Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.D.S.R. Item No. 2.8.1 (Rate: 260.30x0.735x109/107)+1%=196.85 |
| 2 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials.All kinds of soilD.S.R. ITEM No. (2.8.1) +(2.26.1) |
| 3 | Disposal of surplus Earth upto 1 K.M. including Loading/unloading/stackingD.S.R. Item No. 1.1.2 |
| 4 | Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):Depth not exceeding 1.5 mD.S.R. Item No. 2.20.3 |
| 5 | Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):Depth exceeding 1.5 m but not exceeding 3 mD.S.R. Item No. 2.20.2 |
| 6 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.PWD SOR Item No. 255 |
| 7 | Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.8 ( Rate: 6812.00x0.735x109/107)+1%=5151.41 |
| 8 | C.C. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.3 ( Rate: 7878.50x0.735x109/107)+1%=5957.92 |
| 9 | Providing and fixing APP (Atactic Polypropylene Polymer) modifiedprefabricated five layer 2 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrance manufacture of density at 25°C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using Butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/ 5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacture of membrane.2mm (for corrugated roof sheets)D.S.R. 14.89.1 |
| 10 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M25 grade with minimum cement content of 350 kg /cum All works upto plinth level RCC as in fdns and footings of colums and plinth beam and bases of column. DSR Item No. 5.33.1.1 (Rate: 9504.75x0.735x109/107)+1%=7187.74 |
| 11 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum (level 1 to lvl-5) D.S.R. Item No. 5.33.2.1 ( Rate: 9860.40x0.735x109/107)+1%=7456.69 |
| 12 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominalsize derived from natural sources)..DSR Item No. 4.2.2 |
| 13 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1 ( Rate: 107.10x0.735x109/107)+1%=80.99 |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for footings/PB, rough finished surface of conc. D.S.R. Item No. 5.9.1 ( Rate: 392.15x0.735x109/107)+1%=296.55 |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for columns, pillers, piesr, abutment , post and strutsD.S.R. Item No. 5.9.6 ( Rate: 961.30x0.735x109/107)+1%=726.96) |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantileversD.S.R. Item No. 5.9.5 ( Rate: 736.40x0.735x109/107)+1%=556.88) |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roof , landings, balconies, acessess platformD.S.R. Item No. 5.9.3 ( Rate: 927.25x0.735x109/107)+1%=701.21) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.dsr 5.9.2 |
| 19 | Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the workD.S.R. Item No. 6.2.1 (Rate: 6504.90x0.735x109/107)+1%=4919.17) |
| 20 | Brick work in SUPER STRUCTURE in 23 cm thk wall with 1:4 cement and coarse sand incl. all materials labour annd t&p etc. for proper completion of work.D.S.R. Item No. 6.4.1 ( Rate: 9344.35x0.735x109/107)+1%=7066.44) |
| 21 | Class 150 Brick work in 1:3 cement and Coarse Sand of 1.25 finentss modulusbut in Parapet including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cms.D.S.R. Item No. 6.13.1 (Rate: 1150.50x0.735x109/107)+1%=870.04) |
| 22 | 12 mm thk plaster (1:4) with cement & Coarse Sand (Fair Face)D.S.R. Item No. 13.4.1 (Rate: 357.35x0.735x109/107)+1%=270.24) |
| 23 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)D.S.R. 13.5.1 (Rate: 411.75x0.735x109/107)+1%=311.38) |
| 24 | Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 ( Rate: 156.05x0.735x109/107)+1%=118.01) |
| 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primerD.S.R. Item No. 13.41.1 |
| 26 | Finishing walls with Acrylic Smooth exterior paint of required shade :-New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.).D.S.R. Item No. 13.46.1 (Rate: 160.60x0.735x109/107)+1%=121.45) |
| 27 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel workD.S.R. Item No. 13.52.1 |
| 28 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm.D.S.R. Item No. 13.45.1 |
| 29 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: DSR ITEM NO. 8.32 (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 30 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :15 mm wide and 15 mm deep grooveD.S.R. 13.73.1 |
| 31 | Extra for washed grit plaster on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.D.S.R. 13.74. x2 |
| 32 | Extra for washed stone grit plaster on circular work not exceeding6 m in radius (in two coats).D.S.R. 13.75 |
| 33 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqmD.S.R. Item No. 13.48.1 |
| 34 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).D.S.R. Item No. 9.1.2 |
| 35 | Providing and fixing factory made PVC door shutter made of solid foam PVC profiles of thikness 5 mm and 15 mm at edges integrally extruded for vertical style and horizontal (top/ bottom/ lock) rails of minimum crosssection of 7Ommx 28mm, of shape and design as per manufacturer’s specifications having homogenous fine cellular structure and smooth integral outer skin, inserted with G.I. ‘C’ section/ rectangular tube profileof minimum 0.30 mm thickness with 120 gsm coating as stiffeners as per manufacturer’s specifications Mitred cut joints for styles and rails provided with telescopic polymeric ‘L’ corners are jointed together using solventadhesive and strenghtened with fully threaded stainless steel screws (of required size) through reinforced stiffener with paneling of specified solid foam PVC board/ high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded beadings of required size using PVC solvent adhesive/ cement. The finished door shutter including SS hardware, 1 no. ss sliding bolt 200 x 10mm, 1 no. SS tower bolt 200 x 10 mm and 2 nos. SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9 mm and stainless steel screws of required size complete as per direction of the Engineer-in-Charge. (Cost of above hardware is inclusive in rates)PWD SOR Item No. 9.124 |
| 36 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screwsD.S.R. Item No. 9.21.1 ( Rate: 2392.65x0.735x109/107)+1%=1809.38) |
| 37 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)On one side onlyD.S.R. Item No. 9.22.1 (Rate: 478.00x0.735x109/107)+1%=361.48) |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new workD.S.R. 13.62.1 (Rate: 226.25x0.735x109/107)+1%=171.10) |
| 39 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 20 mm Dia D.S.R. 1.21.1 (Rate: 128.00x0.789x109/110)+1%=101.07) |
| 40 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 25 mm DiaD.S.R. 1.21.2 (Rate: 145.00x0.789x109/110)+1%=114.50) |
| 41 | Providing and fixing of junction box 200 x 250 mmPWD SI No 154 elctrical SOR 2018 |
| 42 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. Thetiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed vitrified floor tiles polished finish of size 600x1200mmMake: SimpoloD.S.R. Item No. 11.41A.2.2 |
| 43 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.600 x 600 mm (Make : Simpolo/Johnson)DSR 11.41.2 |
| 44 | Antiskid tilesProviding and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size600 x 600 mm (Make : Simpolo)DSR 11.41A.3.1 (Rate: 1464.85x0.735x109/107)+1%=1107.76) |
| 45 | Extra for grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm D.S.R. Item No. 11.48.2 (Rate: 309.05x0.735x109/107)+1%=233.71) |
| 46 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Make : Simpolo)DSR 8.31 (Rate: 1267.95x0.735x109/107)+1%=958.86) |
| 47 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalentD.S.R. 11.56.1 |
| 48 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels plain white marble/ udaipiur green marble / zebra balck marble area of slab over 0.50 sqmD.S.R. Item No. 8.2.2.2 (Rate: 5136.30x0.735x109/107)+1%=3884.20) |
| 49 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. D.S.R. Item No . 8.5 (Rate: 978.70x0.735x109/107)+1%=740.12) |
| 50 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite workD.S.R. Item No. 8.3.2 (Rate: 510.95x0.735x109/107)+1%=386.39) |
| 51 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.Make: Godrej/DorsetDSR 9.76 (Rate: 854.65x0.735x109/107)+1%=646.31) |
| 52 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.Make: Godrej/DorsetDSR 9.77 (Rate: 726.60x0.735x109/107)+1%=549.70) |
| 53 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: DSR 22.7.1(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofingcompound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 andapproved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65 mm.D.S.R. 22.7.1 (Rate:1684.60x0.735x109/107)+1%=1273.94) |
| 54 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase D.S.R 2021No 12.21.1 (Rate: 305.15x0.735x109/107)+1%=230.76) |
| 55 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R. No.12.22 (Rate: 298.25x0.735x109/107)+1%=225.54) |
| 56 | Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level. The thickness of POP ceiling shall be maximum 12mm & will include all the curves, coves, etc as per architectural design. The frame work shall be treated with one coat of primer of zinc coating of grade 350 as per IS 277 and shall be true to planers or slopes as specified.The joints in the expanded metal shall be provided only under the main steel frame work. The plaster of Paris shall be of calcium sulphate semi-hydrate variety, its fineness shall be such that when sieved through a sleeve of IS sieve designations 0.05mm for 5 min after drying the residue left on it shall not be more than 1% by weight. It shall not be too quick setting. Initial setting time shall not be less than 13 min. The average compressive strength of material determined by testing 5 cm cubes after removal from mould. After 24 hours and drying in an over at 40 c till weight of the cubes is constant, Shall not be less than 84 Kg/sq.m.The material will be mixed with water to a workable consistency; plaster of Paris shall be applied to the underside of expanded metal in suitably sized panels and finished to a smooth surface by steel trowels. The finished surface shall be smooth and true to planed slopes or curved as required. only frame work.Analysis |
| 57 | Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level. The thickness of POP ceiling shall be maximum 12mm & will include all the curves, coves, etc as per architectural design. The frame work shall be treated with one coat of primer of zinc coating of grade 350 as per IS 277 and shall be true to planers or slopes as specified.Flat surfacesD.S.R. 12.31.1 |
| 58 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately) Make: Ozone/hettichDSR No. 21.18 |
| 59 | Providing and fixing Stainless Steel H Shape Door HandleMake: Ozone/hettichMR |
| 60 | Providing & Fixing Floor Lock Make: Ozone/hettichMR |
| 61 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Make: Ozone/hettichdsr 9.82 |
| 62 | Providing and fixing factory made uPVC white colour sliding glazed door comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainlesssteel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (Make : Fenesta)Two track four panels sliding door made of (big series) frame67 x 50 mm & sash 46 x 82 mm both having wall thicknessof 2.3 ± 0.2 mm and single glazing bead / double glazingbead of appropriate dimension. (Area of door above 8.00sqm upto 10.00 sqm). sqm D.S.R. Item No. 9.147.A2.2 |
