|
| 1 | Taking down cementor cement lime plaster, any description, on brick walls including racking out joints hacking for keyscrubbing down with water etc complete all as specified and directed. |
| 2 | M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:6 finishing even and smooth with out using extra cement complete all as specified and directed. |
| 3 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finishing even and smooth with out using extra cement complete all as specified and as directed. |
| 4 | M&L for rendering 5mm thick on fair faces ofconcrete surfaces in cement mortar 1:3in ceiling surface finished even and smooth with out using extra cement complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered surfaces of walls and applying two coats of colour wash complete all as spd and as directed. |
| 6 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed. |
| 8 | M&L preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down and applying one coat of white wash complete all as specified and as directed. |
| 9 | M&L preparing old surfaces of ceilings, plastered or uplastered including brooming down or wire brushing, scrapping down and applying one coat of white wash complete all as specified and as directed. |
| 10 | M&L preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down and applying one of OBD complete all as spd and as directed. |
| 11 | M&L preparing old surfaces of walls plastered or uplastered including brooming down or wire brushing, scrapping down and applying one of colour wash complete all as spd and as directed. |
| 12 | M&L preparing old steel surfaces of any description, over 10cm in width or girth, applying one coat of synthetic enamel paint to match existing surfaces complete all as spd and as directed. |
| 13 | M&L preparing old wooden surfaces of any description, over 10cm in width or girth, applying one coat of synthetic enamel paint to match existing surfaces complete all as spd and as directed. |
| 14 | S & F in repairs of Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mmand fixed with stainless steel wire staples or wooden/aluminium beeds all as specified and directed. |
| 15 | S&F of curtain rods (drapery rods) not less than 25 mm dia, anodised aluminium alloy with fixing brackets fixed in repairs all as specified and directed. |
| 16 | S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including to connection to drain complete all as specified. Make: Cera |
| 17 | Dismantling floor, hearth or wall tiling including cement morar bedding, removing serviceable tiles to store and rubbish off the permises complete all as spd and as directed by Engr-in-Charge. |
| 18 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (suqare/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry laid over and including 15mm thick screed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as spd and as directed by Engr-in-Charge. |
| 19 | M&L for joint free matt finished rectified ceramic coloured tiles 7 to 8mm thick (suqare/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry laid over and including 15mm thick screed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as spd and as directed by Engr-in-Charge. |
| 20 | M&L for Glazed ceramic coloured tiles 450x350 size 7 mm thick in vertical surfaces as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles,laid over and including 10mm thick screed in cement mortar in cement mortar 1:4all as specified and directed. |
| 21 | Supplying and applying two component elastometic acrylic polymer modified cementious waterproofing coating, SmartCare Damp Block 2K Supremo of approved equivalent,having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI, applying SmartCare Damp Block 2K Supremo in two coat 2 kg/sqm consumption, the mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc complete as per manufacturers specifications. |
| 22 | S&F in repairs 150mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed fixed as in repair. |
| 23 | S&F in repairs 100mm size aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed fixed as in repair. |
| 24 | S&F in repairs 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed fixed as in repair. |
| 25 | S&F in repairs 150mm size aluminium alloy handles of extruded section,fabricated type complete all as specified and as directed fixed as in repair. |
| 26 | S&F for floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn sreel spring fixed in floor of overall length of cover plate 150mm fixed in repairs complete all as specified and as directed. |
| 27 | Dismantling of old water tank exc 250 Ltr & n.exc 500 Ltr capacity and removing from store etc complete all as specified and as directed. |
| 28 | S&F rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm dia Ball brass valve high pressure with polythene float and flu nut screwed for iron pipe or brass and fixed etc complete all as specified and as directed. |
