|
| 1 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 2 | M&L for 15mm thick rendering in CM 1:6 on stone masonry surfaces finished even and smooth without using extra cement complete all as specified. |
| 3 | M&L for two coats of oil bound distemper on newly plastered walls over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and priming plastered and other surfaces with alkali resistant priming paint including preparation of surfaces complete all as specified. |
| 4 | M&L for complete removal of existing treatment on walls, and preparation of old plastered surface of wall and applying two coats of oil bound distemper over a one coat of 1mm thick JK/Birla wall putty over plastered surface to prepare the surface even and smooth and over priming plastered and other surfaces with alkali resistant priming paint complete all as specified. |
| 5 | M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified. |
| 6 | M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified. |
| 7 | M&L for 10 mm thick rendering in CM 1:3 on concrete surface as in ceiling and finishing the surface even and smooth without using extra cement complete all as specified. |
| 8 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying three coats of white wash complete all as specified. |
| 9 | M&L for preparation of old plastered or unplastered surfaces of ceilings and applying two coats of white wash complete all as specified. |
| 10 | Material and labour for 15mm thick rendering in two layer, 5mm thick rendering in CM 1:4 mixed with WPC over 10mm thick rendering in CM 1:4 on stone masonry/concrete surfaces/roof projections/chajjasupto the height 7 Mtr complete all as specified.Note:- WPC shall be measured and paid separately. |
| 11 | Material and labour for 15mm thick rendering in CM 1:4 mixed with WPCon stone masonry/concrete surfaces and Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends etccomplete upto the height 7 Mtr acomplete all as specified.Note:- WPC shall be measured and paid separately. |
| 12 | Material and labour for 15mm thick rendering in CM 1:4 mixed with WPCon stone masonry/concrete surfaces and Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work n exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends etc upto the height 7 Mtr complete all as specified.Note:- WPC shall be measured and paid separately. |
| 13 | Dismantling floor hearth or wall tiling including cement mortar bedding (including not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 14 | M&L for coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles in vertical surface including 10mm thick renderingin CM 1:4 complete all as specified. |
| 15 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing from site complete all as specified. |
| 16 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified. |
| 17 | M&L for 25mm thick PCC 1:2:4, Type B-0 using 12.50mm graded aggregates as in base concrete to floor finish complete all as specified. |
| 18 | M&L for light shade vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurr and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 19 | All as per item No 18 but as inskirting dado incl 10mm thick rendering in CM 1:4 complete all as specified. |
| 20 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 21 | All as per item No 20 above but as inskirting dado incl 10mm thick rendering in CM 1:4 complete all as specified. |
| 22 | M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floorts etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 23 | Taking down chowkats or frames with shutters (w/o taking off shutters) n exc 1.5 sqm each complete all as specified. |
| 24 | Taking down chowkats or frames with shutters (w/o taking off shutters) exc 1.5 Sqm but n exc 4 Sqm each complete all as specified. |
| 25 | S&F factory made steel windows box type using ERW hollow P section including box type hinges with steel handle, tower bolt, peg stay and hold fast complete with glazing bars dovetailed or welded complete without cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified. |
| 26 | S&F factory made steel windows box type using ERW hollow P section including box type hinges with steel handle, tower bolt, peg stay and hold fast complete without glazing bars dovetailed or welded complete without cooler opening all as specified including repairs to jambs in cement mortar with side hung shutters complete all as specified. |
| 27 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified. |
| 28 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars complete all as specified. |
| 29 | S&F sheet glass 4 mm thick, figured glass, pin headed type and glazing with oil putty or wooden beads supplied with shutters in square n.exc 0.5 sqm in each pane complete all as specified. |
| 30 | S&F stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified. |
| 31 | S&F mild steel of grade Fe-290 (Grade E-165) in framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works complete all as specified. |
| 32 | S&F rolled mild steel of grade Fe-290 (Grade E-165) in rolled section as in frames for doors/windows, framing for cladding, glazing and the like fixed with angle cleats and connecting plates, cooler stand etc complete all as specified. |
| 33 | M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification complete all as specified. (Make : Rajshree, ENGCO Industries) |
| 34 | M&L Factory made solid panel of PVC door shutter 30mm thick(style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 35 | S&F 30mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle boad medium density, wood particle board with commercial face venners; supplied and fitted to chowkats complete all as specified. |
| 36 | S&F 35mm thick factory made second class hardwood glazed and skelton shutters, open rebated and prepared to receive glass, guaze, etc (without sash bars), edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified. |
