Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position (un-reinforced) in ground floors and paving not exceeding 15cm thick (below or above GL) complete all as specified and directed. Note: Demolished material through out of MoD Land rate included above item. |
| 2 | Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. |
| 3 | Dismantiling of stone slabs and tiles of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 4 | M&L for50mm thick PCC (1:3:6) Type C2(using 40mm graded stone aggregate) as in plinth protection/floor finishes surface even and fair without using extra cement complete all as specified and as diected |
| 5 | M&L for vitrified, coloured and printed tiles oflight shade, 8 to 10 mm thick (Square/Rectangular ) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in flooring over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 6 | M&L for vitrified, coloured and printed tiles oflight shade, 8 to 10 mm thick (Square/Rectangular ) polished area of each tiles not exceeding 0.36 sqm as in flooring over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 7 | M&L for vitrified, coloured and printedtiles of width as directed and8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 8 | M&L for Non skid ceramic coloured tiles7 to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 9 | M&L for glazed digital cearmic tiles, coloured tiles of size 450x350x 7 to 8 mm thickon vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over, approved designer style wall tile pattern over and including 10 mm thick backing coat in cement mortar (1:4)completeall as specified and directed. |
| 10 | M&L for Granite slab18 to 20 mm thick machine cut, bedded and joined withcementand pointed with white cement (1:2) using marble dust with admixture of pigment to match over and including 20 mm thick screed bedCM (1:3) the shade of granite stone including cutting and polishing type as incill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all asspecified and directed. |
| 11 | M&L for applying the non shrink high mechanical strength properties epoxy based mortar @ 5kg/RM on all corner joints of wall, chajja, facade any other similar places to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler havingER Base and Hardener with Quartz filler etc complete all as specified & directed |
| 12 | Taking down of old roof treatment of any description including mud phushka, concrete padding, tiles, cement plaster from roof surfaces (of any thickness) etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc. 250 mtr and not exc 500 mtr from the roof etc complete all as specified and directed. |
| 13 | M&L for Plain cementConcrete 1:2:4type B-0 ( using 12.5mm graded stone aggregate) 25mm thick average as in roof padding/ levelling finish even and smoothetc complete all as specified & directed. |
| 14 | M&L for Providing cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges or water tank staging, coping etc finished even and smooth complete all as specified and directed. |
| 15 | M & L for applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof: water) and other coats to be applied undiluted. (ii) The undiluted 2nd & 3rd coatings needs to be reinforced with 40 GSM geotextile to be sandwiched between them. (iii) After that final 4th coating shall be applied.The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and as diectedNotes:-(a) The work shall be executed through authorised applicator of manufacturer only.(b) Authrised Applicator shall be approved by GE before starting of work.(c) All materials shall be procured directly form manufacturer.(d) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of GE. |
| 16 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 17 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 18 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar (1:4).complete all as specified and as directed. |
| 19 | M&L for PCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in coping, in lintels upto1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, staging, slightly rounded or chamfered on edges, angles, kerbs and throating in roof as directed complete all as specified and directed. |
| 20 | M&L for applying bonding agent for bonding old to new concrete surface likes chajja/ beam/ceiling/facia etc by high performance modified Styene- Butadiene Rubber (SSR) base binder and applying of binder is as 10 Sqm/ per lits etc complete all as specified & directed. |
| 21 | M&L for applying 25 mm thick (average) repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja and facia/ ceiling, mortar having good compressive strength and shrikage resistance etc complete all as specified & directed. |
| 22 | Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. Note: Demolished material through out of MoD Land rate included above item. |
| 23 | M&L for 12 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 24 | M&L for rendering 15mm thick in cement mortar 1:4on fair faces of brick work or concrete surfaces, mixed with water proofing compoundfinished even and smooth without using extra cementcomplete all as specified and directed. Note : (i) The quoted rate is inclusive of necessary scaffolding works. (ii) WPC shall be measured and paid seperately. |
