|
| 1 | All items Contained in Delhi schedule of Rates 2023 for Civil works with Upto date correction slips. (DSR items Rates are inclsive of Correction factor (-)0.027, CP&OH correction \"5/115\" and Cost index for Guwahati @ 119 over the DSR base index 107. Multiplication factor : 1.0350727) |
| 2 | Repairs to side hung steel window leaves of size 450x1200mm approx. against improper functioning including replacing the existing faulty hinges by box type hinges, making good the jambs and soffits for free movement of window leaves complete as per of direction Engineer-in-Charge. |
| 3 | Removal of chockage of floor trap, Nahani trap, water closet and associated C.I. pipe and bend to effect smooth flow of wastes by pressure pushing, flexible wire and taking out refuses and dispose off etc. all complete as per direction of Engineer-in-Charge. |
| 4 | Cleaning of sewer manholes etc.,at all depths. cost includes all labour for removing the sludge, silt, slush, waste etc., from the manholes and rodding the sewer lines by mobile sewer roding equipment from manhole to manhole to clear the blockage, including chokes in gully traps etc.and disposing the waste outside the compound etc.,(No of Manhole will be counted for payment,) |
| 5 | Engagement of plumber for attending and rectifying day to day plumbing maintenance complaints for various buildings including technical building and staff quarters. The rate is inclusive of all T&P required, scaffoldings, jhula, ladder etc., and all necessary safety measures for working on external surface. All materials required for maintenance works shall be paid in separate item. The complaints shall be attended at once during working hours or at any time as per requirement. No transportation charges will be paid for attending the complaints at various locations under kamrup BA. All complete as per direction of Engineer-in-Charge. |
| 6 | Engagement of Carpenterfor attending and rectifying day to daycarpentry repair works for various buildings including technical building and staff quarters. The rate is inclusive of all T&P required, scaffoldings, jhula, ladder etc., and all necessary safety measures for working on external surface. All materials required for maintenance works shall be paid in separate item. The complaints shall be attended at once during working hours or at any time as per requirement. No transportation charges will be paid for attending the complaints at various locations under kamrup BA. All complete as per direction of Engineer-in-Charge. |
| 7 | Labour (Beldar / sweeper) Supply for miscellaneous works such as cleaning of terrace or other maintenance works, help to plumber etc. on per day basis as per requirement and direction of Engineer-in-Charge. The rate is inclusive of all T&P required, scaffoldings, jhula, ladder etc., and all necessary safety measures for working on external surface. All materials required for maintenance works shall be paid in separate item. The complaints shall be attended at once during working hours or at any time as per requirement. No transportation charges will be paid for attending the complaints at various locations under Kamrup BA. |
| 8 | Clearing ofchoked rain water pipes,sanitary pipes etc.manually/ mechanically (one pipe connection upto a length of 6.00 Mtr)all complete as per the direction of the Engineer-in-charge. |
| 9 | Cleaning of septic tank upto 8.00 Cum capacity (excluding free board) i/c disposal of sludge by either engaging mechanical cess pool cleaning wherever feasible or by engagement of manual labour in a pit including earth work in excavation and refilling after sludge disposal upto a lead of 50m all complete as per the direction of the Engineer-in-charge. |
| 10 | Extra for cleaning of Septic tankbeyond 8.00 Cum (excluing free board) capacity of Septic tank |
| 11 | Repairing of wash basin including changing of theC.I. Brackets / waste couplings etcincludingcutting and making good the walls wherever require : |
