|
| 1 | Item No.1:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Addn.Spec. No.Bd.A.1 Page One Number 259 (SSR 22-23 It.No.21.02) |
| 2 | Item No.2:-Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Additional Spec.No.Bd.A.2 Page One Number 259 (SSR 22-23 It.No. 21.06) |
| 3 | Item No.3:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.21.40) |
| 4 | Item No.4:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec.No.Bd. E. 1 Page One Number 287 (SSR 22-23 It.No.24.01 ) |
| 5 | Item No.5:-Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.3 Page One Number 298 and B.7, Page One Number38 (SSR 22-23 It.No.25.11) |
| 6 | Item No.6:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.5 Page One Number 300 and B.7, Page.One Number 38 (SSR 22-23 It.No.25.31 ) |
| 7 | Item No.7:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.6 Page One Number 300 and B.7, Page One Number38 (SSR 22-23 It.No.25.50 ) |
| 8 | Item No.8:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Additional Spec. No.Bd.G. 1 PageOne Number 313 (SSR 22-23 It.No.27.01 ) |
| 9 | Item No.9:-Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.9 Page One Number 303 and B.7, Page One Number38 (SSR 22-23 It.No.26.05 ) |
| 10 | Item No.10:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.8 Page One Number 302 and B.7, Page One Number38 (SSR 22-23 It.No.25.70) |
| 11 | Item No.11:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Additional Spec.No. Bd.F.17, Page One Number 306 (SSR 22-23 It.No.26.33 ) |
| 12 | Item No.12:-Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. Additional Spec. No.Bd.A.10 Page One Number 262 (SSR 22-23 It.No.21.36) |
| 13 | Item No.13:-Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Additional Spec.No.Bd.A.11 Page One Number 263 ( sSR 22-23 It.No.21.37 ) |
| 14 | Item No.14:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete Additional Spec.No. Bd.G.5 Page One Number 315 (SSR 22-23 It.No.27.05 ) |
| 15 | Item No.15:-Providing and fixing steel window C.R.C. sheet as per I.S. 1513 : 1986. gauge sect. 65 x 40 x 25 mm shutter single sheet of 24 gauge single leaf joined by fusion welding at appropriate points with vertical grooves of 15 mm wide and 15 mm deep at a distance of 45 mm. The first and last rib should be 60 mm away from vertical edge of the shutter. the shutter shall be welded, with angle to from the periphery of the shutter. At the center of the frame there shall be angle welded to bifurcate the frame into segments with two leaf shutter square 12 mm square guard bars at 120 mm centerwith all accessories Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.39.21 ) |
| 16 | Item No.16:-Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc Additional Spec.No.As directed by Engineer in charge. (SSR 22-23 It.No.39.31 ) |
| 17 | Item No.17:-Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.32.34 ) |
| 18 | Item No.18:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Additional Spec.No.Bd. L.2 Page One Number 368 (SSR 22-23 It.No.32.03 ) |
| 19 | Item No.19:-Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete Additional Spec. No.Bd.L.4 Page One Number 368 (SSR 22-23 It.No.32.06 ) |
| 20 | Item No.20:-Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. Additional Spec. No.Bd. L.10, Page One Number370 (SSR 22-23 It.No.32.15 ) |
| 21 | Item No.21:-Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Additional Spec. No.Bd.M.3 Page One Number 380 (SSR 22-23 It.No.33.05 ) |
| 22 | Item No.22:-Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. Additional Spec. No.Bd.P.6 Page One Number 414 (SSR 22-23 It.No.36.12 ) |
| 23 | Item No.23:-Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.35.26 ) |
| 24 | Item No.24:-Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge (SSR 22-23 It.No.6.36) |
| 25 | Item No.25:- Charges for testing of material in vigilance and quality control laboratory for concrete compressive strength of C.C. Cube (Set of 3 cubes) Rate as per SSR 23-24 Sr.No.19 Page No.3 |
| 26 | Item No.26: Charges for testing of material in vigilance and quality control laboratory for BRICKS Water Absorption ( Set of 5 Bricks), Compressive strength ( Set of 5 Bricks), Efflorescence ( Set of 5 Bricks), Rate as per SSR 23-24 Sr.No.13 Page No.2 |
| 27 | Item No.27: Charges for testing of material in vigilance and quality control laboratory for Metal (Sieve Analysis) Rate as per SSR 23-24 Sr.No.3 Page No.2 |
| 28 | Item No.28: Royalty charges b) For All Other Minerals except Natural Sand= Royalty + surcharge (2%) \ 211.95+4.23 = 216.18 per cum. As per SSR 22-23 Section V Page No.3 Please Enable Macros to View BoQ information |