| 63 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDMgasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (whitepowder coated) casement handles, G.I fasteners 100 x 8 mm size forfixing frame to finished wall, plastic packers, plastic caps and necessarystainless steel screws etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, mullion (if required) shall be also fusionwelded including drilling of holes for fixing hardware\"s and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealant over backer rod ofrequired size and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge. (Single / double glass panesand silicon sealant shall be paid separately). Variation in profile dimensionin higher side shall be accepted but no extra payment on this accountshall be made.Note: For uPVC frame, sash and mullion extruded profiles minus 5%tolerancein dimension i.e. in depth & width of profile shall be acceptable.Casement cum fixed panel window having both end singlecasement panel, middle fixed panels and at top completelyfixed ventilator with S.S friction hinges (350 x 19 x 1.9)made of (big series) frame 67 x 60 mm , sash 67 x 80 mm& mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2mm and single glazing bead/double glazing bead ofappropriate dimension. (Area of window above 3.00 sqmupto 5.00 sqm).D.S.R. 9.147.E4.3 |
| 64 | 6 mm thick clear heat strengthened glass(Make : as provided by Fenesta)DSR 2618 |
| 65 | Float glass panes of nominal thickness 8 mm (weight not less than 20.00 kg/sqm)(Make : as provided by Fenesta)DSR 2408 |
| 66 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate52 mm thick cement concrete flooring with concrete hardener topping,D.S.R. Item No. 11.3.1 |
| 67 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).D.S.R. 2021 Item No. 10.28 |
| 68 | Providing & Fixing Laminated Glass for the Purpose of Fin (8mm clear toughened glass+1.52mm EVA Film+8mm clear toughened glass) 17.52mm with frame structure and all complete fittingMake: Ozone/hettichMarket Rate |
| 69 | Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating and chemical barrier under and around the columns pits, wall trenche basement excavation top surface if plinth filling junction of wall and floor along the external per meter of binding expension joints surrounding of pipes and conduit ete. Complete (Plinth area of the building at ground floor only shall be measured as per I.S.6313(part ii 1981). Aldrine emulsificable concentrate of any other approved material such as Hepthachlor or chlordance will be used. The rate of application of chemical emulsion shall be as follows.I- Treatment for masonry and foundatrion 5 litres per sqmII- Back fill in immediate contact with foundation 7.5 liters/sqm.III- Treatment of top surface of plinth filling 5 liters per sqmIV- Treatment junction of soil along extemal per meter building 7.50 litre/sqm.V- Treatment of soil under apron along extemal perimeter 5 Iiter/ sqm.DSR Item No. 2.35.3.1 |
| 70 | Providing and fixing 12mm Thick Toughened Glass Railing height of 3.5 ft with All Complete FittingMake: Ozone/HettichMarket Rate |
| 71 | Providing & Spreading polythene sheet 125microne |
| 72 | Add for using extra cement in the items of design mix over and above the specified cement content therein.D.S.R. Item No. 5.35 |
| 73 | Providing, fabricating and installation of structural glazing in aluminium section of 100 x 50 hollow section with 5mm one way reflective glass fixed over aluminium section with help of approved silicon sealent as per architect instruction & design etc. complete as per the specificationsMarket Rate |
| 74 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for workingplatform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for theworkmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.D.S.R. Item No. 14.72 |
| 75 | Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.D.S.R. Item No. 25.8 |
| 76 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel workD.S.R. Item No. 13.52.1 |
| 77 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)D.S.R. Item No. 10.15.1 |
| 78 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets,gates and similar worksD.S.R. Item No. 10.25.2 |
| 79 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. D.S.R. Item No. 10.16.1 ( Rate: 194.40x0.735x109/107)+1%=147.01) |
| 80 | Providng & Fixing of cast iron ornamental grill with all complete fitting.Market Rate |
| 81 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new workPWD SOR Item No. 1+2+3ii |
| 82 | Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: make: Visaza/ Italicadsr 11.53 |
| 83 | Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall bepaid for separately).Red sand stone - 30mm thick gang saw cut stoneD.S.R. 8.20.1 |
| 84 | Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc.shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin- charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid).D.S.R. Item No. 8.21 |
| 85 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.10 x 160 mmDSR Item No. 10.27.5 |
| 86 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5D.S.R. 19.7.1.1 |
| 87 | Construction of granular sub base (G.S.B.) by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, compete at per clause 401. (Analysis Rate) |
| 88 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints finished flush. Red sand stoneD.S.R. Item No. 11.28.1 |
| 89 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approvedby Engineer-in-charge).D.S.R. Item No. 16.69 |
| 90 | Providing & Fixing Straight Bench ( L- 5Feet) as per catlog code no. SB-02, Page No. 3(P.S.) |
| 91 | Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.D.S.R. 16.92 |
| 92 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-30 grade with approvedcolor design and pattern.D.S.R. Item No. 16.91.2 |
| 93 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.D.S.R. Item No. 11.55.1 |
| 94 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including Spacer, filling / grouting and finishing complete as per direction of Engineer-in-charge.Size of Stone 600x600 mmD.S.R. 11.48.2 |
| 95 | Design of overall Tensile structure for Umbrella including membrane (fabric) & Steel. Supply of fabricated steel as per design, Erection, Painting ofSteel structure & Installation & tensioning of Membrane (Fabric). Windload of 44 m/s. 1.38 Kn/Sqm. Designing, Supply, Fabrication & Erectionof Structural steel works with necessary Gusset Plates, Stiffener plates,Brackets, Bolts, Cleats etc., including painting. Structural frame shall beof Factory fabricated from structural steel using standard make IS 1239pipes. YST240 the steel design shall be as per IS code 800. All segmentsof the assembly will be welded properly By mig weld & all sharp edgesand corners are grinded. The steel shall be enamel painted with two coatsat site (with brush) over zinc chromate primer for goodfinish.APPROVED MAKE: JINDAL/ APPOLLO/ SURYA/NEUZONE,Designing, Supply Fabrication & Installation of PVDF fabricto be used is Serge Ferrari, France Flexilight 902S2(950 gsm) of tensilestrength 420/400 daN/5cm and 832S2(850 gsm) of tensile strength420/420daN/5cm. Steel cables, endplates, Tensioning hardware and allaccessories . The fabric used for the tensile structure to be analyzed for itsstrength requirement and behaviour in tensile engineering software Ixcubeand to be chosen after deriving through analysis. Fabric pattering is doneon Ixcube software considering fabric prestress, structure form, weldingjoints and fabric elongation properties. All fabric patterns are plotted onfabric rolls by plotter and welded on high frequency welding machine indust proof conditions. Fabric warranty period will be - 10 years. Colour offabric are white and Grey Approved Make: Serge Ferrari, FranceFlexilight 902S2(white color) & 832S2(grey colour) both sides PVDFcoated PVC fabric.All Structural wire rope shall be of 10 mm dia steelcore galvanized 6/19, conforming to IS Steel Cable Manual requirement.End plate should be hot dip galvanized. All Cables and end fitting shall bedelivered clean & dry. Swaged end fittings, Tensioning hardware (Viz.fork terminal, turn Etc) are galvanized & painted.Approved Makes:USHA MARTIN/DP WIRES complete as per drawing for finished item ofwork and as directed by the Engineer-in-Charge |
| 96 | Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominalsize in appropriate proportions as per approved & specified designcriteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by usingneedle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mmdeep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.Cement concrete manufactured in automatic batchingplant (RMC plant) i/c transportation to site in transitmixerD.S.R. Item No. 16.43.2 |
| 97 | Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and filling with 150 mm thick jamuna sand, including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge.D.S.R. Item No. 11.45 |
| 98 | The proposed Dynamic fountain at Village Box, will be a floating one where HDPE floats have been used as floatation device. There will be basically three water effects which will be driven by pumps controlled through VFD and the water effects will be illuminated by RGB LED lights. The following are the water effects being proposed.(make: premierworld/wet design/water works)1. Centre Jet, 25 mm outlet, bronze construction(make: premierworld/wet design/water works)2. Inside Drop Ring. 2.7 m dia, made of extruded aluminium pipe, consisting of 42 numbers brass ball joint nozzles. 3. Outside Drop Ring, 5.4 m dia, made of extruded aluminium pipe, consisting of 84 numbers brass ball joint nozzles(make: premierworld/wet design/water works) All the above three water effects will be programmed to appear in various combinations withvarious colours.4. Monosubmersible pumps with suction strainer: 3 hp– 3 nos; 2 hp – 4 numbers(kirloskar/ksb)5.Galvanised floatation structure with HDPE floats6.LED light, RGB, 36 W, 24 V DC, IP 68, SS construction(make: premierworld/wet design/water works) 7.Variable Frequency Drive, 3.7 kW – 3; 2.2 kW8.uPVC plumbing pipes, gate valves and non returnvalves 9. Electrical panel, indoor type, with Easy Stand AloneDongle – 1. (make: premierworld/wet design/waterworks) The panel should be placed within a roomwithin 10 m from the Pampa Sarovar. Our estimationof cables is on the basis of this panel location.10. Cables: 2.5 sq.mm x 3 core flat cable – 400 m; 1.5sq.mm x 4 core flexible copper cable – 700 m.PVC conduit pipes and earthing materials including all complete fitting. |
| 99 | Supplying and fixing of semi circle foam fountain with all necessary equipments(including Nozzle, Light, SMPS, Submersible pump, RGB controller, GI Ring, 1mm four core) all as per direction of Engineer in charge ( Analysed rate) |