| 29 | S&F in repairs bib taps, CP fancy typewith crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore dia and fixed complete all as specified and directed. |
| 30 | S&F as in repair fancy type 15 mm bore pillar taps Cast copper alloy, with capstan heads chromium plated, screwed dodn high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixedall as specified and directed by Engr-in-Charge. |
| 31 | S&F of 10 lit capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polythene of low/high density PVC 32mm dia for low level cistern complete, fixed in repairs, all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repairs Vitreous China wash basin, white, flat back, of size 550x400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, 32 mm dia chromium plated waste fitting and 32 mm bore PVC waste pipe all as specified and directed by Engineer-in-Charge. |
| 33 | S&F in repairs 15 mm dia stop valve/angle valvecast copper alloy screwed down high pressure, with crutch or butter fly handles, screwed both ends for iron pipe with CP fancy type complete all as specified and as directed. |
| 34 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, fixed in repairs all as specified and directed. |
| 35 | S&F of PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and directed. |
| 36 | S&F of Towel rail 600 mm long of PTMT minimum weight 190 gms, fixed with and including chromium plated brass screws and wooden / plastic cleats. |
| 37 | M&L for application of damp proof course on brick/concrete surfaces of wall before application of plaster includingnecessary scaffolding upto a height of 10metre complete all as specified and directed by Engr-in-Charge. |
| 38 | Demolition of plain cement concrete (un-reinforced) of any description and in any position not other wise specifically provided for, including removal of demolished material out side MD land complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed. |
| 40 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and directed. |
| 41 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes |
| 42 | M&L for 100mm thick plain cement concrete 1:2:4 mix type B-2 (using 40mm graded stone aggregates) as in floors, hard standings, pavings etc surface finished evev and fair with out using extra cement complete all as specified and as directed |
| 43 | M&L for cement concrete 1:2:4 tybe B-1 using 20 mm graded stone aggregateas in bencing of chequered tiles,interlocking tilesincluding slightlly rounded do chamfered angles and throating all as specified and directed by Engr-in-Charge. |
| 44 | Cleaning of Manhole of any size & depth and remove the all sediment material outside of MOD land by Contractor\"s own arrangement and placing back of covers complete all as spd and as directed. |
| 45 | Cleaning of Sewage lines of dia 100/150 mm by rodding manually or mechanically means and taking out sludge, rigid soil and removing outside MOD land by Contractor\"s own arrangement complete all as spd and as directed. |
| 46 | S&F in of 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors as in soil, waste and pipes including dismantling of old pipes all as specified. |
| 47 | M&L forFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors,gates ; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as spd and as directed. |
| 48 | M&L for preparing new or previously untreated surfaces of steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 49 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings |
| 50 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc., fixed with L- type, J -type or cranked hook bolts all as specified |
| 51 | M&L for 6 mm thick Asbestos cement, serrated ridge forcorrugated or semi corrugated sheets fixed with L- type, J -type or cranked hook bolts all as specified all as specified |
| 52 | Demolition of Brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed. |
| 53 | M&L for Brickwork with sub-class `B\" old sizebricks, straight or curved on plan exceeding 6m meand radius in half brick thick walls built in cement mortar 1:6 all as specified and directed. |
| 54 | M&LHardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 55 | M&L Plain cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregates as in coping including necessary formwork, weathering, slightly rounded or chamfered angles, finishing of exposed surfaces of concrete to even and smooth without using extra cement complete all as spd and as directed. |
| 56 | M&L 100 mm thick cement concrete type D-2 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and as directed. |
| 57 | M&L 100 mm thick cement concrete type B-2 1:2:4 (40mm graded stone aggregate) as in floor Finishing cement concrete surface even and smooth with out using extra cement complete all as specified and as directed. |
| 58 | M&L for rendering 10mm thick on fair faces of brick or concrete in CM 1:4 finishing even and smooth with out using extra cement all as specified and directed. |
| 59 | M&L for Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 250 n exc 500 litres and from mouths of circulating pipes, etc. |
