|
| 1 | Civil Works |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction withframe of 1st class hard wood and well matched teak 3 ply veneeringwith vertical grains or cross bands and face veneers on both faces ofshutters 30 mm thick including ISI marked Stainless Steel butt hingeswith necessary screws |
| 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters Kiln seasoned selected class of sheesham wood |
| 5 | Providing and fixing factory made panel PVC door shutter consisting offrame made out of M.S. tubes of 19 gauge thickness and size of 19 mmx 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frameshall have a coat of steel primers of approved make and manufacture.M.S. frame covered with 5 mm thick heat moulded PVC \"C\" channel ofsize 30 mm thickness, 70 mm width out of which 50 mm shall be flatand 20 mm shall be tapered in 45 degree angle on both side formingstyles and 5 mm thick, 95 mm wide PVC sheet out of which 75mmshall be flat and 20 mm shall be tapered in 45 degree on the inner sideto form top and bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lockrail. Top, bottom and lock rails shall be provided both side of the panel.10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided asgap insert for top rail & bottom rail, paneling of 5 mm thick both sidePVC sheet to be fitted in the M.S. frame welded/ sealed to the styles &rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beadingon inner side, and joined together with solvent cement adhesive. Anadditional 5 mm thick PVC strip of 20 mm width is to be stuck on theinterior side of the \"C\" Channel using PVC solvent adhesive etc. completeas per direction of Engineer-in-charge, manufacturer\"s specification &drawing.30 mm thick plain PVC door shutters |
| 6 | Providing and laying ceramic glazed floor tiles of size 300 x 300 mm (thickness to be specified by the manfacturer) of 1st quality conforming to IS:15622of approved make in colours such as white, Ivory,Grey, Fume Red Brownlaid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand )jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigement etc complete. |
| 7 | Providing and fixing plain multipurpose cement board(Hight pressure steamcured)withsuitablescrewsforcementparticleboardin ceiling etc. complete (frame work to be paid seperatately).6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862:2000 |
| 8 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A,including jointing with seal ring conforming to IS : 5382, leaving 10mm gap for thermal expansion (i) Single socketed pipes.110 mm diameter |
| 9 | Providing and applying white cement based putty of average thickness 1 mm of approved brandand manufacturer. Over the plastered wall surface to prepare the surface even and smooth complete |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 gram / litre of approved brand and manufacturer inclduing applying additional coats wherever required to achieveeven shade and colour Old work (one or more coats) |
| 11 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapling sand papering and preparing the surface smooth including necessary repairs to scratches etc complete. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work |
| 13 | Finishing walls wih Acrylic smooth exterior paint of required shade: Old work ( Two or more coat applied @1.67 ltr / 10 sqm on existing cement paint surface Old work ( Two or more coat applied @ 1.67 ltr / 10 sqm) on existing cement paint surface. |
| 14 | Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground all complete as per directions of Engineer - in - Charge.With cement mortar 1 : 4 |
| 15 | Renewing glass panes,with putty and nails wherever necessary including racking out the old putty, Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 16 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead For thickness of tiles 10 mm to 25 mm For thickness of tiles 10 mm to 25 mm |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT Pillar cock, 32 mm PTMT waste couplingof standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm PTMT Pillar cock |
| 18 | Providing and fixing white vitreous china water closet squatting pan Orissa pattern W.C.Pan of size 580 x 440 mm |
| 19 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 20 | Providing and fixing P.V.C.Waste pipe for sink or wash basin includingP.V.C. Waste fitting complete. Semi rigid pipe 32 mm |
| 21 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backingrectangular shape 453 x 357 mm |
| 22 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 23 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.15 mm dia nominal bore |
| 24 | 20 mm dia nominal bore |
| 25 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete15 mm nominal bore |
| 26 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 27 | Add cost index @ 18 % on Civil items |
| 28 | Rewiring for light point/ fan point/ exhaust fan point/ call bell pointwith1.5sq.mmFRLSPVCinsulatedcopperconductor singlecorecableand1.5sq.mmFRLSPVCinsulatedcopper conductorsinglecorecable asearthwirein existingsurface/ recessed steel/PVC conduit including dismantling as required..Group B |
| 29 | Supplyinganddrawing followingsizesofFRLSPVCinsulated copperconductor,singlecorecableintheexistingsurface/ recessed steel/ PVC conduit as required.1 x 1.5 sq. mm |
| 30 | Supplyinganddrawing followingsizesofFRLSPVCinsulated copperconductor,singlecorecableintheexistingsurface/ recessed steel/ PVC conduit as required.2x 2.5 sq. mm |
| 31 | Supplyingandfixingfollowingpiano typeswitch/socketonthe existing switch box / coverincluding connectionsetc. as required 5/6 A switch |
| 32 | 2 way 5/6 A switch |
| 33 | 3 pin 5/6 A socket outlet |
| 34 | 15/16 A switch |
| 35 | 6 pin 15/16 A socket outlet |
| 36 | Bell push |
| 37 | Supplying and fixing two module stepped type electronic fan regulator on the existingmodular plate switch box including connections but excluding modular plate etc as required |
| 38 | Supplying and fixing brass battern / angle holder including connection etc as required |
| 39 | Laying of one number PVC insulated and PVC Sheathed / XLPE Power cable of 1.1 KV grade of following size direct in ground including excavation,sand cushioning, protective covering and refilling the trench etc as required Above 35 Sqmm and upto 95 sqmm |
| 40 | Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointingmaterials for following size of PVCinsulatedandPVCsheathed/XLPEaluminiumconductor cable of 1.1 KV grade as required.3 1/2 X 50 sq. mm |
