|
| 1 | Earth work in excavation in soft/loose soil by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm but not exceeding 1.5 m in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m complete all as specified and directed |
| 2 | All as per item No. 2 above but depth exceeding 1.5 m but nexc 3.00 m complete all as specified and directed |
| 3 | M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 4 | M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stoneaggregateas in foundation,filling and mass concrete commplete all as specified and directed. |
| 5 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate asin foundations, including rafts, footings, foundation beams, plinth beams, foundation for columns, etc complete all as specified and directed. |
| 7 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surface complete all as specified and directed. |
| 8 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate asin columns,pillars etc complete all as specified and directed. |
| 9 | Use and waste of formwork to sides of pillars, posts, struts, piers,columns and stanchions for flat fair finished surface complete all as specified and directed. |
| 10 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 11 | Removing excavated material(Soil) exc. 1.5 km but n exc. 15 km and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 12 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate asinlintels beams and roof beams etc complete all as specified and directed. |
| 13 | Use and waste offormwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves ,plinth beam including supports, overhangs, etc. also splays between floors and beams, etccomplete all as specified and directed. |
| 14 | M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed. |
| 15 | M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per sqm of vertical surface, complete all as specified and directed. (Note: Area of the substructure in contact with backfill shall be measured.) |
| 16 | M&L for treating the top surface of filled earth at the rate of 5.00 litres of emulsion per sqm of surface complete all as specified and directed. |
| 17 | M&L treating the soil along with external perimeter of building at the rate of 2.25 litres of emulsion per metre of the perimeter wall, complete all as specified and directed. |
| 18 | M&L treating the soil under plinth protection at the rate of 5.00 litres of emulsion per Sqm, complete all as specified and directed. |
| 19 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate asinslabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the likeetc complete all as specified and directed. |
| 20 | Use and waste of form work to soffits of suspended slabs such as roof slabs, n. exc. 20cm thick (horizontal or sloping for fair finished concrete surface complete all as specified and directed. |
| 21 | Useand waste offormwork to flat surfaces of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engineer-in-Charge. |
| 22 | M&L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in chajjascomplete all as specified and directed. |
| 23 | S & F high strength corrosion resistant TMT steel bars of grade Fe 500D ,10 mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 24 | Ditto, as item No16 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 25 | M&L for Brick work with subclass ‘B’ old size fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed . |
| 26 | M&L for Brick work with subclass ‘B’ old size fly ash bricks, straight or curved on plan exc 6m mean radius in half brick thick walls in, built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 27 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 28 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4,mixed with integral water proofing compoundwith weight of cement in top layer as per manufacturer\"s instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 29 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 30 | M&L for10 mm thick rendering in CM 1:6 onfair face of brick workfinish the surface fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 31 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 32 | M&L for preparation of new platered surface of wall and applyingtwo coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced propertyover a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfacesincluding all necessary scaffolding,complete all as specified and directed.Note :-Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 33 | M&L for preparation of old decorated surface of wall by complete removal of existing treatment, washing, rubbing, stopping etc and applying two coats weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, having dart pick up resistant, silicon enhanced, UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed.Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS (ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 34 | M & L for preparing newly plastered surfaces of wall and applyingtwo coats of oil bound washable distemper over a coat ofprimer including applying one or more coat of wall care putty to get a smooth surface including making good any undulations on the surfacescomplete all as specified and as directed.Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS(ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 35 | M&L for preparation of old decorated surface by complete removal of existing treatment, washing, rubbing, stopping etc and applyingtwo coats of oil bound washable distemper over a coat ofprimer including applying one or more coat of wall care putty to get a smooth surface including making good any undulations on the surfacescomplete all as specified and as directed.Note :- (i) Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS(ii) Sanding of surfaces shall be done by mechanical sander with 1500-2700 rpm with internal dust extraction system for clean environment certified by the Paint manufacturer) |