| 60 | M&L for Cleaning and removing all scale and dirt, etc, from tanks of capacity exc 500 n exc 1000 litres and from mouths of circulating pipes, etc. |
| 61 | S&F in replacement Modular socket, 6A, 5 pin combination 2 module complete all as specified and as directed. |
| 62 | S&F in replacement Modular switch socket combination , 16A, 6 pin 3 module complete all as specified and as directed. |
| 63 | S&F in replacement modular switch one way 6 Amps, 1 module complete all as specified and as directed. |
| 64 | S&F in replacement of modular Fan regulator electronic step type, 120W- 2 module, 240V single phase complete all as specified and as directed. |
| 65 | S&F MCB Single Pole 6-32 Amps, 240V, C Curve, 10 kA, Complete all as specified and as directed. |
| 66 | S&F Isolator 4 Pole 63 Amp, 415V Complete all as specified and as directed. |
| 67 | S&F in replacement 4 Feet LED Tube light of 20Watt integrated Batten LED polycarbonate Tube light with inbuilt driver <10% THD with very high efficiency and connected upto ceiling rose including taking down exisitng Tube light fitting of any type complete all as specified and as directed. |
| 68 | Taking down ceiling fan, cleaning internally & external and removing defective winding and rewinding with new super enamelled copper wire of existing gauge and weight as per manufactures design and instructions including insulating materials and varnishing of ceiling fans of of size 1200/ 1400mm sweap of any make and re-assembling testing complete and refixing to the location including replacement of flexible copper wire from ceiling rose to ceiling fan all as directed and specified. |
| 69 | Supply only condenser (capacitor) 3.15/ 2.5 MFD, 440 Volts, AC, 50 Hz as per IS : 1709 suitable for ceiling fan 1200/ 1400mm sweep complete all as specified and as directed.Make:- ASIAN/ CROMPTON/ Bajaj as approved by AGE |
| 70 | M&L for cleaning of complete indoor/outdoor units of 1.5 TR Capacity Split Air conditioner by means of adding, cleaning solution (HCL) or equivalent solution with water all asdirected by Engineer in Charge.Note:- The cleaning of the condenser and chillier units shall be done using nylon brushers till the scaling is removed completetly |
| 71 | M&L for Top up / Gas charging with refrigerant gas (R-22/32/410) for Air conditioner window type / split type of capacity 1.5 / 2Ton after vacuuming &leak testing including bracing suction/discharge line and testing complete all as specified and as directed. |
| 72 | Starting Capacitor 35 to 45 MFD Make:- Topcon / Ducati / Kenton / Concap) |
| 73 | Universal PCB Timer electronic switch with sensor suitable for all makes of split 1.5 / 2 Ton AC complete with hand setincluding taking down unserviceable Electronic PCB from existing unit all as directed. Make:- Baba/ Wavess or its equivalent as approved by AGE(I) |
| 74 | S & F Locking Device including locking rods for Almirah large steel including removing of unserviceable locking device complete all as specified and directed. |
| 75 | S & F steel Handle 150mm long, for Almirah large steelincluding removing ofunserviceable Handle complete all as specified and directed. |
| 76 | S & F lock of size 65mm X 55mm universal type 6 lever made out of mild steel, powder coated for Almirah large steel/Almirah medium steelincluding removing of U/s lock complete all as specified and directed. |
| 77 | All as Item No 77 above but Almirah medium steel |
| 78 | S & F handle 100mm longof mild steel chromium plated for locker bed side steel including removing of U/s handle complete all as specified and directed. |
| 79 | S & F hasp and staple 75mm long mild steel chromium plated for locker bed side steel including removing of U/s hasp and staple complete all as specified and directed. |
| 80 | S & F of shelves of rack shoe steel with all necessary workman ship like cutting bending making holes and welding including removing of unserviceable shelves and apply two coat of synthetic enamel paint black with spray compressor complete all as specified and directed. |
| 81 | S&F GI Charpoy Long Rail of GI Pipe 32mm Bore (dia) Medium Grade duly Threaded Both Ends upto the required Length and fitted to frame of Charpoy including taking out U/s long rail from 3-way elbow by unscrewing, complete all as specified and directed. |
| 82 | S&F GI Charpoy Short Rail of GI Pipe 32mm Bore (dia) Medium Grade duly Threaded Both Ends upto the required Length and fitted to frame of Charpoy including taking out U/s short rail from 3-way elbow by unscrewing, complete all as specified and directed. |
| 83 | S&F GIELBOW 3-WAY, ISI Marked suitable for GI Pipe 32mm Bore (dia) of GI CHARPOY including Taking out U/s GI ELBOW from the Frame, complete all as specified and directed. |
| 84 | S&FMS Flat 20mmX3mm thick to charpoy GI Pipe 900 mm long with nut and washer, including Taking out U/s flat from the Frame, complete all as specified and directed. |
