Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling kota, granite, cudappah stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortor complete all as specified and as directed. |
| 2 | M&L for machine cut Kota stone flooring 18 to 22 mm thick(size of kota stone slab 18\"x22\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 3 | All as per item No 2.00 here in before but 15-18 mm thick as in risers to steps and skirtinglaid over and including backing coat of 10mm thick in cement mortar 1:3all as specified and as directed.Note: Risers provided to steps shall be in one piece. |
| 4 | M&L for machine cut Kota stone slabs 18 to 22 mm thickas in treads of steps of stair case in single piece with 2 nos V groove cutting laid over and including 10 mm thick cement screed bed in CM 1:3and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rounding and moulding edges, rubbing and mirror polishing complete all as specified and as directed. |
| 5 | M&L for machine cut cudappah stone slab 20-25mm thick for cooking platform, verticals of wash basins and sinks etc including cutting chases in wall and fixing the slab in cement mortar including rubbing and polishing complete all as specified and as directed. |
| 6 | M&L 18 to 20mm thick pre-polished granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/platform, gate pillars, cills etc or on vertical surfaces including vertical projection, urinal partition, including full round moulding the edge, laid overand including screed bed 20mm thick in cement mortar 1:4jointing, pointingin white cement 1:2 using marble dust with admixture or pigment to match the shade of granite and rubbing, polishing to achieve mirror finish complete all as specified and as directed.Note: Colour and shade shall be asapproved by GE. |
| 7 | M&L for 60mm thick, factory made, chamfered edge, cement concrete interlocking paver blocks (glossy/ rubber matt finish) of M-35 grade with approved colour, design & pattern of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks asrequired size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.Note: Size, shape, pattern and shade shall be asapproved by Engineer-in-Charge. |
| 8 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removingrubbish off the premises complete all as specified and as directed. |
| 9 | M&L for glazed white ceramic tiles in vertical surfaces as dado of size450x300x6-7mm, thick set and jointed in neat cementand pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:3 on other than fair faces of brick work etc complete all as specified & as directed.Note: Color, size and shade shall be as approved by Engineer-in-charge |
| 10 | M&L for non skid coloured ceramictiles 7-8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed bed in CM 1:6 etc complete all as specified & as directed.Note: Color and shade shall be as approved by Engineer-in-charge |
| 11 | M&L for non skid coloured ceramicmat finishedtiles 7-8mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (600X600 mm) in floorsset and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6complete all as specified & as directed.Note: Color and shade shall be as approved by Engineer-in-charge |
| 12 | Ditto- all as per Item No. 11.00 above but as in skirtingset and jointed in neat cementand pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4complete all as specified and as directed. |
| 13 | Excavation over areas n. exc 1.50m in depth in any type of soil for foundation etc complete all as specified and as directed |
| 14 | Excavation in trenches not exc 1.50m wide and not exc 1.50m deep for foundation etc . or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed. |
| 15 | Removing excavated soil to distance not exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 16 | M&L for moorum filling in floors or paving, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 17 | M&L for hard core of gauge exc. 63 mm but n. exc. 100 mm, deposited spread and levelled in layers n. exc. 15cmthick, including watering and rammed etc. complete all as specified and as directed. |
| 18 | Demoltion of cement concrete (un-reinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) complete all as specified & directed. |
| 19 | M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic jointfilling at every 3m length and at corners complete all as specified and as directed. |
| 20 | M&L for PCC 25 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate as in levelling course infloors, roofcomplete all as specified & directed. |
| 21 | M&LRCC M25 ( 20mm Graded Aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, floor slab under-reamed piles and mass concrete complete all as specified and as directed. |
| 22 | M&L for mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and includingmild steel wire(annealed) not lessthan 0.9mm dia or securing with clips complete all as specified and as directed. |
| 23 | M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floorcomplete all as specified and as directed. |
| 24 | Demoltion of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landings, chajjas and other similar suspended works and paving complete all as specified & as directed. |