| 25 | M&L for 5mm thick rendering (1:3) on fair faces of brick work or concrete surfaces of ceiling/chajja/fascia etc finished even and smoth without using extre cement complete all as specified and directed. |
| 26 | Supply only liquid water proofing compound @ 200 ml per 50 kg of cement complete all as specified and as diected |
| 27 | M&L for preparation of new plastered surface of wall and applying two coats of plastic emulsion paint, over a coat of internal primer and incl a layer of2mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, with roller complete all as specified and as directed. |
| 28 | M&L for preparation of new plastered surfaces of wall and applyingthree coats of white wash with roller complete all as specified and directed. |
| 29 | M&L fo preparation of new plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces with roller complete all as specified & directed. |
| 30 | M&L for preparation of new plastered surfaces of wall and applyingtwo coats of cement base paint over a coat of primer complete, colour of paint with roller complete all as specified and directed. |
| 31 | M&L for preparation of new plastered surfaces of ceiling and applyingthree coats of white wash with roller complete all as specified and directed. |
| 32 | M&L for complete removal of existing treatment of plastered or unplastered surfaces of walls and applying one coat of wall texture painting of Asian paints Royal play special effects or equivalent in Berger/ Nerolac paints over two coats of Royal play emulsion of Asian paints and over a coat of internal wall primer over and incl a layer of2mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall with roller, complete all as specified and as directed. |
| 33 | M&L forcomplete removal of existing treatment of plastered or unplastered surfaces of walls and applying two coats of plastic emulsion paint, over a coat of internal primer and incl a layer of2mm thick wall care putty with roller to get even and smooth complete all as specified and as directed. Make : Asian paints/ berger/ Nerolach level finish on new plastered surface of internal wall. |
| 34 | M&L for complete removal of existing treatment of plastered or unplastered surfaces of walls andapplying two coat of white wash with roller complete all as specified and directed. |
| 35 | M&L for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces with roller complete all as specified and as diected |
| 36 | M&L for complete removal of existing treatment of plastered or unplastered surfaces of ceiling andapplying two coats of white wash with roller complete all as specified and directed. |
| 37 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square metre each complete all as specified and as directed. |
| 38 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed. |
| 39 | S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lockstrike plate, etc. complete all as specified and as diected |
| 40 | S&F Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lockstrike plate, etc. complete all as specified and as diected. |
| 41 | M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate)for filling in hollow section of pressed steel frames and like complete all as specified and directed. |
| 42 | S &F of 30mm thick Flush shutters, soild coreconstruction, with paticle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 43 | M & L for 35 mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to receive glass, guage etc (without sash bars) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters complete all as specified and as diected |
| 44 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position including with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed. |
| 45 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm (Double rebate) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position including with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeetc complete all as specified and directed. |
| 46 | S&F for factory made single extruded WPC (Wood polymer composite) solid decorative type Flush door shutter of size 30mm thick comprising of virgine polymer of K value 5868 ( Suspension Grade), calcium carbonate and natural fiber( wood powder/ rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strenght of 1800 N ( Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminaed with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with 100mm long stainless steel butt hinges04 Nos with necessary full body threaded star headed counter sunk s.s screws, complete all as per specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 47 | S&F for factory made single extruded WPC (Wood polymer composite) solid decorative type glazed and skeleton door shutter of size 30mm thick and prepare to receive SS wire mesh cloth etc, comprising of virgine polymer of K value 5868 ( Suspension Grade), calcium carbonate and natural fiber( wood powder/ rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 of 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strenght of 1800 N ( Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminaed with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with 100mm long stainless steel butt hinges04 Nos with necessary full body threaded star headed counter sunk s.s screws, complete all as per specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 48 | S&F of solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed. |
