|
| 1 | Taking down chowkhat (including grills/wire mesh) with shutters n.exc 1.50 Sqm each (without taking off shutters from the frame) complete all as specified and as directed. |
| 2 | Taking down chowkhat (including grills/wire mesh) with shutters n.exc 1.50 Sqm but n.exc 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and as directed. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each.complete all as specified and as directed. |
| 4 | S&F pressed steel door frame 125x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed (pcc filling of holloow section measured and paid seprately) |
| 5 | S&F pressed steel door frame 105x60 mm for doors with one or more rebates including necessary fixing lugs hinges lock strike plates comlete as specified and directed Note:-(pcc filling of holloow section measured and paid seprately) |
| 6 | M & L for PCC typeC-1,1: 3:6 (using 20mm graded crushed stone aggregate) for cills,hold fast filling of hollow of pressed steel door frame etc,complete all as specified and as directed. |
| 7 | S &F 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.20 (a).complete all as specified and as directed. |
| 8 | S & F for 35mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides.complete all as specified and as directed. |
| 9 | S & F for solid PVC door frames of sizes 50mm x 47mm made out of 5mm but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheetreinforced with MS Square tube complete all as specified and as directed. |
| 10 | S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with particle board core, supplying & fixing in frame at site as per specification & drawing.complete all as specified and as directed. |
| 11 | ECO – 4000 SeriesWindows (Double Rebate Windows)Providing & Fixing Windows/ ventilators fabricated from roll framed sections made of galvanized steel colour coated/ powder coated (Base steel as per IS 513 “D” quality galvanized as per IS 277 with zinc of 120 gms/Sqr. Mtr.) with total coated thickness of 0.58mm.complete all as specified and as directed.Paint Specifications:Coated sections should be with Primer coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick or Powder Coated with pure polyester up to 50-60 microns thick.Dimensions of Sections:Sections for Frame should be of 72mm x 55mm, Section for Mullion should be of 72mm x 50mm, Section for Shutter Frame should be of47mm x 20mm, Section for Fixed Glass Bead should be of 12mm x 12mm, and Section for Fly Mesh should be of 40mm x 20mm.Fixing Details: Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined with Frame/Mullion using Mullion Cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon Section should be used around Fly mesh to fix Mesh in Mesh Shutter.Accessories:Each Glazed Shutter and Mesh shutter should be provided with SS Pivot Hinges – 1 set, Seccolor Handle & Seccolor Stay.Window Frame should be fixed to brick/ concrete masonry by using Nylon self expanding caps and driving MS electroplated 80mm long screws into the caps through frameMesh Shutter should be provided with a Stainless SteelFly mesh of 304 grades. Make:-Elixir/NclGrill:Windows should be provided with Grill made of 10mm sq. MS Bars welded to at 150mm center-to-center, 5mm x 10mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. |
| 12 | S &Ffor framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars(for windows); barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work (Cupboard frame) conforming to Fe 290. Grade E-165. complete all as specified and as directed. |
| 13 | S&F for 300 mm long helical door springs including roller plate complete all as specified & directed. |
| 14 | S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor.complete all as specified and as directed. |
| 15 | S & F for 125mm butt hinges heavy weight cold rolled mild steel complete all as specified & directed. |
| 16 | S & F for 100mm butt hinges heavy weight cold rolled mild steel complete all as specified & directed. |
| 17 | S & F for 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed. |
| 18 | S & F forAluminium anodised barrel tower bolts 200mmof extrded section complete all as specified & directed. |
| 19 | S & Ffor Aluminium anodised barrel tower bolts 125mmof extrded section complete all as specified & directed. |
| 20 | S & F for 300mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of seat cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 21 | S & F for 100mm aluminium hasp and staple complete all as specified and as directed. |
| 22 | S & F for MS hold fast (FI 25X3, 250mm long) conforming to Fe-290, Gde E-165, complete all as specified and as directed. |
| 23 | S&F for Stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm.complete all as specified and as directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement morytar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed. |