| 25 | M&L for brickwork with fly ash bricks, straight or curved on plan, exc 6 m mean redius,built in cement mortar 1:6 with and including demolition of existing brick work built in cement or cement lime mortarof any description complete all as specified and as directed. |
| 26 | Taking downcement or cement lime plaster of any description on brick, block or stone walls etc (at any height) including racking out joints, hacking for key scrubbing down with water etc complete & removing debris outside MD land as directed. |
| 27 | S&F GI wire cloth 0.90mm dia of wire and 12mm size of mesh, fixed to wall, ceilings, beams etc including all laps and waste with nails,including making V groove in crack portion n exc 10mm deep and n exc 10mm face and rendering with 10mm thick cement mortar 1:3 etc complete all as specified and directed. |
| 28 | M&L for 15 mm thick rendering in cement mortar 1:4 (using water proofing liquid as per manufacturers instruction) onother thanfair faces of brick masonry surfaces orconcrete surfaces, finished even and fair without using extra cement complete all as specified and as directed. |
| 29 | M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement etc complete all as specified & as directed. |
| 30 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling finished the surface even & smooth without using extra cement complete all as specified & as directed. |
| 31 | M&L for preparation of new plastered internal surfaces of ceiling and applying two coat ofacrylic distemper of required shade and colour complete including one coat of primeras per manufacturer\"s specifications in any colour complete all as specified and as directed. |
| 32 | M&L for preparation of new plastered internal surfaces of wall and applying two coat ofacrylic distemper of required shade and colour complete including one coat of primeras per manufacturer\"s specifications in any colour complete all as specified and as directed. |
| 33 | M&L for applying 1.5 mmthick of Birla/ JK wall care putty in new or old decorated surfaces of walls and sanding the surfaces till smooth finish is obtained for receiving finishes complete all as specified and as directed. |
| 34 | M&L for Newly plastered wall surfaces, preparation of surface and applying two or more coats of 100% premium exterior acrylic emulsion paint, Alkali & fungal resistance, dirt resistance, of required shade over and including priming coat of exterior alkali resistant primer applied @ 0.90 litre/ 10 sqm on prepared surface of brick (plastered or un-plastered) or concrete surface complete all as specified and directed by Engr-in-charge. |
| 35 | M&L forcomplete removal of existing treatment on wall/roof projections including facia, cornices, etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour including filling of cracks/holes by crack acrylic filler,applying two coat of 100% premium exterior acrylic emulsion paint, alkali & fungal resistance, dirt resistance of required shade over and including a priming coat of exterior alkali resistant primer on prepared old decorated surfacescomplete all as specified and directed by Engr-in-charge.Note: Model of mechanical sander to be approved by Engr-in-charge/GE. |
| 36 | Takingdown chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 sqmeach and making good the disturbed surface in CM 1:3 complete all as specified and as directed. |
| 37 | Takingdown chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4 sqm each and making good the disturbed surface in CM 1:3 complete all as specified and as directed. |
| 38 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) 100%solid plain type multipanel wire gauge door shutters of size24 mm thick, having integrated ventilating panels (minimum 02 No.) fitted with stainless steel wire gauge of average width of aperture 1.40mm in both directions and wire of dia 0.36 mm fixed within extruded aluminium sub-frames (20mm x 20mm x 1mm thick)recessed into the WPC frame for additional strength and safety purpose. The shutter shall have WPC top & bottom rails of width not less than 100 mm and 200 mm respectively and intermediate rails of width not less than 160 mm. Vertical stiles for shutter shall be minimum 100mm wide from the sidesThe WPC door shutter shall be made from virgin polymer of K value 57-60 |
| 39 | (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge and as per manufacturer instructions. |
| 40 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department. |
| 41 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush/panel door shutter of 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 42 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department. |
| 43 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 60 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per specified and as directed.Note: (i) Minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable for WPC solid door/window frames. Variation in profile dimensions on plus side shall be acceptable without any extra cost to the department. |
