|
| 1 | Note :- (i) Work to be carried out on GL to 8th floor (incluing terrace of building) from ground level. (ii) Rate for Scaffolding and Safety System for labour are included in quoted raes by Contractor. (iii) Safety Net and Water Proofing covering materials shall be arrange by Contractor while working at Site and it will be deem fit in quoted rats by Contractor.M&L for fly ash Brickwork with subclass ‘B’ bricks, old size bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete as specified as directed. |
| 2 | M&L forrendering 10mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even smooth without using extra cement complete as specified as directed. |
| 3 | M&L forrendering 15mm thick on fair faces of brick work or concrete urfaces in CM 1:4 mixed with water proofing compoundfinished even smooth without using extra cement complete as specified as directed. Note : Water proofing compound shall be measured seprately. |
| 4 | Supply only Integral water proofing compound |
| 5 | M&L for PCC 1:4:8 type D-2, 75mm thick using (40mm graded) as sub base complete as specified as directed. |
| 6 | S&F of Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thickof any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 7 | S&F for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 8 | M&L for Preparation of new steel surface of any description over 10 cm width or girth and applyin two coat of synthetic enamel paint overone coat of red oxide complete all as specified and directed. |
| 9 | S&F 10mm thick toughened glass plain or tinted, as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.complete all fittings such ashinges,handles, floor spring etc all complete all as specified and directed. |
| 10 | M&L for Providing and fixing 10mm thick plaster of paris ceiling Gypsumanhydrous) for any sunk or raised mould surface over 2ndclass soft wood fillets, or metal frame work and reinforced with G.I. wiremesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete as specified as directed. |
| 11 | M&L for Providing and fixing Gypsum B oard 12mm thick in ceiling fixed with screw as per manufacturers complete as specified as directed. |
| 12 | M & L Plain fillets, square, rectangular in section exc 13 Sqcm but n.exc25 Sqcm clean sawn secured with nails in Ilnd class soft wood complete as specified as directed. |
| 13 | M&L preparation of new plasteredceilling surface and applying two coats oil bound distemper over a coat ofalkaline resistent primer over and includinga coat of 3mm thick wall care putty to the surface complete as specified as directed. |
| 14 | M&L Vitrified coloured tiles 8-10mm thick any shade (Square/Rectangular) area of each tiles exc 0.42 sqm but not exc 1.00 sqm over and including 15mm thick screed bed in Cement mortar (1:6) in flooring, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed directed. |
| 15 | M&L Vitrified coloured tiles 8-10mm thick any shade (Square/Rectangular) double charged area of each tiles exc 0.42 sqm but not exc 1.00 sqm, as in skirting/dado, over and including 10mm thick screed bed in Cement mortar (1:4) in flooring, set and jointed in neat cement slurry and pointed in cloured cement to match complete all as specified and directed. |
| 16 | M&L for Non-skid ceramic coloured tiles 7-8mm thick (square/rectangular), area of each tile not exc 0.11 Sqm, over and including 15mm thick screed bed in CM (1:6)in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 17 | M&L for Glazed ceramic coloured joint free tiles 450x300x7mm in vertical surfaces over and including 10mm thick rendering in Cement mortar (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 18 | S&F 605mm x 605mm GI frame work for seamlesscelling snap grid frame work for false ceilling with all necessary angle & Tee arrangement with and incl fixing cleats screw etc complete as specified as directed. |
| 19 | S&F hanger 6mm dia GI (upto 1200 mm length) adjusting level fixed to roof by means of celling complete as specified as directed. |
| 20 | S&F False celling 8mm thick (Non asbestos fibre cement building board) fixed in celling flat or sloping inserted in GI/aluminium frame work complete as specified as directed. (Make-Armstrong, Saint Gobain) |
| 21 | S&F in repair prelaminated, particle board 18/19mm thick exteriorgrade prelaminated one side with decorative choice lamination fixed with nails timber frame work complete as specified as directed. |
| 22 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as specified as directed. |
| 23 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part-I |
| 24 | S&F aluminium anodised tower bolt of extruded sectionof length 150mm and fixed complete all as specified and directed. |
