Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge. |
| 2 | Demolition cement concrete (unreinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials as directed by Engr-in-Charge and all as specified. |
| 3 | Demolition of cement concrete (reinforced) in landing slab, chullah hoods ,manhole covers , Roofs ,Floors, chhajja,beams, stair case, landing, chajja and similar suspended work complete all as specified and directed. |
| 4 | Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specifiedand directed |
| 5 | Demolition of brick work or stone/boulder masonry built in cement mortar incl all quoins, arches, pillars& precast concrete masonry etc complete all as specified & directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 but each complete all as specified & directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 but n exc 4 sqm each complete all as specified & directed. |
| 8 | Taking down of shutter exc 1 sq. m and n exc 2 sq. m each complete all as specified & directed. |
| 9 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc,laid , bedded and pointed in any mortar all as specified & directed. |
| 10 | M&L 50mm thick cement concrete 1:3:6type C2 (using 40mm graded crushed stone aggregate) as in plinth protection path laid in panel surface finished even and fair using extra cement complete all as specified and as directed |
| 11 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating complete all as specified and directed. |
| 12 | M&L for PCC (1:4:8) type D-2 (Using 40mm stone aggregate) as in foundation,bsae/sub base concrete all as specified and directed. |
| 13 | Providing precast cement concrete 1:2:4 type B-1 as in landing, cover slabs (for manholes etc) Chajjas, water troughs, managers, shelves and SImilar article with plain faces complete all as specified and directed. |
| 14 | M&L plain cement concrete 1:2:4 type B0 in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 15 | M&L rendering 15mm thick in cement mortar 1:4 including WPC @ 3% by weight of cement on stone/brick masonry finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.Note : quoted rate is deemed to be inclusive for work at any height and location including cost of scaffolding and all other equipments reqd to execute the work complete all as specified and directed. |
| 16 | M&L for 10mm thick cement plaster in CM 1:6 on other than fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 17 | M&L for Rough cast plaster on exterior wallsapplying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse sand and cement in the raio of 1:1:1 shall be applied and finished even.The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered completeall as specified and directed by Engineer in Charge |
| 18 | Demolition of existing roof treatment of any description including cement plaster, roof padding, APP Membrane and cement tiles any thickness from the roof surfaces of buildings including cleaning of top surfaces in all respect and preparing for further treatment and taking out and removing the rubbish, debris outside MoD land complete all as specified and as directed. |
| 19 | M&L for 15mm thick screed bed on fair faces of concrete/brick surfaces in CM1:4 with water proofing compound @ 3 % of wt of cement finished even and smooth in order to maintain proper slope over existing roof surfaces for laying APP based polymeric membrane finished complete all as specified and directed. (Polymeric membrane and WPC shall be meausred and paid seperately here-in-after) |
| 20 | Supply onlywater profing compound complete all as specified and as directed. |
| 21 | M&L water proofing treatement to RCC roof slab including parapet comprising of following course of treatement/specified from bottom to top (a)Applying Bituminous primer 85/25 @ 0.40 Ltr per sqm over plastered surfaces of roof including parapet surfaces. (b) Over the priming coat laying one layer APP based polymeric membrane of approved manufacturer, 3 mm thick weight not less 3.6 Kgs/Sqm and upper side of membrane thermally insulated with white mineral gravel finish, unifirmly embeded during manufacturing process shall only be used, it shall be laid by torch application side overlap should be 75mm and end shall be 100mm.For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside parapet in groove.The same shall be finished by a membrane flashing complete all as specified and directed. |
| 22 | M&L for rendering 5 mm thick in CM (1:3) as in ceiling and finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L taking down and removal of loose / disintegrated old concrete up to 50mm depth/ plaster and cleaning all loose dust washing with water and applying bonding coat nito bond AR or equivlent of modified styrene butadiene emulsion (SBR bonding agent by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete/ screed concrete with old surface etc complete all as specified and directed. |
