|
| 1 | Demolition of cement concrete floor tiles (unreinforced) in ground floor and paving not exceeding 15 cm thickness (below or above ground level) incl the disposal upto 50M complete all as specified and directed. |
| 2 | M & L for 100mm Cement concrete 1:4:8type D- 2, (using 40mm graded stone aggregate) complete all as specified and as directed. |
| 3 | M&L for 25 mm thick cement concrete 1:2:4type B0 (using 12.5mm graded stone aggregate) as in leveling course complete all as specified and directed. |
| 4 | M&L for non - skid ceramic tilecoloured 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick in CM (1:6), complete all as specified and directed. |
| 5 | M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in cement plaster 1:6, complete all as specified and directed. |
| 6 | M&L for machine cut kota stone flooring 18 to 20mm thick over & including cement screed base 15mm thick in CM (1.6) laidand jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 7 | M&L for machine cut Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM (1:4)and jointed complete all as specified and directed. |
| 8 | S&F MS rolled section/tubular sections in purling , cross, beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-O or Fe 310-O complete all as specified and directed. |
| 9 | M&L forCutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 10 | Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. |
| 11 | M&L for Glazed ceramic tiles in vertical surface of size350x250x7mm/450x350x7mm thick setand jointed in neat cement slurry and pointed in coloured cement to match, laid over and including rendering 10 mm thick on fair facesbrick work or concrete surface in cement plaster 1:4 complete all as specified and directed. |
| 12 | Dismantling of stone slab and tiles of any description or thickness in floor, aprons etc laid dry and pointed in any mortar complete all as specified and directed. |
| 13 | M&L Granite (of any type) tiles 18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, laid over and including 15mm thick screed in CM 1:4 complete all as specified and directed. |
| 14 | Demolition of Brickwork or stone/ boulder masonry, built incement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 15 | M&L for Brickworkwith subclass \"B\" bricks old size brick, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 16 | Excavating in trenches, n exc 1.5 m wide and exc. 1.5 m in deep and n.exc 3.0m deep for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in soft/loose soil complete all as specified and as directed.(Note: As in foul condition manualy excavation works) |
| 17 | M&L for cutting into existing manholes for connecting new drains of 150 mm internal dia of pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l (using 20mm graded stone aggregate) smooth finished, and reforming benching as required complete all as specified and as directed. |
| 18 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick each layer with soil complete all as specified and as directed. |
| 19 | Removal of excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 mabove the starting point complete all as specified and as directed. |
| 20 | Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and as directed. Note: Demolished material through out of MoD Land rate included above item. |
| 21 | M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as inconcrete bed to drain pipes of 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; including necessary form work complete all as specified and as directed. |
| 22 | S&F for reinforced concrete pipes 150mm bore class NP-2 laid and jointed with collar in CM 1:1 complete all as specified and as directed. |
| 23 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6,finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 24 | Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed. |
| 25 | S&F 0.50 mm thick pre -painted galvatume aluminium zinc coating GI based corrugated steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 26 | S&F 0.50 mm thick pre -painted galvatume aluminium zinc coating GI basedplain steel sheet of an colour haviing tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridgespecified, colour complete all as specified and as directed. |
| 27 | M&L for Dismantling of AC ceiling board any descrition complete all as specified and directed. |
| 28 | S&F for anodised aluminium snap grid frame work for false ceiling consists of powder coated aluminium angle of size 22x22x1.3 mm and Tee of size 35x25x1.3 mm and grid of size 600x600 mm complete all as specified and directed. |
| 29 | M&L for Nonasbestos fibre cement building boards 4mm thickfixed or laid/ inserted to Aluminium anodised frame and hangesframeworkfixed withHangers 3-4 mm dia. G.I. (upto reqd length) adjusting level fixed to roof slabs by means of ceilling cleatscomplete all as specifed and directed |
| 30 | S&F GIwire netting 0.90mm dia and 12mm mesh lathingto wood or metal studding, joists etc in walls , ceiling , stanchions, beams etc including all laps, cutting and waste complete all as specified and as directed. |
| 31 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 32 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement plaster 1:6,finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 33 | M&L for rendering 15 mm thick onother than fair faces of brick work or concrete surfaces in cement plaster 1:4 and mixed with WPC ,finished even and smooth (without using extra lime or cement) complete all as specified and directed.(Note:- WPC shall be measured & paid seperately). |