| 36 | M&L preparing newly plastered ceilingsurfaces and applying two coat of white wash complete all as specified and directed. |
| 37 | Material and labour for prepration of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 38 | M & L for post construction Antitermite treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 39 | Taking down Chowkats or frames with shutters not exceeding 1.5 Sq. M Each (Without taking off shutters from the frames) complete all as specified and directed. |
| 40 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters without taking off shutters from frame complete all as specified and directed. |
| 41 | S&F Factory made UPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm +/- 0.2mm. Window profile with hollow section with multi chamber. Frame (112mm X 52mm),sliding sash (42mm X 67mm), Sliding mesh sash (42mm X 57mm),sliding interlock (One vertical length in each shutters) (45.50mm X 28mm). Glazing bead (24.50mm X 16mm) will be mitred cut and fusion welded at all corneres including railing of holes for fixing hardware and drainage of water of etc. Making arrangement for fixing of hardware EPDM gascade 1.2 +/- 0.2mm thick galvanized steel frame (30mmX18mm) 2 Nos, Sliding sash (30mmX18mm), Sliding mesh sash (26mmX10mm) profile to be inserted in required profile, frame will be fixed to wall with 8mm X 100mm long fastneres.Hardware [touch lock of zink alloyed (white powder coated),Steel roller system,stainless steel wire cloth of 0.36mm nominal dia of wire and avg width of aperature 1.40mm and required accessories].To be provided with proper operative and locking hardware mechanism, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak proof upto G+4th storey, each complete all as specifed and as per Manufacturer instructions. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 42 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 43 | Supply only 5.5 mm thick sheet glass ordinary quality in squares not exceeding 0.5 Sq.m in each pane complete all as specified and as directed. |
| 44 | S & F solid PVC door frame of size 100mm x 45mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete all as specified and directed. |
| 45 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 46 | S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified and directed |
| 47 | Supply only 12 mm thick, Prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminationfixed with screws to timber/metal frame work complete all as specified and directed. |
| 48 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, 150 mm overall length of cover plate with hard drawn steel spring, fixed in floorcomplete all as specified and directed. |
| 49 | S & F Aluminium (Die cast) body door Closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed. |
| 50 | S & F 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty/ aluminium/ wooden beading in square exc 0.5 sq. m in each pane all as specified and directed. |
| 51 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window / Ceosetory windows & other Frames/Chowkhat of size 65x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp ressive strength of 58N/mm2,modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of beingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetlycomplete all as specified and directed. |
| 52 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum comp ressive strength of58N/mm2,modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property ofbeingtermite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs /SS dash fasteners shall be paid for separetly complete all as specified and directed. |
| 53 | S&F 100 mm long SS butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 54 | S & F 150 mm long fancy type brass handles, cast type, polished bright complete all as specified and as directed. |
| 55 | S & F 200 mm size fancy type brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts complete all as specified and as directed. |
| 56 | S & F 300mm long fancy type brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and as directed. |
| 57 | Demolition of cement concrete (unreinforced) in any position not otherwise specifically provided for as in roof padding etc including old detoriated roof treatment and bedding layer and removing debries and rubbish to a distance outside MD land complete all as specifed and directed. |
| 58 | M & L for brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed |
| 59 | Material & labour for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm gaded stone aggregate laid on RCC roof slab to make surface levelled for proper slope finish the surface even and fair complete all as specified and as directed. |