| 25 | Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed. |
| 26 | M& L for 25mm thick PCC 1:2;4 type B-0 (using 20mm graded crushed stone aggregate) as in sub base of tiles and surface even and smooth without using extra cement complete all as specified and as directed. |
| 27 | S & F for Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including laying over 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 28 | S & F Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of 15mm thick in CM 1:6.complete all as specified and as directed. |
| 29 | S & F for glazed ceramic coloured tiles of size 300x450x7mm thick in vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:3.complete all as specified and as directed. |
| 30 | M&L for RCC slab (Nominal mix )TypeB0 1:2:4 (using 12.5mm graded crushed stone aggregate) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like.complete all as specified and as directed. |
| 31 | M&L for Mild steel TMT bars 10mm diaand over cut to length, bent to shape required, including crancking bending spirally for hooping for columns, hooking ends and binding/welding with existing reinforcement and including mild steel wire not less than0.9 mm dia or securing with clips complete all as specified and directed |
| 32 | M&L for Formwork flat to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick complete all as specified and as directed. |
| 33 | M &L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and half moulded at one side including demolition of old stone any type complete all as specified and as directed. |
| 34 | Demolition of brick work or stone boulders masonry built in Cement mortar (or) cement lime mortor including all quions, arches, pillars etc.complete all as specified and as directed. |
| 35 | M&L for brick work with sub class \"B\" bricks straight or curved on plan exceeding 6m mean radinsbuilt in cement mortar 1:6.complete all as specified and as directed. |
| 36 | M & L for brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed. |
| 37 | Removal of damaged concrete along with loose damaged and cracked concrete/cover concrete at all specified locations up to beyond the corroded steel reinforcement to a depth of 10 mm minimum behind the reinforcement by chipping/hacking with chisel and hammer or by mechanical means like chisel hammer, pneumatic chipper including high pressure water jetting to chipped concretand reinforcement and removal and disposal of debris within owners premises including all plant and machineries. Hard concrete shall not be removed. However if the rebar is corroded, concrete around it shall be removed. Depth of chipping may very from 50 mm to150 mm complete with labor, machinery, tools etc. all a directed by Engg.in charge. The edges of repair locations shall be saw cut to a depth of at least 10 mm to avoid feather edgeing and provide a square edge. Removal of dust, loose particles, marine growth etc. from concrete surface manually by wire brush, mechanically or any other means to obtain a sound surface over areas other than above.complete all as specified and as directed. |
| 38 | Cleaning as directed & specified all rust/ scales/corrosion from reinforcement bars using rust remover agent like Reebaklens RR of Fosroc or equivalent having Specific Gravity 1.16 - 1.22. The material to be applied to the rusted metal using brush and make leaving to dry for 30 mins & washing surface with fresh water as required to exposed reinforcement bars complete all as specified and as directed. |
| 39 | Providing and applying bond coat on the prepared surface to receive polymer modified mortar/polymer modified micro concrete, with two component epoxy based bonding coat Nitobond EP Std of Fosroc make or equivalent of Dr Fixit pidilite,stp, having specific gravity 1.15 to 1.2 gm/cc, Compressive strength(BS 6319 Pt.2)- 50 Mpa at 7 days, Flexural strength strength(BS 6319 Pt.3)- 35 Mpa at 7 days, Tensile strength (BS 6319 Pt.7)- 20 Mpa at 7 days, Shear Strength (BS 6319 Pt.4)- 10 Mpa at 7 days, having an over lay time of 6 hrs. and 300 C. Laying of reinstatement polymer modified mortar or micro concrete shall be completed within the overlay time of bonding coat. The bond coat act as a bonding coat between old and new concrete. Item rate is inclusive of materials all Labour, tools and tackles, scaffolding and transportation etc. complete all as specified and as directed. |
