|
| 1 | Excavating in post holes( or similar holes) each n exc 0.5 cu.m. getting out, returning,filling in and ramming earth of broken rubble mixed with earth around , in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed. |
| 2 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410-W (Gde E- 250) quality A ) complete all as specified and directed. |
| 3 | S&F hollow section for posts, purlin, rafter, truss including all necessary drilling , bolting or rivetting or welding and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 4 | M&Lfor plain cement concrete in post hole Type C2 1:3:6 ( 40 mm graded aggregate) complete all as specified and directed. |
| 5 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 6 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 7 | S & F MSjoist channel , angle or Tee section MS tubes, flats square bars etcfixed indepently or framed or without connecting plates, (cut to ordinary lengths i.e. within 20mm of the length indicated) for any type framing, cladding, gauzing, glazing including purlins and rafters etc complete all as specified and directed.(Fe 410-W Gde E-250 Quality A) |
| 8 | S&F for Expanded metal in available size weightnot exc. 4.00 kg per Sqm complete all as specified and directed. |
| 9 | M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 10 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand andcutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 11 | S&F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed. |
