|
| 1 | Demolition of brick work built in cement mortar. |
| 2 | Demolition of cement concrete n exc. 15cm thick (unreinforced). |
| 3 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m for foundation in hard/dense soil. |
| 4 | M/L Hardcore of gauge n.exc. 63mm deposited, spread and levelled n.exc. 15 cm thick of broken bricks. |
| 5 | Providing PCC 1:1.5:3 type A-1 (20mm graded aggregate) |
| 6 | Providing RCC in beams, cantilevers,bressummers, lintels over 1.5m span type M-20, 1:1.5:3 (20mm graded aggregate). |
| 7 | Providing RCC in columns, pillars, piers,posts and struts type M-20, 1:1.5:3 (20mm graded aggregate). |
| 8 | TMT mild steel bars 10mm dia and over, cut to length, bent to shape and binding with mild steel wire (annealed) not less than 0.9mm dia. |
| 9 | Providing form work to sides and soffits of floor or roof beams, beamhaunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. & surface to be fair finished. |
| 10 | Providing form work to sides of pillars, posts, struts, piers, columns and stanchions & surface to be fair finished. |
| 11 | M/L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar. |
| 12 | Rendering 15mm thick on fair faces of brick work or concrete surfaces with 1:6 cement plaster. Surface to be finished even and smooth (without using extra cement) and applying one coat of white wash. |
| 13 | Preparation of new surfaces and applying two coat of cement paint on wall.Make - Snowcem/Indigo. |
| 14 | Preparation of old surfaces and applying two coat of cement paint on wall.Make - Snowcem/Indigo. |
| 15 | Providing 3mm thick wall care putty (Make:JK/Birla) |
| 16 | Preparation of new painted steel surfaces and applying two coats of synthetic enamel paint. Make: ASIAN (Apcolite) /BERGER (Luxul High Gloss) with red oxide primer |
| 17 | S & F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleatsetc. Fe 290 (Gde- E- 165). |
| 18 | S & F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. All the sheets shall have 28-32mm crests depth with 06 nos crest in one sheet and 02 ribswithin two crests for stiffning. Make- Tata/ JSW. |
| 19 | Cutting holes in brick wall built in cement mortar exc. half brick but not exc. one brick and making good . |
| 20 | Taking down old doors including shutter exc 1.5 sqm but n.exc.4sqm refixing in same opening. |