| 12 | Repairing of P.V.C. low level flushing cistern including replacing of the control device handle lever, Syphon, bend pipe, washer etcwhichever required and make it in workable conditions all complete as per direction of the Engineer-in-charge. |
| 13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) ball valve, having thermal stability for hot & cold water supplyincludingjointing with pipes & fittings by one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. :Internal work - Exposed on wall. |
| 14 | a) 20 mm nominal outer dia .Pipes. |
| 15 | b)25 mm nominal outer dia .Pipes. |
| 16 | c) 32 mm nominal outer dia .Pipes. |
| 17 | d) 40 mm nominal outer dia .Pipes. |
| 18 | e) 50 mm nominal outer dia .Pipes. |
| 19 | Supplying and fixing of PVC water storage tank covers of any sizes including necessary fixtures etc all complete as per direction of the Engineer-in-charge. |
| 20 | Hiring of Electric Welding Machine at site for miscellaneous repairs including carriage, electrode etc. for a full working day with one assistant black smith and one beldar all complete as per direction of Engineer-in-charge. |
| 21 | Providing at site of work various sanitary/ water supply fittings/ items of approved and ISI quality as and when required and as decided by the Engineer-in-Charge for day to day maintenance works. (Note: Labour shall be covered in the relevant agreement item.) |
| 22 | a) White solid plastic seat with lid for pedestal type W.C pan complete. |
| 23 | b) Internal fitting kit, complete for 10 litre low level P.V.C. flushing cistern |
| 24 | c) Supplying Brass Spindle / face for brass / CP brass Bib Cock/Angle Valves/Pillar Cocks etc. |
| 25 | d) Flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 26 | i)32 mm dia. |
| 27 | e)PTMT Waste coupling for wash basin and sink, of approved quality and colour. |
| 28 | i)31 mm dia. |
| 29 | f) C.P/ P.V.C. bend for flushing cistern. |
| 30 | i) P.V.C. bend 32 mm dia. |
| 31 | g) Unplasticised P.V.C. Connection pipe with PTMT nuts, collars and bush of approved quality and colour. |
| 32 | i)15 mm nominal bore and 45 cm long. |
| 33 | h)PTMT Pillar cock of approved quality and colour. |
| 34 | i)15 mm nominal bore, 107 mm long, weighing not less than 110 gms. |
| 35 | i)PTMT bib cock of approved quality and colour. |
| 36 | i)15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 37 | j)PTMT stop cock of approved quality and colour. |
| 38 | i)15 mm nominal bore, 86 mm long, weighing not less than 88 gms. |
| 39 | k)C.P. Brass bib cock. |
| 40 | i)15 mm nominal bore. |
| 41 | l)C.P. Brass bib cock 2-in-1. |
| 42 | i)15 mm nominal bore. |
| 43 | m)C.P brass pillar cock. |
| 44 | i)15 mm nominal bore. |
| 45 | n)CPVC Pipes. |
| 46 | i)20 mm outer dia. |
| 47 | ii)25 mm outer dia pipes. |
| 48 | iii)32 mm outer dia pipes. |
| 49 | iv)40 mm outer dia pipes. |
| 50 | o)CPVC Union of supreme or equivalent make. |
| 51 | i)for 20 mm outer dia pipes. |
| 52 | ii)For 25 mm outer dia pipes. |
| 53 | iii)For 32 mm outer dia pipes. |
| 54 | iV0For 40 mm outer dia pipes. |
| 55 | p)P.V.C. clamp for 20 mm dia CP.V.C. pipes |
| 56 | q)UPVC pipe 4 kg Pressure of best make. (i) 75 mm dia pipes. |
| 57 | r)UPVC pipe 4 kg Pressure of best make. (i) 110 mm dia pipes. |
| 58 | s\)Clampfor P.V.C. Pipes. (i) for 75 mm dia pipes. |
| 59 | t)Clampfor P.V.C. Pipes. (i) for 110 mm dia pipes. |
| 60 | Providing and fixing door seal of approved quality with screws all complete as per direction of Engineer in charge. |
| 61 | Extra for providing and mixing water proofing material of Dr Fixit LW+ or equivatentin cement concrete / mortar work in doses by weight of cement as per manufacturer’s specifications |
| 62 | Removingtree growth on building walls upto a height of G+3 storied buildingincluding cutting the tree and addressing the root system, potentially using a herbicide spray or injection for more effective root removalincluding disposal of the malba out of municipal limit including repair of roof/wall with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) all complete as per direction of engineer-in-charge.(The item included all labour,T&P,material in above operation |