| 34 | Material & Labour for new plastered surfaces applying two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces including a 1mm thick wall care putty on wall complete all as specified and directed |
| 35 | M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 36 | M&L for preparation of the newly plastered surfacesof ceiling & applying3 coats of white wash on ceiling surfaces complete all as specified and directed. |
| 37 | M&L for new plasterd surface applying two coats of distemper oil emulsion white or tinted over and including a layer of 1mm thick wall care putty on wall complete all as specified and as directed. |
| 38 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) size n.exc 1.50 Sqm each complete all as specified and directed. |
| 39 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) size exc 1.50 Sqm but n exc 4 sqm each complete all as specified and directed. |
| 40 | S&F in renewal Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 41 | S&F in renewal Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proofand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 42 | S&F for pressed steel frame of size 125 x 60 mm for door with one or more rebates makaing necessary fixing lugs,higes, lock strike plate etc complete all as specified and as directed. |
| 43 | S&F for 35mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead or security glass etc.Size of members of shutters as specified in IS-1003 supplied and fitted to chowkhats complete all as specified and directed. |
| 44 | S&f35mm thick flush shutters, soild core construction with block board core and plywood face panels, commercial type on both sides, decorative laminate type 1 of 0.9mm thick surface finish colour and pattern as approved fixed with approved adhensive as manufacture\"s complete all as specified and directed |
| 45 | S&F ECO 4000 series windows/ventilators (Double rebate) fabricated from roll formed section made of galvanised steel colour coated/powder coated (Base steel as per IS 513 \"D\"quality, Galvanized as per IS 277 with zinc of 120 grams/sqmt with total coated thickness of 0.60mm coated section should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with polyester paint of 12-16 microns thick or powder coated with pure polyester upto 50-60 micron thick. section for frame should be 72mmX55mm, section for mullion should be of 72mm X50mm section for Glazed shutter frame should be of 47mmX20mm and section for fixed glass bead should be 12mmx12mm section for fly mesh should be of 40mm X20mm.Section for frame Glazed shutter and mesh shutters should be cut to length and miter joined with polypropylene corner brackets. mullions section should be joined with frame/mullion using mullion cap Ethyl propylene diamine monomer (EPDM) gasket should be used all around glass in shutter and fixed glass and including grill of same material . Spoon profile should be used around fly mesh to fix mesh in mesh shutter. Each glazed shutter and mesh shutter should be provided with SS pivot hinges -I set, seccolor stay. window frame should be fixed to brick/concrete masonryby using nylon self-expanding caps and drivingMS electroplated 80mm longscrews into the caps through frame complete all as specified and as directed. |
| 46 | S&F 4.8 mm thicksheet glass, ordinary quality and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane forwindow, door, ventilator complete all as specified and directed. |
| 47 | S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 48 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frame/metal frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 49 | S&F for 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pan complete all as specified and directed. |
| 50 | S&F for galvanised mild steel wire cloth 0.46 nominal dia of wires and average width of aprature 1.18mm and fixed with tinned tacks galvanised wire staples fixedincluding a coat of french blue paints complete all as specified and as directed. |
| 51 | S&F for 150 mm aluminium anodised, barrel tower bolts of extruded sectionand fixed complete all as specified and directed. |
| 52 | S&F for extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and directed. |
| 53 | S&F for 100 mmbutt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 54 | S&F aluminumalloyanodized sliding door bolt 300mm long with hasp and staple (bolttype) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed. |
| 55 | S&F in renewal 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 56 | M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 57 | M&L forpreparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 58 | M&L forfor applying one coat of synthetic enamel paint on old steel & iron surfaces (previously decorated) for grills, guard bars of any description not otherwise described over 10cm in width or girth including preparation of old surfaces complete all as specified and as directed. |
| 59 | S&F decorative stainless steel mild steel powder coated 25mm dia, minimum thickness 2 mm curtain rod with powder coated side fixing brackets, rings and decorative knobs complete all as specified and directed |
| 60 | M&L for providing cement concrete 1:3:6type C1 ( using 20 mmgraded stone aggregate) as filling inside pressed steel frame complete all as specified and directed. |