| 44 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush/panel door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 45 | S & F powder coated aluminum windows, three track, made out of aluminium sectionsincluding all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprising of following sections :- (a)Window frame:(i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m)(ii) Top & Side - 20672 (Wt not less than 0.594 Kg/m)(b)Shutter: (i)Vertical (end)- 20669 (Wt not less than 0.548 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)Note :Shade shall be as approved by Engineer-in-Charge. |
| 46 | S&F in repair powder coated anodised aluminium ventilator having aluminium section weighing not less than 0.55 kg/m, including aluminium louvers, frosted 3mm thick glass, SS wire mesh, including arrangement for fixing of exhaust fan and necessary joining cleats,glazing clips,screws etc complete all as specified and as directed.Note :Size and Shade shall be as approved by Engineer-in-Charge. |
| 47 | S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and as directed. |
| 48 | S & F 150 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionor cast aluminum alloy complete all as specified and as directed. |
| 49 | S & F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionor cast aluminum alloy complete all as specified and as directed. |
| 50 | S&F 100 mm longSSbutt hinges, medium weight, cold rolled and fixed with screws/welded complete all as specified and directed. |
| 51 | S&F 150mm size aluminium alloy handles, fabricated type extruded section, ISI markedcomplete all as specified and as directed. |
| 52 | S&F in repairs, 18 mm thick WPC Board (Wood Polymer Composite), termite proof, waterproof & screwable & nailable as in fabrication of storage System, cupboards in rooms/kitchen i/c Drawers, shelves, etc. laminated one side with decorativechoice lamination and other side balancingwhite lamination, with teak wood lipping on the edges of the shutters and the box etc. including necessary fixing arrangement on walls with fasteners, complete all as specified and as directed by Engineer-in-charge. |
| 53 | S&F continous (Piano) hinges, brass finish of30mm width of flaps when open complete all as specified and as directed. |
| 54 | S&F in repair magnetic catcher, Double strip (horizontal type),in cupboard/ward robe shutters including fixing with necessary Stainless Steel screws etc. complete all as specified and as directed. |
| 55 | S&F in repairs mild steel helical door spring 300 mm long ordinary rat tail type including roller and roller plate fixed with screws to wooden frame complete all as specified and as directed. |
| 56 | S&Fin repairs20mm dia stainless steel curtain rod with brackets and finials at both ends as per site requirement including taking down old curtain rods with accessories complete all as specified and as directed.Note: The cost of brackets & knobs shall deemed to be included in the quoted rate |
| 57 | S&F in repairstowel rail60 cm long between flangesall as specified and as directed.Make : Cat No. F5015103CH of CERA or equivalent model of makes specified. |
| 58 | S&F in repair sheet glass assembly consisting of 5.5mm thick sheet glass cornershelf complete all asspecified and as directed. |
| 59 | S&F in repairs 5 inches heavy duty Vanilla door stopper mounted with rubber tipof aluminiam alloy body fixed in floorall as specified and directed. |
| 60 | S&F in repairs, 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated screws and cup washers complete all as specified and as directed. |
| 61 | S&F SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples fixed on wooden/steel frames withtinned tacks or galvanized wire staple & complete all as specified and as directed. |
| 62 | Taking up or down 15 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 63 | S&F 15mmbore UPVC pipes Sch 40 including fittings, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed. |
| 64 | S&F 15mmbore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches, any length with fittings such as socket, elbow, bends, tees, reducer, union, caps plug, nipple etc complete laid in walls/ ceiling or laying in floor trench or fixed to walls complete all as specified and directed. |
| 65 | Taking up or down 25 mm bore dia GI steel tubing and connectionscomplete all as specified and as directed. |
| 66 | M&L for 25 mm bore GI tubing medium grade with all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 67 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 68 | S&F mild steel framed work such as grills, framed guard bars and similar work conforming to Fe-290.Gde-E-165, welded to steel ventilators & window complete all as specifiedand as directed. |
| 69 | M & L for Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following (floor area of WC/Bath not exceeding 1.5sqm) :- (a) After demolition of floor and lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square meter duly blended with & including water proofing compound. (c) 15mm thick (Average thickness) plaster in cement mortar (1:4) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. |
