|
| 1 | Engagement of labour for cleaning of flats from inside by brooming, washing floor with water, mopping of floor, removing spider net from walls and roofs, cleaning WC Pan with acid based liquid, cleaning wall tiles with liquid detergent, cleaning of sink and kitchen platform, removal of cement mortar and lime drops deposited on floor, kitchen platform etc, cleaning door and windows/ window grills, window panes with thinner complete as per direction of engineer-in-charge at all floor level (upto 6th Floor) and disposal of malba etc from flat to approved dumping ground. (Item shall be executed in atleast two stages) |
| 2 | White washing with lime to give an even shade : Old work (two or more coats) |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work |
| 4 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 5 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in-charge. Orissa pattern W.C Pan of size 580x440 mm |
| 6 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 7 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturatedpolyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 10 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) : 300x16 mm |
| 11 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378)a) 250x10 mm |
| 12 | b)150x10 mm |
| 13 | Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS : 7534 with necessary screws bolts, nut and washers etc. complete. (copper oxidized as per IS: 1378) |
| 14 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378) :100 mm |
| 15 | Providing and fixing M.S. handle in section window including bolts with nuts and screws etc. complete (weight of handle 180 gram) |
| 16 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 17 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 18 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 19 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 20 | Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length :15 mm nominal bore |
| 21 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : Flexible pipe : 32 mm dia |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 20 mm nominal dia Pipes |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 24 | Engagement of 1 number fitter for making water connection in allotted flat for fixing fittings and fixture and day-to-day repair and rectification of leakage from water line incuding necessary tool kits as per direction and satisfaction of engineer-in-charge (Fittings shall be supplied by the department), the fitter shall be available on call as and when required at the site of work. |
| 25 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 26 | White washing with lime to give an even shade : New work (three or more coats) |
| 27 | Engagement of welder for repair work in the windows, doors inclduing welding machine and other material required for the work complete as per the direction of the engineer-in-charge |
| 28 | Providing and fixing stainless steel sink waste coupling of required size as per the direction of engineer-in-charge |
| 29 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378):300 mm weighing not less than 330 grams |
| 30 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding |
| 31 | Adjust for GST by multiplying 0.973 =2719888.00 |
| 32 | 3% Cost Index |
| 33 | Conditions: 1 Payment w.r.to Item no 1, 23 & 26 shall only be made after flat is ready in all respects.2 Labour shall be available as and when required otherwise a penalty deemed fit by the Engineer-in-charge shall be recoveredw.r.to Item 1, 23 & 26.3 Engineer-in-charge may close the agreement before stipulated date of completion if there were no requirement of repair of flats.4 Number of flats to be repaired will depend on the allottement during the period of agreement.5 If any financial loss to the department due to delay in work of flat occurs shall be borne by the agency and no claim shall be entertained by the department. |