| 61 | Supply only integral liquid water proofing compound (ISI marked) complete all as specified anddirected. |
| 62 | M&L hard core of for broken stone boulder of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick each layer watered and rammed to a true surfaces complete all as specified and as directed. |
| 63 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection/path and the like including finsihing even & fair complete all as specified and directed. |
| 64 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed. |
| 65 | M&L for Providing precast cement concrete 1:3:6 type C-0 (using 12.5mm graded stone aggregate) in window, doors, cills, lintes., string courses , coping etc. (Type C-1). (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified and as directed. |
| 66 | M&L for100 mm thick cement concrete 1:4:8 type D-2(using 40 mm graded stone aggregate), as in sub base for floor, finished even and rough complete all as specified and directed. |
| 67 | M&L for sand filling under floors or in foundations including watering andconsolidation complete all as specified and directed |
| 68 | M&L for60 mm thickness rubber moulded machine pressed precast concrete interlocking paver block M-35 any shape and size, confirming to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sandcushioning complete all as specified and directed. |
| 69 | S&F in renewal Stop valve, cast copper alloy, screwed down high pressure with capston headed handle chromium plated angular type screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed. |
| 70 | S&F in15mm bore bib taps, fancy type chromium plated cast copper alloy with capaston head handle, screwed down screwed iron pipe or for brass ferule fixed, complete all as specified and directed. |
| 71 | S&F in renewal PVC connection 15mm sizewith PTMT nuts on both endsof length 450 mm complete all as specified and directed. |
| 72 | S&F in renewal swivel shower of brass chromium plated of size 125mm for fixing with 15mm bore pipe complete all as specified and directed. |
| 73 | S&F in renewal tabular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and directed. |
| 74 | S&F in renewal grating 100/125 mm dia of PTMT, fixed to Nahani trap complete all as specified and directed. |
| 75 | S&F in repair wash hand basin vitreous china (flat back) of size550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends complete complete all as specified and directed. |
| 76 | S&F in renewal32 mm waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly -nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 77 | S&F in renewal 15mm dia pillar taps fancy type,cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered \"Hot or Cold\" with long screwed shanks and fly -nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 78 | Dismantling of water tank exceeding 250 Ltrs but not exceeding 500 Ltrs complete all as specified and directed. |
| 79 | S&F forrotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litres hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 80 | S&F in renewal vitreous china squatting pan \"(Orrissa\" pattern) of size 580 x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 81 | S&Fin renewal PVC flushing cistern of 10 Ltrs capacity including all fitting flush pipe etc complete all as specified and directed. |
| 82 | S&Fin repair 600x450mm beveled edges mirror of selected quality mounted on 6mm thick AC building board or plywood fixed to wall with rawal plug and screws complete all as specified and directed. |
| 83 | S&F in renewal Brass CP mixer for basin mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 84 | Taking down steel tubing and connection 15m bore incl cleaning for refixing or removing from site complete all as specified and directed. |
| 85 | ~ Ditto ~ all as in item No. 84 above here in beforebut 20 mm dia pipe complete all as specified and directed. |
| 86 | M&L for GI tubing 15mm dia medium grade galvanised with all fittingsfixed to wall and floor complete all as specified and directed. |
| 87 | ~Ditto~ all as in item No.86 above here in beforebut 20 mm dia pipe complete all as specified and directed. |
| 88 | Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc), bore of pipe 15 mm complete all as specified and directed. |
| 89 | Refixing old steel tubing and connections in new or old positions (walls, ceiling, floor etc), bore of pipe 20 mm complete all as specified and directed. |
| 90 | S&F of Glass Corner ,size nexc 250mmwith CP bracket complete all as specified and directed. |
| 91 | S&F in renewal Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 92 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed. |
| 93 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 94 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 95 | S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 96 | S&FPVC (SWR) bends any radius, 110mm bore, complete all as specified and directed. |
| 97 | S&FPVC (SWR) bends any radius, 75mm bore, complete all as specified and directed. |
| 98 | S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore,complete all as specified and directed. |
| 99 | S&F PVC (SWR) junction single (single T), equal or unequal, 75mm bore,complete all as specified and directed. |
| 100 | M&L for Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as specified and directed. |
| 101 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 102 | Taking down fan, sealing cable end,dismantling blades and removing fan and blades than depositto E/M yard store complete all as specified and as directed. |