| 49 | All as per item No 48 but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to matchwithprelam sheet complete all as specified and as directed. |
| 50 | S &F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 51 | All as per item No 50 but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 900 bent edge complete all as specified and as directed. |
| 52 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 53 | M&L for Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and as diected. |
| 54 | S&F of factory made UPVC white colour Sliding window Three track of area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as diected. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connectedaccessories. Net Opening will be measured lor payment purpose). |
| 55 | S&F 5.5 mm thick tinted glassof selected qualityin squareexceeding 0.5 sqm in each pane, fixed to UPVC/aluminum frame with and including suitablerubber beadingcomplete all as specified and directed |
| 56 | S&F of 12 mm thick toughened Glass doors with necessary stainless steel fixing patches and lock patches/ door floor springs etc fixed to wall/floor complete all as specified and as directed. |
| 57 | S&F of \"D\" type stanless steel handle decorative type 300mm long bright finished all as per design/ pattern approved by Engineer-in-Charge fixed to toughened glass door complete all as specified and as directed. |
| 58 | S&F of 3mm thickFigured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, fixed to PVC / Aluminum or any kind of frame with and including suitablerubber beadingcomplete all as specified and directed |
| 59 | S&F ofStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 60 | S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, ceilings and similar work conforming to Fe 290,E-165, complete all as specified and directed. |
| 61 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 62 | M&L preperation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer onnew wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and directed. |
| 63 | S&F of 100 mm long Stainless steel Butt hinges heavy weight premium quality complete all as specified and directed. |
| 64 | S&F of cast brass, Butt hinges, 100mm with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed. |
| 65 | S&F of Brass barrel tower bolts, 200mm with cast or sheet barreland rolled or cast bolts and fixed complete all as specified and directed. |
| 66 | S&F of Brass, sliding door bolt 300mm with sand or die-cast brass hasp, staple (bolt type) and fixing boltwith rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 67 | S&F of floor door stopper of brass body and tongue overall length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and directed. |
| 68 | S&F of Door closer, Aluminium (Extrued section) body hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 69 | S&F of Brass peg set of Hat and coat hooks (minimum 6 hooks), solid body, 175mm to 250 mm including suitable wooden frame and fixed to wall with PVC plugs and screw, complete all as specified and directed. |
| 70 | S&F in renewal 25mm dia premium quality stainless steelcurtain rod not less than 0.80mm thick including sufficient fixing SS brackets & decorative end Knobs, 10 Nos SS rings in one Rmtr (minium 2 Nos at every 1.50m length or for every separate piece of rod fixed) complete all as specified and directed. |
| 71 | S&F 100mm long Butt hinges, aluminium hinges complete all as specified and directed |
| 72 | S&F of 300 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed |
| 73 | S&F for extruded aluminium alloy handle of 150 mm size fabricatedtype, anodised complete all as specified and as diected |
| 74 | S&F for aluminium anodised barrel tower bolts of extruded section of 200mm size, complete all as specified and directed. |
| 75 | S&F for aluminium anodised barrel tower bolts of extruded section of 150mm size, complete all as specified and directed. |
| 76 | S&F of Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as diected |
| 77 | S&F 150mm size Floor door stopper of aluminium alloy body and tongue, anodised overall length of cover plate with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 78 | S&F of aluminum handles cast type, anodized of 100 mm size complete all as specified and directed. |
| 79 | M&L for 75mm thick PCC (1:3:6) Type C2(using 40mm graded stone aggregate) as in plinth protection/hard standing and floor finishes surface even and fair without using extra cement complete all as specified and as diected |
| 80 | M&L for Forming Construction joint 30mm deepx10mm wide filled with sealing compound grade A complete all as specified and as diected. |
| 81 | Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed. |