| 60 | M & L for 10 mm thick, screed bed as in roof in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces and finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer\"s instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately) |
| 61 | M&L for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:-(a) Preparing and cleaning of fully dry surfaces as per IS3067-1966(b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface.(c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application.The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane. |
| 62 | Taking up or down steel tubing 20 mm dia bore including all connection complete all as specified and directed |
| 63 | S&F 20 mm dia ,3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or infloors etc complete all as specified and directed. |
| 64 | Taking up or down 25 or 32 mm bore steel tubing and connections, complete all as specified and as directed. |
| 65 | S&F 25 mm dia ,3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or infloors etc complete all as specified and directed. |
| 66 | S & F in repair 25 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 67 | S & F in repair 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 68 | S & F in repair 15mm bore, bib taps, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 69 | S & F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 70 | S & F inrepair 125 mm size, shower rose, brass chromium plated, swival type, complete all as specified and directed. |
| 71 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 72 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth as in brick wall complete all as specified and directed. |
| 73 | S & F in repairvitreous China wash down water closet pan (pedestal pattern) of size350x480x395 mm white, including connection to outgoing drain andflushing pipe, anti syphonic pipe, P or S trap with PVC water closet seat cover, black or white or coloured ,closed pattern with flat bottom andmild steel chromium plated hinging device complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and directed. |
| 74 | S&F in repair 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white,with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. |
| 75 | S&F in repair stainless steel soap dish holder, fixed in walls with plugs & chromium plated brass screws complete all as specified and directed. Make: Cat No. ACN-1131N of Jaquar or its equivelant model of make as per list of manufacturer |
| 76 | S&F in repair Toilet paper holder with with flap recessed type, chromium plated fixed to wall with brass screw complete all as specified and directed Make: Jaquar Cat No.ACN-1153S or equivelant of make as per List of manufacturer\"s mentioned in PS. |
| 77 | S&F in repair vitreous China wash basin, size 550 x 400mm, white, flat back, with PVC waste pipe, CP waste coupling, chain, plug and porcelean stopper & backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed. |
| 78 | S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, chromium plated with long shank and cup, concealed type, screwed downhigh pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 79 | S & F in repair 15 mm bore fancy type chromium plated angular stop cock with wall flangecomplete all as specified and directed . Make: Jaquar Cat No. FLP-5053PM or equivelant of make as per List of manufacturer\"s mentioned in PS. |
| 80 | S & F32mm dia flexible PVC waste pipe, 900mm long for wash basin/sink/urinal etc complete all as specified and directed. |
| 81 | S & F in repair 15 mm bore fancy type chromium plated pillar tap quarter turn for wash hand basin complete all as specified and directed .Make: Jaquar Cat No. FLP-5011PMor equivelant of make as per List of manufacturer\"s mentioned in PS. |
| 82 | S & Fin repairs, CP, wall mixer for mixing hot & cold water with provision for overhead shower with 115mm long bend pipe on upper Side, connecting legs & wall flanges complete all as specified and directed. ( Make:CAT NO - CON-273KNUPR of JAQUAR or equivalent model from approve list of Make.) |
| 83 | S & F in repair 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed. Make: Jaquar Cat No. ALD-573 or equivelant model of make as per list of manufacturer mentioned in PS. |
| 84 | Dismantling 100mm bore, cast iron or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required and as directed. |
| 85 | S & F 110mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 86 | S&F 110 mm bore PVC [ SWR ] WC connector with lip ringcomplete all as specified and as directed. |
| 87 | S & F 110 mm borePVC (SWR) junction single, (Single T) equal or unequalincluding jointing with solvent cement complete all as specified and as directed. |
| 88 | S & F 110 mm bore PVC [SWR] bends of any radius with access door including jointing with solvent cement complete all as specified and as directed. |
| 89 | S & F 110 mm bore PVC [SWR] vent cowl including jointing with solvent cement complete all as specified and as directed. |
