|
| 1 | Part-A (Civil Work): |
| 2 | Providing & applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 3 | Wall painting with acrylic emulsion paint ,having VOCcontent less than 50gms/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 4 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. Sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25mm wide x 1.6 mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceilling with dash fastener 12.5 mm dia. X50mm long with 6mm dia. bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. Channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. Intermediate channel with connecting clips made out of 2.64 mm dia x 230mm long G.i. Wire at every junction, including fixing perimeter channels 0.5mmthick 27 mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with help of dry wall screws of size 3.5 x 25 mm at 230mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacture\"s specification and also including the cost of making openins for light fitings, grills, diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I : 2011 (BIS) |
| 5 | Providing & fixing aluminum work for doors,windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285,fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions,1.e. At top,bottom and sides with required EPDM rubber/neoprenegaskets etc.. Aluminum sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including cleat angle. Aluminum Snap beading for glazing/paneling,C.P brass/stainless steel screws,all complete as per architectural drawings and the direction of Engineer -in-charge. Glazing,paneling and dash fasteners to be paid for separately.:For fixed portion. Powder Coated aluminium ( minimum Thickness of powder coating 50 micron)\" |
| 6 | For shutters of doors,windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required ( Fittings shall be paid for separately) Powder Coated aluminium ( minimum Thickness of powder coating 50 micron)\" |
| 7 | Providing & fixing12 mm thick pre- laminated particle board flat pressed three layer of graded wood particle board conforming to IS : 12823 Grade I Type II, in paneling fixed in aluminum doors,windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per directions of engineer – in – charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other sides . |
| 8 | Providing & fixing glazing in aluminium door,window,ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings & the directions of the engineer -in- charge. With Float glass panes of 5.0mm thickness (weight not less than 12.50 kg/sqm) |
| 9 | Providing& fixingaluminum handles,ISI marked, anodised transparent or dyed to required colour or shade,with necessary screwsetc. complete : 125mm |
| 10 | Providing& fixingbright finished brass 100mm mortice lock with 6 levers without pair of handles of approved quality foraluminum doors including necessary cutting and making good etc. complete. |
| 11 | Providing& fixingaluminum tower bolts, ISImarked, anodised transparent or dyed to required colour or shade,with necessary screws etc. complete : 200 x 10mm |
| 12 | Providing and fixing pre-coated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. R.O Plant |
| 13 | Providing and fixing pre-coated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Flashings/ Aprons.( Upto 600 mm) |
| 14 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes 1 |
| 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Floor tiles |
| 16 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 45 x 70 mm |
| 17 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick |
| 18 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement motar |
| 19 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead of area 3 sq. metres & below |
| 20 | Brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 21 | Half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) |
| 22 | 12mm cement plaster of mix:1:4 (1 cement : 4 fine sand) |
| 23 | Providing & fixing G.I Pipes complete with G.I fittings and clamps,including cutting and making good the walls etc. Exposed on wall 25mm dia nominal bore. |
| 24 | Providing & fixing gun metal non -return valve of approved quality 25mm dia nominal bore Horizontal. |
| 25 | Providing & fixing brass ball value of 15mm dia. |
| 26 | Painting G.I pipes and fittings with synthetic enamel white paint withtwo coats over a ready mixed priming coat, both of approved quality for new work : 25mm diameter pipe |
| 27 | Providing& fixingChlorinated polyvinyl chloride (CPVC) pipes heaving thermal stability for hot & cold water supply & all CPVC plain & brass threaded fitting included fixing the pipe with clamp at 1.00 metre spacing. This include jointing of pipe & fitting with one step CPVC solvent cement & testing of jointscomplete as per direction of Engineer- Incharge. Internal work - exposed on wall with 15mm dia. nominal bore and S. No ( 1.27, 1.28 & 1.29) Same descrption. |
| 28 | 20mm dia. nominal bore |
| 29 | 25mm dia. nominal bore |
| 30 | 32mm dia nominal bore |
| 31 | Wood paneling on over walls for covering of electrical & Plumbing lines. Providing & fixing 2mm thick vineer sheet over 9mm MR ply fixedover frame of woodof size 25mm x 50mmwith horizontal& vertical spacing of 600mm C/c. The wooden frame to be fixedover wall on wooden spacer of 75mmx75mmx75mm at600 metre spacing. Cutouts shall be made for electrical & plumbing fittings. Decorative edge beading of size 25mm in periphery ofwooden paneling to be provided.. |
| 32 | Providing and fixing inner wall system on light gauge steel frame work with inner face12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick cement bonded particle board (termite, fire and moisture resistance) confirming to is:14276:1995 as per standard sizes fixed with self drilling/taping screws/ fasteners @ 60 cm c/c of approved make . (cost of frame work to be paid for separately) |
| 33 | Sub Total Amount |
| 34 | Part-B (Electrical Work): |
| 35 | Supply & fixing of Surface/ recessed mounting Led Panel (2x2) F 36W, 3600 Lumens standard brand (Existing wiring point already given in this fixture). |
| 36 | Supply & fixing wall mounted fan 400 mm (16”/ 400 mm wave plus (without wiring). (Crompton make high flow) |
| 37 | Supply of DD MCB Distribution Board 415 V on surface/ recessed mounted 16 way(Havel’s) |
| 38 | Supply of 63 A-TPN MCB |
| 39 | Supply of 25 A-SP MCB rating SPMCB C Carub 10 KA breaking capacity |
| 40 | Supply 6 sqmm unarmed flexible 4 core Copper cable ISI Marked FRLS PVC Mounted |
| 41 | Supply 2.5 sqmm ISI marked FRLS PVC installed single core copper conductor cable red. |
| 42 | Supply 2.5 sqmm ISI marked FRLS PVC installed single core copper conductor cable red. |
| 43 | Supply of 4 sqmm unarmed flexible copper cable 3 core multi standard ISI mark. |
| 44 | Supply of 63 A-TPN 415 V Copper bus bar panel 4 way with Curve bus (Havel’s) withpoint. |
| 45 | Supply of 12 way surface mounted modular plate. |
| 46 | Supply of 12 way module PVC box surface mounted. |
| 47 | Supply of 3 way modular plate surface mounted. |
| 48 | Only supply of 3 module surface mounted box (PVC) . |
| 49 | Supply of 20 A power socket modular |
| 50 | Supply of 20 A power switch module . |
| 51 | Supply of 25 A SP AC box for AC supply distribution board. |
| 52 | Sub Total Amount Part-B (Electrical work) |
| 53 | Total Amount of Part- A & B (Civil & Electrical work) |
| 54 | GST applied on the Subtotal Amount (As mentioned in S.No.2.19 of Col. No. 8) |
| 55 | Total Amount including GST |
