|
| 1 | Renovation of Saidapet Poly Clinic (Old Building) Chennai |
| 2 | Clean removals of Cement plaster from walls as directed by the departmental officers. |
| 3 | Dismantling, removing and carefully stacking press tiles with weathering course etc, complete as directed by the departmental officers |
| 4 | Dismantling the damaged floor finish and dadooing walls in cement mortar with mosaic tiles / Glazed tiles/ cuddapah slab and clearing away with carefully stacking the material useful for reuse for any thickness etc., complete complying with standard specification and as directed by the Departmental Officer. |
| 5 | Dismantling the damaged Doors and windows including removal of frames, Hinges, fastenings and fixing the same including necessary alterations etc., complete complying with standard specification and as directed by the Departmental officers |
| 6 | Earth work open excavation in all soils and sub soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring, shuttering, bailing out water wherever necessary and depositiong the excavated earthe with a lead of 10m within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification |
| 7 | Supplying and filling in foundation and basement with M - Sand in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification. |
| 8 | Supplying and filling of Well gravel for basement in layers of not more than 15cm thick well watered, rammed and consolidated etc., complete as per standard specification. |
| 9 | Plain Cement concrete 1:5:10 (One cement five M sand and ten broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 40mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete |
| 10 | Plain Cement concrete 1:2:4 (One cement Two M sand and four broken Machine crushed stone jelly) using HBG Machine crushed stone jelly of size 10-12 mm gauge for founding and basement including de- watering if found necessary and laid in layers of not more than 15cms thick etc., complete complying with standard specification and as directed by the departmental officers. |
| 11 | Brick work in following Cement Mortar using best quality of Second class ground moulded chamber burnt bricks 9\"x4-3/8\"x2-3/4\" for foundation and basement including curing etc, complete complying with standard specification. (For Foundation and Basement |
| 12 | Brick work in following Cement Mortar using best quality of Second class ground moulded chamber burnt bricks 9\"x4-3/8\"x2-3/4\" for foundation and basement including curing etc, complete complying with standard specification. (In Ground floor |
| 13 | Plastering the walls with Cement Mortar 1:5 - 12 mm thick using the M sand including curing and finishing neatly complying with standard specification and as directed by the departmental officers etc. complete. |
| 14 | Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case steps, landing slabs etc with CM 1:3 (One cement and three M sand) 10mm thick including hacking the surfaces and providing necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the Departmental Officer. |
| 15 | Providing Granolithic floor finish 25mm thick with PCC 1:2:4 (One cement two sand and four aggregate) using 10 to 12mm thick HGB jelly and river sand and including rubbing the top surface smoothly thread lining if found necessary and curing etc., complete complying with standard specification and as directed by the Departmental officer. For 20 mm thick for residence and other places where norms prevails |
| 16 | Paving the flooring with plain ceramic tiles of approved quality, colour and design joint free of size 305x305x6 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. The colour & quality of tiles should be got approved by the Executive Engineer before use on work.Plain ceramic tiles of size 305 x305 x6 mm |
| 17 | Weathering course-using Concrete broken brick jelly 20 mm gauge in pure slacked lime (No sand to be used) over RCC roof slab. The proportion of broken brick jelly to slaked lime being 32:12½ cft well beaten by wooden beaters for giving required slope and thickness required etc complete complying with standard specifications and as directed by Departmental Officers. For Ground Floor |
| 18 | Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm of approved quality laid in CM 1:3 (one cement and three sand) mixed with 2% of water proofing compound by weight of cement used and pointed with the same oiled mortar including mixing of red oxide etc complete complying with standard specifications and as directed by Departmental Officers.Pressed tiles 23cm x 23cm x 20mm |
| 19 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer For one coat -10 m2 |
| 20 | Supply and fixing PVC rain water down fall pipes of 110 mm dia size 4 Kg/cm2 with necessary shoes, specials, clamps, bends, cowl, screws, nails, teakwood block, etc., complete complying with standard specification and as directed by the Departmental officers. |
| 21 | Supplying and fixing of rolling shutters with ISI mark shall be of pull and push type made out of 18/Gauge x3’’ lathe sections which consists of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below; Curtain; Shall be of 18/Gx3\" lath sections cut to required size and filled with heavy cast iron/ M.S. Clips for 8\"0\"[2.45m] high rolling shutter lathe sections provided shall be not less than 37 numbers. Lock Plate; Shall be 10gaue M.S.Sheet reinforced with 40mmx 6mm M.S angles at the bottom and fitted with heavy latches of 12mm thick locking arrangements on either sides. There should be one handle on either side Guide channel; Pressed guide channels shall be of 10 gauge M.S.Sheet and attached to the side brackets with 20mm square bar. Side brackets shall be of 10 Gauge angle M.S.Plate and cost iron \"U\" clamps shall be reveted to the side brackets Roller; Shall be of heavy cast iron pullies fitted with heavy duty C\" Class 40mm steel pipes and high tensile high carbon coil springs-2 springs shall be supplied. Supplying and fixing of Hood Cover; Shall be of 0.9mm CRCA sheet reinforced with 25mm x 25mm x 3mm M.S. angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated with heavy coat of zinc chromite primer. The above specifications for various components of rolling shutter shall be invariably followed and verified with the rolling shutters supplied by the firms at site. If the rolling shutters supplied do not confirm to the above specifications, the concerned firms should be asked to replace the shutter or supply the missing components Rolling shutter (18 gauge) Gear Operated Type |
