|
| 1 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 2 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 3 | Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 9mm thick. |
| 4 | Providing and fixing with 4 mm thick teak ply in the door shutter panel including fixing of beadingh with nails / screws as required in all respect as per architectual drawing / design ) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 5 | Providing and fixing magnetic Catchers ISI marked with necessary screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 6 | Providing and fixing SS handles with screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 120mm |
| 7 | Providing and fixing Mortice locks with size layers including necessary screws etc complete ( Indian make of approved quality including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge |
| 8 | Providing and fixing PVC TUKER tap section including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 9 | Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a)1st class deodar wood |
| 10 | Polishing two coats with P.U. polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 11 | Applying sealar on wood and wood based surfaces to given an even surfaces including cleaning the surfaces of all dirt,dust and sand papering so as to produce a smooth dry and matt surface including stopping & knotting including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 12 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood. |
| 13 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick 2nd class deodar wood |
| 14 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 100x10mm |
| 15 | ( ii)75x10mm |
| 16 | Providing and fixing Brass sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 250x16mm |
| 17 | Providing and fixing 150 mm bright finished floor aluminium door stopper with rubber cushion necessary brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 18 | Providing and fixing bright finished aluminium hard drawn hooks and eyes ( i) 150 mm including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 19 | Providing and fixing 1.50mm(One point Fifty milimetre) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 20 | Marble work (table rubbed and polished for walls lining) Veneer work 2.50cm. thick in cement mortar 1:3 (1 cement:3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade including carriage of materials in all leads as per directions of the Engineer-in-Charge. (i) Baroda Green Marble |
| 21 | Extra for making double moulded nosing terazzo including returned moulded ends and angles to mouldings including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 22 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)For thickness of tiles 10 mm to 25 mm |
| 23 | Tile work in skirting, risers of steps and dado up to 2 m (two metre) height over 12 mm(twelve milimetre) thick bed of cement mortar 1:3 (One cement :three coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i)1. 8 mm( One point eight milimetre) thick 1200x 600 mm thick |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (a) Concealed work, including cutting chases and making good the walls etc. (i) 15 mm nominal dia pipes |
| 25 | Providing and fixing Chromium plated brass curtain rods having of wall thickness of 1.25 mm with two chromium plated of 25mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs etc where ever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.25mm dia |
| 26 | Providing and fixing Chromium plated brass bracket wall to wall thicknessof 1.25 mm with two chromium plated of 25mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs etc where ever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.25mm dia |
| 27 | Providing and fixing Chromium platedbrass final for curtain rod having thickness of 1.25 mm with two chromium plated of 25mm thick chromium plated brass plate with two chromium plated brass brackets fixed with C.P brass screws and wooden plugs etc where ever required including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.25mm dia |
| 28 | Providing and fixing one hole basin mixing Faucet Make ESS ESS including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge |
| 29 | Providing and fixing wash basin with with Pedestal including single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials in all leads as per directions of the Engineer-in-Charge. (a) Flat back (i)550 x400mm MAKE ESS ESS |
| 30 | Providing and fixing 32 mm dia CP brass waste for wash basin or sink complete with in all leads of materials and other incidentals . |
| 31 | Providing and fixing one piece water closet ovel shaped white including carriage of materials in all leads as per directions of the Engineer-in-Charge. Make ESS ESS |
| 32 | Providing and fixing PTMT Health for Set spray of approved quality and colour with 1.5 mtr Tube including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 33 | Providing and fixing 100 mm sand cast Iron grating for gully trap including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 34 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 35 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 36 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 37 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws:- including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make Seiko or equivalent |
| 38 | Providing and fixing unplasticised P.V.C pipe clips of approved design to uplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (One cement : Four coarse sand) and making good the wall etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)110mm dia. |
| 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Flexible pipe (a) 32 mm dia |
| 40 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 41 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm nominal bore MAKE ESS ESS |
| 42 | Providing and fixing tepephonic wall mixture including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 43 | Providing and fixing corner including carriage of materilas in all leads and lifts as per directions of the Engineer-in-Charge. |
| 44 | Providing and fixing long body C.P brass bib cock C.P of approved quality conforming to IS :8931 (i) 15 mm norminal bore MAKE ESS ESS |
| 45 | Providing and fixing toilet paper holder of approved quality and Stainless steel screws and rawal plugs etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Make Jaquar. 15 mm norminal bore MAKE ESS ESS. |
| 46 | Providing and fixing tumbler approved quality conforming to IS: 8931 (i) 15 mm norminal bore MAKE ESS ESS |
| 47 | Providing and fixing Telescopic channel for basket etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 48 | (i) 10\"\" |
| 49 | (ii) 22\"\" |
| 50 | Providing and fixing following kitchen accessories including carriage of materials Make ESS ESS |
| 51 | (i) Bucket |
| 52 | (ii) Cutlery |
| 53 | Providing and fixing stainless steel \"DIAMOND\" kitchen sink duplex type (double drawl) with drain board of diamond or equivalent including C.I or M.S brackets painted white including cutting holes in wall and making good the same including carriage of materials up to all leads and lifts. |
| 54 | (i) 850 mm x450 mm 150 mm (Diamond & Equelant) |
| 55 | Applying priming coat over new wood and wood based surfaces after and i/c preparing the surface by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting including carriage of material in all leads and lifts as per direction of the Engineer-in-charge.(a)Ready mixed paint brushing wood primer pink. |
| 56 | Painting two coats (excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) With white enamel paint. |
| 57 | Wall painting (One coat) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 58 | Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 59 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 60 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) One or more coats on old work |
| 61 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty (i) Float glass panes of nominal thickness 4 mm including carriage of materials in all leads as per directions of the Engineer-in-Charge. (weight not less than 10kg/sqm) |
| 62 | Frosted glass 4 mm thick |
| 63 | Providing and fixing HDMR Board including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 18 mm thick. |
| 64 | Disposal of excavated earth work by debris material upto site on approved dumping siteapproved by M.C. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
