|
| 1 | Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed. |
| 2 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 4 | Demolition of brick work, PCC block masonary, stone masonry or boulder masonary built in cement mortar, complete all as specified and as directed. |
| 5 | M&L for walling of random rubble masonry uncoursed, well bonded , bedded and solidly hearted built in CM (1:4), complete all as specified and as directed. |
| 6 | M&L for extra over walling hammer dressing with mix depositing on face from straight edge held against the dressed surface n. exc 40mm dpression granite or trap stone, complete all as specified and as directed. |
| 7 | M&LforCement concrete 1:2:4 type B-1 (using 20 mm graded agg) as in coping including form work, complete all as specified and as directed. |
| 8 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 finished surfaces even and smooth without using extra cementwith water proofing compound complete all as specified and directedNote : WPC shall be measured and paid separately. |
| 9 | Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 10 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness(below & above GL) unreinforced, complete all as specified and as directed. |
| 11 | M&L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. |
| 12 | M&L for 75mm thick cement concrete Type C2 1:3:6 (using 40 mm gradedaggregate)as in sub floors, sub bases, floors and pavings etc, complete all as specified and as directed. |
| 13 | M&L for Factory made precast coloured cement concrete interlocking tiles 60 mm thick of size and shape as directed, strength not less than that of M-35 grade concrete laid and jointed, complete all as specified and as directed. |
| 14 | M & L for 30 mm thick sand filling under floors or in foundations including watering and consolidation, complete all as specified and as directed. |
| 15 | M & L for cast-in-situ providing cement concrete 1:2:4 Type B-1 (using 20 mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and as directed. |
| 16 | Dismantlingtimber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and as directed. |
| 17 | Dismantlingtimber scantling under 40 sq cmin section in any position as in unframed/framed work, complete all as specified and as directed. |
| 18 | M & L 2nd Class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified and as directed. |
| 19 | M&L 2nd class soft wood 20 mm thick in facia/eaves boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed. |
| 20 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 13 sqcm but not exc 25 sqcm in section, complete all as specified and as directed. |
| 21 | S&F plain fillets, square, rectangular or triangular in section using second class soft wood clean swan secured with nails exc 6 sqcm but not exc 13 sqcm in section, complete all as specified and as directed. |
| 22 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 23 | S & F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on Ceiling, complete all as specified and as directed. |
| 24 | S & F 6 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on wall, complete all as specified and as directed. |
| 25 | M&L2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified and as directed. |
| 26 | M&L Wooden Flooring boarding, clean sawn, plain, 30mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps Planed one side, with butt joints and fixed with nails supplied and fixed, complete all as specified and as directed. |
| 27 | All as per above here-in-before but except boarding, complete all as specified and as directed. |
| 28 | Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit, complete all as specified and as directed. |
| 29 | All as per above item here in before but n exc 1.5 Sqm each, complete all as specified and as directed. |
| 30 | Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each, complete all as specified and as directed. |
| 31 | Taking down shutters of any description n.exc 1.00 Sqm each, complete all as specified and as directed. |
| 32 | S&F second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. |
| 33 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats,complete all as specified and as directed. |
| 34 | S&F Glazed and skeleton shutters thickness 30 mm, second class softwood, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section specified 8 clause 8.24(b), complete all as specified and as directed. |
| 35 | S&F 150mm Extruded brass handles, fabricated type polished, complete all as specified and as directed. |
| 36 | S&F Butt hinges,100mm medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed. |
| 37 | S&F Aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 38 | Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads, complete all as specified and as directed. |
| 39 | S&F Sheet glass 5 mm thick ordinary quality one way glazing with rubber gasket in square not exc 0.5 sqm each pane, complete all as specified and as directed. |
| 40 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows, complete all as specified and as directed. |
| 41 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed. |
| 42 | M&L preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer, complete all as specified and as directed. |
| 43 | M&L preparation of old painted surface of wood and wood based surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamal paint, complete all as specified and as directed. |
| 44 | S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in positionon roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type,disposal of rubbish, complete all as specified and as directed. |
| 45 | S & F in repairs 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 46 | S&F in repair Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 47 | S&Fin repairs for 15 mmbore bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed. |
| 48 | S&F in repairs vitreous Counter top wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed. |
| 49 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup, complete all as specified and as directed. |
| 50 | S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mmfixed to GI tubing, complete all as specified and as directed. |
| 51 | S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed. |
| 52 | S & F in repairs Brass CP wall mixer /WHB Mixer15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.WHB |
| 53 | Taking up or down 15mm bore steel water tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 54 | S&F 15mm bore steel water tube, \"mediumgrade\" galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 55 | S&F stainless steel curtain rods of selective quality designed and colour shall be as directed by Engr-in-Charge, complete all as specified and as directed. |
| 56 | Supply and fixed 2nd class hard wood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and as directed. |
| 57 | S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed,complete all as specified and as directed. |
| 58 | Taking down carefully copper/aluminium point wiring (light, Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors etc. |
| 59 | M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceilingallaccessories such as bends, elbow, reducers , junction boxes /MS boxesduly painted /PVC boxfactory made rectangular in shapeas requiredwith top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :-Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is. |
| 60 | (a) One light/fan point/Exhaust fan point controlled by one 5 Amps switch one way. |
| 61 | (b)One 3 pin 5 Amp switch socket combination 5 Amps switch socket oulet on independent board. |
| 62 | (c) One 3 pin 3 Amp switch socket outlet on same board with accessories. |
| 63 | M&L Point wiring complete with FRLS 1100 Volts grade, 4 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked conduit conceled in wall/ceilingallaccessories such as bends, elbow, reducers , junction boxes /MS boxesduly painted /PVC boxfactory made ractangular in shapeas requiredwith top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 4 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :-Note: Contractor must do internal wiring with cheasel cutting in wall/ceiling and fixed conduit and repair surface with plaster 15MM in wall/ceiling and make surface good as it is. |
| 64 | S&F switch piano Flush type, single pole, one way 6 amp 240, complete all as specified and as directed. |
| 65 | S&F switch piano Flush type, single pole, 15 amp 240, complete all as specified and as directed. |
| 66 | S&F Socket oulet 2 in 1, 3 pin,5 Amps, flush type, complete with gang box, complete all as specified and as directed. |
| 67 | S&F Socket oulet 2 in 1, 3 pin,5and 15 Amps, flush type, complete with gang box, complete all as specified and as directed. |
| 68 | S&F ceiling rose 3 terminal/PVC/ Polycarbonate, isloated body, complete all as specified and as directed. |
| 69 | S&F in repairs Distribution board, SPN 12 Way, Double door complete all as specified and as directed. |
| 70 | S&F in repairs MCB, DP 40 Amps 240 Volts B curve, complete all as specified and as directed. |
| 71 | S&F MCB Single pole 6-32A Amps 240 Volts B Curve, complete all as specified and directed. |
| 72 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 73 | Supply and fixing LED luminaire round shape 12 watt,220 volts AC recessedtype with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 74 | S&F LED bulb 12 W, 220V suitable size from ceiling rose, complete all as specified and as directed. |
| 75 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. |
| 76 | S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm,complete all as specfied and as directed. |
| 77 | S&F Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. |
| 78 | M&L in repairs for Earthing complete with galvanizedsteel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc |
| 79 | S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling, complete as specified and as directed. Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable. |
| 80 | Note:- Schedule of credit Rs 1,22,721.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. |