| 25 | S&F aluminium anodised tower bolt of extruded sectionof length 100mm and fixed complete all as specified and directed. |
| 26 | S&F aluminium anodised handle of length 150mm and fixed complete all as specified and directed. |
| 27 | S&F aluminium anodised handle of length 100mm and fixed complete all as specified and directed. |
| 28 | S&F 100mm long butt hinges medium weight cold rolled mild steel and fixedcomplete all as specified and directed. |
| 29 | S&F 100mmlong hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed screws complete as specified as directed. |
| 30 | S&F Powder Coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete as specified as directed. |
| 31 | S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron).anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 32 | S&F Powder coated of any colour (Thickness or powder coating not less than 50 micron) anodised aluminium window(three track) and ventilator shutters, cupboard shutterwithout sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete as specified as directed. |
| 33 | M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 34 | Supply and fix5.50 mm thick plain glass exc 0.5 sqm in each pane fixedto aluminium windows and iron frame complete as specified as directed. |
| 35 | S&F for Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete as specified as directed. |
| 36 | S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of averagewidth of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete as specified as directed. |
| 37 | S&F in repairs Rotational moulded polyethylene water storage tanks 1000 litre capacity, three layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank complete as specified as directed. |
| 38 | S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe and fixed complete as specified as directed. |
| 39 | Supplying and fixing in repairs Mirror of selected quality glass, 6mm thick, copper polished, edges chamfered and diamond polished over 3mm thick acrylic sheet, fixed with screwson steel studs cap with chromium plated brass screws and cap washers complete as specified as directed. |
| 40 | S&F in repairCurtain Rod/ drapery rod 25mm dia Decorative type with a pair of brackets, powder coated of approved pattern and colour, complete as specified as directed. |
| 41 | M&L for Preparing newly plastered surfaces of wall and applying two coats of acrylic base exterior grade (100% Acrylic) over a coat of primer complete all as specified and as directed. |
| 42 | M&L preparation of new plastered surfaces and applying two coats oil bound distemper over a coat ofalkaline resistent primer over and includinga coat of 3mm thick wall care putty to the surface complete all as specified and as directed |
| 43 | M&L preparation of old plastered surfaces by complete removal of existing treatment and applying two coats oil bound distemper over a coat ofalkaline resistent primersurface, complete all as specified and as directed. |
| 44 | M&L for Granite slab 16 to 18mm thick machine cut,for window cill ,jambs ,pilleretc bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over screed bed 15mm thickCement Mortar 1:4including rubbing and polishing complete as specified as directed. |
| 45 | S&F in repairs door closerhydraulically regulated aluminium (extruded section) bodydesignation No. 3,universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 61 to 80 kg and fixed complete as specified as directed. |
| 46 | S&F PVC (SWR) 110mm bore pipes single socketedin anoy length with rubber ring laid in trenches or in floors complete all as specified and directed. |
| 47 | S&F PVC (SWR) bend 110mm dia radius complete all as specified and directed. |
| 48 | S&F 15mm bore GI tubing medium grade with all fittingsfixed to walls or laid in floors complete as specified as directed. |
| 49 | Description all as per item above but 20mm dia complete as specified as directed. |
| 50 | M&L for Plain Cement concrete 1:3:6 mix type C1 (Using 20mm graded stone aggregate)cast in situ, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like includingweathering, slightly rounded or chamfered angles and throating, as directed |
| 51 | S&F in repair PVC connections 15mm size with PTMT nuts of length 375mm complete all as specified and directed. |
| 52 | S&F for 15mm stop valvescast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for union complete as specified as directed. |
| 53 | S&F in repair for Healthfaucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as specified as directed. |
