|
| 1 | Dismantling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrave, holdfats etc. complete and stacking within 50 metres lead as directed by EIC, including cost of materials, all labour charges, transportation, minor tools, GST, LWC etc complete. The rate inclusive of all consumable items and GST |
| 2 | Dismantling cement concrete CC 1:2:4 & 1:3:6 or richer mix including disposal of dismantled materials. as directed by EIC, including cost of materials, all labour charges, transportation, minor tools, GST, LWC etc complete. The rate inclusive of all consumable items and GST |
| 3 | Providing 50mm thick cement concrete flooring in CC1:2:4( 1 Cement, 2 pulverised stone sand and 4 stone chips 2cm nominal size) finished with a floating coat of neat cement @20.41 Kg/9.29 sqmt as directed by the EIC, including cost of cement, stone chips, crushed stone sand, screening and washing of both the aggregates, mixing concrete, conveying and placing consolidaton, curing, hire charges of mixer machine and vibrator, including cost of all materials, transportation charges of all materials to work site, all labour charges, labour welfare cess cost of minor tools etc. complete. The rate inclusive of all consumable items and GST |
| 4 | Providing and fixing anodised aluminimum work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285, anodised transparent or dyed to required shade according to IS 1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs and screws of with fixing clips or with expansion hold fastners includingnecessary filling up of gaps at junctions, at top, bottom and skles with required PVC / neoprene felt etc.. aluminimum sections shall be smooth rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, aluminumum strap beading for glazing / pannelling, CP brass / stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (Galzing and panneling to be paid for separately). as directed by EIC, including cost of materials, all labour charges, transportation, minor tools, GST, LWC etc complete. The rate inclusive of all consumable items and GST |
| 5 | Providing and fixing glazing in aluminium door, window ventilator , shutters and partitions etc. with PVC neoprene gasket etc. complete as per the architectural drawings and the direction of EIC ( cost of aluminium snap beading shall be paid in basic item). as directed by EIC, including cost of materials, all labour charges, transportation, minor tools, GST, LWC etc complete. The rate inclusive of all consumable items and GSTWith glass panes of 4.0mm thickness (weight not less than 10.00Kg/Sqm) |
| 6 | Providing and fixing Aluminium Handle 100 mm ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete as directed by EIC, including cost of materials, all labour charges, transportation, minor tools, GST, LWC etc complete. The rate inclusive of all consumable items and GST100 mm |
| 7 | Providing and fixing Aluminium tower bolt ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete as directed by EIC, including cost of materials, all labour charges, transportation of charges of materials to work site, minor tools and plants, GST, LWC etc complete. The rate inclusive of all consumable items and GST200 x 10 mm |
| 8 | Providing and fixing Sliding Door Bolt Aluminium ISI marked anodised (AC10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete. as directed by EIC, including cost of materials, all labour charges, transportation of charges of materials to work site, minor tools and plants, GST, LWC etc complete. The rate inclusive of all consumable items and GST250 x 16 mm |
| 9 | Wall painting one or more coat on old work with plastic emulsion paint of approved brand and manufacture to give an even shade, including cost of paint, scaffolding arragements, including cost of materials, all labour charges, transportation charges of materials to work site, minor tools and plants, GST, LWC etc complete. The rate inclusive of all consumable items and GST |
| 10 | Steel work in built up G.I. tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers, including cost of GI pipe, all labour charges, transportation charges of materials to work site, minor tools and plants, GST, LWC etc complete. The rate inclusive of all consumable items and GST |
| 11 | Steel work in built up sections/ framed work including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer,using structural steel etc. as required in gratings, frames, gaurd bar, ladders, railings, brackets, gates & similar works, welded and bolted including special shaped washers etc. complete. Including cost ofall materials, all labour charges, transportation charges of materials to work site, minor tools and plants etc complete. The rate is inclusive of all consumable items and GST, LWC complete. |
| 12 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoide scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/Self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and truss and including cutting to size and shape wherever required. The rate is inclusive of all consumable items and GST. |
| 13 | Providing and fixing precoated galvanized steel sheet roofing accessories 0.50mm (+0.05) total coated thickness, zinc coating 120 grams per sqm as per IS:277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheetand polyester top coat 15-18 micron using self drilling/self tapping screws complete. the rate is inclucive of all consumable items and GST. Ridges plain (500-600mm) |
| 14 | Providing and fixing of MS flat 40x6 sqmm for wind ties over roof as directed by EIC, including cost of MS flat 40x6 sqmm, including cost of materials, all labour charges, transportation of charges of materials to work site, minor tools and plants, GST, LWC etc complete. The rate inclusive of all consumable items and GST |
| 15 | Providing and fixing on wall face unplasticized Rigid PVC rain water pipes cofirming to IS:13592 Type A including jointing with seal ring confirming to IS:5382 leaving 10mm gap for thermal expansion, (i) Single socketed pipes. (110mm dia ). including cost of materials, all labour charges, transportation of charges of materials to work site, minor tools and plants, GST, LWC etc complete. The rate inclusive of all consumable items and GST |
| 16 | Providing and fixing 15cm wide, 45cm over all semi circular plain GS sheet gutter with iron brackets 40x3mm size bolts, nuts and washers etc., including making necessary connection with rain water pipes etc., complete. 0.80mm thick with zinc coating not less than 275gm/sqm as directed by Engineer-in-charge, including cost of aluminium sheet, MS flat, transportation charges of all materilas to work site, cost of aluminium sheet, cost of all labour charges and minor tools, cost of all materials, scaffolding, transportation labour welfare cost, GST etc. complete. The rate inclusive of all consumable items and GST |
| 17 | Two coats on old work painting with synthetic enamel colour paint good quality of approved brand by EIC (Asian/Nerolac/Berger) or equivalent over steel surface, preparation of surface including cleaning, scrapping of the existing painted surface, cost of paint, brush, scaffolding arrangements, transportation charges of all materials to worksite all labour charges, minor tool & plants, GST, LWC etc, complete. The rate inclusive of all consumable items and GST |
| 18 | Providing and laying 12mm thick Cement plaster with 1:4(1 cement and 4Mainland River sand) including cost of cement, Mainland river sand, transportation charges of all materials to work site all labour charges, minor tools etc complete.The rate is inclusive of all consumable items andGST. The rate inclusive of all consumable items and GST |
| 19 | Removing and disposing of night soil in inspection chamber by manually including removing and refixing of cover slab, cleaning and blockages in sewage pipes and removing of night soil and soaked earth from surrounding area of the inspection chamber and disposing the removed materials at a distance of 500mtrs from the inspection chamber including cost of kerosene, phynoil, soap all labour charges, minor tools and plants, LWC, GST,etc, complete. The rate inclusive of all consumable items and GST |
