|
| 1 | Providingandlayinginpositioncementconcreteof specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 2 | Providingandfixing 18mmthickgangsawcut,mirrorpolished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters,window sills,facias andsimilar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding of edges and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry/Ruby red Area of slab upto 0.50 sqm |
| 3 | Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. |
| 4 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including the cost of holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 5 | Providing and fixing 1st quality ceramic glazed wall tiles not less than 18\"x24\" conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in walls,skirting, risers of steps and dados, over 12 to 20 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202(Part I) decorative type,core of block boardconstruction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202(PartI)non-decorative type,core of blockboardconstruction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 8 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm |
| 9 | Providingand fixingbright finishedbrass door latch withnecessary screws etc. complete : 300x16x5 mm |
| 10 | Providingandfixingbright finishedbrasshandleswithscrewsetc. complete: 125 mm |
| 11 | Providingand fixingaluminiumdie cast body tubular typeuniversal hydraulic door closer of Godrej make , door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 12 | Providing and fixing bright finished brass 100 mm mortice latch and lock of make Godrej /Harrison , with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 13 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, , all completeIngratings,frames,guardbar,ladder,railings,brackets, gates and similar works |
| 14 | Providing andlayingCeramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 15 | Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size Size of Tile : 600 x 600 mm |
| 16 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.oints to be made separately). Size of Tile 600x600 mm |
| 17 | Providing and fixing on wall face unplasticisedRigidPVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 18 | Providing and fixing on wall face unplasticisedRigidPVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 19 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm |
| 20 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm Bend 87.5° 75 mm bend |
| 21 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm Bend 87.5° 110 mm bend |
| 22 | Providing and Fixing 75 mm G.I clamps of approved design -for PVC pipe fixing,clamps include4\" clamp/slottesd basewith 3\" U -shape bolt and nut,flastner,etc complete item excute as directed by Engineer in charge. |
| 23 | Providing and Fixing 110/100 mm G.I clamps of approved design -for PVC pipe fixing,clamps include6\" clamp/slottesd basewith 4\" U -shape bolt and nut,flastner,etc complete item excute as directed by Engineer in charge. |
| 24 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main \"T\" runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross \"T\" of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main\"T\" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main \"T\" runners to be suspended from ceiling using al. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, more than 2mm G.I.wire , spaced at 1200 mm centre to centre along main \"T\". Bottom exposed with 24 mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection >85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. |
| 25 | Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing \"C wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the sofit with the help of sofit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of GI steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with the help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with : GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes andhavingNRC of 0.5,electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted afer bending and perforation. |
| 26 | 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:4(1 cement: 4 fine sand) |
| 27 | 20 mm cement plaster of mix: 1:4(1 cement: 4 fine sand) |
| 28 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. |
| 29 | Dismantling old plaster or skirting raking out joints of stone masonary and cleaning the joints for pointing including disposal of rubbish to the dumping ground within 50 metres lead. |
| 30 | Pointing on stone work with cement mortar 1:3 (1 cement: 3 fine sand) : Flush/ Ruled pointing |
| 31 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC(Volatile Organic Compound ) content less than 50 gram/ litre, of approvedbrand and manufacturerincluding applying additional coats whereverrequired to achieve even shade and colourOld work (one or more coats) |
| 32 | French spirit polishing : Two or more coats on new works including a coat of wood filler |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 34 | Wall painting with premium acrylic emulsion paint of interior grade( Luster ), having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approvedbrandandmanufacture,includingapplyingadditionalcoats wherever required to achieve even shade and colour. Two coats |
| 35 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 36 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 37 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work |
| 38 | French spirit polishing : One or more coats on old work |
| 39 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone ( Apex or eqivalant) additives of required shade Old work (Two or more coats applied @ 1.43 V/ 10 sqm) over existing cement paint surface |
| 40 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modifiedself curing mortar, including disposal of rubbish, all completeas per the direction of Engineer-In-Charge. |
| 41 | Taking out existing wooden door shutter, repair by cutting, etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 42 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 43 | Demolishingbrickworkmanually/bymechanicalmeansincluding stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 44 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 45 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 46 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 25 mm up to 40 |
| 47 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 48 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge. |
| 49 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading with in 1 KMground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 50 | Providing and fixing under counter wash basin of approved shape and make Jaquar/kohler/Durovit , 15mm Pillar cock long neck with areator with necessary fittingetc.make-Jaquar or equivalent, 32 mm C.P. brass waste of standard pattern: White Vitreous China Wash basin size 630x450 mm or eqvivalent size |