| 70 | (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non-woven fabric (weight not less than 150 gm/sqm (e) M&L for PCC 1:7:12 for fillin of sunken portion after conceling all membrane and sealing all joints to the entire with broken bats and light weight,and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts lightgrade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling complete allas satisfaction of Engineer-in-Charge.Note- The rates include for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and groutingwith cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm complete all as specified and directed. |
| 71 | M & L for Water proofing treatment to floor & vertical surfaces of sunken portion complete comprising the following (floor area of WC/Bath exceeding 1.5 but not exceeding 3 sqm) :- (a) After demolition of floor and lime concrete etc. remove all loose particles along with existing water proofing treatment (any no. of layers) with wire brushes and cleaning the surfaces with water. (b) Brushing cement slurry with 1.2 kg of cement per square meter duly blended with & including water proofing compound. (c) 15mm thick (Average thickness) plaster in cement mortar (1:4) mixed with WP compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. |
| 72 | (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non-woven fabric (weight not less than 150 gm/sqm (e) M&L for PCC 1:7:12 for fillin of sunken portion after conceling all membrane and sealing all joints to the entire with broken bats and light weight,and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts lightgrade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling complete allas satisfaction of Engineer-in-Charge.Note- The rates include for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and groutingwith cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm complete all as specified and directed. |
| 73 | S&F in repairs, stainless steel sink with drain board made of 1mm thick sheetfor kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 350mm x 185 mm including CP coupling complete all as specified and as directed.Make : Cat No. SBSD 05 (RR) of JAYNA orElegance Small of Nirali or equivalent model of makes specified. |
| 74 | M&L in repairs, for water proofing treatment to RCC roof slab, including parapet, comprising with the followingtreatment/specification from bottom to top:-(i) Taking out old roof treatment and roughening the old concrete slab by picking, sweeping clean and washing down with water to remove dust etc and disposal of rubbish outside MoD land.(ii) Screed bed or bedding layer of 10 mm thickcement mortar 1:4 with mixing of WPC as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3kg/sqm. (iii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986.(iv) APP based polymeric membrane 3mm thick (minimum),weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall beapplied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction.(v) Applying two coat of bituminous aluminium paint over the APP modified membrane @ 0.11Kg/sqm.Note: Water proofing compound will be measured & paid separately. |
| 75 | Supply only liquid water proofing compound complete, ISI mark all as specified and as directed. |
| 76 | S&Fin repairs, rotational moulded polyethylene water storage tanks ,white colour,(cylindrical vertical with closed top), 1000 litres capacity, tripple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe (minimum weight not less than 210 grams) and connecting complete all as specified and as directed. |
| 77 | S&F in repairs, bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed.Make : Cat No. F1015151 of CERA or equivalent model of makes specified. |
| 78 | S&F in repairs, two way bib tap 15mm dia, with wall flange and aerator screwed down for iron pipe or for brass ferrule complete all as specified and as directed.Make : Cat No. F1015161 of CERA or equivalent model of makes specified. |
| 79 | S&F in repairs, 15 mm bore pillar taps, cast copper alloy with capstan heads, fancy type, chromium plated screwed down high pressure with or without lettered \"HOT\" or \"COLD\" with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.Make : Cat No.F2014101 of CERA or equivalent model of makes specified. |
| 80 | S&F in repairswall mixer for mixing hot and cold water and bend for connecting to shower,15 mm borescrewed for iron pipe and fixed complete all as specified and as directed.Make : Cat No. F1015401 of CERA or equivalent model of makes specified. |
| 81 | S & F in repairs, angle valves, 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and as directed.Cat No. F1015201 of CERA or equivalent model of makes specified. |
| 82 | S&Fin repairs 20mm dia gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union,ISI marked complete all as specified & as directed |
| 83 | S & F in repair stainless steel grating with square frame (grating thickness 1mm and frame thickness 1.5mm) of size 125mm (minimum) with waste hole complete all as directed. |
