|
| 1 | बिना पॉलिश का रफ कोटा स्टोन सीधे 20 mm मोटाई में सीमेंट मसाले 1:4 के ऊपर समतल कर लगाना तथा जोड़ों में सीमेंट मसाला 1:3 का भरकर फलश टीप करना |
| 2 | वेरद्धा पत्थरो का सीमेन्ट मसाला 1:6 मसाले में खरंजे का कार्य हेतु पत्थरों की आपूर्ति,अन्य निर्माण सामग्री की आपूर्ति, सीमेन्ट मसाले मे खरंजा लगाना, दो पत्थरो के बीच के खाली जगह को सीमेन्ट मसाले से पूरी उचाई तक भरना, होदा में से निकली अतिरिक्त मिट्टी का 50 मीटर तक निस्तारण करना। |
| 3 | नींव तथा कुर्सी में पत्थर की वे रद्धा-ढोका सीमेंट-बजरी मसाले में, मय बगल की झिरी बन्द करना तथा तराई आदि सहित। |
| 4 | सीमेंट कंक्रीट 1 सीमेंट : 5 बजरी तथा 10 गिट्टी पत्थर की 40 मिमी नामीय माप की नींव में डालना,कूटना तथा तराई आदि सहित।1:5:10 (i) 40 एमएम क्रेशर ब्रोकन पत्थर की गिटटी के स्थान पर हाथ से टूटी हुई रोडी के उपयोग करने पर वही मात्रा देय होगी परन्तु गिटटी की दर में 30 प्रतिशत की कटौती की जावेगी।(ii) Vibratar and mixure का उपयोग नहीं करने पर 3% कटौती की जावे |
| 5 | नीव, खाई,परनाला में 1.5 गहराई तक मिट्टी की खुदाई करना , तल को कूटना , पानी डालना, बगल को संवारना , खुदी मिट्टी को बाहर निकालना, नीव भरने के बाद खाली स्थानों को पुन: मिट्टी से भरना तथा बची हुई मिटटी को 50 मीटर की दूरी तक निस्तारण करना |
| 6 | आर.सी.सी. काम के लिए लोहे को काटना, मोड़ना तथा स्थान पर लगाना तथा बांधने का कार्य मय आपूर्ति के । |
| 7 | सीमेन्ट प्लस्टर दीवार पर 1:6 अनुपात में सीमेन्ट - बजरी मिलाकर जोडों को कुरेदने तथा 14 दिन तक नियमित तराई सहित,12 मि.मी. मोटाई |
| 8 | सेन्टरिंग\"शटरिंग (तख्ता एवम ढुलाबंदी) का आर.सी.सी. छत, स्लेब, छज्जे, लिन्टल आदि डालने के लिए लगाना 4.5 मीटर ऊचाई तक के लिए तथा हटाना आदि विशेष विवरण के अनुसार। शटरिंग स्टील |
| 9 | POMMEL HORSE Providing and fixing of Pommel Horse of size not less than 2150mm (Length) x 800mm (Width) x 800mm. (Height), to enhance the flexibility of lewer limbs, waist and abdomen. The main structure frame shall be made from G.1. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The handle frame be minimum of 32NB shall be made from \"C\" Class GL pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. |
| 10 | STANDING SEATING TWISTERProviding and fixing of Seating & Standing Twister of size not less than 1700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 dick. The NB, 50 NB, and 25 NB shall be made from \"C\" class GL. pipe. The frame of Seating & Standing twister of minimum 25 NB & Foot resting frame of seating side shall be made from \"C\" class G.L. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm diameter and handle 10mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done by Pure Polyester powder of Ackzonoble Berger/ Nerolac Paint with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. |
| 11 | SIT UP BOARD DOUBLEProviding and fixing of Sit up Board double of size not less than 1760mm (Length) x 1140mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from \"C\" class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. |
| 12 | CHEST PRESSProviding and fixing of Chest Press of size not less than 2000mm (Length) x 710mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast 250 mm & 10mm thick. The handle frame shall be made up from atleast 32NB C class GL pipe. The seats and Back rests to be find on the outer frames shall be made up of MS Sheet of size not less than 130mm X 300 mmm thickness. Closing Cape shall be made Thigh quality Fiber reinced Planic material. High tensile meel with galvanized nuts & bolts shall be used for sembly. The powder coating shall be done with Pore Polyester powders from Ackzonoble Berger Nerolac Paints with 60 micron thickness, complete in all respect including fixing the M.S. holdfed in cement concrete to hold the whole structure, under the derectives of Engineer-in-charge to fullfil the functional requirement. |
| 13 | LEG PRESSProviding and fixing of Leg Press of size not less than 1840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made. from G.l. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. The Sleeve frame minimum of 1001 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of 130mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used. for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in charge to fullfil the functional requirement. |
| 14 | सीमेंट कंक्रीट 1:2:4/1:1.5:3 मिश्रण की प्रवलित सीमेंट कंक्रीट में डालना तथा आपूर्ति करना, छत की स्लैब, छज्जे, बीम, लिंटल आदि में दबाना, तराई करना तथा सतह को 1:3 सीमेंट मसाले से समतल करना आदि समेत पाडबन्दी सहित परन्तु स्टील तथा शटरिंग की कीमत अलग से।With 1:1.5:3 (1 cement : 1.5 : coarse sand : 3 graded stone aggregate 20mm nominal size) |
| 15 | Board (IronPlate 3*4 Feet with Post,Fixing in CC,(सूचना बोर्ड साइट पर लगाना सहित ) Please Enable Macros to View BoQ information |