| 24 | M&L applying 15mm thick plaster with polymer modified mortar fortified with SBR (Nitobond SBR 45) in proportion 1:3 by weight 5 litres Nit bond SBR 45 to added to 50kg cement with 13 litre water addition finished surface to match with existing adjoining surface of ceiling, beams and alike complete all as specified and directed. |
| 25 | M&L and applying two or more coats of 2 component zinc based epoxy rust preventer (Nitozinc Primer-M) on corroded reinforcement after cleaning and removing the rust from corroded reinforcement with the help of wire brush and treating it with rust remover (Reebaklens RR) including thoroughly cleaning washing air blowing brushing etc complete all as specified and directed.Note : Qty of zinc based epoxy rust prevent or only shall be taken into account for payment purpose on the basis of actual consumption. |
| 26 | M&L for Glazed coloured ceramic tiles in vertical surface 300x600x7 mm thicklaid over and including 10 mm rendering in CM 1:3 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed. |
| 27 | M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. laid over and including 10 mm rendering or bedding layerin CM 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile Complete all as specified and directed. |
| 28 | M&L Vitrified tiles 8-10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed. |
| 29 | All as per ser item No 29 above but as in skirting/dado including cement mortar 1:4 10mm thick complete all as soecified and directed. |
| 30 | M&L for machine cut Green Marble 18-20 mm thick as in riser of steps, skirting, dado and pillar set over 10 mm rendering in CM 1:3 and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete all as specified by Engr-in-Charge. |
| 31 | M&L for 18-20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match withshade of granite laid over 15 mm screed bed or bedding layerin CM 1:3, including grinding of edges to curved surface finish, LPG gas pipe line hole complete all as specified and directed. |
| 32 | M&L for machine cut mirror polices 18 to 22 mm thick kota stone in single piece as in shelves and similar works laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbingishing including ball nosing of exposed edges complete all as specified and directed. |
| 33 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisturproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with three numbers stainless steel butt hinges on each shuttrs of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. |
| 34 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS hold fast/ugs/SS dash fasteners of required diaincluding necessary hold fast/lugs or SS dash fastnercomplete as per direction of Engineer-in-Charge. |
| 35 | S&F Aluminium windowsmade of 1.59 thick powder coated (thickness of powder coating not less than 50 micron) as per aluminium section of size given below. Aluminium window will be of double shutter ofglass/ wire gauge shuttersAluminium U channelincluding allnecessary accessoriesjointing cleats , glazing clips, rubber neoprene packing, for fixing glass/ wire gauge, aluminium handles and tower bolt 2 Nos 100 mm ‘D’ Type in each shutter, 3 Nos 100 mm aluminium hinges including necessary steel screws complete all as specified and directed by EngrThe size of different aluminium section to be used is as under (a) Outer Frame 125X25X1.59 mm thick (b)shutter frame section size 44X44X1.59mm thick for glass and 44x25x159mm for wire gauge |
| 36 | S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples to wooden/steel/aluminium frames with beading complete all as specified & directed. |
| 37 | S&F sheet glass, ordinary quality 4.80 mm thick fixed with rubber beading and clips size of glass n.exc 2 sqm in each pane complete all as spd & directed. |
| 38 | S&F frame work such as grills,gratring etc,with ends of bars shouldered &/or riveted or forged into spikes,framed guard bars, barred iron door ladder,frame balusters,walk ways, railing, ledger,frame work or water tanks & SImilar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 39 | S&F in repair vitreous china squatting pan of Orrisa pattern size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipe complete incluidng provision of lime concrete bedding as making goodincluding S/P trap and other necessay fitting complete all as spd & directed. |
| 40 | Supplyand fixing in repair PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked complete all as specified and directed. |
| 41 | S&F in repair 15mm dia bib tap cast coper alloy chromium plated fancy type crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed as fixed in repair complete all as specified and directed. |
| 42 | S&F in repair 15mm dia stop valve/angle valve of copper alloy fancy type chromium platedscrewed down high pressure with crutch or butter fly handle screwed on both ends for iron pipe or for union fixed in repair complete all as specified and directed. |
| 43 | S&F in repair swivel shower rose(fancy type) chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. |
