified and as directed. |
| 106 | Taking down plants/vegetaion from wall upto roof level by means of cutting holes into brick wall and making good the surfaces of dismantling portion n.exc 150Sqcm superficial area and n.exc on brick deep by PCC 1:3:6 type C1 , and plastering in CM (1:4) of disturb portion and applying two coats of cement based paint to match the existing surfaces height upto 4th floor and complete all as specified and as directed. |
| 107 | M & L for Post constructional Anti - termite treatment along the external wall below concrete or masonry apron / plinth protection using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc., in apron using Chloropyriphos20 EC complete all as specified and as directed. |
| 108 | M & L for Post constructional Anti - termite treatment of voids in masonry using chemical emulsion @ one litre per hole, 300mm intervals including drilling holes at 45 degree and replugging them with CM 1:2 to match the existing floors using Chloropyriphos20 EC complete all as specified and as directed. |
| 109 | M & L for providing and injecting chemical emulsion Chlorophyriphos 20% EC for post construction anti termite treatment at points of contacts of wood works i.e. door/ wooden windows/ wooden cupboards with masonry using chemical emulsion @ 0.5 ltrs per hole by drilling holes of 6mm dia at downward Angle of 45 degree at 150 c/c, and plugging with CM 1:2 mixed with colour pigment to match existing surfaces and making good complete all as specified and as directed. |
| 110 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit complete all as specified and as directed. |
| 111 | M & L for Point wiring complete with 1.5 sqmm FRLSH single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telphone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting n.exc 10 Cm girth complete all as specified and as directed. |
| 112 | One light point controlled by one switch. |
| 113 | One Ceiling fan point controlled by one switch and one regulator. |
| 114 | One 3 pin 5 amps switch socket on independent board. |
| 115 | One 3 pin 5 amps switch socket on same board along with other switches. |
| 116 | One exhaust point controlled by one switch |
| 117 | One two way point controlled by two switches |
| 118 | One bell point controlled by bell push switch on independent board. |
| 119 | All as per item No.111 above but with 4 sqmm FRLSH copper conductor cable with 2.5 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board complete all as specified and as directed. |
| 120 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping including accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed. |
| 121 | M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 10 sqmm including one run of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping including accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed. |
| 122 | S & F Wall mounted LED 20W Batten Basic all purpose surface and wall mounted LED batten with Aluminium housing & Integrated electronic driver complete all as specified and as directed. |
| 123 | S & F wall mounted LED batten,Extruded aluminium housing provided efficient heat disipation with polycarbonate diffuser with integrated electronic driver high efficacy.short circuit & voltage cut off protection, wide opearting voltage range of 140V to 270V wide, lumen output of 1050,10W including lamp with complete all as specified and as directed. |
| 124 | S & F Endura PEARL 30W MP Bldg Sec lights New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminarie with high power LEDs as light source and electronic driver of Lamp type:30W LED 6000K alongwith Suitable bracket complete all as specified and as directed. |
| 125 | Supply and replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 240 Volts 20 Amps complete all as specified and as directed. |
| 126 | S & F MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed. |
| 127 | S & F RCBOs For Earth Leakage, Overload & Short- Circuit Protection Double Pole, 30mA 230 volts, 40 amps Capacity including taking down Old MCB complete all as specified and as directed. |
| 128 | S & F MCB SP 230 volts,40 amps \"C\" Curve 10 kA Capacity including taking down Old MCB complete all as specified and as directed. |
| 129 | S & F Ceiling rose surface bakelite 65mm x 50mm two to three terminals complete all as specified and as directed. |
| 130 | S & F Modular switch 1 way 6A, 1 module, 240 Volts complete all as specified and as directed. |
| 131 | S & F Modular switch 1 way 16A, 1 module, 240 Volts complete all as specified and as directed. |
| 132 | S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 133 | S & F Modular socket 6 A/ 16 A - 2/3 pin combined 2 complete all as specified and as directed. |
| 134 | S & F Modular switch 2 way 6A, 1 module, 240 Volts complete all as specified and as directed. |
| 135 | S & F Modular Bell push, flush type, 5 amp complete all as specified and as directed. |
| 136 | S & F bell ding Dong 230V AC single pole complete all as specified and as directed. |
| 137 | S & F Modular Fan step regulator, 100W - 1 module for ceiling Fan of 1200 mm sweep complete all as specified and as directed. |