| 84 | S&F in repairs, 32/ 40 mm bore PVC flexible outlet pipes for wash basin/ sink/ urinal fixed complete all as specified and as directed. |
| 85 | S & F in repairs, PVC connections, 15 mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 86 | S&F in repairs, 75 mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floorsall as specified andas directed. |
| 87 | S&F in repairs, 110mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wallsall as specified andas directed. |
| 88 | S&F in repairs, 75mm bore, PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls all as specified andas directed. |
| 89 | S&F in repairs, 75 mm dia PVC (SWR) bendsof any radiuscomplete all as specified and as directed |
| 90 | S&F in repairs, 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed |
| 91 | S&F in repairs, 75 mm dia PVC (SWR) vent cowl complete all as specified and as directed |
| 92 | S&F in repairs, 75 mm dia PVC (SWR) branch piece, double ( Single T) equal or unequal of any radiuscomplete all as specified and as directed |
| 93 | S&F in repairs, 110 mm dia PVC (SWR) junction single (Single T) equal or unequal of any radiuscomplete all as specified and as directed |
| 94 | S&F in repairs, 75 mm dia PVC(SWR) nahani/floor trap withgrating including jointing to waste pipe with solvent cement complete all as specified and as directed. . |
| 95 | S&F in repairs,Health faucet (ABS Body)suitable for 15 mm dia pipe with 1 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.Make : Cat No. F8030111AB of CERA or equivalent model of makes specified. |
| 96 | S&F in repair over head shower rose 125mm size with 200mm long shower arm and wall flangeall as specified & directed by Engr-in-charge.Make : Cat No. F7020111AB of CERA or equivalent model of makes specified. |
| 97 | S & F in repairs vitreous China, white, squatting pan, Orissa pattern of size 580 X 440 mmwith integral foot rests (excluding flusing cistern)includingtraps &set in cement concrete as specified including flush pipe and connecting to trap complete all as specified and as directed. |
| 98 | S&F in repairs, vitreous china wash down water closet (pedestal pattern) white, including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.Make : Cat No. S1053102of CERA or equivalent model of makes specified. |
| 99 | S&F in repairs 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white with inlet ball valve and handle including brackets completeall as specified and as directed.Make : Cat No. B1010110of CERA or equivalent model of makes specified. |
| 100 | S&F in repairs,vitreous china wash basinwhiteof size 550mm x 400mm with bracketsincluding, waste pipe, CP waste coupling 32 mm bore, PVC connection pipe completeall as specified and as directed. Make : Cat No. S2040141 of CERA or equivalent model of makes specified. |
| 101 | S&F in repairball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 15 mm bore compete (Minimum weight 210 gm) complete all as specified & as directed. |
| 102 | S&F 110 mm dia stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed. |
| 103 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc and matching with existing surface complete all as specified and as directed. |
| 104 | M & Lpoint wiring complete with and including single core PVC insulated unsheathed flexiblebright annealed multi stranded copper conductorFRLS (H) cables 1.5 Sqmm (22/0.30 mm) 1100 volts grade drawn through and including heavy grade PVC rigid conduits 20 mm or higher dia as reqd at site,totally concealed inwalls/floors/ceilingincluding all conduit accessories/ fittings/ junction boxes/ inspection covers etc; of heavy grade, ISI marked and sunken terminal boxes of factory made 16 SWG pressed steel housing, totally concealed in wallswith 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/cup washers, for mounting of switches, sockets fan regulates etc; including 1.5 Sqmm (22/0.30 mm) 1100 V gradePVC insulated, unsheathed flexiblemulti stranded copper conductorFRLS (H) cable as continuous earth wire connected to metallic bodies of luminaries/fans etc; at one end and to common earth dolly at other end, all as specified & directed forlight point or one fanpoint controlled by one, one way switch |
| 105 | NOTES: (a)Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW, BLUE for Earth-Green and Neutral-Black) (b) The unitrate quoted shall deeemed to be included cutting chases in walls for concealed wiring & making gooddisturbed surfaces .(c) All points shall be earthed up to fixtures i.e holders, tube lights, all lights, ceiling lights, bulkhead lights, bldg security lights etc. |
| 106 | All as per serial item No 101.00 here in before but for one 3 pin 6 Amp Socket outlet point on same board with other switches including earth wire as per description given above and connected to common earth and earth terminals. |
| 107 | All as per serial item No 101.00 here in before but for one 3 pin 6 Amp Socket outlet point on independent board including earth wire as per description given above and connected to common earth and earth terminals. |
