|
| 1 | Taking down old cement plaster including ranking out joints, hacking for key, scrubbing down with water etc and rubbish off the premisses complete all as specified and directed. |
| 2 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 3 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed. |
| 4 | Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed. |
| 5 | Taking down shutter and refixing with easing in same openingof any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed. |
| 6 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed. |
| 8 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed. |
| 10 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 11 | Demolition ofconcrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 12 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed. |
| 13 | M&L providing non- skid glazed ceramic tiles coloured 7 - 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 14 | M&L providing non- skid glazedjoint free ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in dado/skirtingetcincluding 10 mm thick renderingin CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement includingto matchcoloured tiles complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 15 | M & L Glazed ceramic coloured tilesin vertical surface 300 mm x 450mm x 7 mmthick set and jointed in neat cement slurry and pointed in white cementor colouredcement to match the surface incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 16 | M&L for Vitrified light shade coloured ceramic tiles 8-10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqmin floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over andincl 15mm thick screed bedin CM 1:6 completecomplete all as specified and as directed.Note : Engr-in-Charge will select sample from latest catalouge. |
| 17 | M&L for Vitrified light shade colored ceramic tiles 8-10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqmin skirting/dado etc., set and jointed in neat cement slurry and pointed in whiteor coloured cement to match the shade of tile over andincl 10mm thick renderingin CM 1:4 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge. |
| 18 | M&L for 40mm thick plain cement concrete 1:2:4, type B1 (using 20mm graded stone aggeregate) finished the surface even and smooth using extra cement as in floor complete all as specified and as directed. |
| 19 | M&L 15-18 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed |
| 20 | M & L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length.Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed. |
| 21 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. |
| 22 | M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed. |
| 23 | M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cementto on brick masonary wall surfaces or on other than fair faces of brick masonaryfinishedeven and smooth without using extra cementcomplete all as specified and directed. |
| 24 | M&L rendering 5 mm thick in CM 1:3as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed. |
| 25 | Taking down carefully existing bitumen tarfelt including plastering upto 15mm thick cleaning the surface and make free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated and removingall foreign materials / Bitumenous primer completely , cleaning and washing the existing surface of roof/slab, terraces including flashings and junctions of parapets/Curb walls etc and as directed by Engineer-in-charge. |
| 26 | M&L for providing ement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etec all as specified and directed by Engr in Charge |
| 27 | M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces mixed including water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge. |
| 28 | M&L for cleaning the newly plastered surfacesthroughly with wire brushes and providing water proofing treatment all as given here in after(a) Bituminous primer @ 0.3lit per Sqm conforming to IS-3384-1986 (b) 3 mm thick APP polymer modified moply FPwith minimum wt 3.0 Kg per square metre membrane (one layer) laid by torch application method.(c ) Applying two coat of bituminous based aluminiumpaint @ 0.20 Kg in two coats (total in two coats) per square metre over membrane. Complete all as specified and directed by Engineer-in-charge.(d) The overlaps of APP shall be SSR part 1 and APP shall be laid by expert/ skilled workers only, bitumen based aluminiouspaint applied by brushes only. |
| 29 | M&L for repairs to sunken floor slab with the following specifications:-(a)Demolition of PCC and taking out old brick bat fillihng and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b)PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. The dia of GI Spuot pipe shall be 50mm Medium grade.The minimum length of Spout shall be 500mmand if any spout comes above chajja than the length of the spout shall be more than Chajja projection.Ends of Spout shall be tippered and any cutting through brick/ RCC structure shall be done by the Contractor rates are deemed to be included of this aspects.(c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth with using extra cement.(d) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of primer (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make :smart care Damp proof of M/s asian paint or equivelentfor water proofingcompound.(e) Graded Brick bats filling under sunken floorof required thickness as per site, (f)PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase. Note:- (i) For payment purpose only plan floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will re do the whole process without any extra payment. |
| 30 | S & F in repair 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified as directed |
| 31 | S&F for 30 mm thick factory madeflush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 32 | S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers the size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.(Note :- S & F wire messshall be measured and paid for separately) |
| 33 | M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. |
| 34 | S&F mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed. |
| 35 | M&L in repairs for machine pressesd coloured glazed chequered cement concrete tiles 25mm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar (1:6), complete all as specified and directed. |
| 36 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium specified and directed as appended below:-(i) Window frame :95x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over.(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v) Aluminium fittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 37 | S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i)frame :45.2mm x35mm X 1.15 mm(ii) Aluminium beading - 0.7mm thick(iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing.(iv) Aluminium neccessary fittings complete as required.(v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 38 | S&F for 18 mm ,prelaminatedboard exterior grade with one side decorative lamination glossy finish & other side plain white as in shelves, sides, back and doors including PVC lipping on all exposed edges of same texture & shade to match that of laminate, fitted with piano hinges, wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, withcomplete all as specified. Make- Rajshri/greenply/ centuryplyNote: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Frame to be fixed to walls, soffits & base of cupboard with fasterners |