| 82 | S&F of Gl frame work for seamless ceiling, grid of size 605 x 605mm, comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as diected. |
| 83 | S&F of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat of size 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long for grid of size 605 x 605mm complete all as specified and as diected. |
| 84 | S&F of Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and as diected |
| 85 | S&F of false ceiling at all heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of semi perforated 12mm thick micro tegular edged GRG of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and as diected |
| 86 | Dismantling boarding any description fixed with nails in any position (including cup board/ wardrobe shutters/shelves upto 25mm thick) complete all as specified and as diected. |
| 87 | S&F of 18 mm thickPVC Celuka ply of both side prelaminated and other side plain white colour fixed with SS screws/ sealant/ solvent cement /adehesive for cabinet boxex and shitters purpose including cutting , joining, fixing glass etc & marking goodcomplete, colour and pattern complete all as specified and as diected.Note : Glass for cabinets will be measured and paid seperately as supply only item. |
| 88 | S&F of 12 mm thickPVC Celuka ply of both side prelaminated and other side plain white colour fixed with SS screws/ sealant/ solvent cement /adehesive for cabinet boxex and shitters purpose including cutting , joining, fixing glass etc & marking goodcomplete, colour and pattern complete all as specified and as diected.Note : Glass for cabinets will be measured and paid seperately as supply only item. |
| 89 | S&F of stainless steel (SS 304 grade) perforated cutlery rack of length 20\" to 22\", width of 14\" to 16\" and height of 4\" to 6\" including supporting telescopic ball bearing channels of 10\" length on both sides of rack, complete all as specified and directed. |
| 90 | S&F of stainless steel (SS 304 grade) plate rack of length 20\" to 22\", width of 14\" to 16\" and height of 8\" including supporting telescopic ball bearing channels of 10\" length (payload capacity of 45kgs) on both sides of rack, complete all as specified and directed. |
| 91 | S&F of stainless steel (SS 304 grade) multipurpose container rack of length 20\" to 22\", width of 14\" to 16\" and height of 15\" to 18\" including supporting telescopic ball bearing channels of 10\" length (payload capacity of 45kgs) on both sides of rack, complete all as specified and directed. |
| 92 | S&F of modular soft close SS hinges of any degree opening, complete as specified and as directed. |
| 93 | S&F of modular stainless steel handle 200mm complete all as specified and directed. |
| 94 | S&F of modular stainless steel handle 150mm complete all as specified and directed. |
| 95 | S&F of aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed. |
| 96 | S&F of heavy duty Mild steel tee hinges, stove enamelled black, 150mm size complete all as specified and directed. |
| 97 | S&F of Mortice latch with two levers (vertical type), 100mm sizemild steel body and fixed complete all as specified and directed. |
| 98 | S&F of heavy duty stainless steel magnatic door catcher and striking plate,including fixed with SS screw, complete all as specified and directed. |
| 99 | S&F for Brass knobs 35-40mm dia complete all as specified and directed. |
| 100 | S&F for Brass continuous (piano) hinges width of flaps nexc 30 mm (when open), complete all as specified and directed. |
| 101 | S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size fixed with screw complete all as specified and as diected. |
| 102 | S&F in renewal plate rack of size 900mmx750mm made out of 1mm thick stainless steel sheet of 304 AISI grade of wire type / sheet patternsize and type as directedand approved by GE fixed to wall with necessary SS screws/plugs/brackets etc fitting arrangement Complete all as specified and directed. |
| 103 | S&F in renewal sinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl of size 410mm x 330mm x 160mm complete all as specified and directed. |
| 104 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and as diected. |
| 105 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and as diected. |
| 106 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 25/ 32mm bore of pipe complete all as specified and as diected |
| 107 | Supply and laying of 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as diected. |
| 108 | Supply and laying of 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as diected. |
| 109 | Supply and laying of 32mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as diected. |
| 110 | Supply and laying of 16mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified and as diected |
| 111 | Dismantling of water tanks exc 250 ltr and n.exc 500 ltr capacity and removing from site complete all as specified and as directed. |
| 112 | Dismantling of water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed. |
| 113 | S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and as directed. |
| 114 | S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and as directed. |