| 100 | Supply and installation of Laminam , Italian 3+mm thick slabs with factory reinforeced double safety glass fibre mesh supported with Adhesion Test Report, confirming to IS 10545, MOH 5- 7, weight 8 kg/m2, Fire Rating (A2S1d0) with 25 years colours waarnty against UV rays and withstand the design wind pressure (As per IS- 875, Part-3), the Laminam) cladding panels are to be structurally glazed on aluminium hollow tubular frame work with compatible structural silicon adhesive and Cladding panels will be design and installed to the aluminium grid work using suitable connection brackets (Aluminium) as indicated in the tender drawings, the aluminium grid work will be installed on the Exterior/ interior dead wall. beam, column etc. with MS hot dip galvanised brackets at a regular intervals as per structural requirement, the vertical and horizontal grooves can be left open or closed as indicated in the tender drawings. All exposed tubular aluminium surface to be mill finish.Standard size 1000 *3000 mm. Weight-7.5 -8.0 kg/m2Breaking strength of ≥ 700 N as per ISO 10545-4Abrassion resistance MOH 5- 7 as per ISO 10545-6Flexual Strength 50 N/mm2 as per ISO 10545-4Water Absorption ≤ 0.1% as per ISO 10545-3Reaction to Fire-Testing-Porcelain Tiles Slabs (Plain Slab)- Class –A2s1d0 as per EN 13501-1 standards. Suitable for heavy rain area, Resistance to high humidity & Anti Fungle propertyDouble Fiber mesh is a protective backing in a tile. The purpose of the mesh backing is to ensure that the pieces of tiles ANalysis |
| 101 | Providing & Fixing Laminated Glass for the Purpose of Fin (8mm clear toughened glass+1.52mm EVA Film+8mm clear toughened glass) 17.52mm with frame structure and all complete fittingMake: Ozone/hettichMarket Rate |
| 102 | Providing, fabricating and installation of structural glazing in aluminium section of 100 x 50 hollow section with 5mm one way reflective glass fixed over aluminium section with help of approved silicon sealent as per architect instruction & design etc. complete as per the specificationsMarket Rate |
| 103 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:D.S.R. Item No. 10.2 |
| 104 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required1.00 mm thick with zinc coating not lessthan 275 gm/m²D.S.R. Item No. 12.1.1 |
| 105 | Providing and fixing Light Gauge Steel Framing (LGSF) walls, constructed using LGSF structures. Inner side finish with one layer stander board 8mm and one 9 mm thick HD cement fibre boards and outer side finish with dual layers of 9mm thick HD cement fibre boards The wall will be insulated with rockwool material having a density of 48kg/m³ and vapour barriers outer side only. Installation will be completed with the both side painting, necessary screws, fasteners, and structural bracing to ensure durability and stability.Market Rate |
| 106 | Providing and fixing Pvc laminated Gypsum false ceiling tiles at all heights of size 595X595x12mm and metal Ceiling for wet area of approved texture in horizontal level suspended on interlocking T-Grid of hot dipped pre coated GIsections.In the parking shed, the false ceiling is only considered for the top two floors. Market Rate |
| 107 | Rain Water HarvestingExcavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed with in a lead of 50 cm.a) Pipes 80mm to 300mm diameter.D.S.R. Item No. 2.10.1.2 |
| 108 | Providing & Fixing P.V.C.150 mm dia 6kg/sq.cmPWD SOR Item No. 730A |
| 109 | Providing & laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40mm nominal size) alround PVC pipes including bed concrete as per standard design.b)150mm diameter PVC Pipe.D.S.R. Item No. 19.2.2 |
| 110 | Constructing masonry Chamber 60x60x75 cm inside, in brick workin cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameterand 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mmnominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cementcomplete as per standard design : |
| 111 | Extra for depth for manholes: 900x800mm |
| 112 | Recharge PitEarth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. Up to 1.50 mt depthD.S.R. Item No. 2.8.1 |
| 113 | above 1.50 mt Up to 3.00 mt depthD.S.R. Item No. 2.8.1+2.11 |
| 114 | above 3.00 mt Up to 4.50 mt depth2.8.1+2.11x2 |
| 115 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).D.S.R. Item No. 4.1.8 |
| 116 | Brick work with common burnt clay F.P.S. (non modular) bricks of class 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) :D.S.R. Item NO. 6.1.2 |
| 117 | Reinforced cement concrete work in beams;suspended floors;roofs having slope upto15 landing s;balconies;shelves;chajjas;lintel s;bands;plain window sills staircases and spiral staircases up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)In Lintel & Projection D.S.R. Item No. 5.3 |
| 118 | Boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable method prescribed in IS: 2800 (part I), including collectingsamples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools,plants & machineries required for the job, all complete as per directionof Engineer-in-charge, upto 90 metre depth below ground level.300 mm diaD.S.R. Item No. 23.1.1 |
| 119 | Supplying, assembling, lowering and fixing in vertical position in borewell unplasticized PVC medium well screen (RMS) pipes with ribs,conforming to IS: 12818, including hire & labour charges, fittings &accessories etc. all complete, for all depths, as per direction ofEngineer-in-charge.100 mm nominal size diaD.S.R. Item No. 23.4.1 |
| 120 | Supplying, filling, spreading & leveling coarse sand of size range 1.5mm to 2 mm in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of Engineer -incharge. D.S.R. Item No. 23.7 |
| 121 | Supplying, filling, spreading & leveling gravels of size range 5 mm to10 mm, in the recharge pit, over the existing layer of boulders, inrequired thickness, for all leads & lifts, all complete as per directionof Engineer-in-charge. D.S.R. Item No. 23.6 |
| 122 | Supplying, filling, spreading & leveling stone boulders of size range5 cm to 20 cm, in recharge pit, in the required thickness, for all leads& lifts, all complete as per direction of Engineer-in-charge.D.S.R. Item NO. 23.5 |
| 123 | Sumbersible with BoringBoring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.D.S.R. Item NO. 23.1.1.3 400 mm dia |
| 124 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level.D.S.R. Item No. 23.2.1.3, 400mm dia |
| 125 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 200 mm nominal size diaD.S.R. Item No. 23.3.3 |
| 126 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size diaD.S.R. Item No. 23.4.3 |
| 127 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.D.S.R. Item No. 23.8 |
| 128 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge.D.S.R. Item No. 23.12 |
| 129 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of : 200 mm diaD.S.R. Item No. 23.13.3 |
| 130 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp.D.S.R. Item No. 23.14.3 |
| 131 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia.D.S.R. Item No.23.15.3 |
| 132 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50 mm dia nominal boreD.S.R. Item No. 18.12.6 |
| 133 | Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) D.S.R. Item No.18.17.4 |
| 134 | Supply of 100mm dia Johnson screen.N.S. |
| 135 | Supply of submersible pump of make KSB 3.00 HP with control panel, support wire etc. complete.N.S. |
| 136 | Supply and fixing of finolex of copper cable ISI marked submersible cable of size 6 sq mmN.S. |
| 137 | Plumbing & SanitaryProviding and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-ChargeMake : Jaquar/KohlerD.S.R. 17.81 |
| 138 | Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.Make : Jaquar/KohlerD.S.R. 17.80 |
| 139 | Providing and fixing Oval type wash basin, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tapMake : Jaquar/KohlerMarket Rate |
| 140 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.Make : Jaquar/KohlerD.S.R. 17.16A |
| 141 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe 40 mm dia Make : Jaquar/KohlerD.S.R. 17.28.1.2 |
| 142 | Providing and fixing 100 mm sand cast Iron grating for gully trap.Make : Jaquar/KohlerD.S.R. 17.29 |
| 143 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.Make : Jaquar/KohlerD.S.R. 17.31 |
| 144 | Providing and fixing toilet paper holder :C.P. brassMake : Jaquar/KohlerD.S.R. 17.34.1 |
| 145 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outletSand cast iron S&S as per IS - 3989Make : PRINCE/ASTRALD.S.R. 17.60.1.1 |
| 146 | Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :50 mm diaD.S.R. 17.61.3 |
| 147 | C.P.V.C. PIPESProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in ChargeConcealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes D.S.R. Item no. 18.9.2 |
| 148 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge25 mm nominal outer dia Pipes, Make: Astral/FinolexD.S.R. Item no. 18.9.3 |
| 149 | 32 mm nominal outer dia Pipes, Make: Astral/FinolexD.S.R. Item no. 18.9.4 |
| 150 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length 15 mm nominal bore, Make Astral/FinolexD.S.R. 18.21.2.1 |
| 151 | C.P. BRASS FITTINGSProviding and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore, Make : Jaquar/KohlerD.S.R. 18.49.1 |
| 152 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore, Make : Jaquar/KohlerD.S.R. 18.50.1 |
| 153 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore, Make : Jaquar/KohlerD.S.R. 18.52.1 |
| 154 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115 mm nominal bore, Make : Jaquar/KohlerD.S.R. 18.53.1 |
| 155 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.15 mm nominal bore, Make : Jaquar/KohlerD.S.R. 18.53A |
| 156 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms Make: JaquarD.S.R 2021 Item No. 17.71 |
| 157 | Providing and fixing toilet paper holder. Make: JaquarC.P. brassD.S.R 2021 Item No. 17.34.1 |
| 158 | Providing and fixing stainless steel kitchen sink as per I.S.13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required complete in all respect Kitchen sink with drain board 510 x 1040 bowl depth 200 mm. Make : Jaquar/Kohler/KohlerD.S.R 2021 Item No. 17.10.1.3 |
| 159 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Make : Prince/Astral32 mm diaDSR Item No. 17.28.1.1 |
| 160 | Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricksD.S.R. 18.76.1 |
| 161 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.D.S.R. 18.77 |
| 162 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.D.S.R. 18.78 |
| 163 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white plastic seat and lidMake: JaquarD.S.R. Item No. 17.2.1 |
| 164 | Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.Semi rigid pipe : 32mm diaMake : Finolex/AstralD.S.R. Item No. 17.28.1 |
| 165 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. D.S.R. Item No. 17.31.1 |
| 166 | Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms.Make: JaquarD.S.R. Item No. 17.71 |
| 167 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes.110mm diameterMake : Finolex/AstralD.S.R. Item No. 12.41.2 |
| 168 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm Make : Finolex/AstralD.S.R. Item No. 12.43.2 |
| 169 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.Make : Finolex/AstralD.S.R. Item No. 12.44 |
| 170 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20mm dia nominal outer dia pipesMake : Finolex/AstralD.S.R. Item No. 18.7.2 |
| 171 | 25mm dia nominal outer dia pipesD.S.R. Item No. 18.7.3 |
| 172 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.15mm dia nominal outer dia pipesMake : Finolex/AstralD.S.R. Item No. 18.8.1 |
| 173 | 20mm dia nominal outer dia pipesD.S.R. Item No. 18.8.2 |
| 174 | 25mm dia nominal outer dia pipesD.S.R. Item No. 18.8.3 |
| 175 | Providing & fixing CP brass bib cock of approved quality conforming to IS 893115mm nominal boreMake : JaquarD.S.R. Item No. 18.49.1 |
| 176 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 25 mm nominal bore Make : Jaquar D.S.R. Item No. 18.18.3 |
| 177 | Providing & laying PVC Pipe 100mm diameterMake : Finolex/AstralPWD SOR 730A |
| 178 | Providing & laying PVC Pipe 150mm diameterMake : Finolex/AstralMarket Rate 730B |