| 44 | S&F in repair 600mmx450mx5mm thick looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood incl framing and fixed to wooden plugs with chromium plated screws & cup washers & fixedincluding taking down complete all as specified and directed. |
| 45 | S&Fin repair WHB flat back of SIze 580x450mm including Pillar tap cast coper alloy chromium plated fancy type,waste pipe, ss coupling, waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets including taking down complete all as specified and directed. |
| 46 | Taking down 15 mm bore steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge. |
| 47 | All as per Srl Item No 47.00 but for 20mm bore. |
| 48 | S&F 15 mm bore GI tubing medium grade with all fitting and fixing complete to wall/floor and ceiling etc forcomplete all as specified and directed by Engr-in-Charge |
| 49 | All as per srl item No 49.00 but for 20 MM bore |
| 50 | S&F in repairs sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and wastes, including fixing with cast iron cantilever brackets, bedding in cement mortar on to dwarf wall, connecting union to pipe, overall minimum size 915mm x 460 mm with bowl size 410mm x 330mm x160 mm including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink complete all as specified and directed. |
| 51 | S & F in repair gate valves 20mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 52 | Dismantling of water tanks of capacity exc 250 but n exc 500 ltrs & removing to storescomplete all as specified & directed. |
| 53 | S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top)vhoilsted and fixed in position all as specified in SSR Part-Icomplete all as specified & directed . |
| 54 | S& Fixing in repair ball valve brass high pressure with polythene floatand fly nut screwed on iron pipe ad fixed 20 mm bore of pipe complete all as specified and directed. |
| 55 | S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 56 | S&F in repair Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 57 | S&F in repair Floor Drainer with Collar and Cockroach Trap/Jali with or without waste hole all as specified and directed. |
| 58 | S&F in repair brass chromium plated soap dish, complete all as specified and directed. |
| 59 | S&F in repair brass chromium plated towel ring incl a pair of CP brass bracket complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F in repairs 15 mm bore fancy type long body bib tap, half turn, with wall flange, cast copper alloy with capstan heads, chromium plated, screwed for iron pipe or for brass ferrule, complete all as specified & as directed. |
| 61 | S&F in repair CP brass mixer for WHB/Sink/Wall hot & cold water for screwed down for iron pipe and fixed bore of pipe in 15 mmincluding taking down complete all as specified and directed. |
| 62 | Cutting Chases exe 10 cm but n exc 20cmin girth in brick/stone wall for fixing of PVC Pipe/GI pipe of 15 & 20mm bore (concealed in wall) including makink good surface in CM (1:6) & to match with the existing surfaces complete all as specified and directed. |
| 63 | S&F in repair PVC (SWR) pipes of 75 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed. |
| 64 | S&F in repair PVC (SWR) pipes of 110 mm nominal outside diameter (Type B with wall thickness 3.20 to 3.8 mm) single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed. |
| 65 | S&F in repair PVC (SWR) pipes of 75 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed. |
| 66 | S&F in repair PVC (SWR) pipes of 110 mm bore single socketed in any length fixed to wall i/c taking out old u/s PVC/CI pipe with fittings complete all as specified and directed. |
| 67 | S&F in repair PVC (SWR) floor trap, plain with grating including joining with solvent cement 75 mm dia complete all as specified and directed. |
| 68 | S&F in repair PVC (SWR) bend 75mm bore of any radius complete all as specified and directed. |
| 69 | S&F in repair PVC (SWR) bend 75mm bore of any radius with access door complete all as specified and directed. |
| 70 | S&F in repair PVC (SWR) bend 110 mm bore of any radius complete all as specified and directed. |
| 71 | S&F in repair PVC (SWR) bend 110 mm bore of any radius with access door complete all as specified and directed. |
| 72 | S&F in repair PVC(SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 110 mm bore with access door complete all as specified and directed. |
| 73 | S&F in repair PVC(SWR) branch piece single PVC (SWR) (Double T) equal or unequal of 110 mm bore with access door complete all as specified and directed. |
| 74 | S&F in repair PVC(SWR) branch piece single PVC (SWR) (Single T) equal or unequal of 75 mm bore with access door complete all as specified and directed. |
| 75 | S&F in repair PVC (SWR) vent cowl 110 mm complete all as specified and directed. |