| 51 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre longof make Jaquar/ kohler/Durovitas approved by Engineer - in - charge. |
| 52 | Providing and fixing white vitreous china flat backtype lipped front urinal basin of 430x260x350 mm or equivalent size of make Jaquar/kohler/Durovitwith automatic flushing cistern with standard flush pipe: One urinal basin of make jaquar or eqivallent |
| 53 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia |
| 54 | Providing and fixing toilet paper holder : C.P. brass |
| 55 | Providing and fixing white vitreous china extended wall mounting water closet of approximate size 780x370x690 mm of approved shape and make Jaquar/kohler/Durovit including providing & fixing single piece slim concealed cistern body with wall mounted frame dual flush fitting of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall 25 mm nominal dia Pipes |
| 57 | ProvidingandfixingChlorinatedPolyvinylChloride(CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes |
| 58 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore |
| 59 | Providing and fixing C.P. brass long nose bib cock of approvedmake Jaquar/kohler/Durovit-. 15 mm nominal bore |
| 60 | Providing and fixing C.P. brass long body bib cock or two way bib cockofmake Jaquar/kohler/Durovit- 15 mm nominal bore |
| 61 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofmake Jaquar/kohler/Durovit -15 mm nominal bore |
| 62 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. |
| 63 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length |
| 64 | Cutting holes of required size in brick masonry wall and making good the same with plaster works and etc. complete as per direction of Engineer-incharge. |
| 65 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100 mm diameter |
| 66 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter |
| 67 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe |
| 68 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 150 x 100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 69 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L D- 2.5 Rectangularshape 600x450mminternal dimensions |
| 70 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter |
| 71 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 72 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : Forshuttersofdoors,windows&ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 73 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side |
| 74 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 75 | Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 76 | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-charge Powder coated minimum thickness 50 micron aluminium |
| 77 | Providing and fixing 600x450 mm beveled edge mirror of superior glas(of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 78 | Providing and fixing AUTO CLOSING CONCEALED URINALFLUSH VALVE with necessary fittingetc.make-Jaquar (Description - 84818020 / )or equivalent |
| 79 | Providing and fixing 25mm average thick kadappa stone slab in platform and shelves with one side machin polished,machin cut,etc.fixed in cement mortar 1:4 in coased sand including making hole in stone ,making groove in the wall and making good the damages to walls and floors as required to complete,including disposal of rubbish upto to the dumping ground with in 50mtr lead. |
| 80 | Providing and fixingtoilet cubical system for wall of toilets any size ( L or C shape including door) in SS-304M series,comprising of grid SS components ( Thumb turn indicator lock,gravity hinges,leg,coat hook with door stopper,door knob) aluminium (SS finish) top rail,h &u section with 12mm compactlaminate having minium density of 1350lh/m3, ( Make T-line/Marino/Cubical India)etc.complete as per direction of Engineer-in-charge. |
| 81 | Providing and fixing Health faucet ABS body with I metre SS braided connection pipewith necessary fittingetc.make-Cera or equivalent |
| 82 | Providing and fixing 2way Bib cock with necessary fittingetc.make-Jaquar or equivalent |
| 83 | Providing and Fixing superior glass (of approved quality) looking mirror of 5mm thick with frame made out byaluminium shutter profile oraluminium framewith good quality gasket for glass,back side backing PP foam sheet fixing arrangement,complete item excute as directed by Engineer-in-charge. Make- Modi /santgobin or eqivalent |
| 84 | Constructing brick masonry manholeinside size 90x80cm and 45cm deep in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C Precast manhole cover of size 900 x 600 mm medium duty , foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat ofneat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :With fly ash bricks of class designation 7.5 |
| 85 | Providing and fixing 18mm thick MR Grade plywood approved brand and manufacture in frame work of cup-board,table tops,table side,partition,shelves etc.with adhesive and nails, etc.complete as per the direction of Engineer-in-charge.Ply-wood use make only:- Green ecotech,Century,National ,Mountwall,Gargan or Tower etc. |
| 86 | Providing and fixing 18mm thick MR Grade plywood approved brand and manufacture in the cup-board shutters,drawers and key board Including 2nd class teak wood lipping of 18x5mm size to the exposed edges with necessary screws, adhesive, nails ,nickle plated bright finished w-hinges , decorative brass handles, mangnatic door catcher,brass cup-board lock,Telescopic channel for drawers,Chain for shutter ,etc.complete as per the direction of Engineer-in-charge.Ply-wood use make only:-Green ecotech,Century,National ,Mountwall,Gargan or Tower etc. |
| 87 | Providing and fixing 1mm thick decorative laminate lamination of PEARL GLOSS/SUEDE finish to the cup-board / ward robe shutters,with necessary screws,adsive,nails etc complete as per directed by the Engineer-in-charge.GREENLAM or HERITAGE make only. |
| 88 | Providing and fixing 0.6 to 0.7 mm thicklaminate finish to internalsurface of cup-board , ward robe , drawers ,shutters,with necessary ,adsive,nails etc complete as per directed by the Engineer-in-charge. |
| 89 | Providing and Fixing 100 mmPVC Floor nhani trap Make Finolex or eqivalentfor drainage work including necessary cuttting,jointing with adhesive and etc. |
| 90 | Re-fixing of aluminum work in partition,doors , windowsand ventilators with partical boards, glasses including cutting and making in proper size and shape rates includingrawl plug , screws , expansion hold fastner, PVC/Neoprene rubber,etc. complete item excute as per direction of Engineer-in-charge.( Aluminium section /prelaminated board/glass supply by departmentaly) |
| 91 | Powder coating to available aluminum section ( section length upto 10ft ),minimum thickness of powder coating should be50 micron, the aluminium section areused for partition,doors and window, item including the cost of cleanning of section, loading, unloading ,both side transport ie. NCL to shop and return, execute item as directed by engineer -in-charge |