| 39 | S&F in repairs 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complte all as specified. |
| 40 | M& L for repairing to existing rolling shutters of any size , replacingthe bottom lock plate/bracket plates/crank handles/curtain / guide channel/hood cover/ lath section /pulling hooks/rollers/ of any other part of rolling shutters with new and including taking down and wellding of any part o rolling shutter(if required) at same place after making the shutter smooth functional with neccessary fittings required all as specified and directed.. |
| 41 | S&F in repair 40mm dia cupboard Knobs fixed with necessary screws, nuts etc all as specified and directed |
| 42 | S & F in repair 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 43 | S & F in repair 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 44 | S&F in repair 150mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 45 | S&F in repair fancy type 200 mm size stainless steel handles, completed all as specified and directed. |
| 46 | S&F in repar 100 mm in size butt hinges medium weight stailess steel colled rolledcomplete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller platewelded to mild steel frame.fixed in repair complete all as spd & directed. |
| 48 | S&F in repair 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed |
| 49 | S&F in repair 300 mm long Stainless steel sliding door bolts( without locking arrangements)not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix with as weldingcomplete all as specified and directed |
| 50 | S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing. |
| 51 | S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving aPanelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 52 | S&F mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed. |
| 53 | M&L in repairfor 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including Hacking out old, broken glass (any thickness, size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all specified and as directed. |
| 54 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed. |
| 55 | S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 56 | S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in M S window / wooden shutter complete all as specified and directed |
| 57 | S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoistedand fixed in position all as specified in SSR Part- I including dismantling ofexisting water tanks capacity n exc 1000 ltr complete all as specified and directed. |
| 58 | S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system) hoistedand fixed in position all as specified in SSR Part- I including dismantling ofexisting water tanks capacity n exc 500 ltr complete all as specified and directed. |
| 59 | Disconnecting existing tanks exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, including cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. and hositing if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). |
| 60 | S&F in repair service tank lid / cover of size 0.45 m dia and 0.20 m heightmade with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity incl necessary nut, bolts washers and locking arrangement complete all as specified anddirected. |
| 61 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 62 | S&F GI tube 15 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed. |
| 63 | S&F GI tube 20 mm dia medium grade with all fittingsand fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed. |
| 64 | S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including CP 15mm dia swan neck pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mmbore HDPE waste down pipe including Stainless steelbrackets all s directed. |
| 65 | S&F in Vitreous China counter top oval type colouredwash basin suitable size including swan neck pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified. |
| 66 | S&F in repair stainless steel of AE - SI 316 grade tubulartowel ringincluding apair ofCP brass bracket complete all as specified. |
| 67 | S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink & WHB fixing and connection to pipes complete all as directed. |
| 68 | S&F in repairs Brass chromium platedwall mixer 2 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. |
| 69 | S&F in repairs brass chromium platedwall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed. |
| 70 | S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified |
| 71 | S & F in repair fancy type 150mm size square brass CP shower rose all as specified. |
| 72 | S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turncomplete all as specified as directed. |
| 73 | S&F in repair fancy type chromium plated brass two way Anglevalve suitable for 15mm bore pipe complete all as specified and directed. |
| 74 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 75 | S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified. |
| 76 | S & F in repairsISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed |
| 77 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified. |
| 78 | S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed. |
| 79 | S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified. |
| 80 | S & F matt finishedSS 125 mm hasp and staple including bolt to hinge plate and fixed with S S screws complete all as spd and directed |
| 81 | S&F forstainlesssteel matt finish Hat peg set of five tier with necessary fitting completed all as specified and directed |
| 82 | S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified . |
| 83 | S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 84 | S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed. |
| 85 | S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with \"P\"or \"S\" trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. |
| 86 | S&F in repair vitreous China coloured European type WC with \"P\" or \"S\" trap 1st quality including connection to drain and fixing bolts and PVC sheet cover white completeall as specified. |
| 87 | S&F in repairs, PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed. |
| 88 | S & F 15 mm dia CP health faucetwith 1.0 Meter Long Flexible pipe and holder complete all as specified and directed |
| 89 | S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) cement complete all as specified and directed |
| 90 | S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) cement complete all as specified and directed |
| 91 | S&F in repairPVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, typeB-1 complete all as specified and directed. |
| 92 | S & F in repairs of ISI marked waste fittings 32mm dia of brass, chromium plated for glazed ware sink, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and directed |
