|
| 1 | Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed. |
| 2 | M&L for 25 mm thick cement concrete 1:2:4 type B0(using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed. |
| 3 | M&L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishesin cement plaster 1:6 complete all as specified and directed. |
| 4 | M&L for non - skid ceramic tilecoloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed. |
| 5 | M&L for non - skid ceramic tilecoloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surface such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including rendering 10 mm thick on fair facesbrick work or concrete surface in cement plaster 1:4 complete all as specified and directed. |
| 6 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 7 | M&L for rendering 15 mm thick onfair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC ,finished even and smooth (without using extra lime or cement) complete all as specified and directed.(Note:- WPC shall be measured & paid seperately). |
| 8 | Supply onlyliquid water proofing compound complete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6,finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 10 | Demolition of Brickwork or stone/ boulder masonry, built incement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 11 | M&L for Brickworkwith subclass \"B\" bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 12 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggrtegate) as in plinth protection/path and the like including finsihing even & fair complete all as specified and directed. |
| 13 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm each complete all as specified and directed. |
| 14 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed. |
| 15 | S&F for pressed steel frame of size 125 x 60 mm for door with one or more rebates makaing necessary fixing lugs,higes, lock strike plate, etc, complete, as specified, complete all as specified and directed. |
| 16 | M&L for providing cement concrete 1:3:6type C1 ( using 20 mm graded stone aggregate) as filling inside pressed steel frame complete all as specified and directed. |
| 17 | S&F for 35 mm thick factory made shutter, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 18 | S&F for 35mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead or security glass etc.Size of members of shutters as specified in IS-1003 supplied and fitted to chowkhats complete all as specified and directed. |
| 19 | M&L for mild steel work as in bands, straps, clamps, hold fasts, wall tiles, plain angle cleats for securing purlins to wood trusses or refters, and similar samll articles confirming to Fe- 290 Gde E-165 complete all as specified and directed. |
| 20 | S&F in renewal galvanised mild steel wire cloth 0.46 nominal dia of wires and average width of aprature 1.18mm and fixed with tinned tacks , or galvanised wire staples fixedincluding complete all as specified and directed. |
| 21 | S&F for 100 mmbutt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 22 | S&F alumunium handle cast type anodised 150mm long complete all as specified and directed. |
| 23 | S&F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as specified and directed. |
| 24 | S&F aluminumalloyanodized sliding door bolt 300mm long with hasp and staple (bolttype) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed. |
| 25 | M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 26 | M&L forpreparation of new steel surface of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 27 | M&L forfor applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed. |
| 28 | M&L for cutting out cracks to V section in existing walls, roofing or terrace, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed. |
| 29 | S&F for Curtain rod stainless steel decorative type 25 mm diaincluding fixing bracket and end knobs complete all as specified, complete all as specified and directed. |
| 30 | M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc. and applying one coat of cement base paint white or tinted complete all as specified and directed. |
| 31 | M&L for preparing of old surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforecent salt and trading oil and greasy spots plastered or un plastered surfaces of wall including cornices, pilasters etc. and applying two coats of oil emulsion distemper white or tinted complete all as specified and directed. |
| 32 | Complete removal of exiting treatment from externalwall preparation of old plastered surface and applying onecoat of premium acrylic exterioranti algal fungal emulsion paint over one coat of weather coat exterier primer onwall complete all as specified and directed. |
| 33 | M&L applying two coats of distemper oil emulsion white or tinted over and including a layer of 3mm thick wall care putty on wall complete all as specified and directed. |
| 34 | M&L forpreparing old painted wood and wood based surfaces exceeding 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 35 | M&L for100 mm thick cement concrete 1:4:8 type D-2(using40mm graded stone aggregate) as in sub base for floor, finished even and rough complete all as specified and directed. |
| 36 | M&L for sand filling under floors or in foundations including watering andconsolidation complete all as specified and directed |
| 37 | M&L for60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sandcushioning complete all as specified and directed. |
| 38 | S&F for box type steel window with side hung shutters (double shutters for glass and gauze) joinnted together with and including grill using 10 mm square bars @ 10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hunges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed Note : Glass/gauge shall be measured and paid separately der respected item as supply and fix complete all as specified and as directed. |
