|
| 1 | Brick work in super structure using bricks of class designation-75 in CM 1:6 |
| 2 | Reinforced cement concrete work including curing compaction, finishing with rendering in cement sand mortar 1:3 and making good and joints excluding cost of centering, shuttering and reinforcement in 1:1.5:3 (1cement: 1.5course sand: 3-graded stone aggregate 20mm nominal size) |
| 3 | Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) in foundation and super structure up to 4.5m height above plinth level hot rolled deformed (IS: 1139) cold twisted (IS: 1786) bars |
| 4 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of from work |
| 5 | Steel worrk in built up tubular trusses including cutting hoisting (Height upto 10m) Fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers…. |
| 6 | Provding and fixing Green or blue Expo corrugated Sheet Roofing Fix with G.I.J. of L Hooks bolts and nuts 8mm diameter with bitumen and G.I. Limpet washers for classs of Sheets |
| 7 | Painting with enamal paint of approved brand and manufacture to give an even shade Two or more coats |
| 8 | 20mm thick plaster on new work including curing and racking of joints in CM 1:6 |
| 9 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD BSR 2022 -Less 10%) |
| 10 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -PWD BSR -2022 |
| 11 | Wall painting with plastic emulsion paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -PWD BSR-2022 |
| 12 | S & F iron door |
| 13 | S & F Section window (PWD BSR-2022) |
| 14 | S & F wire mesh on Section window |
| 15 | S & F Iron bars on Section window |
| 16 | Enamel painting on door and window |
| 17 | Cement concrete in floor with stone ballast size 40mm including curing and compaction etc in 1:6:12 mix |
| 18 | S and F Vertified Tiles in Flooring |
| 19 | Providing Solid PVC False Ceiling Consisting of 600mm x 600mm, 5mm (+-0.25) thick plain embossed PVC Sheet of Density 600Kg/Cbm Manufactured by an ISO-6001-2015 Certified Company Used as panel insert in a Frame work made using Powder coated aluminium T-Section of Size 1\" x 1\" (25x25mm 19 guage of 1mm Thick) in square patttern of grid sizes of 2\"x2\" (600x600mm) the eluminium framwork is supported from the ceiling with the help of \"J\" Hook and G.I. Wire /6mm M.S. Rods of Required size to maintain proper level etc the eluminium framwork is supported on side wall with the use of aluminium L section of size 1\"x1\" (25x25mm) angles etc complete as per direction of engineer |
| 20 | Wiring for fan/light point in PVC condut pipe as per specification |
| 21 | Wiring for circuit/submain as per specification- 2x1.5Sqmm |
| 22 | Ceiling fan |
| 23 | Yojna Board and Contiingency Charges Please Enable Macros to View BoQ information |
