|
| 1 | Excavation in foundetion in ordinary Soil ( Loam clay or sand) including lift upto 1.5m \"ead upto 30.0 m & including filling watering and ramming of excavated earth into the space between the building & sides of foundation trenches or into the plinth and removal & disposal surplus earth as directed by the engineer 1/C within a lead of 30 m.from foundation trenches..2.8 1/DSR |
| 2 | Cement Concrete with 4 cn gauge approved stone grit, coarse sand & cement in the proportion of 1:4:8 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. 4.1.8/DSR |
| 3 | RC.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in lintels of door & windows excluding supply reinforcement and its bending, but including its fixing and binding sane with 24 B. W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. but in R.C.C. in 1:1½:3 (Colum: and T-Beam)......5.33.2.2/DSR |
| 4 | R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in Slab excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B. W.G.G.I, binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra Si no 284.a but for slabs in 1:1.5:3 5.33.2.2/DSR |
| 5 | M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. |
| 6 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators,side /top /centre hung with beading and all nembers such as F7D,F4B, K11 B, K12 B etc, complete of standard rolled steel section, joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges, pivots, priming coat ofapproved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). 10.11.1/DSR |
| 7 | M-150 Brick Work in in 1:4 (One cement & four Corse sand) mertar in super structure I including supply of all materials labour, Tools & plants etc. required for proper completion of the work...DSR.6.1.1 |
| 8 | 12 mm thick plaster with cement and fine sand of 1.25 fineness modules 1:4 over brick work minimum thickness not to be less than Icm including supply of all materials, labour, tools & plants etc. required for proper completion of the work..... 13.1.1/DSR |
| 9 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red..8.2.2.1/DSR |
| 10 | Supply & fixing of 35mm thick indian commercial flush door shutter including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings but excluding their supply and including painting with two coats of black Japan on all iron fitting if necessary. Including fixing the glass panes with putty for bradglass and glass to be 4 mm, thick. Fitting with necessary screws to be supplied by the deptt. Indian commercial flush shutters 32mm. thick (excluding cost of all fitting)....9.21.1/DSR |
| 11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding 9.48.I/DSR |
| 12 | Providing and fixing stainless steel (Grade 304) railing made of Hollow rubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer- in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) 10.28/DSR |
| 13 | Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod......9.10.4/DSR |
| 14 | Approximate cost of ISI marked oxidized iron fitting with screws door & windows etc...... (SI No. 473/2022) |
| 15 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 150 mm.....9.82/DSR |
| 16 | Providing and fixing pressed steel door frames conforming to 1S: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile E Fixing with adjustable lugs with split end tail to cach jamb... 10.14.1.1/DSR |
| 17 | Providing wall putty on New surface with approvel quality material of Berger/J.K./Birla or similar make 2 coats complete work ...13.80/DSR |
| 18 | Wall painting Two coat with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture,including applying additional coats wherever required to achieve even shade and colour 13.45.1/DSR |
| 19 | Painting roofs or other iron work in large areas with one coat priming and on e coat of approved (above one Sq. Metre) paint (British antesol or equivalent) including supply of all materials,labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI Marked. 13.48/DSR |
| 20 | Providing and fixing false ceiling at all height including providing and fixing of frame made of special sections power from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 m dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.J. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 150 mm centre to centre, shall be fixed in a direction perpendicular to G.I. internediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with |
| 21 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand morter finished with in its cement colour slurry, jointing and polished of approved quality complete, including supply of all materials, labour, tools and plants etc. required for proper completion of the work. as per direction of Engineer in- charge........ 11.41.2/DSR |
| 22 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-incharge Size of Tile 600x600 mm 11.48.2/DSR |
| 23 | Supply and fixing 6 mm. (\") China white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and Tools and Plants. 8.3.1/DSR |
| 24 | Providing and laying gola 75x75 mm in cement concrete 1:2:4 including finishing with cement mortar 1:3.: In 75x75mm deep chase.... 12.21.1/DSR |
| 25 | Providing and laying \"brick coba\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cm x cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and iunction and corner shall be rounded by brick ballast cement and coarse sand masonary Coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all material, labour, T&P etc complete for proper completion of work.....22.7,1/DSR |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:. White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap . White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. 21.16/SOR |
| 27 | Providing and fixing P.V.C. waste pipe for sink or wash basin including PVCwaste fittings complete.Semi rigid pipe 32 mm dia / 40 mm dia 17.28.2.1/DSR |