| 179 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.100mm diameter S.W. PipeD.S.R. Item No. 19.2.1 |
| 180 | 150mm diameter S.W. PipeD.S.R. Item No. 19.2.2 |
| 181 | Providing and fixing square mouth S.W. Gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design: 150 x 100 mm. size P type With Sewer bricks conforming to IS : 4885D.S.R. Item No. 19.4.1 |
| 182 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern.Make : JaquarD.S.R. 17.5.4 |
| 183 | DRAINAGE (For External Drainage Works)Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.D.S.R. 18.33.1 |
| 184 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5D.S.R. 19.4.3.1 |
| 185 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5D.S.R. 19.7.1.1 |
| 186 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular)bricks of class designation 7.5 D.S.R. 19.7.3.1 |
| 187 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :For pipes 100 to 250 mm diameterD.S.R. Item No. 19.21.1 |
| 188 | Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.15 mm nominal boreD.S.R. Item No. 18.84.1 |
| 189 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Make : Finolex/AstralD.S.R. 18.48 |
| 190 | Providing water cooler 40ltr cooling capecity 20L/HrsMake: Blue Star Including all Complete Fitting |
| 191 | Providing & Fixing Industrial RO Plant with all complete fitting Market Rate |
| 192 | Supplying, installation, testing and commissioning of grid interactive roof top solar photo voltaic power generation system including space frame |
| 193 | Sewerage WorkEarth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.D.S.R. Item No. 2.8.1 |
| 194 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :mm Internal Diameter R.C.C. pipe(a) 250 mm dia. DSR 2023 Item No. 19.6.3 |
| 195 | Providing and fixing in position the precast cement concrete in 1:2:4, 250mm saddle piller with 20mm guage stone grit coarse sand and cement as per drawing for different dia of pipe including rendring the surface smooth and cost of frame work including all labour T&P etc. required for proper completion of the work as directed by the E/I (Approved rate)250MM dia Saddle piller P.S. |
| 196 | Construction of RCC rectaongular man hole/chamber of size 900x600x1500mm internal size with M25 grade ready mix cement concrete, foundation concrete of 1:4:8 (1 cement : 4 coarse sand: 8 stone aggregate of 40mm size) and making necessary channel with cement concrete 1:2:4(1 cement : 2 coarse sand: 4 stone aggregate of 20mm size) finished with floating coat of neat cement, HD 20 circular man hole cover of size 600mm dia, foot rest of 20x20mm size rectangular cast iron and orange colour PVC coated. including cost of all material, labour, T&P, centering and shurttering etc. required for proper completion of the work as per design.Analysis Rate |
| 197 | Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.8 |
| 198 | C.C. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)D.S.R. Item No. 4.1.3 |
| 199 | Electrical WorksWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group Cmake:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.10.3 (Electrical 2022) |
| 200 | Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.make:Schneider/RR Kabel/Northwest 2X1.5 sqmm + 1x1.5 sqmm earth wireD.S.R. Item No. 1.14.1 (Electrical 2022) |
| 201 | 2X2.5 sqmm + 1x 2.5 sqmm earth wiremake:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.2 (Electrical 2022) |
| 202 | 2X4.0 sqmm + 1x 4.0 sqmm earth wiremake:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.3 (Electrical 2022) |
| 203 | 2X6.0 sqmm + 1x 6.0 sqmm earth wiremake:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.4 (Electrical 2022) |
| 204 | Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.19 (Electrical 2022) |
| 205 | Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 20mmmake:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.21.1 (Electrical 2022) |
| 206 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.TV antenna socket outletmake:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.24.7 (Electrical 2022) |
| 207 | Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.25 (Electrical 2022) |
| 208 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.26 (Electrical 2022) |
| 209 | Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module(75mm X 75 mm )make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.27 (Electrical 2022) |
| 210 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc. as required.make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.31 (Electrical 2022) |
| 211 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc. as required.make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.32 (Electrical 2022) |
| 212 | Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connectionetc. as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.33 (Electrical 2022) |
| 213 | Supplying and fixing brass batten/angle holder including connectionetc. as required.make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.34 (Electrical 2022) |
| 214 | Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.35 (Electrical 2022) |
| 215 | Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required. make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.41 (Electrical 2022) |
| 216 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.45 (Electrical 2022) |
| 217 | Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.D.S.R. Item No. 1.49 (Electrical 2022) |
| 218 | Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required. upto 450 mm sweep.D.S.R. Item No. 1.50 (Electrical 2022) |
| 219 | Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes. D.S.R. Item No. 1.51 (Electrical 2022) |
| 220 | Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required.D.S.R. Item No. 1.57 (Electrical 2022) |
| 221 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.make: Bajaj/Havells/CromptonD.S.R. Item No. 19.1 (Electrical 2022) |
| 222 | Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). make:Schneider/RR Kabel/Northwest12 way, Double doorD.S.R. Item No. 2.3.3 (Electrical 2022) |
| 223 | Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C\" series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make:Schneider/RR Kabel/NorthwestSingle PoleD.S.R. Item No. 2.10.1 (Electrical 2022) |
| 224 | Double PoleD.S.R. Item No. 2.10.3 (Electrical 2022) |
| 225 | 12 Way SPN. Make: Schneider/MDS UPPWD-2018 1025 (A) |
| 226 | 6 Way TPN Make: Schneider/MDS UPPWD-2018 1027 (A) |
| 227 | Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.Make:Schneider/RR Kabel/NorthwestD.S.R. Item No. 2.11 (Electrical 2022) |
| 228 | Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required. Make: As approved in U.P.P.W.D & C.P.R.I.D.S.R. Item No. 5.4 (Electrical 2022) |
| 229 | Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)Make: As approved in U.P.P.W.D & C.P.R.I.D.S.R. Item No. 5.9 (Electrical 2022) |
| 230 | Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.Make: As approved in U.P.P.W.D & C.P.R.I.D.S.R. Item No. 5.7 (Electrical 2022) |
| 231 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mmMake: Finolex/R.R. KabelD.S.R. Item No. 7.1 (Electrical 2022) |
| 232 | Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.Make: Finolex/RR Kabel 2 X 10 sqmm. (19mm)D.S.R. Item No. 9.2 (Electrical 2022) |
| 233 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.Make Finolex 50 mm DiaD.S.R. Item No. 14.13.1 (Electrical 2022) |
| 234 | Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.16 sq. mm 4 core PWD SOR 501(i)Make - Finolex/RR Kabel |
| 235 | Supply & fixing of Supplying Installation, testing and commissioning of GLINT RD Edge lit sleek round recessed mounted LED downlight with white powder coated die cast housing and di user for low glare illumination.BGSLO Sleek Recess RD 9W WH LEDMake : Philips/BajajMarket Rate |
| 236 | Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect.BCLAB 20W LED PSMarket Rate |
| 237 | S/f of 340 mm wide x 101.6 mm deep(3.0\") Concealed Box PWD SOR Item No. 1151c |
| 238 | Supply and fixing of LED Hanging light 24Watt.Make : Philips/Bajaj |
| 239 | Supply and fixing of LED Sqaure Ceiling light 24Watt.BPSLR Surface 24W LED WH SQ SDMake : Philips/Bajaj |
| 240 | Supply of 300mm dia sweep PVC body, 900±10% RPM Exhaust fan with guard and mounting arrangement. (As per MR-G11) (Rate=979/1.18300mm sweep. Make : Philips/Bajaj |
| 241 | SUBHEAD V-MAIN L. T. PANELSPANELSupply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB\"s to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. make:Schneider/RR Kabel/Northwest The minimum clearances between bus bars shall be as follows :Phase to phase - minimum 20mmPhase to neutral-minimum 15mmmtr PANELIncoming :One (1) No 100 Amp. 4P MCCB of 25KA Breaking capacity mtring :One (1) No. Sets Multifunction mtr nos incomingOne (1) No. of Phase Indication Lamp nos incomingBus Bar :One (1) No. 150 Amp.TPN aluminimum bus bar of suitable length.Outgoing :Phase indication lamps on nos outgoing to be provided.01 No.63 Amp 4P MCB. (10 KA)19 No.63 Amp DP MCB. (10 KA)02 No.40 Amp DP MCB. (10 KA)Panel described as above. N.S |
| 242 | Providing & Fixing Wall Focus LightAMAZE (BJFL 50W LED I) A resilient floodlight with toughened glass, aluminum housing, IP66 protection. Experience superior lighting for industrial and commercial settings.Make Bajaj/PhilipsMarket Rate |
| 243 | Providing & Installation of 8 Passenger Lift including all complete fitting.Make: Otis/Schindler |
| 244 | FIRE FIGHTING AND FIRE HYDRANT SYSTEMSupplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-\"F\" insulation, conforming to IS-325.(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.900 lpm at 35 m Head (DSR/AOR 2019 4.1) |
| 245 | Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required DSR(E&M)DSR 16.8) |
| 246 | Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet (Market Rate) P.S. |
| 247 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. (DSR/AOR No. 20) |
| 248 | Providing, laying, of \"C\" class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (25 mm dia) (DSR/AOR 7.1) |
| 249 | 32 mm dia (DSR/AOR 7.2) |
| 250 | 40 mm dia (DSR/AOR 7.3) |
| 251 | 50 mm dia (DSR/AOR 7.4) |
| 252 | 65 mm dia (DSR/AOR 7.5) |
| 253 | 80 mm dia (DSR/AOR 7.6) |
| 254 | 100 mm dia (DSR/AOR 7.7) |
| 255 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : (Pendent Sprinkler) (DSR/AOR 21.1) |
| 256 | Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :Horizontal side wall sprinklerD.S.R. Item No. 21.3 |
| 257 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia (DSR/AOR 11.6) |
| 258 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : (150mm dia) (DSR /AOR 14.7) |
| 259 | Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (DSR/AOR 13) |
| 260 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal (DSR/ AOR 9.1) |
| 261 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal (DSR/AOR 16.1) |
| 262 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket 30 m (DSR/AOR 17.1) |
| 263 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal (DSR/AOR 18.1) |
| 264 | Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 Make: NEWAGE (Market Rate)P.S. |
| 265 | Fire shaft door fabricated out of M.S. sheet and frame, door size of 1200 (W) x 2100 (h) with 4 mm thick glass, suitable Rubber beading and Locking arrangement and complete door shall be powder coated with red color powder coating P.S.(Market Rate) |