| 54 | S&F 15mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 55 | S&F in repair brass CP mixer for mixing hot and cold waterfor bath room with telephone shower arrenge ment and crutch and screwed down for iron pipe and fixed complete as specified as directed. Make- Jaquar/Cera or equivalent. |
| 56 | S&F in repair flexibale stainless tubes 8mm dia &1.5mm long with nuts to connected tohand sower complete as specified as directed. Make- Jaquar/cera or equivalent |
| 57 | S&F in repair wall out with shower Hook in round shape fixed in wall complete as specified as directed. |
| 58 | S&F in repairs vitreous china Full pedstal wash basinssize 560x415x200mm excludingtaps, waste chain, porcelain stopperand plug but including brackets complete as specified as directed. Make- Jaquar/cera or equivalent- |
| 59 | S&Fin repair central hole basin mixer chromium plated, screw down high pressure, with or without lettred hotor cold with long screwd for iorn pipeand fixed complete as specified as directed. Make- Jaquar/cera or equivalent |
| 60 | S&F in repair waste coupling 32mm dia half thred with 80mm height for fixing of wash basin complete as specified as directed. |
| 61 | S&F vitreous china Wash down water closet (Padestal pattern)rimless single piece WC with UF soft close seat cover,hinges,dual flush cistern,fittings,fixing accessories set ,P trap complete as specified as directed. Make- Jaquar/Cera or equivalent |
| 62 | S&F in repair corner glass self with bracket fixed in bath room complete as specified as directed. |
| 63 | S&F in repair Stainless Steel towel rail 450mm long fixed in repair complete as specified as directed. Make- Jaquar/cera or equivalent. |
| 64 | S&F in repair toilet paper holder Stain less steelfixed in repairs complete as specified as directed. Make- Jaquar/Cera or equivalent |
| 65 | Double Bed with storage with net (size 6.5\" x 6.0\"), Make:- Godrej \"Adria King\", Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 66 | Bed side Table (plywood + veneer finish base with glass top) size- 51.6cm x 46.1cm x 46cm,Make:- Godrej \"Adria\", Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 67 | Ward drobe (size 7\" x 4\") 3 doors wardrobe,Make:- Godrej \"Alina\", Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 68 | Dressing unit (size 7\" x 2\"),Make:- Godrej \"Adria\", Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 69 | Double Bed mattress (60 x 72 x 6),Make:- Godrej \"Ortho Delux\", Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 70 | Head board cushione panel (bed) (size 6.5\" x 3\"),Make:- Godrej \"Glory with Morpheus\", Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 71 | Sofa set (Framing + Foam + fabric , 9 ft length),Make:- Godrej \"PISA\", Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 72 | Centre table ( Plywood + lminate finish base with glass top),Make:- Godrej, Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 73 | Corner table (plywood + laminate finish base)Make:- Godrej, Durian, Usha or equivalent items as approved by Engr-in-charge. |
| 74 | M & L for point wiring for complete with proper colour coding using 1100 Volts grade 2.5 sqmm PVC insulated FRLSH unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marking in and including PVC conduit of size 25 mm dia ISI, concealed , ISI marked with all accessories fixed in wall/ceiling/roof/floor etc , withwith modular white cover plate and frame of module suitable for mounting switches, sockets, fan regulators including 2.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed for the following :Make for copper cable -Polycab, KEI, Havells Make for PVC pipe -Precision or equivalent |
| 75 | (a) One 6 Amp socket point controlled by one switch on Independent Board |
| 76 | S&F Moduar switch 6 Amp , 1 way , 1 module complete all as specified and as directed. |
| 77 | S&F Moduar socket 6 Amp , 2 module, 2/3 pin complete all as specified and as directed. |
| 78 | Supply and Fix TV unit screen size 43 inch with AC power cord, batteries, operating instructions, wifi standard frequency 2.4 GHz/5GHz, LAN input, Bluetooth profile support,, cromcast inbuilt, apple airply, HDMI input-04 Nos, HDCP 2.3, USB Support with USB ports-02 Nos, 4K HDR Processor X1TM, 10+10W audio power uotput, BASS reflex speaker, X Balance speaker, Dobly TM Audio, Goog;e TV, inbuilt operatng system amdroid TV TM with inbuilt voice search featurecomplete including installation and testing. Make: Sony Bravia |
