|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level. |
| 4 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 5 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 6 | Providing and fixing aluminium/Brass sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete |
| 7 | 250x16 mm |
| 8 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 9 | 300x10 mm |
| 10 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 11 | 100 mm |
| 12 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 13 | Twin rubber stopper |
| 14 | 12 mm cement plaster of mix : |
| 15 | 1:6 (1 cement: 6 fine sand) |
| 16 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 17 | 1:6 (1 cement: 6 fine sand) |
| 18 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 19 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 20 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 21 | Old work (one or more coats) |
| 22 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 23 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 25 | One or more coats on old work. |
| 26 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 27 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 28 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 29 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 30 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 31 | Of area 3 sq. metres and below |
| 32 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 33 | 75 to 80 mm dia pipe. |
| 34 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : |
| 35 | W.C. pan with ISI marked white solid plastic seat and lid |
| 36 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 37 | 10 litre capacity - White |
| 38 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 39 | Flat back wash basin of size 550x400 mm. |
| 40 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 41 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 42 | 20 mm nominal outer dia. Pipes. |
| 43 | 25 mm nominal outer dia .Pipes. |
| 44 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 45 | 25 to 40 mm nominal bore |
| 46 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 47 | 25 mm nominal bore |
| 48 | Providing and fixing cPVC Union/cPVC nepple in G.I/cPVC pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 49 | 25 mm nominal bore |
| 50 | Providing and fixing C.P. brass bib cock of approved quality and make conforming to IS:8931: a) 15mm dia nominal bore . |
| 51 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 52 | 45 cm length |
| 53 | 15 mm nominal bore |
| 54 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 55 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 56 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 57 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 58 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 59 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 60 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 61 | For fixed portion |
| 62 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 63 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 64 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 65 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 66 | Pre-laminated particle board with decorative lamination on both sides. |
| 67 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 68 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 69 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have minimum Humidity Resistance (RH) of 95%, minimum Light Reflectance = 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of minimum 0.30 mm thick (minimum galvanized @120 gsm) having rotary stitched double webbed white with 6mm reveal Silhouette profile (white/black) comprising of main T runners of minimum 15x32 mm of length 3000 mm, cross T of size minimum 15x32mm of length 1200 mm and secondary intermediate cross T of size minimum 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (minimum galvanised @ 80 gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, |
| 70 | spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size minimum 24x24X3000 mm made of minimum 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in charge. |
| 71 | With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) |
| 72 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 73 | 30 mm thick |
| 74 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 75 | (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 76 | Frame size 65 x 100 mm |
| 77 | Providing & fixing fly proof wire gauze mesh to windows, clerestory windows & doors with aluminium \"U\" beadingas per site requirement and as directed by E-I-C etc complete. ( Aluminium \"U\" beading will be paid separately under relevant item) |
| 78 | Stainless steel (grade 304) wire gauze of 0.56mm dia wire and 1.14mm aperture on both directions. |
| 79 | Providing and fixing 32 mm dia PVC rigid pipe forwash basin as waste pipe. The pipe shall be of length upto 600mm including P.V.C. waste fittings, P.V.C bend, union etc and fixing the pipewith clamps on wall surface, all as per site requirement, . All complete as directed by the Engineer in charge. |
| 80 | Providing and fixingC.P brass long body Pillar cock of approved quality and make as per directions of Engg-in-Chargea) 15mm dia nominal bore |
| 81 | Providing and fixing PVC SWR soil waste and vent pipes (by cutting, removing andreplacing existing damaged CI Sanitary Pipes wherever required)conforming to IS : 13592 Type B including jointing with \"T\" shaped seal/rubber ring conforming to IS : 5382 usingsolvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant). (i)Single socketed pipe(couplings,other accesories/Fittingswill be paid seperately) |
| 82 | 110mm diameter |
| 83 | 75mm diameter |
| 84 | Providing and fixing PVC SWR pipefittings/Accessories conforming to IS : 14735 Type Bincluding cutting&replacing existing damaged CI fittings/accesories and jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 85 | Plain Bend |
| 86 | 110mm diameter |
| 87 | 75mm diameter |
| 88 | Tee with door |
| 89 | 110X110X110 |
| 90 | 75X75X75 |
| 91 | Y- with door |
| 92 | 110mm diameter |
| 93 | 75mm diameter |
| 94 | Providing and fixing polished chromium finished PVCHealth faucet of approved quality and make with wall hooks & flexible pipe of length 1.00 m and nozzle jet with all necessary fittings complete as directed by the engineer in charge.a)15mm nominal bore |
| 95 | Providing and fixing C.P. brass two way (2in1) bib/ stop cock of approved quality and make conforming to IS standards and weighing not less than 690 gms. a)15 mm nominal bore |
| 96 | Dismantling of the aluminium partitions including stacking of serviceable material at the designated location in the compound including disposal of unserviceable material if any out of compound to any municipal dump yard all complete as directed by Engineeer in charge. ( Area of partition dismantled will be measured for payment) |
| 97 | Making and Fixingin positionaluminum partitions and doorsas per the approved drawing usingdepartmental material all complete as per the specifications andas per the directions of the Engineer-in-charge. Necessary new screws/MS clamps/Rawl plugs wherever required shall be provided for fixing the partitions . Aluminium sections/glass/boards/gaskets /snap on beadingwill be supplied by the department at no cost. (Area of erected partition havingboard/glass panels/grill only shall be measured for payment. Any new aluminium sections/glass/boards/gasketsprovided as per directions of EICshall be paid separately). |
| 98 | Rebate for taking away of dismanlted MS ventilator icluding MS grills etc all complete |