| 266 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (2 way-100 mm dia M.S. Pipe) (DSR/AOR 19.1) |
| 267 | Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and wheel type valve with initial Charge as per IS: 15683:2018 specification, bearing ISI Mark & EIL approved. Make: SAFEX PWD SOR Electrical 2018 Item No. 1132 |
| 268 | Co2 type Fire Extinguisher 6.5Kgs. Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval fitted with discharge, hose and horn with wheel type valve mounted on trolley wheels with initial charge as per IS: 16018 : 2012 specification, bearing ISI Mark & EIL approved. Make: PWD SOR Electrical 2018 Item No. 1132(A) |
| 269 | Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge. (Market Rate) P.S. |
| 270 | SUB-HEAD-IV FIRE ALARM SYSTEM Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all DELHI SCHEDULE OF RATES (E&M) 2018 65 accessories as required- 2 Nos.(one to act as standby) Item No. Description Unit Rate Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set.6 Loop Panel.D.S.R. Electrical 2022 Item No. 17.1.11 |
| 271 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.DSR E&M 2022_17.1.3 |
| 272 | Supplying, installation, testing & commissioning fire alarm ounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.DSR E&M 2022_17.1.7 |
| 273 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable Ethylene Propylene Runner (EPR) inshulation and LSZH inner bedding, steel wire armouring & FRLS outer sheath complete as required.DSR E&M 2022_17.5.1 |
| 274 | FIRE PUMPSSupplying, Fixing, testing & commissioning Diesel engine driven horizontal multistage single outlet centrifugal pump set capable of delivering 2850 LPM at 100 M head, having cast iron casing, bronze impellers, EN-8 shaft with bronze shaft sleeves directly coupled to Engine, 1500 RPM, complete on MS channel base plate with coupling guard, Day tank, Battery starting kit, etc. complete (Diesel driven Pump) 100mm gi pipe upto terrace with aluminium claddingDSR/AOR 2019 2.3 |
| 275 | Supplying, installation, testing and commissioning ofelectric driven pressurisation pump suitable forautomatic operation and consisting of following,complete in all respects, as required : (Jockey Pump)Horizontal type, multistage, centrifugal pump of castiron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase 50 HzAC supply with IP 55 class of protection for enclosure,horizontal foot mounted type with Class-\"F\" insulation,conforming to IS : 325.M.S.fabricated Common base plate, coupling, couplingguard, foundation bolts etc. as required.Suitable cement concrete foundation duly plasteredand with anti vibration pads.180 lpm at 88 m HeadDSR/AOR 2019 Item No. 3.1 |
| 276 | HVAC SYSTEMVariable refrigerant Volume/Flow System Outdoor UnitSupply, Installation, testing and commisioning of modular type variable refrigerant flow air conditioning system suitable for both heating and cooling with Inverter Scroll Compressor suitable for 415 ±10% V for outdoor unit including fully charged with refrigerant R410A to outdoor unit and all running refrigerant pipe as per detail given in specifications & drawings for the following configurations. It shall include anti vibration isolator pad for outdoors unit. The unit shall be complete in all respect and should match the specification , Drawings and Schedule. The Outdoor should be able to operate between -5 deg C to 52 deg C. The compressor should be of same manufacturer as of outdoor units.The unit shall have auto phase corrector so that unit can work in case of phase reversal and accumulator should be present in outdoor units to prevent liquid backflow in compressor..For better energy efficeincy and power saving the COP of ODU should be minimum 4.1 at AHRI conditions. Make: Mitsubishi Electric/Panasonic8HP (As per DSR_VRF/VRV _2019_1.1) (Rate=20618.15X8)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 16415x363/289)=20618.15 |
| 277 | 12 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=20618.15X12) Make: Mitsubishi Electric/Panasonic(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 16415x363/289)=20618.15 |
| 278 | 14 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=20618.15X14) Make: Mitsubishi Electric/Panasonic(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 16415x363/289)=20618.15 |
| 279 | Indoor Unit Cassette TypeSupply, Installation, Testing & Commissioning of following minimum capacity 4-way flow VRF/VRF Cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolator, cordess remote control etc., suitable for operation on single phase 230V + 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. Make: Mitsubishi Electric/Panasonic3.2 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.8)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 32787x363/289)=41182.29 |
| 280 | 2.8 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.5) Make: Mitsubishi Electric/Panasonic(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 32015 x 363/289)=40212.61 |
| 281 | Indoor Unit High Wall TypeSupply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multi speed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pump, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.1.65TR(As per DSR_VRF/VRV _2019_3.6) Make: Mitsubishi Electric/Panasonic(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 21746.00 x 363/289)=27314.18 |
| 282 | Indoor Unit Ductable TypeSupply, Installation, Testing & Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V + 10%, 50Hz, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.Mid Static Ductable Units (Minimum 45 Pascal External Static Pressure)3.40TR(As per DSR_VRF/VRV _2019_4.15) Make: Mitsubishi Electric/Panasonic(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 47651 x 363/289)=59825.29 |
| 283 | Supply Installation, testing & commissioning of Y-joints for various size of Refrigerant pipe including insulation. (As per MR-1) (Rate=4123/1.18) |
| 284 | Centralized controllerSupply Installation, testing & commissioning of Main Intelligent touch screen central controller system including all the accessories suitable to operate, monitor, on/off, temperature setting of all the indoor units individually complete as required and as specified. Make: Mitsubishi Electric/Panasonic (As per MR-2) (Rate=80703/1.18) |
| 285 | Copper Refrigerant PipingSupply, Installation, Testing & Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with with Class-O closed cell elastometric nitrile rubber insulation of specified thickness as given below for Suction and Liquid lines, exposed piping shall be protected with UV & water protective coating, all accessories as per specifications etc. as required:6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation (As per DSR_VRF/VRV _2019_5.1)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 245.00x363/289)=307.73 |
| 286 | 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.2)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 331.00x363/289)=415.75 |
| 287 | 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.3)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 466.00x363/289)=585.32 |
| 288 | 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.4)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 588x363/289)=738.56 |
| 289 | 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.5)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate :707.00x363/289)=888.03 |
| 290 | 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.6)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate :865.00x363/289)=1086.49 |
| 291 | 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.8) (As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 1108.00x363/289)=1391.71 |
| 292 | 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.10)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate x363/289)=1544.95 |
| 293 | 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.12)(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate x363/289)=1644.18 |
| 294 | Drain PipingSupplying & fixing of UPVC drain piping with all fitting such as bends, tees etc. necessary clamps, adequate support duly insulate with 9 mm nitrile rubber insulation complete as per technical specifications, requirement, standardard and drawings complete as required.50 mm dia(As per MR-3) (Rate=298/1.18) |
| 295 | 40 mm dia(As per MR-3) (Rate=204/1.18) |
| 296 | 32 mm dia(As per MR-3) (Rate=157/1.18) |
| 297 | 25 mm dia (As per MR-3) (Rate=121/1.18) |
| 298 | Inline FansSupply, Installation, testing and commissioning circular direct driven / cabinet inline fans of G.I. construction complete with centrifugal fan with motor, accoustically lined, canvass connection at inlet and outlet complete with electric panel with MCB and relays, with 5 Rm cabling and earthing complete as per standards, requirement and drawings. 3300 cfm 20 Make: Mitsubishi Electric/Panasonic mmwg S.P(As per MR-4) (Rate=45163/1.18) |
| 299 | 800 cfm 15 mmwg S.P(As per MR-4) (Rate=23520/1.18) Make: Mitsubishi Electric/Panasonic |
| 300 | 550 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Mitsubishi Electric/Panasonic |
| 301 | 500 cfm 15 mmwg S.P(As per MR-4) (Rate=17064/1.18) Make: Mitsubishi Electric/Panasonic |
| 302 | 450 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Mitsubishi Electric/Panasonic |
| 303 | 400 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Mitsubishi Electric/Panasonic |
| 304 | 350 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18) Make: Mitsubishi Electric/Panasonic |
| 305 | 300 cfm 15 mmwg S.P(As per MR-4) (Rate=14056/1.18) Make: Mitsubishi Electric/Panasonic |
| 306 | 250 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Mitsubishi Electric/Panasonic |
| 307 | 200 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18) Make: Mitsubishi Electric/Panasonic |
| 308 | 150 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Mitsubishi Electric/Panasonic |
| 309 | 100 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18) Make: Mitsubishi Electric/Panasonic |
| 310 | Propeller Type FanSupply, installation, testing and commissoning of propeller type fan for exhaust air complete with in and out gravity louvers, 3 pin socket with 5RM cabling complete as per specifications, requirement, standard and drawings. Make: Mitsubishi Electric/Panasonic200 mm dia, 5 mmwg S.P. (As per MR-5) (Rate=13039/1.18) |
| 311 | Exposed Copper Pipe CoatingSupplying and fixing of UV/fire/water, thermal protective coating, with canvas/glass fibre cloth, coating on copper pipe insulation by wrapping canvas/glass fibre cloth dipped in star bond/poly bond 30-36 complete as per specifications and drawings.(The price should be quoted considering minimum 3 coats of 30-36 chemical). (As per MR-6) (Rate=587/1.18) |
| 312 | Packaged Type AirwasherSupply, installation, testing and commissioning of floor mounted CELLULOSE FILL AIR-WASHER complete with double skin construction fabricated out of extruded aluminium sections with 0.8 mm thick pre-plasticised GI sheet on out side and 0.8 mm thick plane GI sheet inside with 25 mm thick insulation, 40 Kg / m3 density PUF insulation in between. The unit shall comprise of supply fan sections with DIDW backward curve fans (efficiency not less than 75%) suitable for static pressure as required, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply, giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing for Air washer section, 18G SS-304 water tank, Cellulose fill, water distribution header, PVC piping, butterfly valves, for quick fill, isolation of tank, pumps and brass strainers, Y strainers, fire rated flexible duct connections & aluminium volume control damper at blower discharge and necessary fittings, belt drive package, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. The fan and motor shall be mounted on aluminium extruded section.The unit shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen synthetic washable filters and four bend PVC drift eliminators and horizontal monoblock pumps of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor complete as required confirming to specification.3,000 CFM, 50 mmwg Static Pressure (As per MR-7) (Rate=205427/1.18) |