| 79 | Supply and install testing and commissioning of split type air conditioner 2.0 TR capacity inverter tectnology 5 star rating with inbuilt air ionisor filter and plasma filter for better indoor air quality EER 3.2 with cordless remote control,single phase,240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, duly powder coated fixingwith anchor bolts at any height,drain pipe of suitable size brought to ground level from any height,intial filling of refrigerant gas inculding making round hole on existing wall for taking up refrigerant tubing, drain pipe,cables etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directedNote: 1. Quoted price includes 2M Plate and surface box for fixing socket and 1M box and plate for fixing Modular MCB2. The copper tubing must be covered with proper casing and capping with suitable size and length .3. AC\"s to be installed at various heights and locations at G+3 building.Make :- Daikin model FTKL71UV16 White or equivalent in Carrier/Hitachi/voltas |
| 80 | Supply and fixVoltage stabilizer for automatic operation,single phase naturally air cooled indoor type ,Wall mounted type & designed for input variation between 130 V to 300 V with output voltage stabilized at230 V with accuracy of ± 2.5%and of capacity 3800 VA.Make- V Guard VGB 500 or equivalent in Microtek |
| 81 | Supply and fix Modular socket 25 Amps, 2 module, heavy duty for AC with white cover plate and surface box complete all as per specified and direcetd by engineer-in-charge.Make- Legrand/C&S/havells |
| 82 | Supply and fix miniature MCB SP 25 Amps ,C series , including 1module white cover plate and surface box at a height 1.5 mtr above FFL and connecting to 25 Amps socket via 4 sqmm wire for complete connection between MCB and socket for operating of AC supply complete all as specified by engineer-in-charge.Make- Anchor/Legrand/C&S/havells |
| 83 | Supply and fix factory fabricated mild steel stand suitable for installation of out door unit of split type air conditioner fixing arrangement with anchoring bolts on wall surface at suitable height as per site condition. |
| 84 | Material and labour for submain wiring along with earth wire using 2x 4.0 sq mm (colour coading) + 1x 4.0 sq mm earth wire (green colour) of single core PVC insulated multistrand copper conductor 1100 Volts grade FRLS-H type in and including PVC Conduit of size not less than 25 mm dia (isi marked) with all accessories suchas bend, junction boxes, short pipes of suitable size complete all as specified.Note: Two run of 4.0 sqmm cable and one run of 4.0 sqmm cable and one run of PVC casing capping will be measured as one unit. |
| 85 | M & L for point wiring for complete with proper colour coding using 1100 Volts grade 1.5 sqmm PVC insulated FRLSH unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marking in and including PVC conduit of size 25 mm dia ISI, concealed , ISI marked with all accessories fixed in wall/ceiling/roof/floor etc , withwith modular white cover plate and frame of module suitable for mounting switches, sockets, fan regulators including 1.5 Sqmm PVC insulated FRLSH unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed for the following : Make : Polycab / KEI / HavellsNote(For item No 1) : (i) Quoted rates include circuit wiring of 2.5 Sqmm from MCB in MCB DB Boxto switch board as required at site.Note(For item No 1 & 2): (i) Quoted rates include chipping in walls for fixing of conduit pipes and making it good by applying plaster all as required at site. |
| 86 | (a) One light controlled by one switch |
| 87 | (b) One ceiling fan controlled by one switch |
| 88 | (c) One three pin switch socket 5 amp outlet on same board with other switches |
| 89 | (d) ditto but 2.5 sqmm wiring one three pin switch socket 5 amp outlet on independentboard |
| 90 | M & L for point wiringcomplete with proper colour coding using 1100 Volts grade 2.5 sqmm PVC insulated FRLS-H unsheathed cable with multistranded copper conductor conforming to IS : 694:1990 with ISI marking in and including IN PVC Conduit of 25mm dia, Concealed, ISI marked with all accessories fixed in wall/ceiling/roof/floor etc , with modular white cover plate and frame of module suitable for mounting of 3 pin socket 16 Amp, Independentincluding 2.5 Sqmm PVC insulated FRLSH unsheathed 1100 Volts multistranded copper conductor green colour conforming to IS : 694:1990 with ISI marking as continuous earthwire connected to common earth dolly all as specified and directed .Make for copper cable -Polycab, KEI, Havells |
| 91 | S&F Ceiling rose with surface bakelite ,65 x 50 mm polycarbonate, isolated body,three terminals with ISI mark all as specified and directed. Make : SSK/Havells/Plaza/Anchor |
| 92 | S&F Moduar switch 6 Amp , 1 way , 1 module complete all as specified and as directed. |
| 93 | S&F Moduar socket 6 Amp , 2 module, 2/3 pin complete all as specified and as directed. |
| 94 | S&F Moduar switch 16 Amp , 1 way , 1 module complete all as specified and as directed. |