| 28 | Providing and fixing C.P. brass long nose bib cock of approved quality confirming to ISI standards and weighing not less than 810 gms.) 15mm nominal bore.. 18.15.1/DSR |
| 29 | Providing and fixing C.P. brass bib cock of approved quality confirming to IS:8931 15 imm nominal bore....... 18.15.1/DSR |
| 30 | Providing and fixing ball valve (brass)ISI marked approved quality complete, High & low pressure with plastic floats complite as per direction of Engineer-in-charge. b) 20 mm nominal bore... 18.18.1/DSR |
| 31 | Providing and fixing brass stop cock ISI marked approved quality as per direction of Engineer-in-charge. b) 20 mm nominal bore.... 18.15.1/DSR |
| 32 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931... 18.53.1/DSR |
| 33 | Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.... 17.16A/DSR |
| 34 | Providing and fixing square-mouth S. W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with Iframe of 300x300 mm size (inside) the weight of cover to be not less than 14.50kg and frame to be not less than 2,70 kg as per standard design.150x100 mm size p type with common burnt clay (non modular) bricks of class-150..... 19.20/DSR |
| 35 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C. pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.... 17.3/DSR |
| 36 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mmand 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete,including painting of fittings and brackets, cutting andmaking good the walls and foors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern......... 17.4.1/DSR |
| 37 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked(Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge.....18.48/DSR |
| 38 | Supply and fixing of 10.0 cm. PVC down pipe.(kissan/suprime make) make complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3 mm. (1\" x1/8\") fixed to walls with cement motar (1:2) and including supp.y of 15 cm (6\") long 6mm. (1/4\") dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes... MATERIAL730A/DSR |
| 39 | providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineerin-Charge. External work. i) 100 mm dia. nominal outer dia Pipes.....NS-10/DSR |
| 40 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend. 12.42.5.2/DSR |
| 41 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 110 mm....... 12.43.2/DSR |
| 42 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thernal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- Charge. Concealed work, including cutting chases and making good the wall etc. a) 15 mm dia. nominal outer dia Pipes.......18.8.1/DSR |
| 43 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in- Charge Concealed work, including cutting chases and making good the wall etc. b) 20 mm dia. nominal outer dia Pipes........ 18.8.2/DSR |
| 44 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC colvent cement and the cost of cutting chases and making good the same lincluding testing of joints complete as per direction of Engineer-in- Charge. Concealed work, including cutting chases and making good the vall etc. c) 25 mm dia. nominal outer dia Pipes.... 18.8.3/DSR |
| 45 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 nn thick hard board ground fixed to wooden cleats with C.P. brass screws nnd washers complete... 17.31/DSR |
| 46 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiting fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S, sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.... 10.18/DAR |
| 47 | Wiring point for light in PVC conduit with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable. S.I.NO. 138 (C) |
| 48 | Wiring point for fan/ fresh air fan (light duty exaust fan) in PVC conduit with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable. S.I.NO.140 (C) |
| 49 | Wiring point for Samp plug in PVC conduit with 1.5 sq. mm. FR PVC insulated multistrand copper conductor cable. S.I.NO.178 (C |
| 50 | Supply and fixing of power plug with 15A/250 volt flush type switch and 5 pin 15A/250V flush type universal socket in suitable M.S. box. S.I.NO.1139 |
| 51 | Supply and fixing of 6amp to 32 amp SPMCB (10KA) C curve (Cat-A) S.I.NO.1002 |
| 52 | Supply & Fixing surface/Flush mounting 8 ways SPN distribution board without additional metal door withiout MCB. Cat C. ..S.I.NO.1024A |
| 53 | S&F of 40 Amp. S.P. Isolator (Cat B) S.I.NO.1004(A) |
| 54 | Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S.sheet of 175 x 100 x 65 mm size duly painted with red oxide primer and flushed in wall. (S.I.NO.161) |
| 55 | Supply and fixing of switch box made up of 16 SWG (1.5 mm) thick M.S.sheet of 100 x 100 x 65 mm size duly painted with red oxide primer and flushed in wall. (S.1.NO.159) |
| 56 | Supply and burying of electrode of 600mX600mmX3mm.. S.I. N.o 708 |
| 57 | Add for invertor wiring in wiring point for light/fan plug with 1.5 mm wire S.I. NO..189(A) |
| 58 | Supply and wiring of 25mm dia heavy duty (2mm thick) PVC conduit with 2 nos 4 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire........ S.I. NO. 262 |
| 59 | S/F of PVC conduit pipe 25 mm dia in Roof and walls. Complete in all respect. .....S.I. NO 185(III) |
| 60 | S/F of hexagonal fan box with hexagonal side of approx 80 mm in length fabricated from 16 SWG M.S. sheet.(S.I. NO. 1149) |
| 61 | Supplying & Laying of 32mmx6mm copper.....S.I.NO.714(A) |
| 62 | Supply and wiring of 2 nos 2.5 sq.mm. FRLSH but in 25 mm dia heavy duty (2 mm thick) PVC conduit FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable. (S.I. no 261 C) |
| 63 | Supplying & fixing of 22 watt LED tube set |
| 64 | Supplying & fixing of 12 LED sqare indoor mounting for ceiling |
| 65 | soil testing and frame stell structure design |
| 66 | Providing and fixing granite sign board with ss frame Please Enable Macros to View BoQ information |
