Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | [B&R PORTION]Demolition of brick work built in CM incl all quions arches, pillar etc all as specified and directed. |
| 2 | Material and labour for brick work withold size sub class ‘B’ bricks,straight or curved on plan to any radious built in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 3 | All as per Item No 2.00 here in above but except bricks complete all as specified and directed by Engineer-in-Charge. |
| 4 | Material and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed by Engineer-in-Charge. |
| 5 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material and labour for 5 mm thick cement plaster in CM 1:3 as in soffits of slabs/Chajja/ Sunshade finishing the plastered surface even & smooth w/o using extra cement etccomplete all as specified and directed by Engineer-in-Charge. |
| 7 | Material and labour for Rendering 10 mm thickon fair faces of brick work or concrete surfaces, finished even and fair (without using extra cement) on walls in cement mortar (1:6), complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar 1:4, using water proofing compound complete all as specified and directed by Engineer-in-Charge.NOTE:WPC will be measured and paid for separately |
| 9 | Material and labour for rough cast plastering over and incl 10 mm thick rendering in cement mortar 1:3 and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered Rough cast plaster shall be applied asspecified clause 14.22 of SSR Part-I, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supply only integral water proofing comound ISI Marked complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material and labour for preparation of exposed brick wall surface by cleaning the surface with wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks.Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day.Note : Further treatment over the surface so achievedwill be carried out only after approval of the same by GE.Note:- This item shall be executed by authorised applicator only. for carrying out efflorescence treatment to exposed and prepared wall surfacehere–in–abovein following sequence :–(a) Prime the prepared surface with one of the following product mixed with cement in 1:1ratio as bonding agent :– (i) Pidicrete URP of M/S Pidilite (ii)Sika Latex of M/s Sika (iii) Nitobond SBR Latex of M/s FOSROC(b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied \"BY HAND\" while the primer is tacky.PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer\"s instructions :–(i) Pidicrete URP of M/S Pidilite (ii)Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(c) PMM surface should be allowed to dry one day.After that it shoud painted with two coats of one of the following compound mixed with cement only in ratio of one part of selected compound and one point fire part of cement :–(i) Pidicrete URP of M/S Pidilite (ii)Sika Latex of M/s Sika (iii) Nitobond SBR Latex of M/s FOSROC(d)Now apply two coats of one of the following compound over the surface.These compounds are to be used as per manufacturer instructions :–(i) Pidifin 2K of M/S Pidilite (ii)Brush Coat of M/s Sika (iii) Brush Bond of M/s FOSROCNote : Both coats should be perpendicular to each other and gap between two coats shall be minimum 6 hours.(e) Sprinkle loose coarse sand after second coat while surface is tacky.Note: (i) Item will be executed by authorised applicator of the selected /approved company only. (ii) Every stage of work will be approved by GE then only next layer will be executed by contractor. |
| 12 | Material and labour for applying Two or more coats of 100 % Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt restance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltre/10 Sqm over and icluding priming coat of exterior primer applied @ 0.90 litre/10 Sqmover new/Oldsurfaces complete as all specified and directed by Engineer-in-Charge. |
| 13 | Material and labour for providing and applyingwall care putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as all spfd and directed. |
| 14 | Material and labour for two coats of white lime wash over old plastered surfaces of ceiling including preparation of surfacescomplete all as specified and directed by Engineer-in-Charge. |
| 15 | Material and labour for applying two coats of acraylicdistemper over a coat primer of Chalk whiting over2mm thick wall care putty includingon newly plastered surfaces on prepared surface complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and labour for complete removal of existing treatment and applying two coats of oil bound distemper on wall over a coat of 2mm thick birla wall care puttyincl preparation of surface complete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and labour for preparation of old Plastered or un-plastered surfacesof walls cornices etc by brooming down or steel wire brushing, scrapping down smoke soot moulds, moss, efflorescence salts treating oil and greasy spots etc and applying two coat of white wash on wallscomplete all as specified and directed by Engineer-in-Charge. |
| 18 | Material and labour for Applying three coat of white washing on newly plastered wall surfaces, including preparation of surfaces, complete all as specified and directed by Engineer-in-Charge. |