| 108 | All as per serial item No 101.00 here in before but with 2.5 Sqmm cables for one 16A, 6-Pin (multipurpose) socket outlet pointon independent board with & including 2.5 Sqmm FRLS (H) cable as earth wire complete all as specified and as directed. |
| 109 | All as per serialitem No. 101.00here in before butfor one light point controlled by 2 two way switches |
| 110 | All as per serialitem No. 101.00here in before butfor one bell/buzzer point controlled by one push button on the same board with other switches or independent. |
| 111 | S&F switch piano, flush button, 6 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed. |
| 112 | S&F socket outlet, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & asdirected. |
| 113 | S&F switch socket combination, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & asdirected. |
| 114 | S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 6/16 Amps, 230V, AC. all as specified & asdirected. |
| 115 | S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & asdirected. |
| 116 | S&F lamp holder, angle/ batten type, PVC/Polycarbonate type with back plate, suitable for batten fittings all as specified & asdirected. |
| 117 | S&F fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, sockettype, 230 volts, suitable for ceiling fan 1200/1400mm sweep complete all as specified & asdirected. |
| 118 | S&Fbell,AC, 230 volts, single phase complete all as specified and as directed. |
| 119 | S&F bell push, flush type, 6 Amp, single pole, 230 volts all as specified & as directed. |
| 120 | S&F switch piano, flush button, 6 Amp, single pole, 2 way, 230 volts, white finish all as specified & as directed. |
| 121 | S&F in replacement decorative ultra slim batten square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientof capacity 20 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No. LHEXAWP7UN1W020 of Havells or equivalent of makes specified in PS |
| 122 | S&F in replacement Emergency / Inverter LED batten 20W 6500K with square profile and polycarbonate channel, lithium-Ion battery with charging time 8hours-10 hours, back up time up to 4 hours and surge protection up to 4KV including connecting up with suitable flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No. LHEXACP7FN1W020 Pride Plus Inverter Batten 20W 6500 KV1 of Havells or equivalent of makes specified in PS |
| 123 | S&F in replacement decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientof capacity 10 Watt , 6500 K with inbuilt driver complete fitting and all other accessories fitting arrangements including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.Make : Cat No. LHEXACP7IN1W010 of Havells or equivalent of makes specified in PS |
| 124 | S&F in replacement, inverter emergency LED bulb 12W 6500K with backup time upto 4 hours complete all as specified and directed by Engineer-in-charge.Make: Havells Cat part No. LED 12 W B22 CDL INVERTER BULB or equivalent model of makes specified. |
| 125 | Supply and fixing in factory made powder coatedsheet metal enclosure, TPN Vertical Distribution Boards withMCCB four pole 16 KA, 63 Amp with fixed thermal and magnetic settings asincomer IP43 protection Double Door : Plain 4 way with suitablerated busbar,neutral link, andMCB SP as outgoings complete all as specified and directed. Note : MCCB and MCBs are not included in this item and shall be measured and paid separetely. |
| 126 | S&F in replacement, MCCB 4 Pole, 415 V, adjustable type, 63 Amps with breaking capacity 16 KA and making connection with suitabl size of copper lugs etccomplete all as specified and as directed. |
| 127 | S&F in replacement LED light fitting 1x 9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with two core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 128 | M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLSH cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn through concealed conduit and including PVC conduit heavy grade alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLSH copper conductor as continous earth wire and connecting to common earth terminalsand testing on completion including taking down old submain wiring and casing caping complete all as specified and as directed.NOTES: (a) Proper colour coding shalladopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 4 sq.mm cable and one run of PVC conduit shall be measured as one unit. |
| 129 | M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed FRLSH cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn through concealed conduit and including PVC conduit heavy grade alongwith one run of 6 sqmm single core PVC insulated & unsheathed FRLSH copper conductor as continous earth wire and connecting to common earth terminalsand testing on completion including taking down old submain wiring and casing caping complete all as specified and as directed.NOTES: (a) Proper colour coding shalladopted for wiring (for phase-RED, YELLOW, BLUE for Earth- Green and Neutral-Black) (b) Three runs of 6 sq.mm cable and one run of PVC conduit shall be measured as one unit. |
| 130 | S&F in replacement sheet metal single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp 240 Volts complete all as specified and as directed. |
| 131 | S&F in repairs, MCB SP, AC 240 V, 6 to 32 Amps, 10 KA capacity ,\"C\" series, making connection with suitable size of copper lugs etccomplete all as specified and as directed. |
| 132 | S&F in repairs, MCB SPN, AC 240 V, 40 to 63 Amps, 10 KA capacity ,\"c\" series, making connection with suitable size of copper lugs etccomplete all as specified and as directed. |
| 133 | S&F in repairs, MCB DB, double doortype(when MCBs are to be used), single pole and neutral, 240 volts,12 way,protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming as per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copperbusbar, with Neutral bar, Earthbar and cable alley for cable managment, fully shrouded, Neutral bars, prefittes masking sheet complete all as specified and as directed. |
| 134 | S&Fin replacement 35 Wattbuilding mounted LED security light fitting complete made up of pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 & 10KV external SPD, including GI bracket made out of GI pipe 40/50 mm bore, medium grade pipe 1.2m long bend to shape requiredfixed to pole / wall with 02 Nos MS clamps made out of flat iron 40x5 mm including nuts, bolts and washer, painting with two coats aluminium paint over a coat of primer, suitable for LED fitting complete all as specified and as directed.Make : Havells Cat No ENDURASUNDOWNSL35WLED765PASYBOPC or equivalent model of makes specified. |
| 135 | M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia, by means of nut bolts, check nuts and washer andthe GIEarth wire connected upto main earth point/DBs alongwith 15mm dia GI medium grade protection pipeincluding provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4)cover with reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape,GI light |
| 136 | grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh andearth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.Note : Rate of GI earthwire and GI protection pipe upto 7.5 mtr length shall be deemed to be included in this item |
| 137 | Supply & fixexhaust fans PVC bodyAC single phase 230/ 240 V of size 200 mm sweep,1760 RPM, air delivery 252 CMH with louver electrical connectionfrom ceiling rose to Exhaust Fan complete all as specified and as directed by Engineer in Charge. |
| 138 | Supply & Fix in replacement of Weather proof SMC Meter boxes of size 700 x 480 x 210 mm Doubled hinged doors and fixing of meters and connections including taking down of Old meters etc and refixingcomplete all as specified and directed by Engr-in-charge. Make: Syntex Cat No GSMB 7450 or equivalentapproved make |
| 139 | S&F glint USB charger, 2 module, 3A all as specified and directed. Make: Indo Asian Cat Part No. 810651 or equivalent in Havells / Anchor / Legrand. |
| 140 | M & L for Taking down from site unserviceable Exhaust fans ofsweep 300 mm any make with blades,transporting to local workshop,opening,cutting out complete copper winding,cleaning with kerosene oil/diesel/terpentine oil and dried out,rewinding with new super enamelled copper wire of suitable size and guage and number of turns as recommended by the respective manufactures,varnishing and heating the winding including providing paper paper insulation (cuff/strip) replacing unserviceable providing paper insulation replacing unserviceable/missing spare parts and reasemblingand ensure Speedy and noiceless running andFixing at site in position complete all as specified and directed by Engr-in-Charge. |
| 141 | M & L for Taking down from site unserviceable ceiling fan 1200 mm sweep any make with blades,transporting to local workshop,opening,cutting out complete copper winding,cleaning with kerosene oil/diesel/terpentine oil and dried out,rewinding with new super enamelled copper wire of suitable size and guage and number of turns as recommended by the respective manufactures,varnishing and heating the winding including providing paper paper insulation (cuff/strip) replacing unserviceable providing paper insulation replacing unserviceable/missing spare parts, repacement of suitable ball bearing,canopy sets,rubber rell,connector block,capacitor and painting with super enamelled heat resistance synthetic white paint and writing the MES number with black paint etc and fixing the stator in rotor properly aligned and reasembling ensuring right DOR ,Speedy and noiceless running andhanging at site in position complete all as specified and directed by Engr-in-Charge. |
| 142 | M & L for Taking downcarefully water Geyser 25 ltrs capacity by unscrewiring nuts bolts, water inlet/outlet pipes from walls/foundation complete including refixing in position after carrying repairs like change of suitable geyser element,themostat,inlet outlet pipes,16 Amp plug top,replacement of burnt wire,safety valve,non return valve, solving geyser leakage problems etc. including making connection to the water inlet, outlet pipe, electric connection and testing complete all as specified and directed by Engineer-in-charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