| 95 | S&F Moduar Socket6/16 Amp ,2/3 pin combined , 2 module complete all as specified and as directed. |
| 96 | S&F fan regulator modulartype, 240 V , two module with steps in increasing speed order complete all as specified and directed. |
| 97 | S&F BEE energy efficent BLDC high speed cailing fan having 1200mm blade sweep, air flow not less than 210CMM, operating voltage 220-240 V and frequency 50 Hz, including a down rod of suitable size and electrical connection with 3 coreflexible copper conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. |
| 98 | Supply and fix fan rod of length 0.3 to 1 mtr below the false ceiling as required at site complete all as specified and as direcetd. |
| 99 | Material and labour for submain wiring along with earth wire using 2x 4.0 sq mm (colour coading) + 1x 4.0 sq mm earth wire (green colour) of single core PVC insulated multistrand copper conductor 1100 Volts grade FRLS-H type in and including PVC Conduit of size not less than 25 mm dia (isi marked) with concealed wiring along with all accessories suchas bend, junction boxes, short pipes of suitable size complete all as specified. Make : Polycab / KEI / HavellsNote: Three run of 4.0 sqmm cable and one run of PVC conduit shall be measured as one unit. |
| 100 | Supply and fix MCB DB SPN ,double door, IP-42 ,12 Way having earth terminal, neutral bus terminal for 12 way circuits complete in all respect mounted on wall including making connection with legs/thimbles all as specified and directed by engineer-in-charge. Make : Havells / Legrand / L&T |
| 101 | S & F MCB SPN 63 Amps , 10 KA , 240 V in CB Box complete all as specified and direced by enineer-in-charge. Make - legrand/Schneider/Hanger |
| 102 | S & F MCB SP 06-32 Amps , 10 KA , 240 V in CB Box complete all as specified and direced by enineer-in-charge. Make - legrand/Schneider/Hanger |
| 103 | Supply and fix Decorative Wall Mounting with different finishes with Soda Glass Type including4 W T32 LED Lamp with E27 base complete all as specified by engineer-in-charge. CAT No : LHFHBADBTB1O007 in Havells or eqvivalent in Surya / Shakti |
| 104 | S&F LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling incl cutting of false ceiling any typeconnecting up with driver three core flexible copper conductor of suitable size complete. Make : Surya/Shakti/Havells |
| 105 | Supply and fix LED recess square light 8 inch x 8 inch 9 in aluminium die cast housing , Lumen efficiency 70 lumen/watt complete including cutting in false ceiling and fixing all as specified by engineer-in-charge. Make : Surya / Havells /Shakti |
| 106 | Supply and fix flexing LED strip 24 W, (5 M) RGB / Warm White,high brightness, with uniformity of lights, including connecting with connectorscomplete all as per site requirement. Make : Surya / Havells /Shakti |
| 107 | Supply and fix LED strip driver 12 V, 2A constant voltagefor 24 W stripincluding connection to LED strip complete all as per site requirement and colour as required at site as assigned by engineer-in-charge. Make : Surya / Havels / Shakti |
| 108 | Taking down old unserviceable point wiring copper / aluminium any type (Light, fan, socket or power point) complete, including fixtures and firrings such as switches, ciling rose, pendents, regulators, sockets etc complete all as directed. |
| 109 | Taking down old unserviceable DBs complete with MCB and all connected items complete all as directed and specified. |
| 110 | Removal of existing Tubelights of any wattage from any place and to be handed over to E/M store at Murud Janjira station complete all are as per the direction of Engr-in-Charge |
| 111 | Note :- (i) Work to be carried out on GL to 8th floor (incluing terrace of building) from ground level. (ii) Rate for Scaffolding and Safety System for labour are included in quoted raes by Contractor. (iii) Safety Net and Water Proofing covering materials shall be arrange by Contractor while working at Site and it will be deem fit in quoted rats by Contractor.Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft /loose soil complete all as specified and directed. |
| 112 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n exc 1.5m in depth and getting out hard/dense soil complete all as specified and directed. |
| 113 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in soft / loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed. |
| 114 | M&L for rolled mild steel Joist, channel, angle, tubular or tee sections in Fe-410-W (Gde-E-250) quality-B, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) including for making arrangements for tieng of Volley ball net all as required complete all as specified and directed. |
