Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | CIVIL Work |
| 2 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm andsecondaryintermediate cross-T of size24x32 mm of length 600 mm to formgrid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6 mm thick with precut hole on both 25 mm flange to pierce into 12x50 mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge.With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles |
| 3 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 4 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019,to be laid on existing Framed T-Grid section. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge.With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles |
| 5 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid on Existing Grid. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 6 | Providing and fixing internal wall panels on Light gauge steel frame work with 12.5 mm thick gypsum plaster board conforming IS 2095:2011 fixed on cement board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60 cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately Cement Bonded particle board 8 mm (Termite, Fire & Moisture Resistance), as per IS:14276 : 1995 |
| 7 | Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make |
| 8 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge75 mm average thickness |
| 9 | In-filling / sealing of joint between RCC lintel cum sunshade and wall (on external side) in all floors by pushing in Grout RW/equivalent in paste form and coving 20 mm x 20 mm after applying a coat of Zycosil/equivalent & zycoprime/equivalent solution before cement plastering of top, bottom and sides of RCC sunshade. |
| 10 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm withtapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specificationand also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin- charge and as per manufacturer’s specification, with all 4 sides tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 11 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 12 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand andwherever required to achieve even shade and colour.manufacture, including applying additional coatsTwo coats |
| 13 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap |
| 14 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 15 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 16 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 17 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape required size |
| 18 | Providing and fixing stainless steel (SS 304 grade) toilet paper holder |
| 19 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 20 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 21 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 22 | Providing and fixing SS towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 23 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore |
| 24 | Providing and fixing brass bib cock of approved quality : 20 mm nominal bore |
| 25 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 26 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe - 40 mm dia |
| 27 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 28 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 29 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm |
| 30 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm |
| 31 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 32 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 33 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 34 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge |
| 35 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 36 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws |
| 37 | Providing and fixing bright finishedstainless steel (SS 304 grade) tower bolts (barrel type) with necessary screws etc. complete :250x10 mm |
| 38 | Providing and fixing stainless steel (SS 304 grade) hanging floor door stopper, ISI marked,transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper |
| 39 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 40 | Providing and fixing stainless steel (SS 304 grade) handles with screws etc. complete: 125 mm |
| 41 | 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) |
| 42 | Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS :12894, in super structure above plinth upto floor V level.Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 43 | Providing & fixing in position Phenol bonded Bamboo wood in wall skirting with planks of sizes 14 mm thick, 1900 mm length (minimum) and 85 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The skirting shall be fixed with SS screws & rawl plugs, over underlayment of 4 mm thick, expanded polyethylene foam sheets having 40 kg/cum density over prepared surface. The bamboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. |
| 44 | Providing & fixing in position Phenol bonded Bamboo wood wall cladding at all height with planks of sizes 10 mm thick, minimum 1800 mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC), with necesasary profiled edges fixed with 40 mm SS screws 5 nos in each tile to frame work made of second class teak wood of size 20x15 mm in centre of each tile and bottom and top of work height, 40x15 mm placed at ends of each tile. The cladding shall be laid over backlayment of 1.00 mm thick expanded polyethylene foam of density 40 kg/cum in two layers, first layer on wall surface before fixing wooden frame and second layer on frame under cladding. The bamboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge. |