| 22 | Fabricating and supplying and erecting the main gate / Wicket Gate / grill with necessary bolts and nuts including with one coat of red oxide primer and zinc chromate etc., complete complying with standard specification and an directed by the departmental officers. |
| 23 | Fabrication,supply, delivery and fixing of outside M.S. Ladder of 45cm clear wide made out of 50mm x 50 mm x 6mm M.S. angle for sides and steps in 16mm MS plain rods fixed at 30 cm C/C welded jointed etc., providing with suitable side supports, clamps and locking arrangements provided with r one coat of redoxide paint, for providing access to roof top of OHT of suitable inclined length, including bottom anchorage and transportation and as directed by the departmental officers. |
| 24 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) WindowWindow: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimensional stablilty. The sash should be of 60x102mm. The mulilion should be of 60x74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lamInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 25 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimensional stablilty. The sash should be of 60x102mm. The mulilion should be of 60x74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass/6mm bison amInstallation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 26 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) VentilatorVentilator: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25x24x25mm steel reinforcement with a thickness of 1mm to have dimensional stablilty. The sash should be of 60x102mm. The mulilion should be of 60x74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass/6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 27 | Supplying and fixing Solid PVC door shutters using 19 guage 19mm M.S. square tubes for styles and outer PVC frames, 15mm M.S. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm.The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter solid panel PVC door with frame( Solid panel PVC door with frame ) |
| 28 | Supplying and fixing of PVC WATER TANK of best and approved quality with ISI specification and having inlet,outlet, overflow and clearing pipe arrangements and labour charges for fixing in position with all necessary accessories and transporting at site of work etc., complete complying as directed by the departmental officers. (1000 Litre) |
| 29 | Supplying, laying and joining UPVC pipes of approved quality and best variety conforming to ISS with ISI mark, of the following size External above ground level up to 4 M hight laid properly to alignment including cutting, threading and fixing the required UPVC specials but excluding the cost of such specials and fixing to the wall with necessary TW plugs, clamps and screws, making holes on the wall or drilling holes in the roof and making good dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete. (25 mm) |
| 30 | Supply and fixing in position best quality PVC Soil/ waste pipes of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete. - Below Ground Level (75 mm) |
| 31 | Supplying and fixing in position first quality and approved variety gun metal Gate valve (Heavy type)/ Wheel Valve (Heavy Duty) with ISI Mark of approved quality of the following dia including cost of shellac, thread, labour charges for cutting, threading, fixing in position etc., complete complying with standard specification and as directed by the Departmental Officer for both internal and external water supply arrangements. (Gate Valve-25 mm) |
| 32 | Supplying and fixing in position 15 mm dia Brass Chromium Plated Screw down tap (Heavy type) / Pillar tap / Stop Cock of approved make conforming to IS specification and quality including cost of shellac, thread, cutting and threading wherever necessary etc., complete complying with standard specification and as directed by the Departmental officers. (Taps should be got approved by the Executive Engineer before use on the works) Swan Neck Tap |
| 33 | Supplying and fixing in position mirror of size 600x450 mm / 500x400 and 5.5 mm thick of approved quality and brand of size with necessary plastic back, PVC frame with bottom stand of approved color with brass screws, rowel plugs etc., complete complying with standard specification and as directed by the Departmental officers. The quality of mirror should be got approved by the Executive Engineer before use on work. (600x450 mm) |
| 34 | Supplying and fixing CP/ Aluminium towel rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plug and CP screws etc., complete complying with standard specification and as directed by the Departmental officers. (CP Rail) |
| 35 | Supplying and fixing new one of best approved quality Porcelain soap tray of size 150 x 100 mm / Porcelain soap dish of size 150x150x 50mm including cost of rowel plug, brass screws etc., complete complying with standard specification and as directed by the Departmental officers. (Porcelain soap dish of size 150x150x 50mm -White) |
