|
| 1 | Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out (Upto 3.00 M beyond outer face of external wall) |
| 2 | Excavation in trenches n exc 1.5 m widen exc 1.5 m deep in soft/ loose soil for foundation etcor for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out. |
| 3 | Excavation in trenches n exc 1.5 m wide, exc 1.5 m deep n exc 3.00 m deep in soft/ loose soil for foundation etcor for shaft, wells, manholes etc n exc 10 sqm on plan and exc 1.5 m deep n exc 3.00 m deep and getting out. |
| 4 | M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete complete all as specefied. |
| 5 | Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specefied. |
| 6 | M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface areaall as specified |
| 7 | M&L for treating the back fill in contact with foundationat the rate of7.5 litres of emulsion per sqm of vertical surface area. |
| 8 | Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick |
| 9 | Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point . |
| 10 | Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate)as in columns, pillars, piers, posts and struts |
| 11 | Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate)as in beams, cantilevers, bressummers, lintels over 1.5m span |
| 12 | Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 13 | M&L for Reinforced cement concrete 1:2:4(using 20 mm graded crushed stone aggregate) as in lintels up to 1.5 meter span, seismic bands,lintel bands & lacing courses, parapet railing, bed plates and similar items inclnecessary form work. |
| 14 | Reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) as in chajjas |
| 15 | M &L Brickwork with subclass \"B\" old size bricks, straright or corved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specefied. |
| 16 | M&L 40 mmthick Damp proof course to horzontal or vertical surfaces including necessary formwork in cemrnt concrete 1:2:4 Type B 0 complete all as specefied. |
| 17 | M&L Brickwork with subclass \"B\" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specefied. |
| 18 | Formwork to sides of concrete foundations, footings, bases of col umns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work;rough finished surfaces of conrete flat |
| 19 | Formwork to sides ofsquar ,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat |
| 20 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of conrete flat |
| 21 | Formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; and similar work not exc 200mm thick;rough finished surfaces of conrete flat |
| 22 | Formwork to chullah hoods, chajjas, troughs and similar items in cluding edges,rough finished surfaces of conrete flat |
| 23 | Mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 24 | Mild steel TMT bars 6 to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 25 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 26 | S&F pressed steel frames for doors of size 105x60 mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed, Size of fame |
| 27 | S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type , bothface is covered with decorative face veneer with lipping/frame to match, |
| 28 | Supply and fixing Pressed Steel Windows/Ventilatorusing box type hinges, MS Spring Latch, MS tower Bolt and telescopic stay complete |
| 29 | M&L 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 30 | M&L 4 mm thick frosted glass,and glazing with oil putty in square n exc 0.5 sq. m in each pane |
| 31 | S&F Solid PVC Double door frame of size 50mm x 47 mm made out of 5mm Plain colour PVC sheet reinforced with M.S tube, suppling & fixing in opening as per specification & drawing |
| 32 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame as per specification and drawing and directed. |
| 33 | S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, Length of bolt in mm 200 |
| 34 | S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, Length of bolt in mm 150 |
| 35 | S&F Mild steel pressed handles, oval type, stove enamelled black, Size of handle in mm 150 |
| 36 | S&F 2 ndclass HW small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. Cm each |
| 37 | S&F mild steel sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, Length of bolt in mm 300. |
| 38 | S&F Butt hinges of 100 mm size, Medium weight, cold rolled mildsteel and fixed, |
| 39 | S&F aluminium anodised barrel tower boltsof extruded section, length of bolt in mm 150 |
| 40 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.length of bolt 300 mm |
