|
| 1 | Dismantling brick work or stone work in lime or Cement mortar and including stacking of material as directed by E/IC with in a distance of 60 meters (200 feet) but Mud Mortar. |
| 2 | Excavation in soil mixed with moorum/shingle, kankar requiring the use of special tools & plant such as pick axes sabbals etc. foundation in ordinary Soil (Loam, Cley or sand) including, lift up to 1.50 M and lead up to 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge up to a distance of 30 M form the foundation trenches. Including royalty. |
| 3 | Providing and laying cement concrete in 1:5:10 (1 Cement :5 Fine Sand :10 Stone Ballast 40 mm guages) and curing complete, including cost of form work in foundation and floors. |
| 4 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. including cost of centering shuttering finishing and excluding reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregates 20mm nominal size) upto plinth level. |
| 5 | M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work. |
| 6 | R.C.C. work with cement approved coarse sand and 2 cm (3/4) gauge approved stone ballast in the proportion 1:1.5:3 for slab work excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials labor and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150. |
| 7 | M-150 Brick work in 1:4 with Cement and coarse sand including supply of all material, labor T & P etc. required for proper completion of work. |
| 8 | R.C.C. work with cement approved coarse sand and 2 cm (3/4) gauge approved stone ballast in the proportion 1:1.5:3 for slab work excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc. and also including supply of all materials labor and tools and plants etc. required for proper completion of the work. Strength of the concrete shall not be less than M-150. |
| 9 | Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars). |
| 10 | Supply and fixing of fan box with labour T&P etc. all complete. |
| 11 | Supply and fixing of 110mm dia PVC pipe confirming to ISI make working pressure 6kg/cm including testing labour T&P etc. all complete. |
| 12 | Mild Steel and Iron work of small size and section such as holding down woods, hold fasts tierods, grating etc. (When not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of grill/stairs case railing. |
| 13 | Supply & fixing of 32 mm thick flush doors, commercial quality conforming of I.S. 2202 part 1 (1983) including fixing of wooden cleats & stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screw to be supplied departmentally. |
| 14 | Supply and fixing oxided iron fitting etc. all complete. |
| 15 | Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised anodic coating not less than and a pair of anosides (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade |
| 16 | Providing and fixing aluminum hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transperent or dyed to required colour and shade with necessary screw bolts nut and washers etc. complete - single rubber stopper. |
| 17 | Providing and fixing aluminum tower bolts stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transperent or dyed to required colour and shade with necessary screw etc. complete. |
| 18 | Providing and fixing aluminum handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transperent or dyed to required colour and shade with necessary screw bolts nut and washers etc. complete. |
| 19 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavt weight) with stainless steel screw etc. complete. |
| 20 | Providing & fixing stainless steel (Grade 304) raiding made of hollow tubes channels plates etc. including welding grinding, buffering polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolt complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc, of required size on the top of the floor or the side of slab with suitable arrangement as per approval of Engineer in-charge, (of pavement purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 21 | 12MM Thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not including 80mm in girth and finished even and smooth. No extra for missing any additive. 1 cement : 4 Coarse Sand. |
| 22 | Finishing walls putty approved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all materials. |
| 23 | Finishing wall with water proofing cement paint of approved make such as super snowcem, Durocem, Robiance, Guttucem, Supercem quality and of required shade on undecorated wall surface (two coat) over shade and including two coat white super primer to give and even shade after thoroughly after brushing the surface to for each coat of waterproof cement paint after the first coat give an even shade. |
| 24 | Painting two coat other primer on steel with sianth paint including etc all complete. |
| 25 | Kota stone slab flooring oer 20mm (average) thick base, laid and jointed with grey cement slurry, mixed with pigment to match shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) 25mm thick |
| 26 | Providing and laying Vitrified tiles in floor of 500x500 mm size (thickness 10mm), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in desired colour and shades, laid with cement based high polymer modified quick set tile adhesive (water based) confirming to IS : 15477 including grouting of joints. |
| 27 | Providing and laying ceramic non-skid floor tiles of size 300x300 nm (thickness to be specified by the manufacture) of 1st qualiting confirming to IS : 15622 of approved make in colour such as white lvory grey fume red brown, lain on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching plgment etc. complete. |
| 28 | Providing and laying of GI pipe 25mm etc. |
| 29 | Supply and Fixing of Brass Shower etc. |
| 30 | Supply and Fixing of G.I. Tee |
| 31 | Supply and Fixing of G.I. Jamul |
| 32 | Supply and Fixing of Stop cock etc. |
| 33 | Supply and Fixing of Ferrul etc. |
| 34 | Supply and Fixing of C.I. Lili cock etc. |
| 35 | Supply and Fixing of C.I. Jali |
| 36 | Supply and Fixing of CPVC Pipe etc. |
| 37 | Supply and Fixing of light fitting switch board |
| 38 | Supply and Fixing of wiring of light point |
| 39 | Supply and Fixing of wiring sub main |
| 40 | Supply and Fixing of power point 15mm |
| 41 | Supply and fixing of 27 watt CFL etc. all complete. |
| 42 | Providing of other electrical work etc. |
| 43 | Supply and fixing of black granite stone board and approved standard matter with brick work, plaster & paint etc. all complete. |
| 44 | Sub Total (A) |
| 45 | Add / Deduction For Estimate Figure Amount Match |
| 46 | Grand Total Please Enable Macros to View BoQ information |