| 45 | Providing and placing “Stay in Place PVC Wall formwork” made up of extruded Unplasticised Poly Vinyl Chloride (uPVC) consisting of Main panel, 3 way Connector, Starter Channel, Joint Panel, Connection Panels, Door/Window frame/trim panels etc. all complete as per manufacturerdesign and for all heights as per direction of Engineer-in-charge. (Note: Suitable for in fill walls with appropriate Structural system). 125 mm wide Stay in Place PVC Wallform made of minimum 2.50 mm thick sections and minimum weight 21.97 kg /sqm of formwork. |
| 46 | Providing and fixing ISI marked SS 304 tublerhandles for Glass door: 600mm long |
| 47 | Providing and fixing ISI marked SS 304 hydrolic door stopper for Glass door |
| 48 | Providing installation & fixing of ISI marked Vinyl Flooring with approved color, design & thickness. Fix with chemical/solution required & provide smooth finishing at corners make approved & guideline of EOI. |
| 49 | Providing and fixing of classic system Blackout fabric Roller Blinds which should be made up of 100% Polyester with Acrylic coating resistant to cracking and fraying. It should have 100% blackout rate. The fabric should be min 0.52mm (+5%) and having min weight 358 g/sqm (+5%). Light Fastness >= 6.Can be installed (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Fixing Brackets are made by steel with powder coating to give greater finish. Brackets shall be accommodating overhead or side mounting with clutch assembly on either end of the blind.The ROLLER TUBE shall be of extruded by non-rusting Aluminum alloy with 1.25 mm thickness, with anodized for long life. Available in 32-40mm dia metre for small and big blinds respectively. Aluminium bottom bar with powder coating: 55 microns or anodyzing 10 microns. 5 colour option available. Wall thickness: 1mm. Width 15mm, Height 30mm, Weight: 300gm /rmtr (+5%). For a perfect fall of fabric to avoidwarpage/ floating.Installationtobeinserttypewithendcapstogiveaneatlook. OperatingChain: #10plastic/steelballchain(oraspermanufacturer\"sstandard)adoptabletothe clutch pitch for smooth, quietlifting & lowering of blind. The blind can be stop in desire position with help ofstop lockused forraisingor lowering action of the shades. The fixing arrangements as per approved make manufacturer specification all complete as per direction of Engineer-in-charge. (Area shall measured from bracket to bracket and from top to bottom). |
| 50 | HVAC WORK |
| 51 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 degree C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 degree C (out door ambient\ temperature).1.5 TR with 5 Star BEE Rating |
| 52 | Supplying , Installation, Testing and Commissioning of Air Cooled Hi Wall split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180- 260V with low & high voltage cutoff and 50 hz ,1 phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 degree C. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS 694 or IS 9968 temperature sensing control IS /International Electrotechnical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per CPWD specification and IS : 1391 Part II 2023. The system shall be able to operate up to 50 degree C (out door ambient\ temperature).2 TR with 5 Star BEE Rating |
| 53 | Supplying, Installation, Testing and Commissioning of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A/R-407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, 50 Hz ,1 /3 phase AC supply, including surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU), copper power and control cable upto 5.5 Mtr (IDU to ODU) including drain pipe, the system shall be capable of performing cooling, dehumidification, Air circulation, filteration & ventilation of following capacity with Scroll/rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB) asspecified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per International Electrotechnical Commission (IEC) 17025 standards/Central Power Research Institute (CPRI)/ Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification and as per IS: 1391 as required.2.5 TR with 5 Star BEE Rating |
| 54 | ELECTRICAL WORK |
| 55 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C |
| 56 | Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 57 | Wiring for light/ power plug with 4X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 Nos. 4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 58 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 59 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 60 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 61 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 62 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 63 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 64 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 65 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 66 | 5/6 amps switch |
| 67 | 15/16 A switch |
| 68 | 6 pin 15/16 A socket outlet |
