|
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft / loose soil, complete all as specified and directed. |
| 2 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete all as specified and directed. |
| 3 | M&L forPlain Cement concrete in foundations, filling and mass-concrete type B2 type 1:2:4 (using 40 mm aggregate), complete all as specified and directed. |
| 4 | M&L for hard core of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface using broken bricks/boulders, complete all as specified and directed. |
| 5 | M&L for PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as in flooring etc., complete all as specified and directed. |
| 6 | M&L for 40mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in flooring etc, complete all as specified and directed. |
| 7 | M&L for 75 mm thick PCC 1:3:6 type C2 using( 40mm graded stone aggregate) as in plinth protection/foot path finishing cement concrete even and fair with out using extra cement, complete all as specified and as directed. |
| 8 | S&F for steel work in tublar trasses including special shaped washers etc complete using ERW or induction but welded tubes conforming to IS 1161-1979 grade SI-240, complete all as specified and directed. |
| 9 | M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates.(Fe 410-W(Gde E-250) Quailty -A, complete all as specified and directed. |
| 10 | M&L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under \"Structural Steel\"), complete all as specified and directed. |
| 11 | S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 12 | S&F for pre-painted galvalume aluminium zinc coating , GI based plain steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 MPa as in roof covering/ cladding on wall, fixed with low carbon self-tapping screws, complete all as specified and as directed. |
| 13 | M&L for two coats of synthetic enamel paint(over red oxide primer) on new painted steel surfaces of any description over 10cm in width or girth, complete all as specified and directed. |
| 14 | M&L for finished surface of concrete roads , pavements by brooming or belting, complete all as specified and directed. |
| 15 | M&L for forming construction joints 10mm wide and 30 mm deep and filling with joints sealing compound grade \"A\", complete all as specified and directed. |
| 16 | Demolition of cement concrete(Un reinforced)in ground floor & pavings n.exc 15 cm thickness (below or above GL) and removing debries out side MOD land, complete all as specified and directed. |
| 17 | S&F of Rolled mild steel in stairs (Fe 410-W Gde E-250, quality ‘A’ (Framed) including stringers, treads, landings, balusters, hand rail cleats, brackets etc. ladder, gate, window, grill, with cutting to dead length where require, notching, drilling, fitting, riveting and /or welding or connecting with bolts and nuts (incl rivets or bolts and nuts) fitting of angle cleats, fish plates, gusset plates etc., connecting plates complete all as specified. |
| 18 | S&F for chequered mild steel plate as in staircase landing and tread including welding etc., complete all as specified and directed. |
| 19 | M&L for preparation of new painted steel and iron surfaces of any description over 10cm width or girth applying two coats of synthetic enamel paint over a coat of red ozide primer, complete all as specified and as directed. |
| 20 | Removal of excavated material soft/loose soil exc. 250m & n. exc. 500m distance and depositing, complete all as specified and as directed. |