| 115 | M&L for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins Fe-410-W (Gde-E-250) quality-B, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 116 | M&L for PVC coloured corrugated sheet 1mm thick of any colour as in roof covering/cladding to wall, in ridge line, fixed with self tapping screws complete all as specified and directed. |
| 117 | M&L forCement concrete in foundations, filling and mass concrete type D2 (1:4:8) in foundations of bed of drains, filling and mass concrete complete all as specified and directed. |
| 118 | M&L for Pre-cast cement concrete block masonry type C-1, 1:3:6 (20mm graded aggregate) set in cement mortar 1:4 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed. |
| 119 | M&L for Hardcore of broken stone of gauge n.exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 120 | M&L for 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub base to pavement complete all as specified and directed. |
| 121 | M&L for Granite (of any type) tiles 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 122 | M&L for Granite (of any type) tiles 20mm thick as in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 123 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 124 | M&L for 20mm thick Quartz stone (Scratch Resistant, Heat resistant, Water absorption < 0.1%, Moh\"s hardness class > 6, abrasion resistance < 156mm3, flexural strength > 5000 psi, compressive strength > 14500 psi, density > 2.20 g/cc) of table rubbed and polished for cooking platforms and like laid over suitable adhesive over 12mm thick cement mortar (1:3) and pointing with adhesive along with admixture of pigment to match with shade of Quartz stone. (Make: TechnoQuartz or Equivalent with similar or superior specifications) complete all as specified and directed. |
| 125 | S&F of Aluminum composite panels of Al strong make for external wall cladding at all levels with all necessary Aluminum member frame works at all heights and elevation fixed on to the supporting brick masonry/ RCC frame, fastening material and hardware complete with all labour, material, equipment, handling, transportation, workmanship, preparation of shop drawings, staging, scaffolding, etc, all complete. The work shall also include for providing structural glazing with 12mm or more thick toughened glass of approved colour, to match with existing elevation of the building. The payment for structural glazing shall be all as per ACP panelling work only. Contractor to quote the rate after due estimation of ACP panelling portion and Glazing portion as per site. Work is to be executed as per approved shop drawings and Instructions of the Engineer-in-Charge. The aluminum composite panel should consist of 3mm thick thermoplastic core of anti oxidant LOPE sandwiched between 2 skins of 0.5mm thick aluminum alloy sheet making a total panel thickness of 4mm. The surface shall be finished with PVDF based coating of minimum 30 micron on the topsides and services coating on the reverse side shall be with polymer paint. The surface shall be protected with self adhesive peel off masking foil. The system shall be designed to withstand a wind pressure of 150kg/Sqm and shall be fixed to the Masonry/RC frame with necessary clamps, brackets and anchor fasteners. All clamps and brackets shall be hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. The extruded aluminum section shall be anodized in approved colour with anodic coating of minimum 20 microns. Extruded section shall be 6063 T5 or T6 alloy conforming to ASTM B221. Any other festering straps, nuts, bolts, rivets, washers, etc. shall be in stainless steel SS304 grade Including providing open cell polyethylene backer rods, weather sealant etc. The weather sealant shall be Dow Corning 688/795 or equivalent. All the work shall be as per Manufacturer\"s specifications and approved shop drawings. |
| 126 | M&L for Virified Ceramic tiles dark shade/Double charged / ultra charged 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 127 | M&L for Glazed ceramic coloured tiles in vertical surface 600 x 1200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat 1:3 complete all as specified and directed. |
| 128 | M&L 10mm thick Screed bed or beddding layer of CM 1:4 over 20mm thick PCC 1:2:4 (12.5mm graded aggrgate) in for laying floor finishes complete all as specified and directed. |
| 129 | M&L forReturning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed. |
| 130 | Removing excavated material to a distance n.exc 50m and depositing where directed outside MOD land. Note: It is responsibility of the contractor to get permission from Local Authorities for site of disposal of material complete all as specified and directed. |