| 69 | Bell push |
| 70 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 71 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required |
| 72 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 73 | LED Down lighter (SMD Type) (System lumen efficacy ≥120<135lm/Watt) Supplying, installation, Testing & Commissioning of LED Recessed/surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body including trim .18 watt |
| 74 | LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm) - 36 watt |
| 75 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way (4 + 24), Double door |
| 76 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 77 | 25 A |
| 78 | 40 A |
| 79 | 63 A |
| 80 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 81 | 25A |
| 82 | 40A |
| 83 | 63A |
| 84 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 85 | Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep |
| 86 | Supplying and fixing of Steel/PVC conduit as per requirements along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit |
| 87 | IT Works |
| 88 | A) Active Components |
| 89 | Core Switch (48P PoE+, L3, 10G) |
| 90 | Access Switch (24P PoE+) |
| 91 | Wi-Fi 6 Indoor Access Point |
| 92 | Enterprise Router (WAN failover) |
| 93 | Wireless Controller / Cloud License |
| 94 | SFP+ 10G Modules |
| 95 | Rack Mount KVM |
| 96 | UPS (2–3 kVA, online) |
| 97 | PoE Surge Protectors |
| 98 | B) Passive Components |
| 99 | Cat6a UTP Cable |
| 100 | Cat6 Patch Cords (1–3 m) |
| 101 | Cat6a Patch Panel (48-port) |
| 102 | Cat6a Patch Panel (24-port) |
| 103 | Rack (42U) |
| 104 | Rack PDU (Surge protected) |
| 105 | Cable Trays / Ladders |
| 106 | RJ45 Connectors & Faceplates |
| 107 | Labels & Cable Management |
| 108 | Grounding Kit |
| 109 | MODULAR FURNITURE |
| 110 | Manufacturing, providing and placing in position machine made factory assembledCabin Table of approve make(as per finally approved sample by department) of following dimensions with the following specifications. JS Cabin Table Low height back storage:Body of storages made out 19 mm thick (E1 Grade)particle board with 0.4mm veneer with PVC edge-banding. shutter madeout of E1 grade MDF to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than ( |
| 111 | Manufacturing, providing and placing in position machine made factory assembledCabin Table of approve make(as per finally approved sample by department) of following dimensions with the following specifications. JS Cabin Table Low height back storage:Body of storages made out 19 mm thick (E1 Grade)particle board with 0.4mm veneer with PVC edge-banding. shutter madeout of E1 grade MDF to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than ( |
| 112 | Manufacturing, providing and placing in position machine made factory assembledDirectorCabin Table ( Lvl 12-13) ofapprove make(as per finally approved sample by department) of following dimensions with the following specifications. Providing & Placing Cabin Table with side unit with following details and specification :-Main Table:- Whose top and legs are made of 36mm. thick E-1 grade particle board, melamine finishes with matched 2 mmProv PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions ( |
| 113 | Manufacturing, providing and placing in position machine made factory assembledDirectorCabin Table ( Lvl 12-13) ofapprove make(as per finally approved sample by department) of following dimensions with the following specifications. Providing & Placing Cabin Table with side unit with following details and specification :-Main Table:- Whose top and legs are made of 36mm. thick E-1 grade particle board, melamine finishes with matched 2 mmProv PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions ( |
| 114 | Manufacturing, providing and placing in position machine made factory assembledCabin Tableof approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing of PSCabins Tables with following details and specification : -Providing and placing table Whose top and legs are made of 25mm. thick E-1 grade particle board, melamine finishes with matched 2 mmProv PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions ( |
| 115 | Manufacturing, providing and placing in position machine made factory assembledCabin Tableof approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing of PSCabins Tables with following details and specification : -Providing and placing table Whose top and legs are made of 25mm. thick E-1 grade particle board, melamine finishes with matched 2 mmProv PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions ( |
| 116 | Manufacturing, providing and placing in position machine made factory assembled Cabin Table of approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing Cabin table Main Table 1500W x 600D x 740Hmm, Return Table :900W x 450D x740-760Hmm Whose table whose top and legs are made of 25mm. thickparticle board(E-1 Grade), melamine finishes with matched 2 mm PVC edge-banding, melamine finishes with matched 2 mmProv PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions ( |
