|
| 1 | Work |
| 2 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead |
| 3 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 4 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 5 | Dismantling roofing including ridges , hips ,valleys and gutters etc and stacking the material within 50 metres lead of.Dismantling cement asbestos sheet |
| 6 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of.Dismantling dismantling GS corrugated sheet |
| 7 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)) |
| 9 | Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth in: 6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources |
| 11 | Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in plain arch work in superstructure above plinth and upto floor five level in cement mortar 1:4 (1 cement : 4 coarse sand) including centering and shuttering complete. |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Mild steel and Medium Tensile steel bars |
| 14 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.3 Suspended floors, roofs, landings, balconies and access platform |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 Suspended floors, roofs, landings, balconies and access platform Foundations, footings, bases of columns, etc. for mass |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 18 | CEMENT PLASTER (IN COARSE SAND) 12 mmcement plaster : 1:4 (1 cement : 4 coarse sand |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 20 | Distempeering with 1 st quality acylic distemper ( ready mixed) having VOC content less than 50gm/litre , of approved manufacturer and of required shade and color all complete to achieve even shade ands color New Work ( two or more coats)over and including water thinnable primming coat with cement primer hab=ving VOC content less than 50gm/litre |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately |
| 22 | Melamine polishing on wood work (one or more coats |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) |
| 25 | Renewing glass panes, with wooden fillets wherever necessary float glass panes of nominal thickness 5mm ( weight not less than 12.5 kg /sqm) |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, |
| 27 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. as per DSR 2023 code 11.41.1 |
| 28 | Pointing on tile work with cement mortar 1:3( 1 cement :3 fine Sand) Flush / Ruled/ Struck or weathered pointing |
| 29 | Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade 8mm thick granite stone of any required color |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-lll) derived from natural sources : 6 graded stone aggregate 20 mm nominal siz |
| 31 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 32 | Providing and fixing 65mm thick fine dressed red sand stone flooring over 20mm avg. thick based of lime mortar 1:1:1, (1 Lime, 1 Surkhi, 1 Coarse sand) including pointing with lime mortar 1:2 (1 Lime, 2 Stone dust) mixing with color pigement to match the shade of stone etc complete. |
| 33 | Buff Sand Stone projections 35 mm thick 30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete. |
| 34 | Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with a mixture of pigment matching the stone shade :Buff sand stone mouled bracke |
| 35 | Providing and fixing Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 36 | Making soak pit 2.5m diameter 3.0 m deep with a 45*45cm dry brick honeycomb shaft with bricks and S.W Drain pipe 100mm diameter, 108 m long complete as per standard design |
| 37 | Providing and laying cement concrete 1:5:10 (1 cement:5 coarse sand 10 graded stone aggregate 40mm nominal) all-round S.W. pipes including bed concrete as per standard desig |
| 38 | Provision for electrical articles for providing electricity in office of ISI marks & approved by ASIPlastic PVC Batten (3M) |
| 39 | PVC Flexible Pipe (Bdl) |
| 40 | Junction Box for Plastic PVC Batten |
| 41 | fan clip for ceiling for G |
| 42 | PVC Open Switch Board BOXES 12M [EACH] |
| 43 | PVC Open Switch Board BOXES 8M [EACH |
| 44 | PVC Open Switch Board BOXES 4M [EACH |
| 45 | PVC Open Switch Board BOXES 2M [EACH |
| 46 | Suntech 12 Way SPN Metal White Double Door Distribution Board MCB Box Suntech 12 Way SPN Metal White Double Door Distribution Board MCB Box [EACH] |
| 47 | PVC Insulated 6 mm Single Core Flexible Copper Wires & Cables polycab/crompton/hevells 90mtr [EACH |
| 48 | PVC Insulated 2.5mm Single Core Flexible Copper Wires & Cables polycab/crompton/hevells 90 mtr [EACH |