| 41 | S&F extruded aluminium alloy handles, fabricated type., anodised Size of handle in mm 125 |
| 42 | M&L for treating the top surface of filled earthat the rate of 5 litres of emulsion per sqm of surface areaall as specified |
| 43 | S&F mild steel small articles as holdfasts etc complete all as specefied. |
| 44 | Providing cement concrete 1:3:6 Type C 1 (using 20 mm graded aggregate) in filling around pressed steel frames and bed blocks etc |
| 45 | M&L sand filling under floors or in foundation including watering and consolidation. |
| 46 | Supplied and fixed 600x600x9 to 10mm thick coloured vitrified tiles in floorsset &jointed in neat cement slurry and pointed in white /coloured cement to match the tiles. |
| 47 | M&L 25mm thick PCC (1:2:4) type B0 as in floor to receive tiles complete all as specified. |
| 48 | M&L 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base. |
| 49 | M&L (300x300)x 7 to 8 mmcoloured non skid ceramic colour tiles as in floorsset& jointed in neat cement slurry and pointed in white/coloured cement to match the tiles. |
| 50 | M&L 40mm thick PCC (1:2:4) type B1, (using 20 mm graded stone aggregate) finish even and smoothwith using extra cement complete all as specified. |
| 51 | Supplied and fixed 600x600x10mm thick vitrified coloured tiles on vertical position such as in dados/skirting set and jointed in neat cement slurry and pointed in white /coloured cement to match the tile. |
| 52 | M&L 300x200x6 to 7mm coloured ceramic tiles(Ist quality) as on vertical surface set& jointed in neat cement slurry and pointed in white/coloured cement to match the tiles. |
| 53 | Screed bed or bedding layer of mortar 15mm thick in CM 1:6for laying floor finishes |
| 54 | M&L rendering 10 mm thick in cement mortar 1:3on wall of brick work or concretesurface, finished fair and even. |
| 55 | M&L rendering 15 mm thick in cement mortar 1:6on brick work or concretesurface of wallsfinished fair and even. |
| 56 | M&L5 mm thick settingcoatin cement mortar 1:4over 10mm thick rendering in CM 1:6 on wall of brick work or concretesurface, finishedevenand smooth using extra cement. |
| 57 | M&L rendering 5 mm thick in cement mortar 1:3on ceilingofconcretesurface, finished even and smooth. |
| 58 | M&L for 50mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection , finish even & smooth without using extra cement all as specified and directed. |
| 59 | S&F framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into apikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framedwork or water tanks and similar work conforming to Fe 290gde E 165 |
| 60 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. |
| 61 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed. |
| 62 | Cement concrete 1:3:6 Type C 2 (using 40 mm graded aggregate)in suface channels and drains complete all as specefied. |
| 63 | M&L for preparing the new plastered surfaces and applying two coats ofcolorwash over a coat of wash white on wallsall as specified and direcrted. |
| 64 | M&L three coats of white wash on newly plastered or unplastered surfaces ofceiling including preparation of surface complete all as specified and directed. |
| 65 | M&L for preparing the new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer. |
| 66 | M&L for preparing the existing surface and applying a coat of bitumenous primer@ 0.30 litre / Sqm and then pressing & laying 3mm thick Atactic Polypropylene Polymer (APP) modified prefabricated with non woven polyester reinforced water proofing membrane weighing not less than 3.60 Kg/ Sqm comprising of centre core of 160 - 170gsm non - woven polysterapplication withtorchand thereover applying a tack coat of 85/25 blown grade bitumen @ 1.20 Kg / Sqm and finish the top surfaces with aluminium paint @ 0.150 Ltr / Sqm complete as per manufacturer\"s instructions. |
| 67 | Supply only Integral Water Proofing Compound complete all as specefied and directed. |
| 68 | M&L for treating the soil alongwith external perimeter of the buildingat the rate of 2.25 litres of emulsion per Rm of surface areaall as specified |
| 69 | M&L hardcore of brokenstones of gauge n exc 63mm, deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to true surface all as specified. |
| 70 | S&F Polythene film 50 micron complete all as specefied. |
| 71 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ,rough finished surfaces of conrete flat |