| 117 | Manufacturing, providing and placing in position machine made factory assembled workstation of approve make(as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing Hybrid Panel based Workstations with following specifications:Frame Work, Partition and Cable management : Frame work shall consist of main spine and return spine of aluminium extruded section of minimum thickness of 1.2 mm. The overall thinkness of Panel base System should be minimum 60-70 mm.The thickness of mainspine partition panel should be minimum 60-70 mm and & Return spine partition panel should be minimum 25-30 mm. The panel will be hollow inside to accommodate wiring for electrical/data and outer frame of panel should be made of extruded aluminium.The panel shall be made up of 3 mm thick MDF both sides of the wooden frame to create the hollow for the wire management. The panel outer aluminium frame is designed in such a way that it can be easily slide in to the columns/ Connectors by means of stacking one over the other. Horizontal race way should be 150-170 mm height aluminium profile. There shall be complete cable management arrangement with openable raceway above/ below worktop with provision for fitting electrical/data switches and holes for passing cable.Panel Finishes : Finishes of panel above the worktop can be fabric pinup/fabric/laminate + Glass/metal writable markerboard or single finish tile with raceway on main spine. Finishes of main spine panel below the worktop the hollow panel should be made of MDF tile and 0.5mm thick steel sheet pasted on MDF which is powder coated with EPC finish 80-90 microns for durability on the inside as well on the outside. Raceway can be provided above/below the worktop.Connectors/ Brackets: End Post: Aluminium 60-70 mm width – 1180-1220 mm height.Two way post: Aluminium 30-70 mm width –1180-1220 mm height., Three way post: Aluminium 30-70 mm width –1180-1220 mm height. Four way post: Aluminium 30-70 mm width – 1180-1220 mm height.Brackets: Table top supported with 50-60mm width steel bracket. Table top to table top connector: 150-170 mm Width x 120-140 mm Depth width connector.Worktop :Worktop made of 25mm thick E-1 gradeparticle boardfinished with 2mm ABS edge banding. E1 grade laminate with zero urea formaldehyde emissions ( |
| 118 | Manufacturing, providing and placing in position machine made factory assembled Meeting Rooms Table of approve make(as per finally approved sample by department) of following dimensions with the following specifications.Providing & Placingof Conference Table 6 Pax Meeting Table: 2200W x 1000D x 740-760Hmm , whose top and legs are made of 36 mm. thick E-1 grade particle board, melamine finishes with matched 2 mm PVC edge-banding.E1 grade laminate with zero urea formaldehyde emissions ( |
| 119 | Manufacturing, providing and Placing High Back revolving chairs forCourt RoomMain Chairof approve make(as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing in position high back chair for Cabins with comfortable Backrest,The seat shall be made up of 12mm thick hot pressed plywood & upholstered with leatherite and moulded medium density foam.Overall dimensions of Chair shall be, Width of Chair - 640mm, Depth of Chair - 645mm, Height of Chair-1185-1245mm as measured till pedestal . The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-510+10m, H-715mm & size of seat shall be W-520+10 mm x D-450mm x H-473-533mm. Medium densityfoam should be used in making seat & back which shall be moulded with density 45kg/m ³ and hardness load 16kgf. The seat and back should be arrested together with spine made of 8mm thick HR steel and should be powder coated in black with 40-60 micron . The fixed armrest are made of aluminuim with PU padded. The mechanism of the chair shall have following features : 360 degree swivel type, Knee Tilt mechanism, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort,multiple locking position. Gas lift allows 10mm of height adjustment. The pedestal shall be made of die-cast aluminium base. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 670mm pitch-centre-dia 700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color.Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 Years warranty. |
| 120 | Manufacturing, providing and Placing Mid Back revolving chairs forCourt RoomMid back visitor Chairof approve make(as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing in position Mid back chair for Cabins With comfortable Backrest. The seat shall be made up of 12mm thick hot pressed plywood & upholstered with Leatherite and moulded medium density foam.Overall dimensions of Chair shall be, Width of Chair - 640mm, Depth of Chair - 620mm, Height of Chair-1000-1065mm as measured till pedestal .The back shall be designed with contoured lumber support for extra comfort. Size of back shall be W-490+10m, H-530mm & size of seat shall be W-500+10 mm x D-450mm x H-470-530mm. Medium densityfoam should be used in making seat & back which shall be moulded with density 45kg/m ³ and hardness load 16kgf. The seat and back should be arrested together with spine made of 8mm thick HR steel and should be powder coated in black with 40-60 micron . The fixed armrest are made of aluminuim with PU padded. The mechanism of the chair shall have following features : 360 degree swivel type, Knee Tilt mechanism, Seat & back tilting ration of 1: 1.5, Front pivot for tilt with feet resting on ground ensuring more comfort,multiple locking position. Gas lift allows 10mm of height adjustment. The pedestal shall be made of die-cast aluminium base. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 670mm pitch-centre-dia 700-720mm with castors). The twin wheel castors shall be made of Nylon injection moulded in black color. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty. |
