|
| 1 | Task Name:- DTR |
| 2 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg |
| 3 | D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel |
| 4 | 11 KV(45KN) Composite Polymer Disc Insulators |
| 5 | 11 KV Strain hardware (T&C type) fittings |
| 6 | 11 KV D.O. Fuse Unit Polymer type |
| 7 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 8 | Transformer mounting Channel (100X50x6 mm.) |
| 9 | Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) |
| 10 | Stone Block/Pre cast block for base pedding(450X450X75MM) |
| 11 | Concreting of structures & foundation (1:3:6). |
| 12 | Complete jumpering of DTR |
| 13 | Danger Boards Enamelled 11 KV |
| 14 | Bi-metallic clamps Distribution Transformers Bushing |
| 15 | Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC |
| 16 | Red oxide paint |
| 17 | Aluminium paint |
| 18 | M.S.Nuts with Bolts |
| 19 | D.O.Mounting Channel 75x40x6mm |
| 20 | Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) |
| 21 | LT distribution box with 1.2 mm thick MS powder coated sheet, 315 A MCB on incoming & 6 no. 250 A HRC fuse base including 200 A HRC fuse , For 200 KVA Transformer |
| 22 | Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box |
| 23 | G.I. STRIP 25X3 MM1 |
| 24 | G.I.Pipe 40 mm Dia C grade type |
| 25 | Bentonite compound powder |
| 26 | Galvanized nut & bolt with washer |
| 27 | M S Channel 100X50x6 mm |
| 28 | AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) |
| 29 | 11/0.4 KV Distribution transformer 200 KVA (Conventional) (Rep-BGP) |
| 30 | M.S.Angle 50x50x6 mm |
| 31 | 11 KV Composite Polymer AB Switch Horizontal Movement type |
| 32 | 11 KV Pin Insulator Polymer Composit (5 KN) |
| 33 | Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) |
| 34 | XLPE Cable 1 core unarmoured 300 sqmm Aluminium conductor 1100 Volts |
| 35 | M S Channel 75X40x6 mm |
| 36 | XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts |
| 37 | Other Cost |
| 38 | TOTAL COST WITHOUT GST |
| 39 | GST Please Enable Macros to View BoQ information |