| 76 | S&F for Pipe Supporting Clamping -for GI pipe 2 Nos for 15mm and 2 Nos for 20mmdown take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3\": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \"C\" Channel with ribs to be used of size 10\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3\" - 2 Nos. 2. Continuous Slotted C Channel of Size 10\" - 1 No.; 3. U Bolt R/M for 3\" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2\" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE. complete all as specified and directed |
| 77 | S&F for Pipe Supporting Clamping - Single Pipe of dia 3\" (75 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3\": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \"C\" Channel with ribs to be used of size 10\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 3\" - 2 Nos. 2. Continuous Slotted C Channel of Size 10\" - 1 No.; 3. U Bolt R/M for 3\" (75 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2\" Zn coated - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102. Make: Shaivi or equivalent as approved by GE. complete all as specified and directed |
| 78 | S & F for Pipe Supporting Clamping - Single Pipe of dia 4\" (110 mm) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt R/M System running vertically with wall distance 3\": Pipe Support Clamping made of 1. Profile Bracket having Wall Distance 3\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) Steel (IS 1079 DD); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted \"C\" Channel with ribs to be used of size 10\" made of Low Carbon Hot Roll Gauge Corrected (HRGC) steel (IS 1079 DD) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to EN 10204 3.1.Material Qty. for one unit : 1. Profile Bracket Wall distance 3\" - 2 Nos. 2. Continuous Slotted C Channel of Size 10\" - 1 No.; 3. U Bolt R/M for 4\" (110 mm) CI or PVC Pipe Dia. - 1 No.; and 4. Justi Khilla 2 1/2\" Zn coated - 4 nos.Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in the Technical Drawing No. : CE Jaipur Zone - Jaipur; TD/2022/102.Make: Shaivi or equivalent as approved by GE. |
| 79 | Demolition and breaking up drain pipes (Salt glazed stone ware, AC or Reinforced concrete) or 100mm dia set in cement mortar including PCC bed to drain pipe, packing under & haunching against the sides of drain pipes all as specified & directed by Engineer-in-charge. |
| 80 | S&F for 75mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard, minimum load bearing capacity 5 ton/sqm, in square, rectangular or circular shape complete all as specified & as directed. |
| 81 | M&L 150mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars including demolition and breaking up old existing pipe all as specified & as directed. |
| 82 | M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone agg) as bed to drain pipe including in packing under and haunching against sides of pipes after they are laid and tested in complete all as specified for 100mm dia pipes complete all as specified and directed. |
| 83 | M&L for cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 100mm bore pipe complete all as specified and directed. |
| 84 | S&F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) 300mm longnot less than 12mm dia with and incl minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed complete all as specified and directed. |
| 85 | S&F Aluminum anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed. |
| 86 | S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked complete all as specified and directed. |
| 87 | S&F SS barel tower bolt 200mm long stove enamelled black with bright bolt & fixed complete all as specified and directed. |
| 88 | S&F SS handle of 150mm size oval type stove enamelled blackall as specified complete all as specified and directed. |
| 89 | S&F in MS Retractable Hinge fixed to wooden or steel frames with Screws/welding as required at site complete all as specified and directed. |
| 90 | S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,with vulcanised rubber piece.fixed in floor complete all as specified and directed. |
| 91 | S& F in repair stainless steel plate rack out of 1.00 mm thick sheet of size 900 x 750 mm and depth of shelves 230 mm with partition for small /large plates made out of stainless steel 24 gauge all as per sampleto be hanged on wall by the help of steel screws grouted in walls with rawl plug design as approved by GE/Kept in GE Office |
| 92 | M&L for pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet,12mmdia M S rod for locking , two nos chromium plated handle and one mortise pattern lock inclu two coats of spary painting over a coat of shop primer as godrage pattern complete all as shown on drg no TD/2004/29 sheet no 1/3 to 3/3 |
| 93 | S&F in repairs Stainless Steel drapery rod of 25 mm inner dia (in length as directed ) of approved colour with & including matching finials at both ends and pair of SS brackets fixed at both ends with PVC rawl plug & steel screws on walls/beams including PVC curtain rings of matching colour @10 cm c/c including taking downall as specified and directed |
