|
| 1 | Supply&Fixing of 30 mtr High mast shaft of approved make with rising system hot dip glavanized inside & outside dip, heaving pole sheet thickness 4mm. Top dia minimum 150mm, Bottom dia 500 mm base plate 32mm thick suitable for wind velocity as per IS 875 part 3 heaving no circumferential weld,.......as per SI NO. 21.3.4 |
| 2 | Supply&Fixing of 6 mtr GI Octagonal pole of approved make ( Top dia 70mm, Bottam dia 130mm and base plate 12mm thick) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts excavation & back filling and Required T&P completee in all respect. as per SI No.21.2.6 |
| 3 | Supply & Laying of aluminium conductor cable PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand all around and protected with burnt bricks on sides and on top as directed by Engineer in charge with all complete of work for 10 sqmm 2 core as per SINo. 201.1.2 @ 0.8475 |
| 4 | Eathing with GI earth pipe 4.5 m long, 40mm dia including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal/ cock and salt as required DSR 2022 5.2 |
| 5 | Supply and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVCconduit as required. As per DSR 1.17.20 for 2x4.0sq. Mm |
| 6 | System for raising lowering of flag. It shall have single drum winch ,6mm dia stainless steel wire rope & integral power tool for the raising & loweing of flag .Suitable control panal shall be provided for reversing operation of power tool single phase moter |
| 7 | S/F of 63 Amp TPN switch disconnector fuse unit (Panel mounted type) with ISI marked HRC fuses…complete DSR 2022 1602 |
| 8 | Supply of system & aviation obstruction light (Make to be specified ) with 2Cx2.5 sq.mm CU armared cable. 1 no. LED AOL per mast with Decorative doom |
| 9 | Supply&Fixing of Factory wired integral LED Flood light Luminaires with die cast aluminium housing with toughend glass/UV stabilized PC cover and lences built with mandatory driver set suitable for 170-200 Watt.confirming to IP 66, IK 07 protection complete in all respect with 5 year warranty SI No. 23.26 CAT AAA 17337.0x0.8475=14693.11 |
| 10 | Construction of foundation with concrete for PLATEFORM Erection of the Flag |
| 11 | Earth work in excavation in foundation I/C all labour T&P etc. as per si no 251. |
| 12 | E/W cutting or filling in embankment in ordinary soil lead upto 1km and left upto 1.5m as per SI No. 2.25(a) |
| 13 | L.C. in 1:4:8 brick Ballast 40 mm stone including watering ramming etc. complete. As per si no-4.1.8 |
| 14 | Brick work in M-150 in 1:4 cement sand mortar in foundation up to plinth including all material, Labour, T&P etc.as per si no 6.1.1 |
| 15 | P/F 18mm thick gang saw cut, mirror polished premould and prepolished,machine cut plateform (1:4) cement and c sand , Raj nagar plain white marble./udaipur green marble Zebra black marble area of slab over 0.50 sqm as per si no 8.2.2.2 |
| 16 | Provinding edge moulding to 18 mm thick marble stone counters,vanilities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer in charge .Granite work. As per DAR 8.3.2 |
| 17 | P/F stainless steel (Grade 304) railing made hollow tubes channels, plates etc inculding welding ,grinding , buffing ,polishing and making curvature (wherever required) and fitting As per DSR 10.28 |
| 18 | Erection of the Flag mast with the help of suitable equipments & assembly of operating system (Cane) |
| 19 | Supply of National Flag of size 20x30feet in 100% knittes heavy polyyester GSM 160 wire reinfrced 3 side and rope/toggle sleeve with eye hight. Double stitched on all sides with included all |
| 20 | ADD GST @ 18% Please Enable Macros to View BoQ information |