| 90 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 91 | M & L for double charged Vitrified, designed, light dark shade coloured tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but n exc 1.00Sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 92 | M & L for double charged Vitrified, designed, light dark shade coloured tiles, 7 to 8 mm thick, (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but n exc 1.00Sqm ,as in vertical surfaces such as Skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. |
| 93 | M & L for non skid ceramic tiles, joint free, light shade coloured, premium quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 94 | M & L for glazed, coloured, ceramic, tiles of size 450mm x300mm x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. |
| 95 | M & L for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) in floors, steps, jambs, pillars, window-cills, cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed in cement mortar 1:6 & cutting, polishing complete all as specified and directed. |
| 96 | Providing edge moulding to 18-20mm thick marble stone any description of counters ventities etc including machine polishing to edge to give high gloss finish etc complete all as specified and directed by Engineer-in-Charge. |
| 97 | Removing building materials etc. (other than spoil)out side MOD landto a distance exc 5 km but nexc 10 Km, beyond the lead, including loading, unloading and stacking at the destination complete all as directed. |
| 98 | M & L for 75 mm thick,plain cement concrete1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 99 | M & L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed to a true surface including watering complete all as specified and directed. |
| 100 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as directed |
| 101 | Taking down unserviceable main switches, DBs, bus bars chambers any capacity including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified anddirected. |
| 102 | Taking down unserviceable sub-main wiring (any numbers of cable) withrigid steelconduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed. |
| 103 | M & L for conceledPoint wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLSH (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore (Minimum) medium grade (ISI marked) concealed type includingmetal GI boxes of suitable module including modular white cover plate of suitable module for fixing modular type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductorcable FRLSH [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed,for one light/exhaust fan/fan point/call bellcontrolled by one way switch.(Note.: (i) The rate quoted is deemed to include making good the disturbed sufaces and to match the adjoining surface. (ii) The quoted rate is deemed to include cutting chases for concealed wiring including making good the same as per the existing one) |
| 104 | All as per item No. 185 above but for One 3/5 pin socket outlet 6 amps on independent board complete ditto |
| 105 | All as per item No. 185 above but for One 3/5 pin socket outlet 6 amps pointon same boardcomplete ditto |
| 106 | All as per item No. 103 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 Sqmm multistrandedFRLSH (ISI marked) and 2.5 Sqmm PVC insulated unsheathed solid copper conductor cableFRLSH (ISI marked) as earth lead complete ditto |
| 107 | All as per item No.103 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 4.00 Sqmm multistrandedFRLSH (ISI marked) and4.00 Sqmm PVC insulated unsheathed solid copper conductor cableFRLSH (ISI marked) as earth lead complete ditto |
| 108 | S & F switch modular single pole one way 6 amp 240 volts,1 Module complete all as specified and as directed. |
| 109 | S & F Modular socket outlet6A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed. |
| 110 | S & F switch modular single pole one way 16 amp 240 volts,1 Module complete all as specified and as directed. |
| 111 | S & F Modular socket outlet6A/16A, 2/3 pin combined, 2 module, AC 230V, 50HZ complete all as specified and as directed. |
| 112 | S & F steped type modular fan regulator ,100/120 W 2 module complete all as specified and as directed. |
| 113 | S&F ceiling rose, 65 X 50mm two to three teRminals, PVC/polycarbonate, insolated body complete all as specified and directed. |
| 114 | M & L for Sub main wiring with 2 runs of Single core 2.5 Sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including surface PVC conduit of suitable size with all conduit accesories and fittings along with 1 run of single core 2.5 Sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cableas earth continuity conductorcomplete all as specified and as directed.(Note :- Two runs of 2.5 Sqmm and one runs of 2.5 Sqmm cable as earth wire and one run of conduitshall be measured as one length) |
| 115 | M & L for Sub main wiring with 2 runs of Single core 6 Sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including surface PVC conduit of suitable size with all conduit accesories and fittings along with 1 run of single core 6 Sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cableas earth continuity conductorcomplete all as specified and as directed.(Note :- Two runs of 6 Sqmm and one runs of 6 Sqmm cable as earth wire and one run of conduitshall be measured as one length) |
