|
| 1 | Propviding apron around Chatries: Providing and laying plain cement concrete mixing with 20 mm size stone metal aggregate in 1:3:6 proportion for flooring base of pathway including compacting, curing etc, complete as directed |
| 2 | Propviding apron around Chatries: : Providing dressed stone flooring of size43 Cm x 28 Cm. and thickness more than 12 to 15cm obtained from approved quarry in two line dressing the exposed surface including cutting fixing in proper position with slope by using in C.M. 1:3, including curing all lead and lift etc. complete . |
| 3 | Providing recess pointing on stone apron flooring using cement mortar 1:3 mix, including racking out joints, curing etc. complete as directed by in charge of work |
| 4 | Dismantling/Removing the modern damaged RCC coping over platform surrounding the temple carefully and throwing the stuff 50 mtr. away from the monument |
| 5 | Providing dressed stone copping with moulded designs and carvings of size 0.45 x 0.22m and of length 0.55 0.70m where ever RCC Coping was provided earlier which was also damaged, using fine dressed stone as per existing pattern, fixing and design carving and fixing with lime surkhi mortar 1:1:1 morter, including curing all lead and lift etc. complete |
| 6 | Providing dressed kerb stone around well where ever missing with stones of length 0.30-0.60m of size 0.17x0.28m with fine dressed stone as per existing pattern, shed and design, carving and fixing with Lime mortar 1:1:1 including curing all lead and lift etc. complete |
| 7 | Providing dressed border stones of Home kund where ever damaged with stone of sizes 0.55x0.10x0.20 mtr., with fine dressing as per existing pattern, shed and design carving and fixing with cement morte 1:3, including curing all lead and lift etc. complete . |
| 8 | Excavataion and levelling of uneven earth soil around the both chatries to expose the adhishtana of samadhi properly carefully without damaging any structure and throwing the removed soil stuff 50 Mtr. Away from the monument as directed. |
| 9 | Removal of old existing damages steps for South side Chatri carefully including throwing the debris away from site. |
| 10 | Providing proper steps for South and North side of Chatri by using three line dressed C.R. stone of size 0.45 X 0.30 X 0.20 fixed with Cement mortar 1:3 mix including curing etc. complete. |
| 11 | Providing and Applying melamine polish after making surface profile using sand papering the finished best teakwood over regular white polish by using lakh, mom, melamine, rawsena, chandras etc. in 2 or more coats etc complete as directed. |
| 12 | Providing Boundary wall: Earthwork Excavation for foundation in hard soil including disposing the excavated material up to a distance of 50 mtr away from the monument etc Complete. |
| 13 | Providing Boundary wall: Providing and laying plain cement concrete for foundation of UCR dwarf wall and coping over UCR dwarf wall in 1:2:4 proportion using 20mm hard stone metal, including mixing, laying the concrete, compacting, curing etc. complete as directed by in charge of work |
| 14 | Providing Boundary wall: Providing and Constructing UCR stone masonry wall in Cement morter 1:5 using hard trap stones obtained from approved quarry, including racking out joints, curring etc complete |
| 15 | Providing Boundary wall: Providing recess pointing on stone masonry of exposed portion using cement mortar 1:3 mix, including racking out joints, curing etc. complete as directed by in charge of work |
| 16 | Providing 12 mm thick plastered in C. M. 1:3 to the concrete coping of dwarf wall including finishing, curing etc. complete as directed by in charge of work |
| 17 | Providing & fabricating M.S. spiked grill of size 2.50m width by using 24 Nos. 100mm C/c of 16mm square bars of 0.80m height welded with M.S. ISA 50×50×6mm angle iron at two sides of vertical and bottom, 2 Nos. .M.S. Channel 100x50x6mm as vertical post and jointing/welding, each M.S. Channel as shown in the drawing including cutting welding grinding diamond cut for fixing square bars for inserting in to 2 Nos. of M.S. flat of size 50 x 6mm at top & middle with necessary fixing arrangement at both sides of grill, painting in two coats over and anticorrosive paint etc. complete as directed by in charge of work.[RMT] |
| 18 | Fixing readymade M.S. iron spiked grill gate using 50 x50x 6mm MS angle for frame welded with 50x6mm MS flat horizontally, inserting the 16 mm Squre bar, fixed with 100x100x7mm thick channel bo in proper alignment & level with proper fixtures etc. complete as directed by in charge of work |
| 19 | Providing and fixing M.S. weld mesh frame over open well. Covering by 3 Nos. vertival ISMB Pole of size 200x100x5.7 mm in equql distance supported with the frame of 50x50x5 mm thick MS. Angle equqly 9 Nos. frame and fixing the weldmesh 25x50mm in to the frame of angle with top covering by MS Flat of size 25 x 5 mm fixing with nut and bolts. Including cutting all MS materials, welding, finishig, grinding etc complee as shown in the drawing. [Opening size 7.80 X7,80 Mtr.] |
| 20 | Repairing of wooden members of Nagarkhana i.e. Damaged, wooden Pillar, Base, Beem, Arch, Reling etc as per existing pattern of Nagarkhana where ever damaged by using best quality teakwood including making gruv, and texture as per original complete |
| 21 | Providing and fixing best quality teak wood door frame of section 75x60mm with cutting, finishing, fastening and fixing the frame by nut bolt etc. Complete. |
| 22 | Providing and fixing Aluminum 1 mm thick Chequered sheet with 20 mm self threaded screw over old ramp of Ghrushneshwar temple including removing old wooden planks, cutting and fixing the sheet properly etc. complete |
| 23 | Providing and fixing best quality teak wooden upper grooved ramp plate including making grove to the wooden plank, fixing over wooden Rafter with nails, fevicol, Nut bolt etc. Complete |
| 24 | Providing, fabricating and fixing M.S.spiked grill for closing the openings ofChatri of size 2.10 m width by using20 Nos. 100mm C/c of 20 mm squarebars of 3.00m height on Middle (Average height 2.40 mtr.)as percurvature height welded with M.S. ISA50×50×6mmangle iron at two sides ofverticaland bottom as shown in thedrawing including cutting welding grinding diamond cut for fixing squarebars for inserting in to 4 Nos. of M.S.flat of size 50 x 6mm at equaldistance with necessary fixingarrangement at both sides of grill,painting in two coats over and anticorrosive paint etc. complete as directed by in charge of work. [EACH] |
| 25 | Providing, fabricating and fixing M.S.spiked grill gate for closing the openings of Chatri of size 2.10 m width by using 18 Nos. 100mm C/c of20 mm square bars of 3.00m heighton Middle ( Average height 2.40mtr.)as per curvature height weldedwith M.S. ISA 50×50×6mm angle ironat two sides of vertical and bottom asshown in the drawing including cuttingwelding grinding diamond cut forfixing square bars for inserting in to 4 Nos. of M.S. flat of size 50 x 6mm atequal distance with necessary fixingarrangement at both sides of grill,painting in two coats over and anticorrosive paint , including necessary locking arrangement etc. complete as directed by in charge ofwork. [EACH] |
| 26 | Providing 20mm thick plastered in C. M. 1:3 to the Bottom and top roof of the Nagarkhana after removal of old loose and damaged plaster carefully including finishing, curing etc. complete as directed by in charge of work |
| 27 | Providing lime surkhi pointing added with natural admixtures with matching stone poweders pointing over the inside the southern Chatri flooring including transportation of material, curing etc, complete as directed. |