| 115 | S&F in renewal 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and directed. |
| 116 | S&F in renewal for gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed. |
| 117 | S&F in renewal for gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 25mm bore complete all as specified and directed. |
| 118 | S&F in renewal for vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps and connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed. |
| 119 | S&F in renewalvitreous china urinals, Half stall type ,whitewith grating and union for discharge pipecomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. |
| 120 | S&F for in renewal urinal Spreader chromium plated, cast copper alloy, with brass ceramic disc spindleand capston heads,scewed down high pressurefor iron pipe fixed and complete all as specified and as diected. |
| 121 | S&F in renewal for PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. |
| 122 | Supply and fix in renewal flush pipe fixed to pedestal pan, incl all joints, of polythylene of low or high denisity or PVC 32 mm dia for low level cistern complete all as specified and as diected |
| 123 | S&F for in renewal 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe fixed and complete all as specified and as diected. |
| 124 | S&F in renewal for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed. |
| 125 | S&F for in renewal 15mm, pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified and as diected. |
| 126 | Dismantling of shower enclosures of any type carefully along with all fixture and fittings etc and refixing the same in same position, rate is inclusive of necessary SS screws or any other fixing arrangement required for refixing complete all as specified and as directed. |
| 127 | S&F for in renewal premium quality looking mirror of bevelled edge of mounted stainless steel frame with selected quality glass fixed to wall with stainless steel screws complete, shape and design complete all as specified and as directed. |
| 128 | S&F in renewalFloor mounted one piece (Including Flushing Cistern) pedestal pattern water closet with soft closing seat cover and inbuilt flush tank complete all as specified and as diected. |
| 129 | S&F for in renewal of vitreous china wash basin, counter top type, premium quality, white/black, flat back, of size 550mm x 400mmexcluding taps, waste, chain and plug andporcelainstopper but including cutting for and pinning in ends of and including brackets complete, design & colour complete all as specified and as diected. |
| 130 | S&F in renewal Brass chromium plated bottle traps, bore of trap 40mm for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as diected. |
| 131 | S&F for in renewalwaste couplingfittings , brass chromium plated for glazed ware sinks ,basins ,etc.with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified and as diected. |
| 132 | S&F in renewal 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, strached length 90cm with PVC coupling socket complete all as specified and directed |
| 133 | S&F in renewal for 15mm dia PVC connection with PTMT nuts of length 450 mm, heavy duty, steel wire mesh coated complete all as specified and directed. |
| 134 | S&F in renewal for15mm dia PVC connection with PTMT nuts of length 600 mm, heavy duty, steel wire mesh coated complete all as specified and directed. |
| 135 | S&F for in renewal mild steel Chromium plated grating 100 mm dia, fixed in repairs to Nahani traps, complete all as specified and directed. |
| 136 | S&F for in renewal for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unionscomplete all as specified and directed. |
| 137 | S&F for in renewal for 15mm, bib tapFancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified and as diected. |
| 138 | S&F for in renewalPVC bath room cabinet mirror of Size 500mmx400 mm makePrayag Cat No 556or euivelent in other make completeall as specified and directed. |
| 139 | S&F in renewal sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and directed. |
| 140 | S&F in renewal corner glass shelf 300mm (with ABS Bracket ) complete all as specified and directed. |
| 141 | S&F for in renewal Soap dish of CP fixed with PVC rawal plugs and screw, complete all as specified and directed. |
| 142 | S&F for in renewal brass cromium platedtubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. |
| 143 | S&F for in renewal brass cromium platedtowel ring including fixing with SS screw and cleats etc complete all as specified and directed. |
| 144 | S&F in renewal for shower rose brass chromium plated without swivel joints, 300x300 mm in size including shower arm sufficient length for fixing to steel pipe complete all as specified and directed. |
| 145 | S&F in renewal for wall mixer with Three in one pattern in of brass CP, 15mm dia with telephonic shower hose with hand shower complete all as specified and directed. |
| 146 | S&F in renewal Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and as diected |
| 147 | S&F in renewal single lever Sink Mixer with Swinging Spout on Upper Side (wall Mounted Model) with connecting Legs & Wall Flangers for 15mm bore iron pipe complete all as specified and as diected. |