| 72 | M&L for125 mm thick PCC(1:2:4) type B2, (using 40 mm graded stone aggregate) and (1:4:8) type D2 finish even and smoothwith using extra cement complete all as specified. |
| 73 | M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces with 1:4.complete all as specefied and directed. |
| 74 | Supply and fixcounter WHB with 900 high mirror as per TD/specified including brass chromium plated waste fittingcomplete all as specified and directed. |
| 75 | Supply and fixvitreous china, wash hand basin, white, flat back, size 550 x 400 mm including brackets,brass chromium plated waste fitting. |
| 76 | Supply and fixvitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white, with integral foot rest . |
| 77 | Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) |
| 78 | Supply and fix , 10 litres capacity, PVC valve less,syphonicaction type flushing cistern, low level, white with inlet ball valve float, handle and flush pipe including brackets. |
| 79 | Supply and fixLooking Mirror of size 450x600 |
| 80 | Supply and Fix75mmbore cast iron soil, waste and vent pipe in any length laid in Floor complete all as specified and directed. |
| 81 | Supply and Fix75mmbore cast iron soil, waste and vent pipe in any lengthfixed to walls |
| 82 | Supply and Fix 100mm bore cast-iron soil waste and vent pipein any lengthlaid in trenches / floor |
| 83 | Supply and Fix100mm bore cast iron branch piece, single (equal or unequal), and ordinary or inverted or with parallel branches complete all as specified and directed. |
| 84 | Supply and Fix 100mm bore cast iron bends or diminishing pieces or tapers( larger bore measured) complete all as specified and directed. |
| 85 | DO But 75mm |
| 86 | S& cast iron Floor trap 75 mm dia withgrating |
| 87 | Supplied and fixed CI cowl 75 mm dia all as specified and directed. |
| 88 | M&l Gully Trap SGSW 150X150 |
| 89 | S&F bib taps, cast copper alloy with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed |
| 90 | Supply & fixedstop valves, 15mm dia, cast copper alloy,CP, fancy type screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 91 | S&F Pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" withlong screwed shanks and fly-nuts,screwed for iron pipe and fixed |
| 92 | S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges with Aluminium anodised |
| 93 | S&F Partition for Urinal vitreous china of size 310x700mm |
| 94 | S&F 15mm bore GI Pipe medium grade fixed to wall or laid in floor |
| 95 | S&F Rotational Moulded PVC water Storage Tank 1000 Lit Capaciy |
| 96 | S&F Rotational moulded polyethylene water storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all as specified in SSR- 500 Lit |
| 97 | S&FRotational moulded polyethylene water storage tanks (cylindrical verticalwith closed top) hoisted and fixed in position all as specified in SSR- 300 Lit |
| 98 | S&F SS pegs set 3 |
| 99 | Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out |
| 100 | M&L hardcore of brokenstones of gauge n exc 63mm, deposited spreaded, levelled in layers n exc 15 cm thick watered and rammed to true surface all as specified. |
| 101 | M&L 50 mm thick PCC (1:2:4) type B1, completed as specified and directed |
| 102 | M&L sand filling under floors or in foundation including watering and consolidation. |
| 103 | M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 104 | Providing, cement concrete, copings, kneelers, apex stones, bed plates, kerbs not providedfor in Item 04028, watertroughs and the like includingweathering, slightly roundedor chamfered angles andthroating, as directed |
| 105 | M&L for rendering 15 mm thick in cement mortar 1.4 on brick work or concrete surface of walls finished fair and even complete all as specilled and directed |
| 106 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, me Ired/stopped ends eic complete all as spaciled and directed |
| 107 | M & L Precast cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in slab flooring, bedded and jointed in cement mortar 1:6 and pointed in cament mortar 1.3 complete all as specified and directed. |
| 108 | Providing, cement concrete type BO 1:2.4(12.5 mm graded stone aggregata) in Coping, rounded or chamfered on edges complete all as specified and directed. |
| 109 | M&L Concrete bedto drain pipes of 150 mm includingpacking under, and haunching against the sides of pipes aller they ar elaid and 10 tested in CM 1:3:6 type C2 complete all as specified end directed |
| 110 | S&F Reinforced concrete pipes 150mm, class NP3, laid and jointed complete with collars complete all as specified and directed |