| 121 | Manufacturing, providing and Placing High Back revolving chairs for Cabin Main Chairof approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing High Back chairs Cabin-2(PS). The seat is made up of 12mm thick hot pressed plywood measured covered with ABS back and The Back is made up of injection molded glass filled polypropylene & upholstered using Net fabric with high tenacity, while the seat has high resilience polyurethane foam is molded with density approx... 55+/-2 kg/m3 and hardness 16 ± 2 kgf . The chair should be provided with the armrest having an Up-Down adjustment of approx. 8 ± 0.5cm which is provided in armrest structure along with 4 D movement, armrests top has an integrated layer of Thermoplastic Elastomer (TPE) to give padding to them. The chair should have a specially designed Lumbar support consists of polypropylene pad. The Height of Lumbar pad can be adjusted up and down using the sliding space given. The chair is provided with weight balance mechanism with seat slider operating the functions with two point control (Front pivot tilt with feet resting on ground, Tilt tension adjuster) and 4 position locking with anti-shock mechanism. The pneumatic height adjustment should have adjustment stroke of approx. 10 cm. and the pedestal should be injection molded in black 30% glass- filled Nylon and fitted with 5 nos. twin wheel castors. DIMENSIONS : WIDTH 750mm X DEPTH X HEIGHT 980mm – 1050mm X SEAT HEIGHT 450 – 550mm . Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty. |
| 122 | Manufacturing, providing and Placing Mid Back revolving Visitor chairs forCabin) of approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and placing Mid Back chairs forCabin-2 (PS). The seat is made up of 12mm thick hot pressed plywood measured covered with ABS back and The Back is made up of injection molded glass filled polypropylene & upholstered using Net fabric with high tenacity, while the seat has high resilience polyurethane foam is molded with density approx... 55+/-2 kg/m3 and hardness 16 ± 2 kgf . The chair should be provided with the armrest having an Up-Down adjustment of approx. 8 ± 0.5cm which is provided in armrest structure along with 4 D movement, armrests top has an integrated layer of Thermoplastic Elastomer (TPE) to give padding to them. The chair should have a specially designed Lumbar support consists of polypropylene pad. The Height of Lumbar pad can be adjusted up and down using the sliding space given. The chair is provided with weight balance mechanism with seat slider operating the functions with two point control (Front pivot tilt with feet resting on ground, Tilt tension adjuster) and 4 position locking with anti-shock mechanism. The pneumatic height adjustment should have adjustment stroke of approx. 10 cm. and the pedestal should be injection molded in black 30% glass- filled Nylon and fitted with 5 nos. twin wheel castors. DIMENSIONS : WIDTH 750mm X DEPTH X HEIGHT 880mm – 980mm X SEAT HEIGHT 450 – 550mm . Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty. |
| 123 | Manufacturing, providing and Placing Mid Back revolving chairs (as per finally approved sample by department) of following dimensions with the following specifications.Amigo Chair Providing and placing in position medium back Revolving Chair, Overall Chair size: 460-480W x 455-480Dx 1000-1100Hmm ,Backrest :The outer frame of the backrest made of injection moulded in black 20% Glass Filled Polypropylene and inner frame made up of injection moulded in black polypropylene. Inner frame upholstered with mesh fabric then assembled with outer frame. The back has fix lumber support for achieving comfortable seating posture. Lumber support made up of injection moulded in black P.P. Lumber support size 280 mm (W) x 140 mm (H). Backrest size 570-590 mm (H) x 490-510mm (W). Spine made of reengineered black nylon.Seat : The seat is made up of 12 mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric. The bottom cover made up of injection moulded in black PP to cover the plywood. Seat size 455-470mm(W) x 450-470 mm (D). Seating height is min.440mm and maxi. 540 mm respectively. Seat Foam: Foam made out of moulded polyurethane foam with the following properties. Average thickness of 55-65 mm with the following properties: Density: 45 Kg/M³ or more , Hardness: 25±/3 KGF ,Compression Set: 10% Max ,Tensile Strength: 0.90 to 1.2 Kg/Cm² ,Resilience: 40%-60% ,Comfort / Indentation Hardness: 15.4 ,Weight: 650 gms ,Adjustable Armrest: Adjustable Handle : The armrest is made up of Thermo Polyurethane with 40 - 55 Shore Hardness and reinforced with 4 mm thick nylon insert. Arm pad size 235 mm (L) x 80 mm (W). The handle is fitted to the seat with seat/handle connecting strip assembly made of 35% Glass filled nylon 20 mm thick. Adjustable arm rest with height adjustment up to 70 mm. Minimum and Maximum height of armrest is 255 mm / 325 mm respectively. Arm Distance outside 640-650mm, Arm Distance inside 