| 40 | Providing and laying of polymer modified single component, alkaline resistant fiber reinforced, thixotropic, cementitious patch repair mortar Renderoc SP 40 of Fosroc make or equivalent of Dr Fixit pidilite,stp, that achieves compressive strength (BS 1881 Pt.116) -> 20 Mpa at 1 day & > 45 Mpa at 28 days, Tensile Strength (BS 6319 Pt.7) > 2.5 Mpa at 28 Days, Flexural Strength (BS 6319 Pt.3)>7 Mpa at 28 days, Drying shrinkage to ASTM C 157-93, 28 days < 1000 micro strain. Finishing the same with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slabs, piles etc., where the thickness of application is average 30 mm in patches as per specification after applying bonding coat (bonding coat shall be payable separately). Item rate is inclusive of materials all Labour, tools and tackles, scaffolding and transportation etc. complete all as specified and as directed. |
| 41 | M & L for rendering 5mm thick in CM 1:3 rendering on cocrete surface such as ceiling chajjas etc finished evena and smooth (without using extra cement) complete all as specified and as directed. |
| 42 | M & L for rendering 10mm thick in CM 1:3 on roof concrete surface while concrete is green mixed with water proofing compound compound @ 3% by weight of cement or as per manufacturer\"s instruction including finished the surface smooth and even without using extra cement.complete all as specified and as directed.Note:-WPC will be measured and paid separately. |
| 43 | M&L for priming the plastered roof surfaces with bitumenous primer @ 0.30 kg over applying hot bitumen VG-30 1.2kg/Sqm and applying APP based polymeric membrane weighing 3 kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/per sqm) and on primed surface by forced torch application over that applying bitumen base alluminium Paint 0.2 Kg/Sqm including complete removal of old APP membrane complete all as specified and as directed. |
| 44 | M&L for 40mm Thick PCC (1:2:4) Type B1 by using 20mm graded crushed stone aggregate as in roof mixed with water proofing compound @ 3% by weight of cement or as per manufacturer\"s instruction, where required over slab and necessary form work and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed.. Note:-WPC will be measured and paid separately. |
| 45 | M & L for rendering 15mm thick on concrete or fairfaces of brick work in CM 1:4, finished even and smooth without using extra cement but mixing WPC complete,all as directed and as specified (Note:-WPC measured and paid separately).After plastering the sunken surface, sunken portion to be filled with water and tested for 72 hrs (after required period of curing) to observe leakage/seepages, leakages/seapage if any shall be arrested by pressure grouting and re-tested till leakage/seepages completely stopped.After pointing test, the surface shall be dried and bottom and sides of the sunken slabs shall be treated, priming the plastered surface with bituminous primer conforming to IS-3384 @ 0.3 Kg per Sqm and applying a tack coat of industrial bitumen 85/25 @ 1.2 kg per Sqm over which applying using glass fibre base bituminous felt type II and grade 2 (conforming to IS-7193 1994) and applying one coat of hot blown bitumen of grade 85/25 @ 1.5 Kg per Sqm including 450mm long 25mm dia medum grade GI pipe shall be provided at the lowest in case of leakage.The joints in CI/GI/PVc pipes, Nahani traps, WC and P/S trap connection shall be made leak proof.The gap around the pipes in walls/beams shall be properly filled and sealed with water proof joints fillers complete all as specified and as directed. |
| 46 | M & L for PCC 1:3:6 type B0, (using 12.5mm graded crushed stone aggregate) as in levelling course including weathering slightly rounded or chamfered angles and throating as directed complete all as specified and as directed. |
| 47 | S&F 25 mm bore CPVC pipes SDR 11 pipes & Plain CPVC SDR 11 fittings and fixed complete to walls and ceiling or laid in floors including taking down existing GI/CPVC complete all as specified and as directed |
| 48 | S&F in repairs of CPVC pipes 20 mm dya SDR 11 & plian CPVC SDR 11 fittings in wall /ceiling or laying in floors taking down existing GI /CPVC pipes complete all as specified and directed. |
| 49 | S & F in repair bib tap 15mm bore, fancy type, chromium plated, cast copper alloywith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. |
| 50 | S&F in repairs 15mm bore wall Mixer Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed ll complete all as specified and as directed. |
| 51 | S & F in repairs 15mm bore stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type).complete all as specified and as directed. |
| 52 | S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and as directed. |
| 53 | S&F 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed. |
| 54 | S & F in repair chromium plated125mm swivel shower complete all as specified and as directed. |