| 148 | S&F for in renewalHealth Faucet (ABS Body) mild steel chromium plated 15 mm diawith 1.25 meter PVC flexible bodypipe of CPincluding fixing bracket, complete all as specified and directed. |
| 149 | S&F in renewal Toilet paper holder, premium quality, with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 150 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bend, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as diected |
| 151 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as diected. |
| 152 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and as diected. |
| 153 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as diected |
| 154 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as diected |
| 155 | S&F for 110mm dia PVC (SWR) pipe bends any radious complete all as specified and directed. |
| 156 | S&F for 75mm dia PVC (SWR) pipe bends any radious complete all as specified and directed. |
| 157 | S&F for 110mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified and as diected |
| 158 | S&F for SWR bends 75mm provided with access door complete all as specified and as diected |
| 159 | S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and as diected |
| 160 | M&L for PVC (SWR) gully trap 125 /100plain with gratingincl. jointing with solvent cement as in repair, complete all as specified and directed. |
| 161 | S&F Stack clamps made out of50 mm by 5 mm flat iron and 16 mm dia around iron stays including boltand nuts for securingends of stays to walls or roofs, bore pipe 100 mm dia pipe complete all as specified and as directed. |
| 162 | S&F Stack clamps made out of50 mm by 5 mm flat iron and 16 mm dia around iron stays including boltand nuts for securingends of stays to walls or roofs, bore pipe 75 mm dia pipe complete all as specified and as directed. |
| 163 | M&L for chequered cement concrete tiles of size 20cmx20cmx25 mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in cm (1:6) complete all as specified and directed. |
| 164 | M&L for 75 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregate), asfloor surfaces complete all as specified and directed. |
| 165 | M&L for preparation of old chequered tile/ paver block surfaces/ existing footpath by removing all caked mud with wire brushes and cleaning the surfaces with necessary acid and description not otherwise described and applying one coat of weather proof tile guard apex paint or equivalent of any colour complete all as specified and as directed. |
| 166 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 167 | Taking down ceiling fan/exhaust fanof any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed. |
| 168 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 169 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB\"s of any make/capacity complete all as specified and as diected. |
| 170 | Taking down unserviceable TPN/VTPN DBwith MCB\"s of any make/capacity, complete all as specified and directed. |
| 171 | M&L concealed point wiring with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etc complete all as specified and directed. |
| 172 | One light point controlled by one switch. |
| 173 | One Ceiling fan point controlled by one switch. |
| 174 | One Exhaust fan point controlled by one switch. |
| 175 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 176 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 177 | One Bell point controlled by one way 5 Amp push button switch. |
| 178 | Description all as per item No 171 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire complete all as specified and as diected . |
| 179 | M&L in renewal Modular switch 1 way 6 A,1 module complete all as specified and directed. |
| 180 | M&L in renewal Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 181 | M&L in renewal Modular switch 1 way 16 A,1 module complete all as specified and directed. |
| 182 | M&L in renewalModular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 183 | M&L in renewal modular bell push flush type, 5 Amps complete all as specified and directed. |
| 184 | M&L in renewal Ding Dong Bell, AC, 230 Volts, single pole complete all as specified and directed. |
| 185 | M&L in renewalceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 186 | M&L in renewalModular Fan step regulator, 120W - 2 module 240 volts, AC 50Hz complete all as specified and directed. |
| 187 | M&L in renewal LED Lamp 09/10 watt with 5 star rating complete all as specified and directed. |
| 188 | M&L in renewalIndoor decorative bulb holder with contemporary sleek design ,antique surface mounted colour Brush Bronze material aluminium & mild steelcomplete all as specified and as diected |
| 189 | M&L in renewal LEDMirror tube light fitting 2 ft,100 lumen/watt,20 watt ,4000k to 6500kcomplete all as specified and as diected. |
| 190 | M&L in renewal Decorative ultra slim LED Tubelight 20W LED Batte LED Tubelight ,colour 6500k TO 4000k as per requirement, fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, fittingreqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion, complete all as specified and as diected |