| 94 | M&L for TMT bars 10mm dia and over cut to length to shape required including cranking, bending spirally or hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 95 | Excavating in trenches n exc 1.50m in width and n exc 1.50m in depth for foundation, manholes etc as well as n exc 10 sqmm on plan area and getting out in soft/loose soil all as specified and directed. |
| 96 | Excavation in over areas n exc 1.50m in depth and getting out in soft / loose soil complete all as pecified & directed. |
| 97 | All as per srl item No 96.00 but depth exc 1.50 m but n. exc 3m |
| 98 | Allas per srl item No 96.00 but depth exc 3 m but n. exc 4.5 m |
| 99 | All as per srl item No 96.00 but exc 4.50m and n exc 6.00m depth. |
| 100 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc 25 cm thick in soft/loose soil complete all as specified and directed. |
| 101 | Removing excavated soil to a distance exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 102 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan to any radius, built in 1:4 as in half brick thick wall complete all as specified and directed. |
| 103 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exceeding 6 mean radius, built in CM 1:6 complete all as specified and directed. |
| 104 | M&L for framed work as in doors or gates or tank cage, angle or other covering door etc to be prepared for handing or sliding with including either hooks and hinges or steel hanging door fittings and including all necessary nuts and bolts and welding reqd and hanging also fastening and fixing complete conforming to FE-290 Gde E-165. |
| 105 | S&F welded steel wire febric n exc 4kg/Sqm complete to wood or steel membrane complete all as specified and directed. |
| 106 | M&L precast cement concrete blocks as in kneelers, apex stones, bed plates, bed blocks, kerb stone in PCC (1:2:4) type B-1 mix ujsing 20 mm graded stone aggregate and set in cement mortar 1:6 all as specified and as directed. |
| 107 | M&L for Vibrator moulded (Coloured) precast concrete interlockingpaver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade laid over 25mm thick sand cushionand filled the joints with dry sand after laying the paver block complete all as specified and directed. |
| 108 | Treatement for sunken portion is as follows :-(i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.(ii) M&L for providing 12 mm dia holes of 40mm deep @2.00m c/c at junction of beams and columns as co-ordinal points for inserting/pouring cement slurry by pressure grouting for sunken floors of toilet , includind sealing the holes with CM 1:3, all as specified and as directed by Engineer - in - Charge.(iii) M&L for water proofing plaster for sunken portionin CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (WPC will be included in quated rate).(iv) M&L for applyin evenlytwo coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces.(v) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc.(vi) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick.on top (vii) M&L for plastering in CM 1:4, 15 mm thickwith water proofing compound at the rate of 2% by weight of cement and finishing the surface seven and fair.Note :- Above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated.(c) Horizontalflat area to be measered.(WPC will be included in quated rate ony and not paid extra.) |
| 109 | S&F for preparation of new steel surface/old untreated of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 110 | M&L for preparing newly plastered surfaces & applying two coats of oil emulsion distempering(OBD) over and including a coat of white wallcare putty 2 mm thick over a coat of primer on walls complete all as specified and directed. |
| 111 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc using grinding machine on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper ( OBD) of approved shed/tint over and including a coat of white wall care putty2 mm thick complete.over a coat of primer complete all as specified and directed. |
| 112 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efforsecent salt, trading oil grees spots etc on wall surfaces and preparation of old plastered wall surfaces and applying two coats of oil emulsion distemper (OBD) of approved shed/tint over a coat of 2mm thick wall care putty complete all as specified and directed. |
| 113 | M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling complete all as specified and directed. |
| 114 | M&L for preparation of old surrfacesand applying two coats of white wash on ceiling complete all as specified and directed. |
| 115 | M&Lpreparing newly plastered surfaces of walls and applying two coats of exterior emulsion paint over a coat of 2mm thick exterior wall care putty on walls complete all as specified and directed.Note:- Wall care putty shall be paid for separately under respective item. |
| 116 | M&L for preparing newly pastered surfaces of walls, plastered and applying 2mm thick exterior wall care putty on walls to prepare the surface even and smooth complete all as specified and directed. |