| 55 | S& F in repairs water closet (squatting pan) complete including provision of lime concrete bedding \"Orissa\" pattern size 508 x 440mm white, integral foot rests including flushing cistern and flush pipe, PVC connection of size 450mm complete all as specified and as directed. |
| 56 | S&F in repair EWC Pedestal pattern WC ,any colourinclEWC seat Cover,10 ltr capacity PVC ,LLFC,32 mm dia PVC flush pipe including CP Toilet Paper holder etc complete all as specified and as directed. |
| 57 | Supply & fixing in repair vitreous china wash basin with padestal , white flat size 550x400mm incl bracket cutting for and pining in ends of brackets or erecting stand including PVC connection pipe 15 mm bore 450 mm long , waste coupling of PTMT , PVC waste pipe complete all as specified and directed. |
| 58 | S & F 600x450mm belevelled edge mirror of selected equality glass mounted on 6mm thick AC building boardand fixed to wooden plugs width chromium plated brass screws and cup washers.complete all as specified and as directed. |
| 59 | S & F tubular towel ring brass chromium plated 20mm dia D type 60 cm, between the flangers complete all as specified and as directed. |
| 60 | S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed. |
| 61 | S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including waste coupling and waste pipe and including bedding in cement mortar to dwarf wall or including fixing cantillever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.complete all as specified and as directed. |
| 62 | S & F kitchen plate rack size (24x36x10\")made of stainless steel, complete all as specified and as directed. |
| 63 | Demolition of existing tank of any description and S & F 1000 ltrs rotational moulded polythylene water storage tanks, cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR Part-I including 20mm dia PVC high pressure float valve complete all as specified and as directed. |
| 64 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating and jointing to waste pipe with solvent cement and fixed in PCC 1:2;4, type B1, complete all as specified and as directed. |
| 65 | S & F 110mmaid PVC (SWR) WC connector with lip ring complete all as specified and as directed. |
| 66 | S & F 110mmaid PVC (SWR) WC connector bend type complete all as specified and as directed. |
| 67 | S & F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed. |
| 68 | S & F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed. |
| 69 | S & F 75mm bore PVC (SWR) branch piece with access door, single \"Y\"/\"T\" equal or un-equal complete all as specified and as directed. |
| 70 | S & F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 71 | S & F 75mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed. |
| 72 | S & F 110mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed. |
| 73 | M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.complete all as specified and as directed. |
| 74 | M & L for applying three coats of white wash on wall including preparation of new plastered surfaces complete all as specified and as directed. |
| 75 | M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed. |
| 76 | M & L for applying one coat of white wash on ceiling including preparation of old decorated surfaces complee all as specified and as directed. |
| 77 | M & L for applying two coat of distemper oil emulsion on walls over a coat of primer over 1.0mm thick Birla wall care putty including preparation new plastered wall surfaces complete all as specified and directed. |
| 78 | M & L for complete removalexisting treatment and applying two coat ofdistemper oil emulsion on walls over a coat of primer over 1.0mm thick Birla wall care putty including preparation new wall surfaces complete all as specified and directed. |
| 79 | M & L for two coats of cement base paint over a coat of primer including preparation of newly plastered surfaces of wallcomplete all as specified and directed. |
| 80 | M & L for complete removal of existing treatment and applying two coats of cement base paint over a coat of primer including preparation of old plaster surfaces of walls, complete all as specified and directed. |
| 81 | Material and labour for applying one coat of exterior emulsionpaint (weather proof)on old treated wall surfaces complete all as specified and directed.Make :APEX ULTIMA of Asian Paint or equavalent Note : APEX ULTIMA paintwill be done by roller only, after complete removal of old loose flakes and wall, roof hight portion upto ht 7.50m incl necessary scaffolding to be provided.complete all as specified and as directed. |
| 82 | S & F fancty type power coated 20mm dia curtain rod with fancy type bracket fixed on wall complete all as specified and as directed. |
