|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 2 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 5 | In cement mortar |
| 6 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 7 | Of area 3 sq. metres and below |
| 8 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 9 | 15 mm to 40 mm nominal bore |
| 10 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 11 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 12 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. |
| 13 | All kinds of soil |
| 14 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 15 | All kinds of soil |
| 16 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 17 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 18 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 19 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 20 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 21 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 22 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 24 | Shelves (Cast in situ) |
| 25 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 26 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 27 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 28 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 30 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : |
| 31 | ISI marked Stainless steel butt hinges with stainless steel screws : |
| 32 | For 2nd class teak wood and other class of wood shutters |
| 33 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 34 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 35 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 36 | 20 mm dia (heavy type) |
| 37 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) |
| 38 | 250x16 mm |
| 39 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 40 | 200x10 mm |
| 41 | 150x10 mm |
| 42 | Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) |
| 43 | 300x20x6 mm |
| 44 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 45 | 125 mm |
| 46 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete. |
| 47 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 48 | 250x16 mm |
| 49 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 50 | 300x10 mm |
| 51 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 52 | 125 mm |
| 53 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 54 | Twin rubber stopper |
| 55 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 56 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 57 | Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge |
| 58 | Anodized (AC 15 ) aluminium |
| 59 | Repairing of Aluminium door shutter with frame for smooth operation including taking out door with frame, dismembering aluminium door sections, taking out panelling, reassembling the door shutter with required aluminium cleats /iron flat /iron angle with screws, rivets & refixing the available panelling in position with snap beading thereafter refixing the shutter in position with necessary fixtures including pivots , necessary screws etc,all complete as directed by the Engineer In charge. (a) Single or Double Shutter up to 3.00 Sqm area |
| 60 | Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 61 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 62 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 63 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 ( 1cement : 5 coarse sand) with joints finished flush. |
| 64 | Red sand stone |
| 65 | Providing and laying Ceramic glazed floor tiles( antiskid ) of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 66 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 67 | (i)Single socketed pipes. |
| 68 | 75 mm diameter |
| 69 | 110 mm diameter |
| 70 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 71 | Coupler |
| 72 | 110mm |
| 73 | Single tee with door |
| 74 | 75x75x75 mm |
| 75 | 110x110x110 mm |
| 76 | Bend 87.5° |
| 77 | 75 mm bend |
| 78 | 110 mm bend |
| 79 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 80 | 75 mm |
| 81 | 110 mm |
| 82 | 12 mm cement plaster of mix : |
| 83 | 1:6 (1 cement: 6 coarse sand) |
| 84 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 85 | 1:6 (1 cement: 6 coarse sand) |
| 86 | 20 mm cement plaster of mix : |
| 87 | 1:4 (1 cement: 4 coarse sand) |
| 88 | White washing with lime to give an even shade: |
| 89 | New work (three or more coats) |
| 90 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete as per manufacturers spefication : |
| 91 | Two or more coat on New work . |
| 92 | Finishing walls with water proofing cement paint of required shade : |
| 93 | New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 94 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 95 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 96 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 97 | Two or more coats on new work. |
| 98 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 99 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 100 | Old work (one or more coats) |
| 101 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 102 | One coat. |
| 103 | Two coats. |
| 104 | White washing with lime to give an even shade : |
| 105 | Old work (one or more coats) . |
| 106 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 107 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 108 | One or more coats on old work. |
| 109 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 110 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 111 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 112 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 113 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 114 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 115 | Renewing glass panes and refixing existing wooden fillets: |
| 116 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm). |
| 117 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 118 | Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 119 | Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. |
| 120 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 121 | Orissa pattern W.C Pan of size 580x440 mm |
| 122 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 123 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 124 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 125 | Kitchen sink without drain board |
| 126 | 610x460 mm bowl depth 200 mm. |
| 127 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 128 | Orissa pattern W.C. pan of size 580x440 mm |
| 129 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 130 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 131 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 132 | 10 litre capacity - White |
| 133 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 134 | White solid plastic seat with lid |
| 135 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 136 | Flat back wash basin of size 550x400 mm. |
| 137 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 138 | Flexible pipe |
| 139 | 32 mm dia |