| 117 | M & L for writing letters or figures (Block, Roman, Itslic or Indian) n. exc 30 cm height with thick synthetic enamel paint. complete all as specified and as directed by Engr- in - Charge. |
| 118 | M&L for form work to soffits of suspended slabs such as roof slabs etc for rough finished concrete surface complete all as specified and directed. |
| 119 | M&L for form work to SIdes for slabs and SIdes of RCC/PCC bands in walls, horizontal or sloping and SImilar work exc 10 cm but n exc 20 cm wide for fair finished concrete surface complete all as specified and directed. |
| 120 | M&L for RCC 1:2:4 type B-1 (Nominal mix) using 20mm graded crushed stone aggregate as in roof, floor, slabs supported on walls complete all as specified and directed. |
| 121 | S & F factory made kitchen cabinet of size 1.5m x 0.60m x 0.30m made out of 18mm thick PVC celuka sheet having density not less than 650kg/cum one side decorative lamination & other side balancing lamination sheet consisiting of carcase 18mm thick PVC sheet incl shutters made out of 18mm thick PVC board all required brackets 5.5 screwes etc. The panels shall be fabricated using adhesive and screws where every required. All edge shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as per drawing and specification approved by Engineer in charge. Note : (i) PVC celuka sheet manufactured by ISO 9001-2015 certified company, termite proof, water prrof & flame retradat PVC Sheet. (ii) PVC caninet of required size fabricated by joining four 18mm thick PVC celuka ply fixed with each other using solvent cement adhesive and screws and 18mm thick PVC sheet as backing of cabinet screw and solvent cement adhesive etc (iii) The cabinet box will be devided into two ewual part with two leaf shutter and one shelf will be placed in caninate (iv) Caniate will be fixed in wall with 4 x fastners etc and necessary fixing lugs (v) Each shutter will be provided with SS handle of 75mm, CP Piano hinges, magnet/catcher (vi) The quouted rates are incl the ratwes of all fifftings and fixture and ismantling and taking down old kitchen cabinet of any type complete all as specified and directed. |
| 122 | S&Fpre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws as specification including dismentling complete all as specified and directed by Engr In Charge. |
| 123 | M&L for preparing surfaces of old plaster on walls and applying exteriortwo or more coats of APEX/WEATHER over 3mm putty including priming coat of exterior primer applied up to forth stories building height complete all as specified and directed. |
| 124 | Supplying and fixing in repair factory made PVC shutter of 18 mmthickness consisting of panel of 18 mmthick celluca ply of density 600 Kg.cbm density with prelaminated sheet on one sidecut in desired size of shutter and fixed with frame as in cabinet boxes with shelf and shutter full size fitted above the kitchen cooking platform and/or other platform including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc including dismantling boarding, any description, fixed in any position with nailscomplete all as specified and directed.Note : Items like cupboard knobs, stainless steel channel, CP plate clip hinges are included in the mentioned rates and as per manufacturesrs specification and drawing.The measured area shall be front elevation. |
| 125 | M&L boring holes in soft/loose soilfor incasing GI Tubing 300 mm pipe etc completeall as as specified and directed |
| 126 | S&F 150 mm GI slotted pipe with 3.16mm slot size pipe for inserting in hole etc completeall as as specified and directed |
| 127 | Hardcore of guage exc 63mm but n exc. 100 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 128 | Rendering 10 mm thick on brick wall/concrete surfair face concrete surfaces in cement mortar (1:4) complete all as specified and directed. |
| 129 | S&F for GIpipe cap of 150 mm bore completeall as as specified and directed |
| 130 | M&L loose filling with Gravel of size 3.0 to 6.0mm to be filled around slotted pipe complete complete all as as specified and directed |
| 131 | M&L for gravel bed for loose filling of size 6.0 to 9.0mm complete all as as specified and directed |
| 132 | M&L for gravel bed for loose filling of size 3.0 to 4.0mm complete all as as specified and directed |
| 133 | M&L for gravel bed for loose filling of size 1.0 to 2.0mm complete all as as specified and directed |
| 134 | M&L Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed. |
| 135 | M&L for 100mm thick PCC 1:3:6 type C-2, using 40mm graded stone aggregate as in flooring and finished fair and even complete all as specified and directed. |
| 136 | M&L for providing cement concrete 1:2:4 type B-2 concrete, using 40mm graded stone aggregate as in water throughs, surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed. |
| 137 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitred/stopped, end etc complete all as specified and directed. |
| 138 | M&L for brick work with fly ash brick modular bricks straight or curved on plan exc 6M mean radius, built in CM 1:6 complete all as specified and directed. |