| 63 | Providing and fixing aluminium sheet of minimum thickness 24 gauge with screws, moulding on edges etc all complete as per direction of the engineer-in-charge. |
| 64 | Providing & erecting single scaffolding system on the external side of building upto three storey height made of best quality bamboo ballies @ 1.50 m centre to centre in both directions including bracing & stiffening as required. |
| 65 | Attending leakage from the nahani trap by dismantling the tiles,nahani trap,Cement concrte around it, replacing dismantled nahani trap with new 2 way nahani trap of approved quality 110mm x 75mm dia including providing and fixing 110mm dia PVC pipe in 110mm side of trap 15mm below finished floor level.(approx length 10 to15cm) , jointing of pipe and filling outer space of trap with cement mortor 1:3 (1Cement:3 coarse sand )and finishing top with white cement to match shade of tile etc. all complete as per the direction of Engineer in charge. |
| 66 | Arresting leakage through GI pipe by cutting and dismantaling upto length of 10.00 Metre and fixing the same includinmg providing and fixing G.I. Union , cutting and threading the pipe and making long screws, etc complete |
| 67 | a)Upto 25 mm nominal dia pipes |
| 68 | b)above 25 mm nominal diaupto 50 mm nominal dia pipes |
| 69 | Cleaning of open drainage in the compound including removing the sludge, silt, slash, waste etc., from the drains and disposing the waste out side the compound etc., complete and to ensure proper disposal of rain water in the compound as per the direction of the Engineer-in-charge. |
| 70 | Cleaning of drainage line of diameter upto 200mm dia in the compound consisting of manholes, sewer lines, gully traps etc., including removing the sludge, silt, slash, waste etc., from the manholes and disposing the waste out side the compound etc., complete as per the direction of the Engineer-in-charge. |
| 71 | Deep cleaning of ceramic tile flooring / dado by rubbing with scrubbers, using mild acid and detergent powder complete as directed. |
| 72 | Providing and fixingPTMT Health faucet of approved make fitted with 1.00 Meter Flexible Hose Pipe and Wall Hook (Jet Spray for Toilet) and making good the wall etc., complete as directed by the Engineer-in-charge. |
| 73 | i)Providing and fixing PTMT health faucet with 1.00 Meter Flexible Hose Pipe including holder complete etc., |
| 74 | Providing and fixing UPVC floor trap 100mm dia inlet and 75mm dia outlet. complete all as directed by the Engineer-in-charge. |
| 75 | Providing and fixing Vertical Blindsmade up of distinct fabrics pane of good quality material and approved pattern with necessary fixtures and hangers etc. complete all as directed by the Engineer-in-charge. |
| 76 | Deep cleaning toilet / Bath rooms including floor & wall tiles, sanitary fittings, water supplying fittings, mirrors, doors and windows using bleaching powder / Harpic / Lizol / or equivalent as per requirements and putting Odonil or equivalent as per requirements and putting Odonil or equivalent freshners at places as directed by the Engineer-in-charge. this includes cost of all labours, materials and all incidental complete. |
| 77 | Credit of old un- serviceable materials recovered from dismantling / demolishing from work: ( NOTE :It shall be ensured that material are in broken / damaged and completely unserviceable condition for which test check shall be carried out by the Engineer - in -charge before effecting payment ) |
| 78 | a)unserviceable recovered scrap steel bars / grills: |
| 79 | b)Old unserviceable Brass / CP Brass items such as bib cock, stop cock, pillar cock gate valve and other fitting etc. |
| 80 | c)Old Unserviceable C.I./G.I./M.S. Items |
| 81 | d)Old Unserviceable Aluminium Items |
| 82 | e)Old Unserviceable aluminium floor spring |
| 83 | f)Old Unserviceable wooden door shutters |
| 84 | g)Old Unserviceable CPVC/PVC/PTMT Items, Water storage Tanks |