| 36 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550x400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated pillar tap, 32mm dia metre G. M. Wheel valve, 15mm dia brass nipple 15mm dia nylon connection etc. including fixing the wash hand basin in the wall in position with pair of CI brackets with teak wood plugs and screws and giving necessary water supply connection and painting the brackets with two coats of paint over a priming coat of anticorrosive paint including testing for leakage etc. complete complying with standard specification. The quality and colour of wash hand basin and specials should be got approved by the Executive Engineer before use on work.) Without Pedestal (White) |
| 37 | Supplying and fixing in position white glazed European water closet with P or S trap and double flapped seat cover, 10 litter capacity low level flushing tank including all internal fittings on CI brackets, 12mm brass nipple, chromium plated brown headed stop cock, 12mm nylon connection connecting with walls and floors including dismantling masonry and redoing the same to the original condition etc., complete complying with standard specification and as directed by the Departmental officers 10 Litres - White. |
| 38 | Supplying and fixing in position of the following UPVC specials of heavy type and approved quality and good variety excluding fixing charges complying with standard specification. Fixing charges included in the pipe laying work (The UPVC specials should be got approved by the Executive Engineer concerned before use on works).Elbow 25mm dia |
| 39 | Supplying and fixing in position of the following UPVC specials Tee 25mm dia |
| 40 | Supplying and fixing in position of the following UPVC specials Union 25mm dia |
| 41 | Supplying and fixing in position of the following UPVC specials Bend 25mm dia |
| 42 | Supplying and fixing in position of the following UPVC specials Coupler 25mm dia |
| 43 | Supplying and fixing in position of the following UPVC specials Reducer 25mm x20mm dia |
| 44 | Supplying and fixing in position of the following UPVC specials Reducer Elbow 25mm x20mm dia |
| 45 | Supplying and fixing in position of the following UPVC specials Reducer Tee 25mm x20mm dia |
| 46 | Supplying and fixing in position of the following UPVC specials Hex Nipple 25mm dia |
| 47 | Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour (SD 57) |
| 48 | Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour (SD 63) |
| 49 | Supply and fixng of TNEB Moter Board suitable for 3 Phases 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1 1/2\" x 1 1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 200A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete (SD 131) |
| 50 | Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug) (SD 144) |
| 51 | Supply and fixing of 6 way SP DB of 16 A / way with 16 A DP switch with metal clad of 500 V (Side Handle) with F & N on suitable TW Board with PWD Earth connection only (SD 150) |
| 52 | Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC armoured LTUG cable with earth connection. (SD-167) |
| 53 | Supply and clarnping of 3 1/2 x70 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps. (SD-208) |
| 54 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class \"B\" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD 221) |
| 55 | Supply and providing cable end termination of 3 1/2 x 70 sqmm PVC LTUG Aluminium armoured cable withnecessary aluminium cable sockets by crimping etc. with electrical connection comple) (SD - 226) |
| 56 | Renewal by Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection .(SD-372) |
| 57 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (SD-289) |
| 58 | Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in PVC rigid pipe on wall and ceiling with MS accessories with suitable Module GI switch box on wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Plug point ( 8 points / Coil) Higher End (DATA -A) |
| 59 | Wiring with 2 x2.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in PVC rigid pipe pipe concealed in wall and ceiling with MS accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A/6A 3 pin module socket with module front plate with painting of Suitable colour with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed MS conduit 15A Plug point ( 8 points / Coil) Higher End (DATA -B) |
| 60 | Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting (SD-443) |
| 61 | Supply and fixing of 1200mm (48\") A.C ceiling fan High speed (Higher End Havells / Crompton / Usha /Equivalent) complete with Fan step regulator 100w 2 module in suitable 1/2 module metal flush type box covered with 2 module white cover plate (Higher End Crabtree/ Legrand / Hager make) with 600mm down rod on the existing fan clamp.(DATA-C) |
| 62 | Supply and fixing of 48W LED street light fitting with LED (Higher end) with complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .(DATA - D) |
| 63 | Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD 527) |
| 64 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-584) |
| 65 | Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD-671) |
| 66 | Old Terrace Screed Repair with UV Resistant Hybrid PU Waterproof coating above 500 Sq.m - Providing and Applying high strength, hybrid polyurethane Waterproofing coating which is two component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof screed surface applied @ 1.6 L/m2 in 3 coats to achieve 1mm DFT, having tensile strength with 45 gsm glass fibre mesh 10N/mm2 , Elongation ≥ 200%, confirming to ASTM D2370; Abrasion resistance 15mg confirming to ASTM D 4060 and Crack bridging ability up to 3 mm, including surface preparation, ensure surface in SSD condition for first coat and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification. Please Enable Macros to View BoQ information |