| 83 | S&F for 18 mm thick , prelaminated medium density fibre (MDF) , interior grade, prelaminated one side with decorative choice lamination and other sidebalancing white with lamination fixed with screw to timber/ steelframe work as inCB shutter, shelves etcwith PVC liping on all exposed edges on same texture and shade. Stainless steel cleat of suitable size will be use to fix the shelves of CB and cabinets.complete all as specified and as directed. |
| 84 | S & F for Auto closing hinges 35mm of0 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete fixed in position complete all as specified and directed. |
| 85 | S & F for D-type cabinet handles premium quality,100 mm longexcruded brass handles complete fixed in position complete all as specified and directed. |
| 86 | M & L for 75mm thick PCC 1:3:6 type C1, (20mm graded aggregate) as in plinth protection laid in panels including finished the surfaces smooth and even without using extra cement complete all as specified and as directed. |
| 87 | M&L for PCC 1:4:8 type B2 (Using 40mm graded stone aggregate) 50mm thick as in sub base floor laid in panels and finished top even and fair without using extra cement complete all as specified and as directed. |
| 88 | M & L for Chequered cement concrete tiles30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry with grey cement and pigments in floors over a15mm thick screed bed in CM 1:4.complete all as specified and as directed. |
| 89 | S&F for 20-25 mm thick Pre polished kota stone as in floors over and including 15mm thickscreed bed or bedding layer in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish and rounding chamfered edges where directed complete all as specified and diirected. |
| 90 | All as per above item No 89 but 20 to 25m thick Pre polished kotastone slabas in small wiidth in vertical surfaces likelandings, risers,, treads, skirtings,dado, etc over and including 10mm thick pcking coat in cement mortar 1:4 complete all as specified and directed. |
| 91 | Rounding to edges of kota stone slabs one edge, such as in steps, cooking platform, and other similar situations.complete all as specified and as directed. |
| 92 | M & Lproviding cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed. |
| 93 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5m in depth for foundation on manholes etc, and area n.exc 10 Sqm on plan and getting out in hard/dense soil.complete all as specified and as directed. |
| 94 | Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar 100mm dia.complete all as specified and as directed. |
| 95 | Description all as per item No. 94 above but 150mm dia pipe complete all as specified and as directed. |
| 96 | M & L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 100mm dia pipe. |
| 97 | Description all as per item No. 96 above but 150mm dia drain pipe complete all as specified and as directed. |
| 98 | M & L for SWG drain pipes grade \"A\" of 100mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed. |
| 99 | Description all as per item No. 98 above but 150mm dia.complete all as specified and as directed. |
| 100 | S & F for PVC (SWR) gully trap of 125/110mm dia set and jointing with solvent cement complete all as specified and directed. |
| 101 | M & L rendering 15mm thick on concrete or brick work in CM 1:4 finished even and smooth without using extra cement complete all as directed and as specified. |
| 102 | Dismanting asbests cement ( corrugated, semi-currugated etc.) sheets in roof covering upto a height of 8Mtrs including necessary scaffolding complete all as specified and as directed. |
| 103 | S&F prepainted galvalume aluminium zink coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPAasin roof covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding complete all as specified and as directed. |
| 104 | S & F prepainted galvalume aluminium zink coating GI based Plain,steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPAasin roof covering/cladding to wall fixed with self tapping screws as specified upto a height of 8Mtrs including necessary scaffolding complete all as specified and as directed. |
| 105 | Dismantling wrought iron or mild steel work of any description not otherwise provided for.complete all as specified and as directed. |
| 106 | S & F roof trusses (framed) trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A upto a height of 8Mtrs including necessary scaffolding complete all as specified and as directed. |
| 107 | M & L for 15 mm thick rendering in Cement Mortar 1:6 on fair faces of Brick works or Concrete surfaces and finishing even and smooth without using extra cementcomplete all as specified and as directed. |
| 108 | M & L for preparing new plastered surfaces of walls and applying 2 coats of OBD on new surface of walls over 1mm thick wall care putty complete all as specified and directed. |