| 313 | Exhaust ScrubberSupply, installation, testing & commissioning of double skin exhaust scrubber of 0.6 mm inner and outer skin construction fabricated from precoated sheet blower housing with DIDW backward curved centrifugal blower with fan motor and belt drive arrangement with totally enclosed fan cooled class F insulation, with IP 55 protection, TEFC high efficiency motor type IE-3 suitable for 415+-10% volts, 50 HZ, 3 Phase A.C. supply, all accessories like common base frame, fan, motor pulley, belts, fire proof canvass connection, vibration isolator, prefilters, wet scrubber section, spray, nozzels, filters, M.S. frame for supports etc.complete as per specifications, requirement, standardard and drawings. Make: Mitsubishi Electric/Panasonic4,000 CFM, 65 mmwg Static Pressure (As per MR-8) (Rate=220100/1.18) |
| 314 | DuctingSupply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.G.I. Sheet Metal Ducting (Rectangular)Thickness 0.63 mm sheet (As per DSR_E&M _2022_16.12.1.1) (Rate=1080/1.12) |
| 315 | Thickness 0.80 mm sheet (As per DSR_E&M _2022_16.12.1.2) (Rate=1263/1.12) |
| 316 | Thickness 1.0 mm sheet (As per DSR_E&M _2022_16.12.1.3) (Rate=1381/1.12) |
| 317 | Thickness 1.25 mm sheet (As per DSR_E&M _2022_16.12.1.4) (Rate=1836/1.12) |
| 318 | Grilles / DiffuserSupply, installation, testing and commissioning of Aluminium extruted powder coated supply and return air grilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants). Make: Mitsubishi Electric/PanasonicSupplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.(As per DSR_E&M _2022_16.15)(Rate=9105/1.12) |
| 319 | Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required. Make: Mitsubishi Electric/Panasonic(As per DSR_E&M_2022_16.16) (Rate=5910/1.12) |
| 320 | Supply, fixing, testing & commissioning of Return air diffussers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. Make: Mitsubishi Electric/Panasonic(As per DSR_E&M _2022_16.18) (Rate=8121/1.12) |
| 321 | LouversSupply and fixing of Fresh / Exhaust air Aluminium extruded with bird screen, damper adjustable louvers as per specifications and drawings.(As per MR-9) (Rate=12986/1.18) |
| 322 | Volume Control DamperSupply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. Make: Mitsubishi Electric/Panasonic (As per DSR_E&M _2022_16.13) (Rate=7046/1.12) |
| 323 | Flexible DuctSupply of 25 mm glass wool insulated double lamination of metalize polister film parmantely bounded to a coated spring wire, helix and resistant construction of tear and pincture branch and collor where ever suitable of following sizes. Connected at both ends with necessary jublie clamps150 MM Dia(As per MR-10) (Rate=404/1.18) |
| 324 | IsolatorSupplying & installation of weather proof isolator with suitable rating near each outdoor unit and complete as required. 63 Amps(As per MR-11) (Rate=5136/1.18) |
| 325 | 40 Amps(As per MR-11) (Rate=5136/1.18) |
| 326 | Control & Transmission WiringSupplying & fixing control cum transmission wiring of copper in heavy duty conduits PVC conduits between indoor and out door unit. Make: Mitsubishi Electric/Panasonic (As per MR-12) (Rate=113/1.18) |
| 327 | Sub Panel For KitchenSupply, installation,testing & commissioning of sub panel board cubical compartmentalised, weather proof Floor/ Wall mounted made of 2.0 mm thick steel sheet duly painted complete with voltmeter, ammeter, indicating lights for selector switch, incoming/outgoing feeders,NO/NC contactors, CTS contactors complete as per specifications and requirement1 No. 32 Amps TPN incoming MCB1 set 40 Amps TPN Aluminium conductor bus bar duly sleeved.2 Nos. 25 Amps MCB outgoing along with 2 Nos. DOL starter for Scrubber Motor (5.5 kw) (1 No Spare). 2 Nos. 16 Amps MCB outgoing along with 2 Nos. DOL starter for Airwasher Motor (3.7 kw) (1 No Spare). Make: Mitsubishi Electric/Panasonic3 Nos. 6 Amps SPN MCB outgoing for Airwsher & Scrubber Pump.(0.37 / 0.55 kw) (1 No. Spare).(As per MR-13) (Rate=124723/1.18) |
| 328 | Power CablingSupply & fixing of PVC sheathed Aluminium / Copper cables for various equipments through walls/ceiling with appropriate clamps & fixing arrangement as per specifications and drawings.3C - 4 sqmm (Aluminium) for Airwasher & Scrubber(As per MR-14) (Rate=126/1.18) |
| 329 | 3C - 2.5 sqmm (Aluminium) for Airwasher & Scrubber pump(As per MR-14) (Rate=117/1.18) |
| 330 | 4C - 16 sqmm (Copper) (As per MR-14) (Rate=1102/1.18) |
| 331 | 4C - 10 sqmm (Copper) (As per MR-14) (Rate=753/1.18) |
| 332 | Cable TraySupplying and installation of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.2) (Rate=604/1.12) |
| 333 | 300 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.4) (Rate=777/1.12) |
| 334 | 450 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.6) (Rate=1137/1.12) |
| 335 | EarthingProviding and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (As per DSR_E&M _2022_5.15) (Rate=244/1.12) |
| 336 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.(As per DSR_E&M _2022_5.16) (Rate=70/1.12) |
| 337 | Ductable Split UnitSupplying,installation,testing & commissioning of ductable type split unit air-conditioners with evaporator with coil, fan and fan motor, aircooled condenser with hermatically sealed scroll compressor, condenser coil, propeller fans controls, mounting stand for ODU, control panel, corded remote, canvass connection as per standards, requirement and drawings. Make: Mitsubishi Electric/Panasonic3.0 Tons(1 Working & 1 Standby) for Server Room(As per MR-15) (Rate=88040/1.18) |
| 338 | Refrigerant Piping (For Split)Supplying & installation copper soft/hard refrigerant piping along (Circuit length) with control cabling and earthing should be insulated with 9 mm thick pipe section of nitrile rubber complete in all respect.3.0 Tons Ductable Split Unit(As per MR-16) (Rate=1981/1.18) |
| 339 | CCTV CAMERA SYSTEMSupply, , Installation Testing and Commissioning of 4 MP IP, 5 inch PTZ camera with 32*Zoom & 150 Meter IR with SD card supported. IP 67, Focal length 4.5 to 153mm, Frame rate max. 25/30fps, max. resolution 2560*1440 & Image Sensor 1/2.5\"\" progressive scan CMOS. |
| 340 | Supply, , Installation Testing and Commissioning of IP BulletCamera IR type with the following specificationMinimum 2.0 MP resolution, IP 67, 0.2 lux at F 1.2, 1/3\" DIS,3.6mm fixed iris lens. |
| 341 | PVC junctin IP rating 65 suitable for CCTV camera work. |
| 342 | Supply, laying and testing of unshielded twisted pair CAT 6 network cable (Violet Color) confirming to TIA/EIA standards, in heavy class FRLS PVC pipes / conduits, rate shall include necessary accessories all complete as required. Cost to include dressing the cable with proper accessories, proper addressing of cables using ferrules. labelling and end to end signal continuity testing for all ports. The wires shall be of different colours as required. |
| 343 | Supply, laying and testing of unshielded twisted pair armoured CAT 6 network cable (Black Color) confirming to TIA/EIA standards. Rate shall include necessary accessories all complete as required. Cost to include dressing the cable with proper accessories, proper addressing of cables using ferrules. labelling and end to end signal continuity testing for all ports. The wires shall be of different colours as required. |
| 344 | Supply, fixing, tesing & commissioning of CAT - 6, 8 position, 8 wire, network RJ 45 Connectors including crimping, testing end to end connectivity and necessary acessories all complete as required. |
| 345 | Supply, fixing, tesing & commissioning of RJ 45 In line Coupler Ethernet Network Cable Extender Connector including testing end to end connectivity and necessary acessories all completeas required. |
| 346 | Patch PanelSupply, installation, tesing & commissioning of 24 Port loadedpatch panel CAT6 (1U with rear wire manager) silver-platedIDCs (insulation displacement connection) for secure, reliablegas-tight connections |
| 347 | Switch PanelSupply, installation, tesing & commissioning of 24 Port PoENetwork switch 10/100/1000 GBps, managed type (1U withrear wire manager) with silver-plated IDCs (insulationdisplacement connection) for secure, reliable gas-tightconnections. |
| 348 | Network RackSupply, installation, tesing & commissioning of 6U rack withglass fronted door, lockable arrangement along with powerbus, ventilation fans including necessary fixing accessories allcomplete as required |
| 349 | Supply, fixing and checking connectivity of Patch cords (1m)CAT6 (RJ45 with moulded boots) at switch end |
| 350 | Supply , fixing and checking connectivity of Patch cords (1m)CAT6 (RJ 45 with moulded boots) at user end |
| 351 | Supply, Installation Testing and Commissioning of 32 channel Network Video Recorder (NVR) with TCP IP, RS 232, RS 485 Connectivity capable of handling Up to 5 MP cameras, 4k HD, 30 FPS and shall be ONVIF compatible. The NVR shall be suitable forconnecting multiple HDD (SATA / eSATA) of 8 TB capacity. The NVR shall have provision for multiple HDMI / VGA simultaneous output and also audio output. The cost to include setting up, commissioning of system all complete as required |
| 352 | GIGA byte switch 8 port. |
| 353 | Supply, and Installation of following capacity Hard disk drivesfor storing the recorded data - 8TB |
| 354 | Supply, Installation, Testing and Commissioning of LCD / LEDmonitor capable of displaying the output of the CCTV systemin the location specified at site- 31.5 inches TV with KVMsplitter & HDMI cable. |
| 355 | SWIMMING POOL EQUIPMENT PARTSupply, Instalation, Testing & Commissioning of Stainless Steel 316 ladders, width: 500mm wide, handrails dia 43mm stainless steel, non-slip steps provided with anchoring Socket.5 Step Standard Ladder with Anti-skid StepsModel: LD-ST-316-5 |
| 356 | Underwater LED LightsSupply, Instalation, Testing & Commissioning of 12V, 54 W under water stainless steel 316L LED light fixture ( IP 68) including all required assessories & making connection as required. with 2 Mtr power cord.Model: UWL-301611 |
| 357 | Power SupplySupply, Instalation, Testing & Commissioning of Transformer for LED Lights 12V DC, 30 ampModel: PS-301605 |
| 358 | Deck Box Supply, Instalation, Testing & Commissioning of ABS white plastic deck.Model: JB-301101 |
| 359 | Cleaning AccessoriesExtensive telescopic Handle, (2.4 - 4.8) metres long &1.1mm thick forcleaning attachment in anodized almunium.Model: GD-TP224A |
| 360 | Transparent Blue Polyethylene hose 40mm(1-1/2\") dia 15 m length.Model: GD-H3815PE |
| 361 | Surface net skimmer made in polypropylneModel: GD-LS301 |
| 362 | Deep bag net Skimmer made in polypropylneModel: GD-LS201 |
| 363 | Curved polybristle wall brush 450 mmModel: GD-BR401 |
| 364 | Test kit for PH and chlorine.Model: GD-TK907 |