465-490mm .The front and back movement of armrest is 60 mm. Mechanism: single point control for seat and back adjustment, front pivot for tilt, tilt adjustment for back in 3position locking with antishock feature: Conventional mechanism with one lever control for lock and seat height adjustment. Mechanism made out of MS plate thickness is 3 mm and seat’s tilting angle is 3°-10° and back tilting angle is 87°-106°. Also, it has the back tension adjustment knob. The mechanism has a knob to adjust the back tilt tensionFollowing are the approved mechanism options to use with the chair. Gaslift: Gas lift pipe diameter is 50 mm and has a height adjustment stroke of 112 mm.Base:Pedestal made of nylon base fitted with 5 nos. twin wheel castors (castor wheel dia. 60mm), base pedestal dia 60-70 mm and pitch center dia. 660-680mm with castors, twin wheel castors injection moulded in Nylon etc. Nylon Base: The base is injection moulded in black 35% glass filled nylon and fitted with 5nos. The base is tested for static load of 1200 kg. Castors:.60 mm: The twin wheel castors are injection moulded in nylon 35% Glass Filled and diameter of castor is 60 mm. |
| 124 | Manufacturing, providing and Placing Medium height Storages of approve make(as per finally approved sample by department) of following dimensions with the following specifications.Providing &Placing of Medium Height metal storage with wooden shutter& top. 750mm W x 450mm D x 1200mm H Storagebodyandshelfshallbemade of 0.8mmCRCAsteelsheet,Shelvesand doors should have stiffenersforbetter strength and load bearing capacity. Auto engineer in charge)Hinges for better adjustment of doors. Chrome plated threeway Recess type spring loaded rectangular snapshuthandlecumlock withduplicatekeys.Stoarageunitshall be madeof100%virginEpoxy Powder Coated CRCA steel confirming to IS : 513 CR2(ColdReduced Carbon Steel Sheets & Strips(Part 1),2016, procuredfrom primery manufacturers like TATA Steel, SAIL RINL, Jindal etc. (Manufacturer Test Certificate tobe produced). Furthermore,Complete material shall passthrough 7 stage, NANO- TECHNOLOGY based Pre-treatment plant prior to powder coatingto make corrosive resistant. Powder coating should be done on FullyAutomatic Powder Coating Plant to ensuresmooth, uniform and highest quality levels of Powder Coating.Each Compartment\"s shelfshouldhaveuniformlydistributed load capacity of >35 kg. Front of Medium heightStoragesshould be made out of 16 mm thick E-1 grade particle board, melamine finish with 2mm PVC edge- bandingfittedwithextrudedaluminum handle as per requirement. Storages shouldbe provided with adjustable levelersDoor Lockshouldbeofthree- way lock mechanism. Door should be provided with Hinge-damping mechanism to enable softclosing of doors. Product should be BIFMA gold rated SCS global certified for inhouse air quality and with 05 years warranty. |
| 125 | Manufacturing, providing and placing in position machine made factory assembled Sofas for lobby & waiting Areaof approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing & Placing sofa with following specification ,Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti-termite paint of approved brand & manufacture to ensure stability of the frame, On the wooden base frame of the sofa to be provided with M.S. helical spring, 1 side & 2 back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing fina finished with fabric (Titch). Seat - 40-45-32Kg/cum density PU Foam, 100mm thick, Back - 35-40Kg/cum density PU foam, 60mm thick, Sides (inside) - 40-45 Kg/cum density PU Foam, 45 mm thick Sides (outside) & back (back side) - 35-40 Kgcum density PU foam, 25mm thick. Seat shall rest on SS frame supported on legs made of SS chrome plated section of cone shape of height 225mm. All SS work should be in grade 304. Base of sofa should be made of 225mm H SS chrome platedbase so as to give proper support to the seat. Height of the base of sofa shall be 200-250mm(approx). Finished width of arm shall be 100mm after upholstery work. Sofa to be fully upholstered using approved fabric (titch) of A grade of desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. The sofa shall be provided with adjuster made uup of injection plastic in black color. The sofa can should be configured in different form as per the client requirement. Complete as directed by the Engineer in charge2 seater sofa overall dimension - 1460mm W x820-860mm D x 780-820mm H, |
| 126 | Manufacturing, providing and placing in position machine made factory assembled Sofas for lobby & waiting Areaof approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing & Placing sofa with following specification ,Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti-termite paint of approved brand & manufacture to ensure stability of the frame, On the wooden base frame of the sofa to be provided with M.S. helical spring, 1 side & 2 back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing fina finished with fabric (Titch). Seat - 40-45-32Kg/cum density PU Foam, 100mm thick, Back - 35-40Kg/cum density PU foam, 60mm thick, Sides (inside) - 40-45 Kg/cum density PU Foam, 45 mm thick Sides (outside) & back (back side) - 35-40 Kgcum density PU foam, 25mm thick. Seat shall rest on SS frame supported on legs made of SS chrome plated section of cone shape of height 225mm. All SS work should be in grade 304. Base of sofa should be made of 225mm H SS chrome platedbase so as to give proper support to the seat. Height of the base of sofa shall be 200-250mm(approx). Finished width of arm shall be 100mm after upholstery work. Sofa to be fully upholstered using approved fabric (titch) of A grade of desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. The sofa shall be provided with adjuster made uup of injection plastic in black color. The sofa can should be configured in different form as per the client requirement. Complete as directed by the Engineer in charge1 seater sofa overall dimension - 820mm W x820-860mm D x 780-820mm H, |