| 109 | M&L for PCC type B1 1:3:6 (20mm graded aggregate) as in copings, surface channel, plinth courses, bed plates, kerbs incl necessary formwork etc complete all as specified and as directed. |
| 110 | M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 111 | Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets.complete all as specified and as directed. |
| 112 | S & F for anodised aluminium snap gridframe work for false ceiling all as specified of grid size 605 X 605mm upto a height of 6Mtrs including M & L Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified upto a height of 8Mtrsincluding necessary scaffolding including complete all as specified and as directed. |
| 113 | S & F for 4mmthick non asbestos fibre cement buildings \"E\" boards fixed or laid/inserted to timber/GI/aluminium frame work in ceiling complete all as specified and directed upto a height of 8Mtrs including necessary scafholding and formwork.complete all as specified and as directed. |
| 114 | M & L for taking down copper/aluminium point wiring (light, fan, socket, power, security lights or bulkhead) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 115 | Taking down existing unserviceable Distribution boards / AC board with MCB\"s any size and any type complete all as specified and as directed |
| 116 | Material and labour for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting of modular switches/sockets etc complete including making good of disturbed surfaces of wall / ceiling / floor complete all as specified and as directed.(a) onelight point/ ceiling /exhaust fan point/bell point |
| 117 | (b) One three pin switch socket 6 Amps outlet on independent board. complete all as specified and as directed. |
| 118 | (c) One three pin switch socket 6 Amps outlet on same board. complete all as specified and as directed. |
| 119 | (d) One light point controlled by two nos of two way switches.complete all as specified and as directed. |
| 120 | All as per item No 116 here in before but with cable 2.5 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and as directed. |
| 121 | All as per item No 116 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for socket out let 15 amps and AC box including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and as directed. |
| 122 | Supply and fix Modular switch 1 way 6A , 1-module complete all as specified and as directed. |
| 123 | Supply and fix Modular switch 1 way 16A with indicator, 1-module complete all as specified and as directed. |
| 124 | Supply and fix Modular bell push 1 way 6A with indicator, 1-module complete all as specified and as directed. |
| 125 | Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and as directed. |
| 126 | Supply and fix Modular socket, shuttered type, 6/16A -combined 2-module complete all as specified and as directed. |
| 127 | Supply and fix Modular switch 2 way 6A,1 module complete all as specified and as directed. |
| 128 | S & F 3 pin, 6 A, 250 V ceiling rose having terminal capacity 3 X 1.5 mm² IP 20 protection complete all as specified and as directed. |
| 129 | M&L of Bells Ding dong AC 230Volts Single pole complete all as specified and as directed. |
| 130 | Supply and fixing ceiling fans complete with blades,copper winding, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery not less than 210 CFM with service value more than equal to (≥)6.00, BEE Five star rated with brushless direct current motor (BLDC) white colour complete all as specified and as directed.Make:Gold Medal cat part no.SCFS 500748/Bajaj Cat part No:ENERGOS 28/ Crompton Cat part No:ENERGION RIVIRA/Havells Cat part No:PRO 28BLDC/Luker Cat part No:ECO28NEOBLDC Regulator 222cmm |
| 131 | Supply and fix forexhaust fan, metal body AC single Phase 230V of size 300 mm sweep,RPM 1200 with, copper winding,blades,rag-bolts, and frame and louvers complete including making suitable size hole in wall for fixing of fan complete all as specified and directed . Make: Havells Cat part No:Ventil air DSB/Gold Medal EFS851012 HAVAC PLUS /Crompton drift air plus300mm/Bajaj-Supreme plus/Luker cat part No:TuuliLME12 |
| 132 | Supply and fix for exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm sweep complete all as specified and directed Make:Havells Cat part No:Vetil Air DX HS/Gold Medal EFS850310 AIR MAXX/Crompton VENTILUS250MM/Bajaj-Maxima neo/Luker cat part No:Viento LX10 |
| 133 | Supply & Fix fro Electric water heater, storage type,vertical, single phase, electric operated, 50Hz, steel body heating element up to 2 KW capacity 25 Ltrs, BEE 5 star ratedinnner tank as per OEM specification with minimum 2 years warranty on over all product (inner tank ,heating element & thermostat)complete with all accessories such as safety valve, thermostate, NRV, connection piece, FRLS multistranded copper conductor cable 3 core PVC insulated, plug top 3 pin 15 Amp , 15 mm dia, brass coupler, flexible pipe suitable to withstand upto 120 °C for hot and cold water, Anchor fastener- 04 Nos of suitable size etc. complete all as specified and as directed Make:Crompton VERSA 25L/ HAVELLS FABIA GHWAFATWB025/ Gold Medal SWMS01025VWH / Bajaj SPECTRUM15096625L/Luker-LPST25 |