| 365 | Hi-grade Stainless Steel Algae Brush - 10\"Model: GD-BR404 |
| 366 | Deluxe large Vacuum head with 4 wheels, alu-body, plastic handle, 1 1/2\" connection size 445x130 mm Model: GD-VH012 |
| 367 | Polybristle wall brush 10\" (26cm)Model: GD-BR402 |
| 368 | Chemical TCCA 90 (50 kg.)Model: GD-301921 |
| 369 | PLUMBING & ELECTRICAL PARTuPVC pipesProviding and fixing uPVC pressure Pipes (10kg/cm2) with plain socket suitable for solvent cement jointing conforming to IS:4985/2000 & fittings conforming to IS 7834/87. Cut to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc. The pipes & fittings shall be tested to a pressure of 10Kg/Sq.cm.32 mm dia |
| 370 | 63 mm dia |
| 371 | 75 mm dia |
| 372 | 90 mm dia |
| 373 | 110 mm dia |
| 374 | 160 mm dia |
| 375 | 200 mm dia |
| 376 | Ball ValveProviding and fixing Pvc lever operated ball valve of full flow with setting and gland of superior quality having minimum working pressure of 10kg/cm2 with union, flanges where as required.32mm dia |
| 377 | 63mm dia |
| 378 | 75mm dia |
| 379 | 90mm dia |
| 380 | Butterfly ValveProviding and fixing uPVC butterfly valves. Tested to a pressure not lessthan 10 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers complete as required.110 mm dia |
| 381 | 160 mm dia |
| 382 | 200 mm dia |
| 383 | Providing and fixing of uPVC Wafer Check Valve non-return valves (PN 10) complete with matching flanges, rubber insertion, nuts, bolts andwasher etc. of following sizes.90 mm dia |
| 384 | 110 mm dia |
| 385 | 160 mm dia |
| 386 | 200 mm dia |
| 387 | Puddles SleeveSupply & fixing of following sizes of heavy duty PVC puddle flanges (uPVC pipe(10 kg/cm2) fixed with flanges, length 400 to 600 mm length) on the wall of plantroom, balancing tank and the water body walls & Slab (As required). To be laid in between the steel reinforcement before RCC.Does not include any civil work.63 mm dia |
| 388 | 110 mm dia |
| 389 | 160 mm dia |
| 390 | 200 mm dia |
| 391 | 4 x 16 sq.mm |
| 392 | Supply, laying, testing and commissioning of following size PVC insulated sheathed copper conductor 1100 V grade unarmoured cable withrequired size of sleeves complete as required.4 x 2.5 sq.mm |
| 393 | 2 x 6 sq.mm |
| 394 | 2 x 2.5 sq.mm |
| 395 | 2 x 1.5 sq.mm |
| 396 | Supply, laying, testing and commissioning of following size PVC insulated sheathed copper conductor flexible multistand wire complete as required.25 m |
| 397 | Landscaping & HorticultureTrenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).2.1 (dsr hort. 2020) |
| 398 | Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).2.2 (dsr hort. 2020) |
| 399 | Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% forpayment).2.3 (dsr hort. 2020) |
| 400 | Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :2.4.1 (dsr hort. 2020) Screened through sieve of I.S. designation 20 mm |
| 401 | Supply & plantation of Trees upto 8ft to 10ft height well settled, all indigenous varieties (local) as per listed below, location and quantities shall be as per drawingMangifera Indica (Mango), Bacopa Monnieri (Brahmi), Terminalia Tomentosa (Asna), Azadirachta Indica (Neem) & Bambusa Bambos (Baans)Terminalia Arjuna (Arjun), Tectoria Grandis (Sagaun), Shorea Robusta (Saal), Stereospermum Tetragonum (Padal), Anogeissus Latifolia (Bakli), Madhuca Longifolia (Mahua) & Diospyros Malabarica (Gaub) Saraca asoca (ashok), Ficus religiosa (peepal), Ficus benghalensis (bargad), Aegle marmelos (bel) & Phyllanthus emblica (aonla) Pterocarpus Santalinus (rakta chandan), Butea monosperma (dhaak), Artocarpus altilis (kathal) & Santalum album (chandan) Saraca Asoka (Sita Ashok), True Cinnamon (Nag Kesar), Mangolia Champaca (Champa) & Mimusops Elengi (Maulsari) Saussurea Ggossypiphora (Mratyusanjeevani), Azadirachta Indiac (Neem) & Adiantum Venustum (Hansraj) |
| 402 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area. (two application) i/c cost of chemical) and as per direction of officer-in-charge.and as per directionof officer-in-charge.2.56 (dsr hort. 2020) |
| 403 | Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.2.33 (dsr hort. 2020) |
| 404 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 2.13 (dsr hort. 2020) |
| 405 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).2.25 (dsr hort. 2020) |
| 406 | Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 4.88 (dsr hort. 2020) |
| 407 | Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. 4.91 (dsr hort. 2020) |
| 408 | Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. 5.13 (dsr hort. 2020) |
| 409 | Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge. 5.17 (dsr hort. 2020) |
| 410 | Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge. 5.28 (dsr hort. 2020) |
| 411 | Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.1 (dsr hort. 2020) |
| 412 | Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.3 (dsr hort. 2020) |
| 413 | Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.10 (dsr hort. 2020) |
| 414 | Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.6.14 (dsr hort. 2020) |
| 415 | Providing and stacking of Ophiopogon jaburan (variegated) ,full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 6.21 (dsr hort. 2020) |
| 416 | Providing and stacking of Alstonia scholaris of height 150-165 cm. in bagof size 25 cm as per direction of the officer-in-charge. 7.4 (dsr hort. 2020) |
| 417 | Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.7.13 (dsr hort. 2020) |
| 418 | Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.17 (dsr hort. 2020) |
| 419 | Providing and stacking of lotus flower of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. Mr |
| 420 | Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.2 (dsr hort. 2020) |
| 421 | Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.8.7 (dsr hort. 2020) |
| 422 | Providing and stacking of Cassia laevigata of height 45-60 cm. in earthenpots of size 20 cm as per direction of the officer-in-charge. 8.11 (dsr hort. 2020) |
| 423 | Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.14 (dsr hort. 2020) |
| 424 | Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. 8.54 (dsr hort. 2020) |
| 425 | Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge. 9.2 (dsr hort. 2020) |
| 426 | Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.9.6 (dsr hort. 2020) |
| 427 | Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 9.14 (dsr hort. 2020) |
| 428 | Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge.11.17 (dsr hort. 2020) |
| 429 | Providing and Stacking of Aprajita White well developed in poly bag of size 20 cm as per direction of the officer-in-charge.11.18 (dsr hort. 2020) |
| 430 | IRRIGATION SYSTEMDRIP IRRIGATION SYSTEM FOR PLANTATION - ASYSTEM HEAD UNIT SNAD FILTER + BACKWASH ASSLY 2.5\"P.S. |
| 431 | SCREEN FILTER 2.5\"P.S. |
| 432 | ASSLY FOR FILTER 2.5\"P.S. |
| 433 | PRESSURE GAUGE + STOP COCKP.S. |
| 434 | PRV P.S. |
| 435 | NRVP.S. |
| 436 | NETWORK - FINOLEX HDPE & PVC PIPESHDPE PIPE 75 MM PN4 (TANK TO PLOT)P.S. |
| 437 | PVC PIPE 75 MM 4KG/CM2P.S. |
| 438 | PVC PIPE 63 MM 4KG/CM2P.S. |
| 439 | EMITTING SYSTEMFINOGOL PLAIN LATERAL 16 MMP.S. |
| 440 | DRIPPER 8 LPHP.S. |
| 441 | START TO END SET FOR DRIP LINE 16 MMP.S. |
| 442 | BARBED COUPLER 16 MMP.S. |
| 443 | TEE 16 MMP.S. |
| 444 | ELBOW 16 MMP.S.. |
| 445 | ELBOW 16 MMP.S.. |
| 446 | BALL VALVE 63 MMP.S. |
| 447 | FLUSH VALVE 63 MMP.S. |
| 448 | VALVE BOX 12\"P.S. |
| 449 | Pump: Crompton Greaves 10.00 Hp pump with necessary accessories.(Market Rate) P.S. |
| 450 | Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destinatin hoisting and fixing of accessories such as inlet,outlet over flow of all tanks capacity above 1000 to 20,000 litresD.S.R. 18.48 |
| 451 | BorewellBoring/Drilling bore well for required dia for Casing strainer pipeas per DSR No 23.1.1.1 ( depth upto 90 mtr) |
| 452 | Boring/Drilling of bore well of required dia for casing strainerpipe as per DSR No 23.2.1.1( beyond 90 mt upto 150 mtr deep |
| 453 | Supplying, Assembling , lowering and fixing in Vertical position in bore well unplasticized PVC medium well casing ( CM ) pipe ofrequired dia as per DSR No 23.3.2 ( 150 mm dia ) |
| 454 | Supplying, Assembling , lowering and fixing in vertical position in bore well unplasticized PVC medium well screen as per DSR No23.4.2 ( 150 mm dia ) |
| 455 | Providing and fixing bail plug/Bottom pug as per DSR No 23.15.2( 150 mm dia ) |
| 456 | Providing and fixing M.S clamp of required dia to the top ofCasing pipe as per DSR No 23.14.2 ( 150 mm dia ) |
| 457 | Providing and fixing of suitable sixe threaded mild steel cap asper DSR No 23.11.2 ( 150 mm dia ) |
| 458 | Crompton 3 HP Single Phase Centrifugal Monoblock Pump, MBQ32(1PH)-15 including Panel borad all Complete necessary accessories Fitting.Market Rate |
| 459 | External Electrical WorksPOINT WIRINGWiring for light point / fan point /exhaust fan point/call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point 1.5sq.mm FRLS PVC insulated copper conductor single core cable etc as required. (Make: Schneider/RR Kable/Northwest). D.S.R. Group A 1.1.1 |
| 460 | CIRCUIT/SUBMAIN WIRINGWiring for circuit/ submain wiring alongwith earth wire including excavation & filling the same as per site requirement with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (Make: Schneider/RR Kable/Northwest). Wire Sizes2x1.5sq.mm + 1x1.5sq.mm earth wireD.S.R. 1.7.1 |
| 461 | 2x2.5sq.mm + 1x2.5sq.mm earth wireD.S.R. 1.7.2 |
| 462 | 2x4 sq.mm + 1x4 sq.mm earth wireD.S.R. 1.7.3 |
| 463 | P.V.C CONDUITSupplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mmD.S.R. 1.21.2 |
| 464 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as requiredD.S.R. 1.29 |
| 465 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 ampspiano type switch, connection, painting etc. as required.D.S.R. 1.30 |
| 466 | DISTRIBUTION BOARDS & MCB\"sSupplying and fixing TPN sheet steel enclosure on surface/ recess along with 63 A 415 V \"C\" curve TPN MCB complete with connections, testing and commissioning etc. as required. (Make: Schneider/MDS).D.S.R. 2.1.2 |
| 467 | Supplying and fixing TPN sheet steel enclosure on surface/ recess along with 32 A 220 V \"C\" curve TPN MCB complete with connections, testing and commissioning etc. as required. (Make: Schneider/MDS).D.S.R. 2.1.1 |
| 468 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: Schneider/MDS) Single poleD.S.R. 2.10.1 |
| 469 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required. (Make: Schneider/MDS)D.S.R. 2.16 |
| 470 | EARTHING & MISCELLANEOUS ITEMS 5.8COPPER STRIP EARTHING:-Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) D.S.R. 5.8 |
| 471 | EARTH STATION:- Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosurewith cover plate having locking arrangement and watering pipeof 2.7 metre long etc. with charcoal/ coke and salt as required.D.S.R. 5.6 |
| 472 | CABLE TRAYSupplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 100 mm width X 50 mm depth X 1.6 mm thicknessD.S.R. 4.1.1 |
| 473 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.100 mm width X 50 mm depth X 1.6 mm thicknessD.S.R. 4.2.1 |
| 474 | Supplying and fixing of following ways surface/ recessmounting, vertical type, 220 V, DB MCB distribution board of sheet steel, dust protected, duly powder painted & water proof inclusive of Common neutral Bus Bar, earth Connection, din bar for mounting MCBs (but without MCBs and incomer ) as required (Make: Schneider/MDS)M.R. (P.S.) |