| 103 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 104 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB\"s of any make/capacity, complete all as specified and directed. |
| 105 | Taking down unserviceable TPN DBwith MCB\"s of any make/capacity, complete all as specified and directed. |
| 106 | M&L concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etc complete all as specified and directed. |
| 107 | One light point controlled by one switch. |
| 108 | One Ceiling fan point controlled by one switch. |
| 109 | One Exhaust fan point controlled by one switch. |
| 110 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 111 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board complete all as specified and directed. |
| 112 | Description all as per item No 106 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and directed. |
| 113 | S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed. |
| 114 | S&F socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed. |
| 115 | S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed. |
| 116 | S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed. |
| 117 | S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed. |
| 118 | S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 119 | S&FLamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed. |
| 120 | S&F LED Lamp 09/10, efficiency > 130 lumen/wattwatt with 5 star rating complete all as specified and directed. |
| 121 | S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500Kfitting ,Efficiency >130 lumen /watt incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. |
| 122 | S&F LED of 30 watt security light fittings better optics for uniform distribution IP 65 protectionwith photometric sensor, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqdlength of 1.5 Sqmm PVC multistranded BIS marked, 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. |
| 123 | M&L sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 124 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed. |
| 125 | Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep copper winding with louve complete all as specified and directed. |
| 126 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories,copper winding, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 127 | S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 63 Amp,4 pole &with suitable size of busbar including 12 nos MCB SP 32 Amps complete,fixed flush in wall including chases wall for fixing DB and making goodthe distributed wall surfaces to match with existing specification including taking down complete all as specified and directed. |
| 128 | S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 129 | S&F MCB DB, sheet metal enclosures double door SPN 4 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 130 | S&F MCC\"B 415V16 KA , 4 Pole 63 Amp including connection with suitable size copper lugs complete all as specified and directed. |
| 131 | S&F MCB SPN40 Amps, 240 volts \"C\" series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. |
| 132 | S&F MCB SP 240 volts, 6to 32 Amps, \"C\" series 10 KA including connection with suitable size copper lugs.complete all as specified and directed. |
| 133 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 35 Sqmm 3.5 Core inclu taking down complete all as specified and directed. |
| 134 | M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm twin core inclu taking down complete all as specified and directed. |
| 135 | Excavation in trenches n exc. 1.5 m wide and n\" exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 136 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed. |
| 137 | Supplying and laying un reinforced precast concrete cable coverClass LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 138 | S&F tube \"Light\" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 139 | Supply and fix cable jointing kit for 1.1 KVgrade cable for endjoint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type complete all as specified and directed. |
| 140 | Taking out old u/s pipe line alongwith fittings from existing connections of size 25 mm dia complete all as specifies and directed. |
| 141 | Taking out old u/s pipe line alongwith fittings from existing connections of size 20 mm dia complete all as specifies and directed. |
| 142 | M&L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and directed. |
| 143 | M&L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenchescomplete all as specified and directed. |
| 144 | S&F in renewal 25 mm Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts fixed at any location of size 25 mmm dia complete all as specified and directed. |
| 145 | S&F in renewal 20 mm Brass Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts fixed at any location of size 20 mm dia complete all as specified and directed. |
| 146 | Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normalground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point and connect green wire for earthing all as specified including testing on completion and provision of earthing chamber in bricks wall size 45x45x15 cm and having PCCcover of required size complete all as specified and directed as per IS 3034(1981). |
| 147 | Supply and fix desert cooler electric driven (single phase) , having nominal air flow capacity of 4000 Cum perhour (or nearest size). (Steel body) complete all as specified and directed. |