| 127 | Manufacturing, providing and placing in position machine made factory assembled Sofas for Other Cabins of approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing & Placing of sofa with following specification ,Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti-termited treated of approved brand & manufacture to ensure stability of the frame, on the wooden base frame of the sofa to be provided with M.S. helical spring, 1 side & 2 back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing fina finished with fabric (Stitch). Seat - 40-45 Premium / -30-32kg HR cum density PU Foam, 100mm thick, Back - 28-32Kg/cum density PU foam, 38mm thick, Sides (inside) - 60 Kg/cum density PU Foam, 25 mm thick Arm Sides (outside) & back (back side) - 28-32 Kgcum density PU foam 11mm thick Seat shall rest on MS frame supported on legs made of Powder Coated section of L shape of height 200-240mm . Base of sofa should give proper support to the seat.Ms Powder coated frame of section 50x 30mm.Height of the base of sofa shall be 200-240mm(approx). Finished width of arm shall be 145-170mm after upholstery work. Sofa to be fully upholstered using approved fabric (stitch) of A grade of desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. The sofa shall be provided with adjuster made up of injection plastic in black color. The sofa can should be configured in different form as per the client requirement. Complete as directed by the Engineer in charge. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.3 seater sofa overall dimension - 1950mm W x 760-780mm D x 680-700mm H |
| 128 | Manufacturing, providing and placing in position machine made factory assembled Sofas for Other Cabins of approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing & Placing of sofa with following specification ,Wooden structure of sofa to be fabricated using good quiality hardwood duly seasoned and applying anti-termited treated of approved brand & manufacture to ensure stability of the frame, on the wooden base frame of the sofa to be provided with M.S. helical spring, 1 side & 2 back with jute strips, with polyfill covered with jute & finished with thick marking cloth before doing fina finished with fabric (Stitch). Seat - 40-45 Premium / -30-32kg HR cum density PU Foam, 100mm thick, Back - 28-32Kg/cum density PU foam, 38mm thick, Sides (inside) - 60 Kg/cum density PU Foam, 25 mm thick Arm Sides (outside) & back (back side) - 28-32 Kgcum density PU foam 11mm thick Seat shall rest on MS frame supported on legs made of Powder Coated section of L shape of height 200-240mm . Base of sofa should give proper support to the seat.Ms Powder coated frame of section 50x 30mm.Height of the base of sofa shall be 200-240mm(approx). Finished width of arm shall be 145-170mm after upholstery work. Sofa to be fully upholstered using approved fabric (stitch) of A grade of desired shade duly embossed including providing & fixing of all other related materials including hardwares etc. The sofa shall be provided with adjuster made up of injection plastic in black color. The sofa can should be configured in different form as per the client requirement. Complete as directed by the Engineer in charge. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty.1 seater sofa overall dimension - 850mm W x 760-780mm D x 680-700mm H |
| 129 | Manufacturing, providing and Placing Center & Corner table ofapprove make (as per finally approved sample by department) of following dimensions with the following specifications. Providing and fixing tables of Centre table Size - 900mm W x 600mm D x 365mm H for whose top & Baseare made ofparticle board wood Grade E-1(Environmental Friendly), thickness 19mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde emissions ( |
| 130 | Manufacturing, providing and Placing Center & Corner table ofapprove make (as per finally approved sample by department) of following dimensions with the following specifications.Providing and fixing tables of Side table Size - 500mm W x 500mm D x 365mm H for whose top & Baseare made ofparticle board wood Grade E-1(Environmental Friendly), thickness 19mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde emissions ( |
| 131 | Manufacturing, providing and Placing High table offollowing dimensions with the following specifications. Providing and fixing tables of High table Counter,High Café Table of size: 2400Wx 600Dx 1000Hmm High Table top is made of Particle board wood Grade E-1(Environmental Friendly), thickness 25mm cover with Melamine, Edge banding (PVC) 2mm.E1 grade laminate with zero urea formaldehyde emissions ( |