| 191 | M&L in renewalSmart wifi smart 20W CCT-RGB LED smart tubelightwith music sync function,compatible with amazon alexa and google assistent,16M Colour +Dimmable , enviormental friendly energy efficient ready to use, 20 watt, fittingreqd length of not less than 1.0 Sqmm PVC multistranded03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 192 | M&L in renewal LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC,colour 6500k TO 4000k as per requirement ,recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete as per specified and directed. |
| 193 | M&L in renewal decorative surface mounted hexagonal bulk head Back-lit LED luminair comprising of high brightness LEDsIP 66 protection LED of 10 watt including reqdlength of 1.5 Sqmm PVC multistranded 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion, complete all as specified and as diected |
| 194 | M&L in renewal LED Outdoor/Indoor UP Down Wall Light Warm White, IP-65 Rainproof & Shockproof Alluminium Body (4 Way Splitter) (Metal) complete all as specified and as diected |
| 195 | M&L in renewal Solar LED Bollard/Pathway Lamp BIS Approved IP66 Water proof Bollard Landscape Lamp with 800mAh Ni-MH Battery & Panel Decoration LED Spotlight for Walkway 2.5 ft Height including all accesseries Lighting Color -Warmcomplete all as specified and as diected |
| 196 | M&L in renewal sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 197 | M&L in renewal sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 198 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) with wireless remote control complete all as specified and as diected. |
| 199 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mcomplete all as specified and as diected. |
| 200 | Supply and fix automatic hand drier for bathroom,AC single Phase. 230V ,ABS Plastic Commercial Hand Dryer ,Touchless Wall Mounted, Quick Dry 40s, Energy Efficient, Durable Heavy Duty Machine for Offices & Washrooms complete all as specified and as diected |
| 201 | M&L in renewal sheet metal enclosure double door in white colour , distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 160 Amp,4 pole & Including MCCB 160 amps 4 pole 16 KA complete with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making goodthe distributed wall surfaces to match with existing specification including taking down complete all as specified and as diected. |
| 202 | M&L in renewal MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and directed. |
| 203 | M&L in renewal MCB SPN 40 to 63 Amps, 240 volts \"C\" series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. |
| 204 | M&L in renewal MCB SP 6 to 32 amp 240 volts, 40 Amps, \"C\" series 10 KA including connection with suitable size copper lugs.complete all as specified and directed. |
| 205 | M&L in renewal ModularSingle pole and neutral enclosure with a two pin and earth plug and socket complete with red and green bottom switch complete all as specified and directed. |
| 206 | M&L in renewal, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 50 Sqmm 3.5 Core complete all as specified and as diected. |
| 207 | Excavation in trenches n exc. 1.5 m wide and n\" exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 208 | Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed. |
| 209 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as diected. |
| 210 | M&L in renewal Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and as diected. |
| 211 | M&L in renewal and laying un reinforced precast concrete cable coverClass LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and directed. |
| 212 | M&L in renewal tube \"Light\" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed. |
| 213 | M&L in renewal cable jointing kit for 1.1 KVgrade cable for endjoint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, Al conductor cable of size 25 to 50sqmm, Indoor / Outdoor type complete all as specified and directed. |
| 214 | M&L in renewal GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches complete all as specified and as diected. |
| 215 | M&L in renewal GI pipe Med grade of20 mm dia alongwith all fittings and fixtures complete laid in trenchescomplete all as specified and as diected. |
| 216 | M&L in renewal 25 mm Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts fixed at any location of size 25 mmm dia complete all as specified and as diected. |
| 217 | M&L in renewal20 mm Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts fixed at any location of size 20 mm dia complete all as specified and as diected. |
| 218 | M&L in renewal earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded BTstone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in \"D\" shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed. |
| 219 | M&L in renewal modular plate and provising of new modular plate of different size with flush metel boxincluding fixing ,the existing modular switchs , modular socket ,modulare regulator and refixing them in new board complete all as specified and as directed. |
| 220 | M&L in renewal White cover plate with frame but 2/3/4 module |
| 221 | M&L in renewal White cover plate with frame but 6/8/12 module |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