| 93 | S & F in repair 32mm dia PVC waste pipe for sinks/ basin andcomplete, all as specified. |
| 94 | S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unionand cap and fixed in repair for 32 mm bore |
| 95 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting complete all as specified and directed by Engr-in-charge. |
| 96 | S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed. |
| 97 | S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. |
| 98 | S&F PVC (SWR) 75mm bore bends any radiuscomplete all as specified and directed. |
| 99 | S&F PVC (SWR) 75 mm bore junction single (Single \"T\") equal or unequal with access doorcomplete all as specified and directed. |
| 100 | S&F PVC (SWR) 110 mm bore junction single (Single \"T\") equal or unequal with access doorcomplete all as specified and directed. |
| 101 | S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less,firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed. |
| 102 | S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed. |
| 103 | S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified. |
| 104 | S & F for 1 mm thick stainless steel kitchen sink size 590x460x230mmundermount, single bowl (bowl size 540x410x230 mm), incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed. |
| 105 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed |
| 106 | S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 107 | S&F in repairstainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed |
| 108 | S&F in repair20 mm dia stainless steel 1.0 mm thick fancy type SS curtain rods with decorative design matching brackets as approved and knobs (lattu) or end bracket as required& other all neccesary fittings fitted with SS screws etc on each end complete all as specified and as directed. |
| 109 | M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges ofsunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed. |
| 110 | S&Fin repairs Rubber strip 15mm, 75mm wide and 1200mm long |
| 111 | S&F in repair floor door stopper brass body and tongue with hard drawn steel spring complete all as specified and directed. |
| 112 | S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as spd as directed |
| 113 | S & F in repairs for plastic seat cover (plastic water closet seat and cover) closed pattern with flat bottom and Mild Steel chromium plated or aluminized hinging device complete. all as specified. |
| 114 | M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying Two coat of oil bound distemper over a coat ofputty complete all as specified and directed |
| 115 | M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying one coat of oil bound distemper complete all as specified and directed |
| 116 | M & L for preparation of old plastered surfaces of ceiling including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying one coat of oil bound distemperover a coat of puttycomplete all as specified and directed |
| 117 | M & L for preparation of old painted wood or wood based surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 118 | M & L for preparation of old painted steel and iron surfaces of any description, not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 119 | M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed. |
| 120 | M & L for preparing new plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and as directed |
| 121 | M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed. |
| 122 | M & L for preparation of new plastered surface of wall and applyingtwo coats of oil bound distemper over a coat of wall care putty1mm thickcomplete all as specified and as directed |
| 123 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing allretrieved materials toMES storesfor segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all asspecified and as directed by the Engineer-in-Charge. |
| 124 | M&L concealed point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through &including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings, junction boxe, covers etc, with and incl concealed MS sunken box of suitable size flush with wall surface, suitable for fixing of Modular type switches / sockets etc, complete all as specified and directed for the following :- |
| 125 | All as per item No 124 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge. |
| 126 | All as per item No 124 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge. |
| 127 | All as per item No 124 One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size |
| 128 | All as per serial item No 124 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge. |
| 129 | S&F Modular Switch 1 way 16 Amps, 1 Module size complete all as directed.. |
| 130 | S&F Modular Socket 6 A, 2/3, Pin 2 Module size complete all as directed.. |
| 131 | S&F Modular Socket 6A/16 A, 5 Pin ,2 Module size complete all as directed.. |
| 132 | S&F Modular Switch 1 way 6 Amps, 1 Module size complete all as directed.. |
| 133 | Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 134 | Supply and fixing angular lamp holder, metal cased body of brass with back plate inbatten fittings, including Plastic square box of required size complete all as specified and directed by the Engineer-in-Charge |
| 135 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 136 | S&F City-2 dome light with base of plastic body including provision of hoder including LED bulb of min capacity 7 Watt all as specified and directed by Engr-in-Charge. |
| 137 | S&F in replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 Nos. MS clamp made of MS flate iron of 50 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer, complete all as directed. |
| 138 | S&F in replacement LED street light luminaire of 25 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge. |
| 139 | Supply and fixing in replacement sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete complete all as specified andas directed by the Engr-in-Charge.. |
| 140 | Supply and fixing in replacement SPN 40 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 141 | Supply and fixing in replacement SP 5 to 32 amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 142 | M&L for sub main wiring with 2 run of 4 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 20 mm and aboveincl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed complete incl taking out old wiring and conduit |
| 143 | Earthing complete withgalvanized steel earth plate electrode 60 cmx 60 cm x 6 mm thick buried directlyin ground (earth pit notless than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level,connecting to theGalvanized ironearth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron andsteelearth wire protected by provision of GI lightgrade pipe15 mmbore including provision of concrete pitmade from PCC ( 1:2:4) type B-1 (using20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plateNo 3 of SSR 2020 Part-I and connecting toMCBDB’searth test point all as specified or indicated including testing on completion . |
| 144 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm. |