| 139 | Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduitand making good disturbed surfacesof walls/ceilings /floors etc incl dismentling of fittings complete all as pecified & directed. |
| 140 | M&L for concealed Point wiring with two single core PVC insulate, unsheathed multistranded copper conductorcable of size 1.5 sq.mm (FRLS) drawn in and including electrical grade PVC conduit 20 mm dia concealed on wall/ceiling/floorincluding PVC insulated unsheathed earth wire with multi stranded copper conductor of size 1.5 sq.mm(FRLS) including MS shunk sheet metal box with modular sheet top cover of required module with frame for mounting switches, sockets etc complete all as pecified & directed. Note -(a) Quoted rates shall be deemed to include the cost of Cutting Chases in Stone/Brick wall and making good to the disturbed surfaces including plastering andpaintingto match with the existing colour. (b) The rates Quoted by the contractor shall be deemed to include the cost of modular cover plates of required module with frame, cost of Sheet Metal Box and no additional payment shall be made on account of the same. |
| 141 | All as per srl item No 140.00 but for one fan point controlled by one switch and regulator |
| 142 | All as per srl item No 140.00 but for for one exhaust fan point/Fresh Air Fan Point controlled by one switch . |
| 143 | All as per srl item No 140.00 but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board. |
| 144 | All as per srl item No 140.00 but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board. |
| 145 | All as per srl item No 140.00 but for one bell/buzzerpoint controlled by one bell push |
| 146 | All as per srl item No 140.00 but for one lightpoint controlled two ,two way switches |
| 147 | All as per srl item No 140.00 but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade as continuous earth wire in green colour complete all as pecified & directed. |
| 148 | All as per srl item No 140.00 but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 4.0 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade including 4.0 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLSH cable 1100 Volt grade as continuous earth wire in green colour complete all as pecified & directed. |
| 149 | S&F bell/buzzer AC 230 volts single pole complete all as specified & directed. |
| 150 | Supply and fixing Modular switch, one way 6 Amp, 1 module, piano type, 230/250 volts grade on top covers (catered in point wiring above) complete all as specified and directed. |
| 151 | All as per srl item No 150.00 but for Modular switch, two way 6 Amp, 1 module |
| 152 | All as per srl item No 150.00 but for Modular switch, one way 16 Amp, 1 module |
| 153 | All as per srl item No 150.00 but for Modular bell push 6 Amp, 1 module |
| 154 | Supply and fix Modular socket outlet 2in1, 3pin 5A, 2 module, multipurpose use, flush mounting type, 230/250 Volts grade on Top covers (catered in point wiring above) complete all as specified and directed. |
| 155 | All as per srl item No 154.00 but for Modular socket outlet 2in1, 3 pin 15 Amps flush type |
| 156 | Supply and fixing Modular ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as pecified & directed. |
| 157 | Supply and fix in repair LED batten (1.2m) made of CRCA sheet housing with a PC glossy diffisure duly prewired connection having nominal system lumen output of 2000 lumens at a minimum system efficiency of 115 lumen per watt and total power consumption not more than 20 watt including driver. it should have rated system life time of 40000 burning hours at L70 and should have a temperature of 6500 K CRI >80, thd <10 and PF>0.95 complete all as specified and directed make - Crompton Cat Part CIS-305-40-57-SL-DP-NWH, Philips Cat part BN308C LED20S-6500 L120 PSU WH, Havells Cat Part STOUTPLUS600BS20WLED840SPCWH |
| 158 | Supply and fixing in repair lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 159 | Supply and Fixing in repair 20 watt emergency LED inverter bulb B-22 capacity with inbuilt powerful lithium battery backup of atleast 4 hours and having minimum two years warranty. The lighting shall have deep discharge protection, fast charging, offering cool day light for atleast four hours in off hours complete all as specified and directed. Make : - Havells/Philips/Bajaj |
| 160 | Supply and fixing in repair sheet metal enclosuresdouble door type suitable for fixing MCB\"s, SPN with 200 Amps rated bus bar,8 way, 240 Volts complete all as specified and directed. |
| 161 | S & F in repair MCB 32/40 Amp, single pole & neutral, 240 Volt complete all as pecified & directed. |
| 162 | S & F in repair MCB 6-40 Amp, single pole240 Volt complete all as pecified & directed. |
| 163 | Supply and fixing in repair vertical sheet metalenclosures double door type , suitable for fixing MCB,TPN with 200 amps rated bus bar, 4 way. 415 Volts with inbuilt MCCB 4 pole 63 Amp,16 KA complete all as specified and directed. |