| 116 | M & L for Sub main wiring with 4 runs of Single core 10 Sqmm [ for Phase & Neutral ]PVC insulated multi stranded FRLSH (ISI marked) copper cable drawn through and including surface PVC conduit of suitable size with all conduit accesories and fittings along with one run of single core 10 Sqmm PVC insulated multi stranded FRLSH (ISI marked) copper cableas earth continuity conductorcomplete all as specified and as directed.(Note :- Four runs of 10 Sqmm and one runs of 10 Sqmm cable as earth wire and one run of conduitshall be measured as one length) |
| 117 | S&F Socket Residual Current Device (SRCD) With Steel Enclosure two pin and earth plug including 20 Amps MCB SP complete all as specified and as directed |
| 118 | S & F Vertical TPN DB double door for provision for four pole MCCB upto 200 Aincommer 4 way 12 outgoing with IP 43 protectioncomplete all as specified and as directed. |
| 119 | S & FMCCB 415 Volt, 25 KA, 4 Pole, 200 Amps Capacity with fixed thermal magnetic protection unit complete all as specified and as directed. |
| 120 | S & F powder coated sheet steel Distribution Board, TPN 6 Way, vertical , 415V, Double door with IP 43protection, IK 09 complete all as specified and as directed. |
| 121 | S & F powder coated sheet steel Distribution Board, SPN 8 Way, vertical , 240V, Double door with IP 43protection, IK 09 complete all as specified and as directed. |
| 122 | Supply, fixing, commissioning and testingMCB TPN63Amps, 240 Volts,10KA, C Curve complete all as specified and as directed |
| 123 | Supply, fixing, commissioning and testingMCB TP40Amps, 240 Volts,10KA, C Curve complete all as specified and as directed |
| 124 | Supply, fixing, commissioning and testing MCB SPN 32 Amps, 240 Volts, 10KA, C curve complete all as specified and as directed |
| 125 | Supply, fixing, commissioning and testingMCB SP 6-32A Amps, 240 Volts,10KA, C Curve complete all as specified and as directed |
| 126 | S&F LED Ceiling light fitting 35/36 watt recess type flat panel 600x600 mm fabricated CRCA sheet housing duly powder coated with high efficient LED`s & glare free high efficiancy PMMA diffuser complete with driver, holders & LED lamp and all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specifide and directed. |
| 127 | S&F LED lights fitting 1x 20W, 220V, including lamp AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 128 | S&F LEDlight fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 129 | S&F LED building security light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including theRmal management in triple optics complete with IP 66 protection with and including 1.5 Sqmm weather proof 3 core FRLH grade copper conductor and 32 mm dia( or higher size as per manufacturers recommendation)light grade GI pipe (bend to shape or as per manufacturers recommendation ) bracket 1.5 mtr longcomplete with MS flat iron clamp (clamps shall be 40 x 5 mm MS flat) nuts, bolts & washers including painting the clamps with two coat of aluminium paint over a coat of red oxide primercomplete all as specified and as directedcomplete all as specified and directed |
| 130 | S&F modular tupe Telephonic socket with shutter (RJ-11)-1M complete all as specified and as directed. |
| 131 | S&F modular tupe TV socket -1M complete all as specified and as directed. |
| 132 | Taking down the ceiling fan of any size/sweep/make from existing position dismantling blades ,spare parts for cleaning,servicing,oiling and lubricating etc including preparation of old painted surfaces of ceiling fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with fillerand marking same MES No. with parmanent marker, refixing the blades and re-hanging the fan in its original position,connecting up etc complete all as directed. |
| 133 | Taking down the wall mounted fan of any size/sweep/make from existing position dismantling blades ,spare parts for cleaning,servicing, oiling and lubricating etc including preparation of old painted surfaces of wall mounted fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality white) paint by spraying including filling cavities with fillerand marking same MES No. with parmanent marker, refixing the blades and re-fixing the fan in its original position,connecting up etc complete all as directed. |
| 134 | Taking down the exhaust fan of any size/sweep/make from existing position dismantling blades,spare parts for cleaning,servicing,oiling and lubricating etc including preparation of old painted surfaces of exhaust fan of any size/sweep/make, cleaning all dust etc and painting with one coat of synthetic enamel (1st grade quality) paint by spraying including filling cavities with fillerand marking same MES No. with parmanent marker, refixing the blades and refixing the fan in its original position,connecting up etc complete all as directed. |
| 135 | M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth strip of size 32x6 mm by means of bolts, nuts,check nuts and washers protected by 15mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia defoRmed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar),including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect all as shown in electrical plate No. 3 and other end connected with main switch board or Earthing test point as directed,including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessarytesting on completion complete all as specified and as directed by the Engineer-in-Charge.Note: On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost |
