|
| 1 | Excavating in post holes( or similar holes ) each n. exc 0.5 cumin any type of soil getting out, returning filling in and ramming around in layers not exceeding 25 cmcomplete all as specified and as directed. |
| 2 | Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm each incl iron mongry complete all as specified and as directed. |
| 3 | Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm eachincl iron mongry complete all as specified and as directed. |
| 4 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description complete all as specified and as directed |
| 5 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed. |
| 6 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 7 | M&L PCC 1:2:4 using B1 (20mm graded aggregate) for coping, corner of roof and similar work complete all as sepcified and directed. |
| 8 | Dismantling of cast iron or reinforced concretedrain pipe/PVC pipe 100/110 mm dia and below jointed in cement mortar and taking out offloor/walls etc complete all as specified. |
| 9 | Demolition of cement concreteany description and any position not otherwise specifically provided complete all as specified and as directed. |
| 10 | M&L for70 mm thick PCC 1:3:6 type D2 using 40mm graded aggregate as in sub base of floor etc complete all as specified and as directed. |
| 11 | M & L for PCC 1:2:4 Type B2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 12 | M&L for 75 mm thick PCC type CI 1:3:6 using 20mm graded crushed stone aggregate as in plinth protectionlaid in alternate pannels finished even and smooth without using extra cement complete all as specified and as directed. |
| 13 | M&L for 50mm thick PCC 1:4:8, type D-2by using 40 mm graded stone aggregate as in sub base floor complete all as specified and as directed. |
| 14 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 25mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed. |
| 15 | M&L brick work with subclass B bricks, straight or curved on plan exc 6m mean redius built in CM 1:6 complete all as specified and as directed |
| 16 | Rendering 15mm thick in CM 1:4 on fair faces of brick/concrete finished fair and even without using extra cement complete all as specified and as directed |
| 17 | Rendering 10mm thick in CM 1:6 on fair faces of brick/concrete finished fair and even without using extra cement complete all as specified and as directed |
| 18 | M & L for Vitrifiedtiles light Shade 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 19 | M&L for vitrified tiles of 600mmx1200mm (Double charge glossy finish), area of each tile exc 0.42sqm but not exc 1.00 Sqm, 8-10mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 20 | Ditto as per item No here in before but in vertical surfaces such as skirting/dado and including 10mm thick rendering as back coating etc complete all as specified and as directed. |
| 21 | M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 22 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 23 | S&F Vitrified Dura stone pathway/exterior tiles of size not exc 0.36 Sqm of 8-15mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed |
| 24 | M&L for 10-12 mm thick gypsum boards seemess false ceiling including sunk or raised moulding or cop design as approved, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed by Engr-in-Charge.Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer |
| 25 | S & F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws all as specified and as directed. |
| 26 | S & F Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding, eves board and similar work to wall fixed with self tapping screwsall as specified and as directed. |
| 27 | Aluminium Composite Panel (ACP) wall cladding/facade( cut to arch shape or as directed)or in ceilingwith sunk or raised moulding/cop design as approved by GE of 6 mm thick HPL sheet, aluminium cover sheet thickness 0.5 mm, panel length 2240 mm and width 1220 mm, interior face coil coated with polyester,fixing with aluminium tube/ aluminium channel with aluminium /steel rivet/screw in any position and height in any colour including preparation ofsurface for ACP complete all as specified and as directed. |
| 28 | M&L for rolled section as in main and cross beams , purlins , rafters ,posts where connected to common rafter and running rails,frame work of eves board, tank staging work etc conforming to Fe- 410-W complete all as specified and as directed. |
| 29 | S&F rolled mild steel Fe-410w (Gde-E-250) quality \"B\" Roof trusses (framed ) , trussed, purlins, crane gantries , rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and as directed. |
| 30 | M&L hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembeddinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc complete all as specified and as directed. |
| 31 | M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab, moulding, rubbing, polishing complete all as specified and as directed. |
| 32 | Providing and fixing factory made uPVC white/coloured casement (Openable) Door made of extruded profile with wall thickness of 2.3mm ( + -0.2mm). Door/Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be metered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleek with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 33 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 34 | Providing and fixing factory made uPVC white colour fixed window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing withselected quality glass(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 35 | M & L forsheet glass 5.5mm thick of one side view, ordinary quality and glazing with beads fixed with metal panel pins, EPDM washers or connected accessories complete all as specified and as directed |
| 36 | S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 37 | S&F 12mm toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, 18\" SS handle, locking system etc asrequired complete all as specified and as directed. |
| 38 | S&F solid PVC wall lining consisting of 5mm thick woodgrain colour PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed. |
| 39 | Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc incl removal of old treatment of any description and 15mm thick screed bed in cement mortar 1:4 and applying one coat of neat cement slurry @ 3.00 kg/Sqm and applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaceswith min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm blinded with fine sand in dry condition @ 0.5 kg/sqm including two coats ofbituminious aluminium paint all as specified and directed. |
| 40 | Venetian blinds horizontal or vertical or type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, rolling arrangement/roller, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed. |
| 41 | M&L 1mm thick wall care putty on wall complete all as specified and as directed |
| 42 | M&L for two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified and as directed. |
| 43 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed. |
| 44 | S&F 4 mm dia galvanised steel wire 50 mm x 50 mm mesh made up in to matresses or cages etcall as specified and as directed. |
| 45 | M&L for preparation of newly steeland iron surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 46 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 47 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 48 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type wire meshdoor shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 49 | S&F door closer of aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed. |
| 50 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube suppling and fixing in opening as per specification & drawing complete all as specified and as directed. |
| 51 | S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 52 | S&F stainless steel cold rolled butt hinges mediumweight 100 mm long complete all as specified and as directed. |
| 53 | S&F 200 mm longstainless steel barrel tower bolt of extruded section complete all as specified and as directed. |
| 54 | S&F 150 mm lengthstainless steelhandles fabricated type anodised complete all as specified and as directed. |
| 55 | S & F 300 mm long stainless steel sliding door bolt with hasp staple (bolt type ) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed. |
| 56 | S&F stainless steelwire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified and as directed. |
| 57 | S&F Vitrified Dura stone pathway tiles of size not exc 0.36 Sqm of 8-10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:6 including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all as specified and directed |
| 58 | M&L for cupboard/almirah in required size at site made out 18 mm thick one side decorative lamination sheet/sunmica consisting of carcass 18/20 mm thick PVC sheet & provn of shutters made out of 18mm thick one side decoartive laminated PVC sheet all reqrired brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edbes shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish, necessary drawer, openable shelve with frame work complete as per make and specification mention as per drawingwith locking arragement approved by Engr-in-Charge (Make: Rajshree/Sintex/Action Tessa or equivalent) Complete all as directed. |
| 59 | S&FPVC steel catcherof superior quality all as specified and directed by Engr in charge/GE. |
| 60 | S & F Hetich softcloser hinges of stainless steel premium quality complete all as specified and as directed. |
| 61 | S&F fancy type Brass handles 100mm size fixed with screws, complete all as specified and as directed. |
| 62 | S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish orelectro galvanised complete all as specified and as directed. |
| 63 | S&F 20mm dia stainless steel powder coatedfancy type tubular curtain rail with brackets and end bulb as per reqirement all as directed. |
| 64 | S&F of rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all as specified and as directed. |
| 65 | S&F in repairs Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe complete all as specified and as directed. |
| 66 | M&L for 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed. |
| 67 | M&L for 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed. |
| 68 | S&F in repairs PVC connection 15 mm size with PTMT nuts600mm long, fixed in repairs, complete all as specified and as directed. |
| 69 | S&F in repair countertop vitreous chinawarewash hand basin (WHB) whitesize 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete. Make : Jaquar Make :KUS-WHT-35601 or its equivalent in Hindware/Cera/Parryware |
| 70 | S&F in repairs 5 mm thick looking mirrorof required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glasscomplete all as specified and as directed. |
| 71 | S&F in repair Water closet single piece/wall hanged pattern coloured of size 535 x 380 x 400 mm in repair as approved and complete all as specified and directed. Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera/Parryware |
| 72 | S & F in repairs15 mm dia WHB mixer /wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specifie and as directed.Make - Jaquar Cat No KUP-35011BPMor equivalent in Hindware and Parryware |
| 73 | S&F 15 mm bore Bib tap in repair complete all as specified and directed. Make : Jaquar Cat Part No CON 107KN and equvalent in CERA/Parryware. |
| 74 | S&F in repairs 15 mm diaAngle valves/ stop cock ,fancy type and chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all as specified and as directed. Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/ Parryware |
| 75 | M&L in repair for vitreous china urinal half stall type white incl waste pipeand connected accesories complete all as specified and directed. Make - Jaquar Cat No URS-WHT-13253O or equivalent in Hindware/Cera/Parryware |
| 76 | S&F in repair concussive push button taps of cast copper alloy, screwed for iron pipe and fixedcomplete all as specified and as directed.Make - Jaquar Cat No PRS-077 or equivalent in Hindware/Cera/Parryware |
| 77 | S & Fin repair Vitreous china squatting pan \"Orissa\" pattern size 580x440 mm white with integral foot rest including connection to trap and flushing pipe complete all as specified and as directed. |
| 78 | Supply only vitreous China valveless, 10 litres capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and as directed. |
| 79 | S & F in repair125mm chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 80 | S&F Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : Jaquar/CERA/Parryware. |
| 81 | S&F of chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA/Parryware. |
| 82 | S&F 600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA/Parryware. |
| 83 | S&F of Soap dish in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA/Parryware. |
| 84 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 85 | S&F110 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall complete all as specified and as directed. |
| 86 | S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 87 | S&F 110 mm PVC (SWR) bends any redius with access door complete all as specified and as directed. |
| 88 | PVC (SWR) gully trap 125/110 mm, settting and jointing with solvent cement in repair complete all as specified and as directed. |
| 89 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete includingfitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materialsfor taking credit and making good disturbed surfaces of walls floors and ceiling complete all as directed. |
| 90 | Point wiring for one light/ fan/bell point controlled by oneswitch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly includingcutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as directed . Make: Havells/ Finolex/ Polycab. |
| 91 | All as per item no 99 above but cable 2.5 sqmm FRLSHfor one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 92 | All as per item no 99 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 93 | All as per item no 99 above but for one 3/6 pin 16 amps socket outlet point on an independent board with cables of size 2.50 sqmm. |
| 94 | All as per item no 99 above but an independent board with cables of size 4.0sqmm complete all as specified and as directed. |
| 95 | S&F for modular switch6 Amps single pole one way230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T |
| 96 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T |
| 97 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T |
| 98 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush typewith outer/inner covercomplete all as specified and directed by Engr In charge. Make:Legrand/Havell crabtree/L &T |
| 99 | S&F in replacement ceiling rose,3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed. |
| 100 | S&F in replacement electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make: Havells Crabtree/ Legrand/ Indoasian. |
| 101 | S&Finreplacement Sheet metal enclosure double door type for MCCB VTPNDB upto 4 wayvertical type 415 volts with suitablebusbar and neutral link,chases wall for fixing DB and making good distributed wall surfaces to match with existing specification incl 100 Amp 4 Pole 16 ka MCCB complete all as specified and directed.Make: Schneider/ Legrand/Havells |
| 102 | S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated,factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 103 | Supply and fixing in replacement 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 104 | S&F in replacement MCB Single Pole,6 to 32 Amps 240 volts, 10KA breaking capacity,convenient to \"C\" Curve complete all as specified and directed. |
| 105 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make-Havells LED Pride Plus Neo Batten 10 W Cat Part No LHEXACP7IN1W010 or Equivalent make in Bajaj/C&S |
| 106 | S & F in repair LED light fitting 1x 9W/10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make- Wipro / Bajaj /Philips |
| 107 | S& F in replacement LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed. |
| 108 | Supply and fixing LED luminaire 10 watt, 220 V AC recess/surface mounted downlighter type with high efficiency PC diffuser soft lightand symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.Make- Havells/ Philips/C&S. |
| 109 | S & F in repairs LED panel decorative down light fitting/recess mounted square type white/ warm white 2X2 36W with high out put diffuser 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified. |
| 110 | S&F of decorative wall mounting 1X9Wfixture with frosted glass along with 9W warm white bulb GLS lamp luminaire complete all as specified and directed by Engineer-in-Charge. |
| 111 | S&F in repair two pin and earth plug and socket with 1 modular MCB single pole 20 to 32amps \"C\" series 10KA inmetal enclosure and connecting complete all as specified and directed. |
| 112 | S & F Exhaust fanmade of sturdy Engineering plastic bodycompletevoltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm with louver shutters all as direceted by Engr-in-charge. Make:Havells/Bajaj/CG. |
| 113 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 10 Sqmm nominal cross sectional area and one run of 10 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia \"medium grade\" PVC concealed conduits and fittings, complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire Make: Havells / Finolex / Polycab. |
| 114 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia \"medium grade\" PVC concealed conduits/existing PVC Conduit and fittings,complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire Make: Havells / Finolex / Polycab. |
| 115 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 2.5 Sqmm nominal cross sectional area and one run of 2.5 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia \"medium grade\" PVC concealed conduits and fittings, complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire Make: Havells / Finolex / Polycab. |
| 116 | Taking down carefully slipt AC of any capcity from bldgs as directed by Engr-In-Charge,opening up for servicing/repairaing , filling Refrigerent Gas if any reqd,removing dust and dirt ,cleaning fan motor with cotton/waste malmal and Replacing defective parts, for the smooth and satisfactory functioning, and reassembling complete,re-fixing Split AC including propertesting & Refixing after said work complete all as specified and directed by Engr-in-Charge. Note:Replacement of unserviceable parts & Refiiling of refrigerent gas shall be deemed fit in quoted rate of contractor |
| 117 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC framewith 40mm thick RCC cover reinforced with 8mm dia deformed barshandle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testingon completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost. |