| 164 | S&F sub main wiring on and includingpassing through PVC conduit in concealed (including cutting chasis in stone/brick wall) 1100 Volts grade with PVC flexible cable copper conductor cablefire resistant low smoke and halogen (FRLSH) unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductorunsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing U/S sub main wiring. (Note:Two runs of cable with one run of earth wire and one run of PVC Coundit shouldmeasured as one length) |
| 165 | Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc including taking down of existing complete all as specified &directed.Note : - Quoted rate shall be deemed to include for earth wire with protection pipe up to 7.5 meter length. |
| 166 | M&L for GI pipe (Light grade) for protection of LT cable fixed to walls/ poles/road crossing including clamps complete of 40 mm bore in repair complete all as specified and directed. |
| 167 | Supply and fixing in repair 25 mm bore GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittingslaid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion as existing and including taking down of old unserviciable pipe of the following sizes :- |
| 168 | All as per srl item No 167.00 but for 15 mm Bore |
| 169 | M & L for Gun-metal, globe or gate valves, 25 mm bore of pipe with iron wheel head, screwed both ends with GI Union for iron pipe and fixed in repair complete all as specified and directed. |
| 170 | Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc including taking down of existing cable complete all as specified & directed.Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. |
| 171 | M/L for brick work with FLY ASH BRICKS (As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS)laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed. |
| 172 | M&L for dry sand and punning for cushioning to under ground cable all as directed.Note :- For the purpose of payment only punned thickness shall be measured. |
| 173 | Supply & install, testing and commissioning of factory made,CPRI approved factory made LT panel outdoor KIOSK type with double doors of suitable size provided with locking arrangements dust, weather and vermin proof 1100 volt grade, 50 Hz AC made out by 3.15 mm thick CRCA sheet steel, fully compartmentalised, with IP-65 protection all as per conforming to IS: 2417 of 1962 complete with and 50x50x5 mm thick angle iron for frame and legs, 04 Nos. legs 750 mm long 450 mm grouted in PCC blocks of type B-1 (1:2:4) with 300 mm ground clearance,for 415 volts, 3 phase, 4 wire AC supply including taking down of existing complete all as directed with and including the following :- Distribution Panels under Stair Cases of OR Blocks 4 Qtr(a) MCCB 4 pole 415 Volt, 100 Amps ,Adjustable thermal and magnetic release rupture capacity 25 KA - 01 No (incoming)(b) MCB 230 Volt, 40 Amps SPN-6 Nos (Outgoing). The Panel should be well equiped with separate compartments of size 300 mm x 300 mm- 6 Nos with separate door for each compartment for mounting Smart Energy Meters along with these MCB\"s. The rates quoted by the contractor shall be deemed to include the cost of ixing the existing energy meters in these compartments and making necessary electrical connections.(c) Digital Voltmeter 96 sqmm 0 - 500V with selector switch - 01 No(d) Digital Ammeter 96 sqmm 0 - 200 Amp with CTs and selector switch - 01 No(e) Aluminium strip bus bars with colour code PVC insulation 150 Amps capacity - 01 Set(f) Indicators RYB - 01 Set(g) Earthing terminals and cable glands.(h) Internal wiring of panel board with solid coductor copper cable single core of sutable size and incl 03 Nos bakelite control fuses.(j) Danger notice plate for LT with conventional skull and bones duly rivetted/pasted to the panel board door. |
| 174 | Disconnecting form elect connection andtaking down carefully the existingCeiling fan/Exhaust fan/Geyserof any capacity, any make,any size and depositing the same Ceiling fan/Exhaust fan/Geyser inAGE E/M store yard all as specified and directed by the Engineer-in-Charge.Refixing the same Ceiling fan/Exhaust fan/Geyser carefully including necessary repair work for making functional the same and making electric connections complete all as specified and as directed. Note : Rates quoted by the contractor shall be deemed to include the cost of minor repair work of Ceiling Fan, Exhaust Fan and Geyser like replacement of Capacitor, bearing, fan rod etc in case of Ceiling Fan/Exhaust Fan if found unserviceable and replacement of thermostatein case of Geyser etc. |
| 175 | Disconnecting form elect connection andtaking down carefully the existingelectric energy meter of any capacity, any make,any size and depositing the same electric energy meter inAGE E/M store yard all as specified and directed by the Engineer-in-Charge.Refixing the same inside the LT Panel Box with Meter Compartments carefully incl necessary electric connections complete all as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
