|
| 1 | New Concealed Electrification work at CHE 004 Room (Ground Floor) in Chemical Engineering Department” at V.N.I.T. Campus, Nagpur. |
| 2 | Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 3 | Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB/TP MCB/FP MCB/RCCB/RCBO complete erected on providedangle iron/GI frame. |
| 4 | Supplying, erecting, testing & commisioning plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete as per specification no. CP/SH/CR |
| 5 | Supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A having 25mm ( width) X 5 mm (thickness), with 99.9 % aluminium purity as per E91E grade & current density 0.8 A per sq mm compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating and two nos of separate earthing terminals complete as per specification no. CP-BB |
| 6 | Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid inprovided trench/ pipe as per specification no. CB-LT/AL |
| 7 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways/phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (horizontal busbar type) as per specification no.SW-MCBDB.. |
| 8 | Supplying and erecting iron work,purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer. |
| 9 | Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no.SW-MCB |
| 10 | Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 11 | Supplying, erecting & marking DP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB |
| 12 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly flushed to wall with requiredchiselling and finishing with cement mortar / POP as per required to match the background. |
| 13 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background |
| 14 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 15 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background |
| 16 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 16/18 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. |
| 17 | Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete. |
| 18 | Supplying and erecting modular type switch 16A on provided plate and box with wiring connections complete. |
| 19 | Supplying and erecting modular type blanking plate one module, on provided plate & box |
| 20 | Supplying and erecting blanking plate of suitable size on MCBDB |
| 21 | Point wiring for light/bell hybrid type (surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm HMS PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-HW |
| 22 | Wiring for plug on board with switch socket surface /concealed type, copper wiring and earthing and with modular accessories as per specification no. WGPW/ CW |
| 23 | Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking/inside pole/bus bars or any other places. as per specification no. WG-MA/BW |
| 24 | Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/ inside pole/bus bars or any other places. as per specification no. WG-MA/BW |
| 25 | Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking/ inside pole/bus bars or any other places as per specification no. WG-MA/BW |
| 26 | Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. |
| 27 | Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. |
| 28 | Supplying and erecting HMS PVC conduit 20mm dia. with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 29 | Supplying and erecting HMS PVC conduit 25mm dia. with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 30 | Supplying and erecting HMS PVC conduit 32mm dia. with PVC accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 31 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 32 | Supplying and erecting PVC trunking (PVC casing-n-capping) of size 60mm with accessories on wall/ceiling as per specification no. WG-MA/CON. |
| 33 | Supplying and erecting 25mm dia. corrugated flexible polypropylene conduit |
| 34 | Supplying and erecting LED Panel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80,CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 35 | Supplying and erecting cabin fan of A.C. 230 V. 50 cycles 400 mm. sweep complete with necessary brackets for fixing cabin fans, wire etc. |
| 36 | Supplying & erecting Modular AC box complete with wooden box , MCB, Socket etcsuitable for 2 Ton Air Contioner(A.C) (Make Use Only Havells or Crompton)(concealed type) |
| 37 | Dismantling the existing light, fan, Switch boards,Powerboards ,TPNDB, detachable gland plate , independent plug point, wiring including circuit mains of all types along with all accessories and filling of holes with POP and cement making wall as original etc. complete as per specification no. WG-DM/PW |
| 38 | Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm.stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose). |