| 134 | S & F for 20 W surface / wall mountedLED batten light fitting aluminium extrusion input voltage range 250 V, input frequency 50 Hz, efficacy not less than 120 Lumen/Watt, rated llife 50000 Burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.Make: Crompton CCS-100-20-65-HSL2-DP-NWH/ PHILIPS BN308CLED20S-6500L120PSUWH / WIPRO LL31-251-XXX-65AL5/Havells ENDURALINEARPROBS20WLED865PCSSIND/Bajaj-BCLAB20WCWLEDXT |
| 135 | S & F for 10 W surface / wall mounted 2 feet LED batten light fittinginput voltage range 250 V, input frequency 50Hz, efficacy not less than 100 Lumen/Watt rated life 25000 burning hours including 2 nos PVC Connector blocks electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed Make:Crompton CCS-103-10-65-SL-DP-NWH/ Havells LHEXAZP7PN1W010 / PHILIPS BN021LED12S 6500K PSU GR / WIPROLL20-111-XXX-65NE3 /Bajaj-BCLAB10WLEDCWLED |
| 136 | S & F LED light fitting 10W bulkhead luminaires, efficacy not less than 100 lm/w, rated life 25000 burning hours including LED light driver holder connecting up with three core flexible copper conductor cable IP 65 out door type metal bodyof suitable size complete all as specified and as directed Make: Crompton CIS-306-10-57-SL-DP-NBK/ PHILIPS WT202W LED10S CW PSU S3 PC/ HAVELLS HEXAFT10WLED857SSYMBOPC /WIPRO LW07-141-XXX-57-G1/Bajaj-BIBWP10W LED |
| 137 | Supply and fix in replacement of old unserviceable decorative wall light fixture with new LED light fitting of capacity 15 W indoor capacity and including LED bulb of capacity 15Wrated life 25000 burning hours wiith efficacy 100 lumen / watt with base B-22 complete all as specified and as directedMake:WIPRO-WL-WALLY-B22/Havells-FlorentineWL1LSB22SS-LHFOAJE1TZ1I060/Bajaj-BJLF4 7W TO 15 W |
| 138 | Supply and fixing LED security light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant,efficacy not less than 120 lm/Watts,rated life 50000 burning hours complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with wall mounting bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete suitable for pop/grid false ceiling in complete all as specified and as directed.Make:Crompton TRP-409-45-57-SL-GL-NSG / PHILIPS BRP331LED48CWR5NPCPSUS1V1 / HAVELLS ENDURASUNDOWNSL45WLED765PASYBOPC/WIPRO LR22-501-XXX-57-XX/Bajaj-VISTAP45LWHPOPCSD |
| 139 | S & F for Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed. |
| 140 | S&F for of sheet metal enclosure TPN DBs with 200 Amps rated bus bar of 4 way 415 volts with blank plate complete with double door complete all as specified and directed |
| 141 | S & F for single pole & neutral, double door, metallic distribution board 8 ways conforming to IEC 61439-3, suitable for flush / surface mounting complete all as specified and directed |
| 142 | S&F of MCB single phase and neutral (SPN), 40 Amps, 230 Volts,connecting with lugs, complete all as specified and directed |
| 143 | S&F of MCB SP 6 to 32 Amps \"C\" series complete all specified and directed |
| 144 | S&F of MCB, single pole, 40 Amps, 240 Volts,connecting with copper lugscomplete all as specified and directed |
| 145 | S&F of MCB three phase and neutral (TPN), 100 Amps, 415 Volts,connecting with lugs, complete all as specified and directed |
| 146 | M & L for submain wiring concealed in wall using 3 runs of 6 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including taking down old submain wire and making good of disturbed surfaces of wall / ceiling / floor all complete as specified and directed |
| 147 | Material and Labour for Earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less\" than 1.5meters below normal ground level, earth plate connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES 2009 (part I Specifications) connected to earth test point all as specified or indicated including testing on completion, including necessary excavation and earth work in any type of soil and adequate quantity of common salt & charcoal for alternate layer around the earth plate, including PCC (1:2:4) pit and 10mm thick C.I. cover with arrangement of hinge to 40x40x6mm C.I. angle iron frame, including 20mm dia G.I. pipe for watering purpose with the arrangement of funel and wire mess, including GI pipe of 15 dia for earth lead protection complete incl taking down old onecomplete all as specified and as directed. |
| 148 | M&L for earth continuity conductor 4 Sq.mm dia GI or steel wire complete all asspecified and directed. |