| 39 | M&L for Dismantling of AC ceiling board any descrition complete all as specified and directed. |
| 40 | S&F for anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle of size 22x22x1.3 mm and Tee of size 35x25x1.3 mm and grid of size 600x600 mm complete all as specified and directed. |
| 41 | M&L for Nonasbestos fibre cement building boards 4mm thickfixed or laid/ inserted to Aluminium anodised frame and hangesframeworkfixed withHangers 3-4 mm dia. G.I. (upto reqd length) adjusting level fixed to roof slabs by means of ceilling cleatscomplete all as specifed and directed |
| 42 | M&L PCC 1:2:4 type B0 (using 12.5 mm graded BT stone aggregate) as in roof kerbs / coping / bed block etc including necessary form work complete all as specified and as directed. |
| 43 | Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. |
| 44 | S&F 0.50 mm thick pre -painted galvatume aluminium zinc coating GI based corrugated steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified colour complete all as specified and as directed. |
| 45 | S&F 0.50 mm thick pre -painted galvatume aluminium zinc coating GI basedplain steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping screws as in ridgespecified, colour complete all as specified and as directed. |
| 46 | Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 47 | M&L, Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410W (Gde-250) quality \"A\" complete all as specified and directed. |
| 48 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plate of Fe-410W (Gde-250) quality \"A\" complete all as specified and directed. |
| 49 | M&L applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10 cm width or girth not other wise described complete all as specified and as directed. |
| 50 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 51 | Taking down ceilingfan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed. |
| 52 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 53 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB\"s of any make/capacity, complete all as specified and directed. |
| 54 | M&L, concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etccomplete all as specified and as directed. |
| 55 | One light point controlled by one switch. |
| 56 | One Ceiling fan point controlled by one switch. |
| 57 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 58 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 59 | Description all as per item No 54 above but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and as directed. |
| 60 | S&F Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 61 | S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 62 | S&F Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 63 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 64 | S&F Modular ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 65 | S&F Modular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 66 | S&FLamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and as directed. |
| 67 | S&F LED Lamp 09/10 watt complete with 5 star rating complete all as specified and as directed. |
| 68 | S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 4000 to 6500Kfitting incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and as directed. |
| 69 | S & F LED of 30 watt security light fittings better optics for uniform distribution IP 65 protectionwith photometric sensor, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60 mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqdlength of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion complete all as specified and as directed. |
| 70 | M&L sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 71 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories,copper winding, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 72 | S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 73 | S&F, MCB SPN63 Amps, 240 volts \"C\" series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. |
| 74 | S&F, MCB SP 240 volts, 6to 32 Amps, \"C\" series 10 KA including connection with suitable size copper lugs.complete all as specified and directed. |
| 75 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core complete all as specified and as directed. |
| 76 | Excavation in trenches n exc. 1.5 m wide and n\" exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 77 | Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed. |
| 78 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 79 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and as directed. |
| 80 | Supplying and laying un reinforced precast concrete cable coverClass LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 81 | S&F tube \"Light\" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 82 | Supply and fix cable jointing kit for 1.1 KVgrade cable for endjoint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and as directed. |
| 83 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded BTstone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in \"D\" shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed. |
| 84 | S&F for modular plate and provising of new modular plate of different size with flush metel boxincluding fixing ,the existing modular switchs , modular socket ,modulare regulator and refixing them in new board complete all as specified and as directed. |
| 85 | White cover plate with frame but 2 module |
| 86 | White cover plate with frame but 3 module |
| 87 | White cover plate with frame but 4 module |
| 88 | White cover plate with frame but 6 module |
| 89 | White cover plate with frame but 8/12 module |