| 111 | M & L for Conventional type LLDPE septic Tank designed to carry sweage end sullage water, excation in any type of soil, PCC 1:4:8 below foundation, vent shall, connection etc, complete for 05 Users complete all as specified and directed. |
| 112 | M&L for Soakage well size 1.8m dia x 3.00m effective depth excavation in any type of soil foundation in PCC 1:3:6 walls and honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size, all as specified & directed. |
| 113 | Supply and laying DWC 50mm pipe SN8 laid in trenches for protection of cable all as specified anddirected by the Engr-in-Charge. |
| 114 | Supply & Fixing XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 25 sqmm 4 core all as specified and directed. |
| 115 | Supply & Fixing XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 16 sqmm 2 core all as specified and directed. |
| 116 | Supply & Fixing XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 10 sqmm 2 core all as specified and directed. |
| 117 | Supply & Fixing XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 70 sqmm 3.5 core all as specified and directed. |
| 118 | Supply & Fixing XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 95 sqmm 3.5 core all as specified and directed. |
| 119 | M&L for PCC (1:4:8) type D-2,using 40mm graded aggregate as in pole foundation/foundation of feeder pillar all as specified and as directed by Engr-in-charge. |
| 120 | Supply install testing and commissioning outdoor type LT feeder pillar box of suitable size, pedastal mounted, IP54 CPRI type tested factory made totally enclosed dust and vermin proof double leaf shutter in front and single leaf shutter in rear side made of 3.00mm thick CRCA sheet, framing with 50x50x6 mm thick MS angle iron and legs of size 0.5m long duly fabricated and having proper locking arrangement in both front and rear door with 4 slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500V, 50Hz, 3 phase 4 wire system and comprising with and including following accessories andmented on PCC platform made out of PCC 1:2:4, 100mm tick1m all round the panel board complete with following items housed in: Note:- (i) Danger notice plate should be fixed on both sides of the LT panel. (ii) After installation of panel each MCB should be indicated by paint that connection goes to which building. (iii) Rate of earthwork, excavation and PCC platform shall be deemed included in the quoted rate. (A)BUSBAR: 200 Amps rated Al busbar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite /DMC insulator busbar support (square/round) insulators of suitable size and good insulation resistance. (B)Incomer: (i) MCCB 4P of capacity 125 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 25 KA with thermal magnetic release -01No, () On load changelever 4P, capacity125A, 415V, 50Hz breaking capacity 25KA - 01 Nos (iii) 3 Ph digital Amphere meter Class 1 accuracy, 0.5 VA burden with LED display - 01 No (iv) 3 Ph digital Ammeter class 1 accuracy, 0.5 VA burden with LED display-01 no, (v) MModular indicator lamp with integral circuit (230V) and cluster LED (RED, YELLOW, BLUE) -01 set, (vi) Current Transformer (100/5A)-03 Nos. (C)Outgoings: (i) MCCB 4 Pole of capacity 63 Amp, breaking capacity 16 KA with thermal release -2 Nos, (ii) MCCB 4 Pole of capacity 40 Amp, breaking capacity 16 KA with thermal release - 3 Nos, (iii) MCB 4 Pole of capacity 32 Amp, breaking capacity 10 KA with thermal release -2 Nos, (iv) MCB 2 Pole of capacity 32 Amp, breaking capacity 10 KA with thermal release -1Nos, (v) Spare pocket fo MCCB - 1, (vi) Time Switches astro type (having longitude and latitude of Indian cities in memory) 250 V single phase of 20 Amp Rating With 3 phase 63A Contactor fitted inside steel enclosure - 01 Nos, (vii) MCCB 80 Amp, 16KA,4P-1 Nos |
| 121 | S & F 100 Amps 415V Step type busbar chamber box IP 54all as specified and directed. |
| 122 | S & F cable jointing kit for 1.1 KV grade cable for straight through/end joint complete with ininting material heat shring type and accessories suitable for 3.5/4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm, Indoor/Outdoor type |