| 37 | M&L 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type one face is covered with deco rative face veneer with lipping/frame to match complete all as specified. |
| 38 | S&F 100mm long mild steel but hinges medium weight, cold rolled complete all as specified. |
| 39 | S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia width including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified. |
| 40 | S&F 150mm long Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified. |
| 41 | S&F 200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified. |
| 42 | S&F Aluminium floor door stopper (overall length of cover plate 140mm) with suitable stops (double) fixed in wooden door to stop complete all as specified. |
| 43 | S&F Aluminum tower boltsof extruded section of size150mm complete all as specified. |
| 44 | S&F 150 mm size Extruded aluminium alloy handles, fabricated type, anodised handles complete all as specified. |
| 45 | Taking up or down steel tubing and connection 15mm bore complete all as specified. |
| 46 | Taking up or down steel tubing and connection 20 mmbore complete all as specified. |
| 47 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 15mm complete all as specified. |
| 48 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 20mm complete all as specified. |
| 49 | S&F 15mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified. |
| 50 | S&F 20mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls celling or laid in floors complete all as specified. |
| 51 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified. |
| 52 | S&F in repair 15mm dia stop valves, screwed down high pressure,screwed both ends for iron pipe or for unions and fixed for 15mm bore but fancy type, chromium plated with long shank and cup (concealed type) complete all as specified. |
| 53 | S&F in repair 15mm dia Stop valves, fancy type, chromium plated screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified. |
| 54 | S&F in repair CP 15mm dia bib tap cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified. |
| 55 | S&F in repair 10 ltr PVC valve less, symphonic action type dual type flushing, low level, white, with inlet ball valve, float and handle including 600mm long PVC connection and brackets complete all as specified. |
| 56 | S&F in repairs vitreous china squatting pan, Órrisa Patern\" size 580mmx440mm white with integral foot rests, embedded and set in PCC 1:5:10 type E2 (using 40mm stone aggregate) and making good to dismantled floor including removing rubbish complete all as specified. |
| 57 | S&F in repairVitreous china wash hand basin (550X400mm) white, flat back excluding taps,including brackets & 32mm waste cuppling complete all as specified. Make : Johnson, Hindware, Parry ware, CERA |
| 58 | S&F for Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe of dia 15mm complete all as specified. |
| 59 | S&F in repair 600x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 60 | S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms) complete all as specified. |
| 61 | S&F in repairs brass chroumium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified. |
| 62 | S&F in repair 20mm dia Harrison rails, chromium plated with fixing brackets, stops, rollers(two nos of brackets/knobs/corners for one length/each opening) etc complete all as specified. |
| 63 | S&F 500 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified. |
| 64 | S&F 1000 Litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm brass ball valve high pressure including dismantling of the old unserviceable water tank with all accessories complete all as specified. |
| 65 | Demoliton of cement concrete of any description & in any position not otherwise specifically provided for and removing debries out of MD land complete all as specified. |
| 66 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified. |
| 67 | M&L for Sand filling under floors or in foundationincluding watering and consolidation complete all as specified. |
| 68 | M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete all as specified. |
| 69 | M&L for pre-cast concrete block as in Kerb Stone (Machine made) with solid blocks Type B1, 1:2:4 (20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:4 complete all as specified. |
| 70 | Dismantling boarding, any description, fixed in any position with screws and complete removal of old connecting snap grid and hangers complete all as specified. |
| 71 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centrecomplete all as specified. |
| 72 | M&L for providing and fixing gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified. |
| 73 | M&L for two coats of oil bound distemper on newly gypsum board on ceiling priming with alkali resistant priming paint including preparation of surfaces complete all as specified. |
| 74 | Hacking out old broken glass (any thickness size quality or description from metal frame including punching or drilling our old glazing/springs clips complete all as specified. |
| 75 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane complete all as specified. |
| 76 | S&F in repair stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads supplied with shutters complete all as specified. |
| 77 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified. |
| 78 | M&L in repair Door closer hydraulically regulated (aluminium extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 79 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty or wooden beads in square exc. 0.5 sqm in each pane complete all as specified. |
| 80 | Taking down wall panelling and similar work complete all as specified. |
| 81 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified. |
| 82 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified. |