| 85 | S&F in repair ply wood top of size 2000 mm x 900 mm x 12 mm for charpoy GI Pipe with screws, Nut and Washer including taking out the U/s items complete all as specified as directed. |
| 86 | M & L preparing external and internal surface of following steel furniture\"s including de-rusting/scratching, paste applying putty, sanding, etc. and applying spray painting with two coats of synthetic enamel paint using spray guns, over a coat of red oxide primer , (existing colour/required colour)complete all as specified and directed. |
| 87 | Almirah Large steel |
| 88 | Almirah Medium steel |
| 89 | Chair CB steel with Arms |
| 90 | Removing of U/s top of TABLE DINING 6 PERSONS and S&Ftable top ISI marked, 18/ 19mm thick, prelaminated particle board, one side with decorative choice and other side balancing white lamination with 4mm thick teak wood edging all around duly french polished complete all specified and directed. |
| 91 | M&L for replacement of damaged each leg of TABLE DINING 6 PERSONS with 1st class hard wood legs duly french polished complete all specified and directed. |
| 92 | M&L for replacement of U/s Table bed side shelf with 12 mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination with 4mm thick teak wood beading complete all specified and directed. |
| 93 | Removing of U/s mirror (size 3\" x 1.5\")for dressing table ladies with and S&F new mirror of same size and shape as per drawing complete all as specified and directed. |
| 94 | Removing U/s knob for dressing table ladies with mirror and S&Fnew chromium plated knob 40mm dia/size complete all specified and directed. |
| 95 | Removing U/s leg for dressing table ladies with mirror and S&Fnew leg made of 1st class HW, duly french polished complete all specified and directed. |
| 96 | Removing of U/s top (size 1.5\" x 1\") of Peg Table and S&Ftable top ISI marked, 18/ 19mm thick, prelaminated particle board, one side with decorative choice and other side balancing white lamination with 4mm thick teak wood edging all around duly french polished complete all specified and directed. |
| 97 | Removing of U/s top of Teapoy and S&Ftable top ISI marked, 18/ 19mm thick, prelaminated particle board, one side with decorative choice and other side balancing white lamination with 4mm thick teak wood edging all around duly french polished complete all as specified and directed. |
| 98 | Removing of U/s plywood topof size 8\"x\"3\"x 12mm for BED Hard and S&Fnew 12mm thick commercial plywood BWR grade, ISI marked complete as per drawing complete all as specified and directed. |
| 99 | M&L for replacement of damaged short rail for BED Hard with new short rail made of 1st class HW, duly french polished complete all specified and directed. |
| 100 | M&L for replacement of damaged head board for BED Hard with new head board made of 4 mm thick plywood BWR grade, one side teak facing complete all specified and directed. |
| 101 | M&L for replacement of damaged foot board for BED Hard with new foot board made of 4 mm thick plywood, BWR grade, one side teak facing complete all specified and directed. |
| 102 | M&L for replacement of damaged leg for BED Hard with new leg made of 1st class HW, duly french polished complete all as specified and directed. |
| 103 | Removing U/s foam cushion and S&F21\" x 22\" x 100 mm thick new foam cushion of 40 Kg/Cum density complete all as specified and as directed. |
| 104 | Removing U/s tapestry cloth and S&Fbest quality duly stitched new tapestry cloth chain in one side for foam cushion complete all as specified and directed as per drg and as approved by GE complete all as specified and directed. |
| 105 | Removing of U/s top (size 2\" 6\"\" x 2\") of TV Trolley and S&Fnew 18/ 19mm thick, ISI marked, prelaminated particle board, one side with decorative choice and other side balancing white lamination with 4mm thick teak wood edging all around duly french polished complete all as specified and directed. |
| 106 | Removing of U/s leg of Chair Dining and S&Fnew front leg made of 1st class HW, duly french polished complete all as specified and directed. |
| 107 | Removing of U/s front/Side/Back rail of Chair Dining and S&Fnew front rail made of 1st class hardwood, duly french polished complete all as specified and directed. |
| 108 | Removing of U/s front/Upper Back stiffener of Chair Dining and S&Fnew front/upper back stiffener made of 1st class hardwood, duly french polished complete all as specified and directed. |
| 109 | Removing of old unserviceable plastic cane from seat and back of chair Verandah and rescanning ofseat and back with 4mm wide half round plastic cane of best quality Godrej pattern, complete all as specified and directed. |
| 110 | Removing of U/s plastic cane from Chair Dining and recanting the same with new half round white colour 2mm cane, 4mm cane for border in godrej pattern. The caning work shall consist of four strand in each holes all as per drawing and complete all as specified and directed. |
| 111 | Allas per serial item no.110 above but for Chair Easy |