| 123 | Supply install testing and commissioning outdoor type LT feeder pillar box of suitable size, pedastal mounted, IP 54 CPRI type tested factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.00mm thick CRCA sheet, framing with 50x50x6 mm thick MS angle iron and legs of size 0.5m long duly fabricated and having proper locking arrangement in both front and rear door with 4 slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 550V, 50Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC platform made out of PCC 1:2:4, 100mm thick, 1m all round the panel board complete with following items housed in: Note:- (i) Danger notice plate should be fixed on both sides of the LT panel. (ii)After installation of panel each MCB should be indicated by paint that connection goes to which building. (iii) Rate of earthwork, excavation and PCC platform shall be deemed included in the quoted rate. (A)BUSBAR :100 Amps rated Al busbar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite /DMC insulator busbar support (square/round) insulators of suitable size and good insulation resistance. (B)Incomer: (i)63A 4P changeover switch-01 no, (ii)40A 4P MCCB 18kA-01 no (iii) 3 Ph digital voltmeter class 1 accuracy, 0-500 V, 3 Ph, 4 digit with LED display -01 no(iv) 3 Ph digital Ammeter class 1 accuracy, 0.5 VA burden with LED display-01 no, (v) Modular indicator lamp with integral circuit (230V) and cluster LED (RYB)-01 set, (vi) CT (100/5A)-01. (C)Outgoings:- 32A TPN MCB 10KA-01nos. 32A DP MCB 10kA-02nos |
| 124 | Materials and labour for Cutting roads / hard standing to a depth not less than 45 cm and not less than 45 cm wide for laying of Gl pipe to draw the UG cable and making good the disturbed surfaces by filling of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate and finished the surface even and smooth with out using extra cement and disposed off the surplus debris and soil to a distance not exc 50 m complete all as specified and as directed by the Engr-in-Charge. |
| 125 | M & L for40mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed |
| 126 | Supply and fix octagonal poles of height 7.0 metres having top diameter 70mm and bottom diameter 139mm and sheet thicknes of 3mm having base plate of size 200x200x12 with appropiate size of foundation bolt as and specified by enginer-in-charge |
| 127 | Supply and fix PVC cable terminal boxes, outdoor type of size 1550mmx10mmx92mm polycarbonate, IP65 with MCB SP 6 to 32Amps including all necessary fittings and connection all as directed by Enginner-in-Charge |
| 128 | S&F Gl single arm bracket 1.5m long 40mm dia |
| 129 | S&F GI double arm bracket 1.5m long 40mm dia |
| 130 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 131 | Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm dia as earthing lead by means of bolts, nuts, check nuts and washers of Gl or steel, Gt strip proected by 40 mm bore light grade Gl pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. |
| 132 | S & F Air termination, single pointed aluminium rod 12mm dia and 300mm long. |
| 133 | S & F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hex. head screw |
| 134 | S & F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground |
| 135 | S & F Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 50mm height, 65mm dia for 550 volts grade. |
| 136 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre. BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 137 | S&F sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 4 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 4 sqmm as earth lead drawing into rigid non metalic PVC conduit of size 20 mm dia. Note: Three run of 4 sqmm cable will be measured as single length. |
| 138 | S&F plug and socket in sheet metal enclosures with two pin and earth plug and socket complete with and including MCB SP 20 Amps 240 volts heavy duty including taking town of old UNSV one all as specified and as directed by Engr-in-charge. |
| 139 | Supply & laying GI tubing medium grade of 20mm bore galvanised with all fittings laid in trenches complete all as specifed and as directed. |
| 140 | Supply & laying GI tubing medium grade of 15mm bore galvanised with all fittings laid in trenches on floor/ walls complete all as specifed and as directed. |
| 141 | Supply & laying GI tubing medium grade of 20.mm bore galvanised with all fittings laid in trenches on floor/ walls complete all as specifed and as directed. |
| 142 | Supply and fix Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed with 15mm bore |
| 143 | Supply and fix Ball brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed with 20mm bore |
| 144 | Supply and Fix DOL Starter FOR 1 HP Motor |
| 145 | Supply and fixing pumpset,cetrifugal,electric driven 1 HP AC single phase 230V inclusive of electrical connections and PCC foundation with MS frame and GI sheet cover. |