| 475 | PANELSINCOMING : -Providing and fixing following rating and breaking capacity and pole MCCB with sutable MCCB enclosure with thermomagnetic release and terminal spreaders in existing panel board including drilling holes in panel, making connections, etc. as required.100 A 25KA, 04 pole, TPN MCCB (make schneider,HPL)M.R. (P.S.) |
| 476 | BUS BAR :-Supplying, installing on wall, testing and commissioning of following capacity rising mains made of 1.6mm thick IP 42 sheet steel enclosure duly painted with powder coating, wall straps, fully PVC insulated 4 Nos Copper bus bars having current density of 80 A/ sq cm at nominal current rating in convenient sections and suitable for 415 V, 3 phase, 4 wire, 50Hz, A.C. supply with extension joints, fire proof barriers, expansion joints, thrust pads including jointing and earthing with 2 runs of galvanised iron strips etc. as required.( Havells & other brand) (Make: Schneider/MDS)100 A (S.C. rating for 1 sec - 20 kA)M.R. (P.S.) |
| 477 | CHANGE OVER:-Providing and fixing of on load change over switch of current rating 100 amp, 04 pole, 415 V & 50Hz front operated in sheet steel enclosure in existing panel board including drilling holes in panel, making connections, etc. as required.(Make: Schneider/MDS)M.R. (P.S.) |
| 478 | METERING, INDICATIONS AND RELAYS:-Providing and fixing AC Digital display voltmeter, Ammeter (3 phase, 0-500V AC, 0-500 A through CT) & R /Y /B phase LED Indicating lamp in existing panel board including drilling holes in panel, making connections, etc as required.(Make:Schneider/MDS)M.R. (P.S.) |
| 479 | CABLES & TERMINATIONALUMINIUM / COPPER CABLE (ARMOURED):- Supply and laying of the following 1.1 & 11 KV Aluminium/ Copper conductor XLPE insulated, PVC Sheathed, steel Armoured as per standard specifications. 4 core 50 sq.mm XLPE 11 KV grade Aluminium cable (Make: Finolex/RR Kable).M.R. (P.S.) |
| 480 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Above 35 sq. mm and upto 95 sq. mmD.S.R. Item No. 7.3.2 |
| 481 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.Above 95 sq. mm and upto 185 sq. mmD.S.R. Item No. 7.3.3 |
| 482 | CABLE END TERMINATIONS :- Supplying and making end termination with brass compression gland and aluminium/copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium/copper conductor cable of 1.1 & 11 KV grade as required.(Make: Finolex/RR Kable). 4 X 120 sq. mmM.R. (P.S.) |
| 483 | Providing & Fixing TETRIS LIGHT - BGBOS 605 9W LED BOLLARD with all complete fitting.LED bollard in rectangular shaped victorian design with opal acrylic di userand IP65 protection.Make BajajMarket Rate |
| 484 | P/F 30W AIO LED Solar street light(Hybrid) with 5M octagonal pole Model No. 30W-SOLAR BSZSL 30W LED HYB-STANDARD HYBRIDMake Bajaj |
| 485 | Providing & Fixing LED post top Light made in die-cast aluminium housing with decorative clear and opal acrylic di user with IP65 protection.Model No. BCF FLO 60W LED WH OP PTMake Bajaj |
| 486 | Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-38 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect.Make : BajajPWD Electrical SOR 2018 |
| 487 | Supply & Fixing of Decorative pole 4.0M. Height, 275mm Base Dia & 76.1mm Pipe Dia made of Galvanized steel pipes fitted with cast iron embellishment polyurethane paint coated. (Prices are without Brackets)Model No. MFHD - 228AMake : BajajMarket Rate |
| 488 | P/F 4M Tringa Column light with remote control TRI-Colour Light Column-4M BLSLC 50W LED TRI 4MMake BajajMarket Rate |
| 489 | Providing & Fixing Wall Focus LightAMAZE (BJFL 50W LED I) A resilient floodlight with toughened glass, aluminum housing, IP66 protection. Experience superior lighting for industrial and commercial settings.Make Bajaj/PhilipsMarket Rate |
| 490 | Providing & Fixing Spike Light with all complete Fitting.(SPYKZ BGSBL 9W LED WW)LED Spike/ Bush light with die-cast aluminium housing designed for rugged outdoor usage & IP65 protection.Make BajajMarket Rate |
| 491 | P/F 1.20 M. Height 30 watt Bollard Light with all complete fittingBAJAJ KOLUX 30W 30K 1.2M 165 BN Make Bajaj |
| 492 | Providing & Fixing 30W Stattic white merc square Projectors Light Including All complete fittingItem CodeBA SP B 120W (WHWW)Make Bajaj |
| 493 | Providing & Fixing BA 50W RGB white merc square Projectors Light Including All complete fittingMake Bajaj |
| 494 | Supply & Installation of D.P. Structure With AIR BREAK SWITCH having following specifications:- All as per preapproved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR .DP : Double pole structure on 2 no ISMB 150 x 100 mm, 10 mtr high using 7 no MS channel each of size 100 mm x50 mm x 2500 mm complete in all respect with nuts, springs washers, clamps as required.GO:Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3-ø, central postrotating double break isolator complete with MS hardware , copper moving & fixed contact ,assembly of 9 nos pin insulator ,GI pipe of suitable length for operation.DO: 3nos Vertical / Horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pininsulatorsLA: 3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv Overhead line with rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc asrequired.JUMPERS: 3 no 11kv acsr conductors mounted on pin type insularors as required. .GENERAL:The go shall beoperated by hand operated liver properly earthed with provision for locking mounted at 3 E230400 |
| 495 | Supply , Installation, Testing and Comissioning of 11KV, 630 A, 25 kA / 1 Sec, SF6 / VCB Indoor type panel HT board, free standing motor operated & withdrawal type fabricated from 2 mm thick CRCA sheet steel , With Ammeter, Voltmeter, PF Meter, KWH Meter, MDIMeter, Selector Switches as required, CRT-CT of required ratio ( 15VA ; Cl-1.0 / 0.5 ) PT (11 KV /110V/√3) , Fuses , IP42 Protection, 4 / 8 /10 / 12-window Annunciation Panel , AC/ DC Control voltage 24/48/ 110/230V , LED Indication lamps , S/C, O/C & E/F Protection (IDMT) Relays Alarm & trip contacts for Transformer protection ( High oil temperature , Buchholz protection ,high winding temperature), power pack 2 x 12 V,etc complete in all respect Ready To Use(RTU),OEM Must have BIS certificate and & shall have submit NABL / CPRI / ERDA lab type test reports before execution complete in all respect. All as per pre pproved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \"A\" attached with this BSR.E230500 |
| 496 | D. Electronic / Mechanical governor, Manual & electric Start ,Batteries with battry charger, Engine instruments panel,AVM pads All controls for operation of DG set are from outside the enclosure with DG control panel having Microprocessor based Gensetmonitoring & control system, MCCB/ACB of suitable rating, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level shall be lessthan 75 dB at a distance of 1 Mtrs. duly certified by authorisedagency etc. complete in all respect of following capacity :E. (A) Accoustic glass wool wall thickness should not be less then40mm and not less then 20mm PU foam upto rating 100 KVA.(B).Accoustic glass wool wall thickness should not be less then65mm and not less then 50mm PU foam upto rating 250 KVA.(C)Accoustic glass wool wall thickness should not be less then100mm for rating above 250 KVA.F. First filling of the fuel tank shall be done by contractor and the prevailing fuel cost at that time shall be reimbursed to the contactorby department.G. Servicing of the DG set (as per OEM guidelines) during the DLPperiod shall be done by contractor including all consumables,actualcharges shall be reimbursed to the contractor by department/clientcomplete in all respect.H. OEM Must have BIS certificate and & shall have submit NABL /CPRI / ERDA/ CPCB standards approved lab type test reportsbefore execution as required complete in all respect. All as per preapproved by Engineer in charge. For additional technicalparameters of products/ work. 365-400 kVA, 292-320 kWe Prime Market Rate |
| 497 | Supply , Installation, Testing and Comissioning of Synchronization panel complete in all respect suitable for following capacity DG sets. OEM Must have BIS certificate and & shall have submit NABL / CPRI / ERDA lab type test reports before execution as required complete in all respect. All as per pre approved by Engineer in charge.400KVAMarket Rate |
| 498 | Supply, Installation, Testing and Commission of indoor type floor mounted metal clad, 11 KV Outgoing VCB panel UPTO 630A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 25KA/3 and IAC A-FLR for 25kA/1sec.Make of Panel, Vaccum Interrupter and VCBshould be of same make.1. 11 KV , analog/digital type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 12 KV on outgoing 2. Ammeter, analog type, selector switches for ammeters. 3. Microprocessor based numerical relay with O/L, E/F and S/C protection. 4. Set of dual core dual ratio 3CTs of suitable ratio with sec 1 A of 15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection 5. Multifunction Meter E234302Outgoing upto 630 A VCB |
| 499 | SITC of battery bank of min 150 AH capacity comprising SMF/VRLA batteries , MS / Teakwood battery stand ,interconnect wiring etc as required complete in all respect of rating: E23530124 V DC |
| 500 | SITC of FCBC ( Float cum boost charger)suitable for 415V +/-10%, 50 Hz , 1-ǿ / 3 -ǿ Input & 24/ 48 /110 V DC OutputNatural Cooled, free standing in Sheet Steel enclosure,SCR controlled , regulation +/-1% , Efficiency > 75% on FLAC/ DC Instruments, Selector Switch,Built in DC Distribution Board (6 No MCB), indication , control as required of following rating: E23540115A + 15A |
| 501 | Poviding & Fixing Designer dust bin Monkey type with all fitting & acces. required for complition of job complete.(P.S.) |
| 502 | Providing, Fixing Horse Rider (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play (SKU: OKP_STA_024) or equivalent as aproved by engineer in charge.Market Rate |
| 503 | Providing & Fixing Fish Rider (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play (SKU: OKP_STA_029) or equivalent as aproved by engineer in charge.Market Rate |
| 504 | Providing & Fixing MERRY GO ROUND (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play or equivalent as aproved by engineer in charge.Market Rate |
| 505 | Providing & Fixing MONKEY BAR-SIMPLE (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play (SKU: OKP_STA_009) or equivalent as aproved by engineer in charge.Market Rate |
| 506 | Providing & Fixing PLAY 2 SEATER SEA-SAW(Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play SKU: OKP_STA_017 or equivalent as aproved by engineer in charge.Market Rate |
| 507 | Providing & Fixing SWING-A-ONE(Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete.Make: Okay Play ( | ECONOMY MODEL – 8 SKU: OKP_STA_014) or equivalent as aproved by engineer in charge.Market Rate |
| 508 | Providing & Fixing two way Slider (Made from non toxic durable LLDPE and plastic material, Adjustable height suitable for both indoors & outdoors, weather resistant & waterproof, Anti oxidation, Anti slip base & Anti UV) with all fitting & acces. required for complition of job complete. Make: Okay Play (FUNSTATION ECONOMY MODEL – 14, SKU: OKP_EMS 14) or equivalent as aproved by engineer in charge.Market Rate |
| 509 | Providing & Fixing two way Slider PLAYSTATION with all fitting & acces. required for complition of job complete. Make: OK PLAY MEADOW SKU: OKP_NP2 or equivalent as aproved by engineer in charge.Market Rate Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