| 49 | PVC Insulated 1.5mm Single Core Flexible Copper Wires & Cables polycab/crompton/hevells 90 mtr [EACH] |
| 50 | PVC Insulated 1 mm Single Core Flexible Copper Wires & Cables polycab /crompton/hevells 90 mtr [EACH |
| 51 | PVC Open Switch Board BOXES 12 M Cover Plate [EACH] |
| 52 | PVC Open Switch Board BOXES 8M H Cover Plate [EACH |
| 53 | PVC Open Switch Board BOXES 4M Cover Plate [EACH |
| 54 | PVC Open Switch Board BOXES Crabtree Athena 2M Cover Plate [EACH] |
| 55 | PVC Open Switch Board BOXES 1M Cover Plate [EACH |
| 56 | Polycarbonate Bulb Holder for Wall [EACH] |
| 57 | Havells Crabtree Athena 5 Step Fan Regulator - 2 Module [EACH |
| 58 | Havells Crabtree Athena 6A Five Pin Socket [EACH] |
| 59 | Havells Crabtree Athena 6A One-Way Switch (White) [EACH] |
| 60 | Havells Crabtree Athena 6A-16A Three Pin Combined Shutter Socket [EACH |
| 61 | Havells Crabtree Athena 16A OneWay Switch with Indicator (White) [EACH |
| 62 | Havells DHMGCDPF032 PVC Plastic 32A MCB DP C Curve (White) [EACH |
| 63 | Havells 32A Single Pole MCB, Multi, Standard (HA-SPMCB32) [EACH] |
| 64 | Jaset Innovations Chipboard Screw with Saw Thread and Nylon Wood Dowel – White Zinc Plated – Flat Pozidriv Counter Sunk Head – Assorted Small Sizes – Pack of 258 pcs [EACH] |
| 65 | Havells Ventil Air DX 200mm Exhaust Fan (White) [EACH] |
| 66 | Led Light ( watt / Bulb/ Bulk [EACH] |
| 67 | Fan box for roof [EACH] |
| 68 | Havells Fan 3 Blades Ceiling Fan [EACH] 48\" |
| 69 | Havells fan wall mounted [EACH] 24\" |
| 70 | PVC Insulated 4 mm Single Core Flexible Copper Wires & Cables polycab/crompton/hevells 90mtr [EACH |
| 71 | Provision for Sanitory Work, Water Supply & Drainage of ISI marks & approved by ASI Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 liters low level white vitreous China flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.3.1 W.C. pan with ISI marked white solid [EACH] |
| 72 | Polyethylene water storage tank with cover and suitable locking arrangement [LTR] |
| 73 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2 Flexible pipe 17.28.2.2 40 mm dia [EACH] [EACH] |
| 74 | Providing and fixing beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick [RMT] |
| 75 | Wash basin fixed in slab with all fittings and brass pressing tabs for washbasin. [EACH] [EACH |
| 76 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. [EACH] [EACH] |
| 77 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore [EACH] [EACH] |
| 78 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :18.49.1 15 mm nominal bore [EACH] [EACH |
| 79 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore [EACH] [EACH] |
| 80 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore [EACH] [EACH |
| 81 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore [EACH] [EACH] |
| 82 | uPVC Waste Pipe 100 MM with necessary T, Corner and joints with chemical to fix and seal. (Mtr) [EACH] [EACH] |
| 83 | uPVC Waste Pipe 150 MM with necessary T, Corner and joints with chemical to fix and seal. (Mtr) [EACH] [EACH] |
| 84 | CI Pipes 300 mm dia per RMT [RMT] |
| 85 | CI PIPE 6INCHES (150 MM) PER RMT [RMT] |
| 86 | Constructing brick masonry chamber for undergroundC.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg),R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete asper standard design: |
| 87 | “Providing and laying at or near ground level factory- made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints … including making drainage opening wherever required, complete etc. as per direction of Engineer-in-charge. |
| 88 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of coarse sand, compacting and proper embedding/laying of inter-locking paver blocks into the sand bedding layer through vibratory compaction by using plate viberator, filling the joints with sand and cutting of pavor blocks as per required size and pattern , finishing and sweeping extra sand. complete as per direction of Engineer-in-charge |
| 89 | Provision for engagement of casual labour for shifting of material from main gate to workshop by head load with loading cycle rickshaw including loading unloading at site with in lead 200 mtr approx ( Each) |
| 90 | Provision for engagement of supervisor to supervise the conservation work day to day at the site |
| 91 | Removal of collected malwa from monument to outside of Municipal limit by tractor/trolly/ truck etc, manually by labours from Monument/site to main gate lead 250 mtr approx and main gate to dumping ground by machanically lead 25 km approx. |