| 138 | Disconnection and taking down Old Geyser and deposite it to MES store safely.S & F Geyser ( Electric storage water heater), electric operated, AC, 230 Volts, 50Hz of capacity 25 litres,Vertical type Energy efficient 5 star rating of suitable storage tank including incoming & out going PVC connection pipe of suitable lengh for Hot water and cold water, washers, On/ Off thermostat control knob,Indication lights etc all as per IS specification complete all as specified and as directed. |
| 139 | Taking down Ceiling/ Exhaust fan, sealing cable end, dismantling blades and removing fan and blades to and depositing it to MES store yard without any damage. It includinguded the charges of transporation of fan and labour cost etc., complete all as specified and as directed.(Note:- Old Unservicable Fan to deposited to MES Store) |
| 140 | S & F in replacement of ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor 230 volts 3 blades white in colour complete with canopy, suitable down rod complete all as specified and as directed. |
| 141 | S & F in replacement of ventilating fan of size 250mm sweep white in colour, plasitic body complete all as specified and as directed.Make:- Havells or equivalent in Bajaj/ CG/ Usha |
| 142 | S & F ventilating (Heavy duty Exhaust Fan) fan of 300mm sweep,1400 RPM Metalic Body ,Double Ball bearing single phase including necessary addn/altn for fixing of fans including making holes in wall/windows all as per site requirement and making good the disturbed surfaces, matching with the existing wall complete all as specified and as directed. |
| 143 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc complete all as specified and as directed. |
| 144 | Removing excavated material (soil) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed. |
| 145 | Returning filling in soil including spreading levelling watering well ramming in layers n.exc 25 cm each complete all as specified and as directed. |
| 146 | Supply & Lay cable XLPE insulated screened PVC bedded, gaivanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts including with stranded aluminium conductor with in and including suitable size of HDPE heavy duty pipe grade of following sizes complete all as specified and as directed. |
| 147 | (a) 4 core 25 Sqmm |
| 148 | Note:-i) Lugs and glands are deemed to be includinguded in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board.ii) Earth work such excavation, refilling, etc. shall be measured separately under relevant items. |
| 149 | S & F of tubes light grade of size 40 mm dia galvanised with all fittings and fixed complete to walls and ceiling or laid in treanches, fixed on pole /under road crossing or passing through gutters etc including necessary road cutting and making good with PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) complete, including taking down old u/s GI tubing complete all as specified and as directed. |
| 150 | S & F main meter board wall mounted vermin proof factory made Indoor type fabricated 2.0mm sheet door fixed hinges on angle iron frame and complete with locking arrangement and painted with two coats of synthetic enamel paint over one coat of red oxide primer suitable for 3 phase 415 V busbar-160 Amps, 50 Hz, 3 Phase 4 wire Aluminium Busbar complete all as specified and as directed. |
| 151 | i) Incoming:-(a) 63A 4 pole 25 kA MCCB -01 No(b) Busbar 160A with TPN & Earth-1 Noii) Outgoing:-(a) MCB SPN 63A -05 No\"s( 01 Spare)(b) 16 Amp SP, 10 kA MCB - 1 No\"s(c) Electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWHr including all connected connection complete all as specified and directed by Engr-in-charge - 05 No\"s (Old Meter deposited to MES Store yard GE STM) |
| 152 | M & L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B-1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed. |
| 153 | Surface excavation n.exc(not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard dense soil complete all as specified and as directed. |
| 154 | Hard core of gauge n. exc 63mm depositing, spred and levelled in layers n.exc 15cm thick watering and ramming to true surface with broken stone boulders complete all as specified and as directed. |
| 155 | Demolition of unreinforced Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposed off from site complete all as specified and as directed. |
| 156 | M&L 25mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) complete all as specified and as directed. |
| 157 | Chequered coloured cement concrete tiles Glossy finished of size 300 x 300 x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified and as directed. |
| 158 | Cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and as directed. |
| 159 | Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including poining in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick screed bed in cement mortar 1:3 complete all as specified and as directed. |
| 160 | Removing excavated materials to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 161 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