| 140 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 141 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 142 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 143 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: |
| 144 | Old rusted ( unserviceable ) C.I/S.C.I pipes and fitting , Mild Steel / Steel Section, G.I/M.S pipes/ G S sheet/Profile Sheet etc. |
| 145 | Brass Items like CP brass bib cock, Stop cock, Pillar cock, Angle cock etc including internal existing fittings phase, washer etc. |
| 146 | Low level PVC flush tanks (10 litres) |
| 147 | Old damaged, broken,unserviceable PVC tank capacity upto 500 litre |
| 148 | Old damaged, broken,unserviceable PVC tank capacity 1000 litre. |
| 149 | Credit of old unserviceable wooden door shutters of area 3 Sqm or below, recovered from dismantling of partition/door shutters. |
| 150 | Repairing of old CI/PVC flushing cistern including replacing syphon and ball valve etc. including cleaning of cistern internal wall with required acid etc., all complete as per direction of Engineer-in-charge. |
| 151 | Providing and fixing of M.S. / C.I /Angle bracket to wash basin/sink i/c removal of old damaged bracket and refilling, finishing of hole etc. ,all complete as per direction of E-I-C. |
| 152 | Cleaning and de-silting of chocked WC Seat, trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all complete as per the direction of Engineer-in-charge. |
| 153 | Cleaning of open surface drain lines by removing the deposited and other rubbish from the drain and cleaning the lines by sweeping, rodding and flushing with water upto free flow of drainage system including disposal of deposits out side of compound ,near municipal dumping ground all complete as directed by the Engineer -in- charge. |
| 154 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 155 | 20 mm nominal outer dia. Pipes. |
| 156 | 25 mm nominal outer dia .Pipes. |
| 157 | 32 mm nominal outer dia. Pipes. |
| 158 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 159 | 25 mm nominal outer dia. Pipes. |
| 160 | 32 mm nominal outer dia. Pipes. |
| 161 | 40 mm nominal outer dia. Pipes. |
| 162 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
| 163 | 15 mm dia. nominal bore |
| 164 | 20 mm dia. nominal bore |
| 165 | 25 mm dia. nominal bore |
| 166 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 167 | 25 mm nominal bore |
| 168 | 20 mm nominal bore |
| 169 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 170 | 15 mm nominal bore |
| 171 | 20 mm nominal bore |
| 172 | 25 mm nominal bore |
| 173 | 32 mm nominal |
| 174 | 50mm nominal bore |
| 175 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 176 | Providing and fixing covers for PVC water storage tanks with necessary MS / PVC clamps |
| 177 | For 500 litres capacity tanks |
| 178 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 179 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 180 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 181 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 182 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 183 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 184 | Providing and fixing Stainless Steel grating 0.60mm thick grating for floor traps complete as directed. |
| 185 | 100mm dia Circular |
| 186 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 187 | 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. |
| 188 | 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. |
| 189 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 190 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
| 191 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 192 | 15 mm nominal bore with 45 cm length. |
| 193 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. |
| 194 | 20mm nominal bore. Weighing not less than 40 gms. |
| 195 | 25mm nominal bore. Weighing not less than 62 gms. |
| 196 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 197 | With common burnt clay F.P.S. (non modular) bricks. |
| 198 | Supply of Beldar for misc. work of urgent nature in the compound or wherever required as per direction of Engineer in charge. |
| 199 | Providing and fixing of Stainless Steel towel rail of dia 25 mm with required rawl plug, screws etc. ,all complete as per direction of E-I-C. (a) 600 mm long |
| 200 | Providing and fixing CPVC gate valve/ ball valve (Plastic) of supreme or equivalent make all complete as per direction of Engineer-in-Charge. |
| 201 | Foe 20 mm outer dia pipe |
| 202 | 25 mm Dia . Outer Dia |
| 203 | 32 mm outer dia pipe. |
| 204 | 40 mm Outer Dia . |
| 205 | 50 mm outer dia pipe. |
| 206 | Providing and fixing CPVC Union of Supreme or equivalent make in CPVC pipe including jointing with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. |
| 207 | For 20 mm outer dia pipe |
| 208 | 25 mm Dia Outer Dia |
| 209 | For 32 mm outer dia pipe |
| 210 | Providing and fixing CPVC, MTA / FTA (metal )/Adapter of Supreme or equivalent approved make in CPVC pipe including jointing with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. |
| 211 | Size 20X20 mm |
| 212 | Size 25X25 mm |
| 213 | Size 32X32 mm |
| 214 | Cleaning of chocked G.I./CPVC water supply line by manual or mechanical or gas/ water pressure means including removal of rubbish,sand,earth etc and disposal of same all complete as per direction of Engineer in charge. (A) Dia of pipe 15 mm to 32 mm . |
| 215 | Providing and fixing in position VMD heavy duty manhole cover with frame of required shape, size and approved quality. |
| 216 | 460 X 460 mm (Cover size 400x400 mm) |
| 217 | Size 300X300 mm |
| 218 | Arranging welding machine for welding of Broken steel componants such as Handels, fastners, hinges, grills, etc.as and where required as per the direction of Engineer-in-Charge. (rate includes labour & transportation of machine at site). |
| 219 | Making necessary arrangement of one semi skilled labour for day to day maintenance jobs, bringing in the notice of departmental officers and Making arrangement for upkeeping of BSNL offices & TE Bldg and S/Qtrs at C.T.O compound, Agra by removing chokage of floor traps, rain water, water supply fittings by replacing sockets/elbows/tees, minor repair of cisterns/taps by replacing washers including periodical Cleaning of terrace / spouts / khurras / canopies / blocked chajjas and there spout pipe by removing leaves, grass, dust, rubbish, in CTO compound ,and removing with all other deposited and Uprooting of all undesired grown-up plants over walls at any floor level rates including making all arragement for jhula, ladders, rops, all others necessary tools & equipments etc. complete as per direction of Engineer-in- charge for all BSNL office lying in Agra city. |
| 220 | and includingCTO Compound,Tax Building,TE Building ,Sanjay Place etc complete as per direction of the Engineer-in-charge. |
| 221 | Supply of Carpenter for miscelleaneous urgent carpenter work at site of work or wherever required as directed by Engineer in charge. |
| 222 | Supply of Beldar for miscelleaneous urgent work in the compound wherever required all complete as per direction of E-I-C. |