| 132 | Manufacturing, providing and Placing High chair of following dimensions with the following specifications.Providing and fixing tables of High Chair, High chair of size: 480Wx 440Dx 990Hmm & seating Height is 760 mm. Seat & Understurcture are madeout of teak wood with melamine plish.Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty. |
| 133 | Manufacturing, providing and placing in position machine made factory assembled Metal Almirah (as per finally approved sample by department) of following dimensions with the following specifications.Supplying and fixing in position Knock Down Steel Almirah – Overall Size - 910W x 480D x 1980H mm Having 4 shelves making 5 compartments, Whole body, doors and shelf made of 0.8mm CRCA sheet, Shelves and doors should have stiffener for better strength and load bearing capacity. Auto closing CED Coated “HETTICH”/ “HAEFFLE” / equivalent Hinges for better adjustment of doors. Chrome plated three way Recess type spring loaded rectangular snap shut handle cum lock with duplicate keys Highly durable – Made of 100% virgin Epoxy Powder Coated CRCA confirming to IS : 513 CR2 (Cold Reduced Carbon Steel Sheets & Strips (Part 1), 2016, procured from TATA Steel (Test Certificate available on request). Furthermore, Complete material passes through 7 stage, ultra-modern NANO-TECHNOLOGY based Pre-treatment plant prior to powder coating, making it highly corrosive resistant.Modern Technology - Rigid Know Down Construction done out of complete 0.8 mm thick CRCA sheet. Each Compartment Shelf has uniformly distributed load capacity per shelf is 35 kg. The rigid construction gives extra strength and durability, whereas the epoxy-polyester adds the finishing touch to the unit. Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 05 years warranty. |
| 134 | Manufacturing, providing and placing in position machine made factory assembled Reception Desk (as per finally approved sample by Chief Architect (PRND)) of following specifications:Providing & Placing Reception Desk with following details and specifications : L ShapeShape Reception Counter of size: 1800W1 x 100W2 x 750/450D x 1050/740Hmm Top & Legs are made up of 36mm thick E1 grade laminate with 2mm thk PVC Edge banding and Melamine finish. Front hanging panel is madeout of 18mm thick Decorative E1 Grade board. The product should be from approved make, Complete as per specification mentioned above & image under the guidance and aprroval of project architect/consultant & engineer in charge. Drawer Unit : 3 drawer Melamine (Box+Box+File) pedestal of overall dimensions internal and external dimensions 420 mm (W) x 450 mm (D) x 600 mm ( H). Drawer body should be made of E1 grade laminate. The exposed edge of worktop shall be secured with 2mm thick PVC edge banding tape of approved colour.E1 Grade laminate to be used which provide no urea formaldehyde emission and formaldehyde should be phenol base with emission of not more than ( |
| 135 | Manufacturing, providing and placing in position machine made factory assembled Student Bench of approve make (as per finally approved sample by department) of following dimensions with the following specifications.Providing & Placing Student Bench & Chair with following details and specifications : 1 Seater Table Size & Chair : 600mm W x450mm D x 750mm HWorktop is made of 25mm thick& Modesty & shelf are made of 18mm thick E-1 grade particle board with Melamine finish and the exposed edge of worktop secured with 2mm thick PVC edge banding tape of approved colour. The height of Worktop shall be 740-760 mm from ground level. The particle board should beE-1 Gradewith pvc edge banding in a curved profile as per site dimensions.Framework: The table to be provided with powder coated rectangular frame cantilever type & made of 25mm X 50mm x .2 mm thickness with grouting post for fixing. Epoxy powder coated spray paint, baked at temperature 200 C° coated of 70-80 micron thickness. Powder coating should be scratch resistance (cross hatch test 6x6 grid method).fitted with 6mmthick MS plate platewith grounting 100mm fastner. The table & chair should be finished / completed as per above mentioned specifications including providing and fixing of other related materials including hardwares, etc, with suitable levellers, complete or as directed by the Engineer-in- Charge.Chair : Seat and Backrest should be made with cutting and moulded foam covered by acrylic fabric.The shell should made up of plywood cover of termite, fire resistant plywood. Seat should be with buffering mechanism to enable soft closing of seat when it is folded and all hole on seat shelf should be noise absorbing.Legs of chairs should be made with cold rolled cold annealed steel duly powder coated with 70-80 micron thickness to provide smooth and clean surface.Seat should be foldable to enable comfortable seating, maintenance and to provide space utilization to walk around. Seat and Back should be wrapped with Titch make O-Farbic of desire colour as per Engineer-Incharge with zero formaldehyde glue. This should comply with (EN 120-1892).Product should be BIFMA gold rated SCSglobal certified for inhouse air quality and with 5 years warranty. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