| 19 | Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors) beams, slabs, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material and labour for Use and waste of form work to sides & soffits of plinth bands , lintel band, Shelves etc including, shelves etc. complete all as specified and directed by Engineer-in-Charge. |
| 21 | Material and labour for Use and waste of form work to chajjas and similar work for fair finish surfaces complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material and labour for reinforced cement concreteType B-1, 1:2:4 (20mm graded aggregate) in slabs supported on walls and, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs andslab cover the like complete all as specified and as directed. |
| 23 | Material and labour for reinforced cement concreteType B-1, 1:2:4 (20mm graded aggregate) in slabs supported on walls and, beams and columns in floors, roofs, landings, balconies, chajjas and the like complete all as specified and as directed. |
| 24 | Material and labour mild steel 10 mm dia and over TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and labour for post anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by the Engineer-in-Charge. |
| 26 | Material and labour for post anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed by the Engineer-in-Charge. |
| 27 | Material and labour for post anti termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed by the Engineer-in-Charge. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by the Engineer-in-Charge. |
| 29 | Material and labour for 25mm thick cement concrete Type B1 1:2:4 (12.5mm graded aggregate)as in floor finished rough to recieve floor finishes etc, complete all as specified and directed by the Engineer-in-Charge. |
| 30 | Material and labour First quality, Non skid ceramic, coloured, rectified i.e. straight edge (locally known as joint free) tilesof size 600 x 600mm each and of thickness not less than 7mm, in skirting etc. over & including 10 mm thick cement mortar (1:4) screed, set and jointed with tile adhesive with notched trowel and pointed in grout of matching shade of tiles, complete all as specified and directed by the Engineer-in-Charge. |
| 31 | Material and labour for non skid coloured ceramic tiles 400 x 400 x 7 to 8 mm set & jointed with neat cement slurry & pointed in white/coloured cement to match the tiles over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 32 | Material and labour for glazed ceramic colouredtiles 450x350x7 mm thick onvertical surface such as skirting , dado etc. over 10 mm thick backing coat plaster in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 33 | Material and labour for Granite jet black shade, 16-18 mm thick, machine cut, machine polished,bedded and jointed with adhesive suitable for granite/stone & pointed with grout of matching shade including necessary cutting over & including 15 mm thick(average thickness) cement mortar(1:4) screed, as in cookingplatform,shelves,RCCcounters,windowcills&similarsituations,complete all as specified and directed by the Engineer-in-Charge. |
| 34 | Material and labour for rounding to edgesof stone (of any description) slabs one edge, such as in steps, cooking platform, window cill ,jamb and other similar situations including rubbing and polishing (mirror finish), complete all as specified and directed by Engineer-in-Charge. |
| 35 | Taking down chowkaths or frames n.exc 1.5 sqm (without takingoff shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed by the Engineer-in-Charge. |
| 36 | Taking down chowkaths or frames Exc 1.5 sqm but n.exc 4 sqm(without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc, complete all as specified and directed by the Engineer-in-Charge. |
| 37 | Taking down shutters of any description n exc 1 Sqm each and removing from the site complete all as specified and directed by Engineer-in-Charge. |
| 38 | Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified and directed by the Engineer-in-Charge. |
| 39 | Supply and fixing Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including fixing lugs,125 mm size MS hinges, lock strike plate, etc. complete all as specified and directed by the Engineer-in-Charge. |
| 40 | Supply and fixing Pressed steel frames for doors of size 125mm x 60mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate,complete all as specified and directed by the Engineer-in-Charge. |
| 41 | Supply and fixing factory made 35mm thick 2nd class hardwood plain frame panelled shutterwith lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides.The size of rails stile as per I:S:1003 (Part I) kiln seasoned and chemically treated. , complete all as specified and directed by the Engineer-in-Charge. |
| 42 | Material and labour IInd class hardwood factory made 30mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) supplt and fixed to choukats complete all as specified and directed by Engineer-in-Charge at site. |
| 43 | Supply & fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified and directed by Engineer-in-Charge. |
| 44 | Supply andfixing Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face includingfixing in frame at site with 03 Nos SS hinges, 02 Nos aluminium tower bolt 200 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed by Engineer-in-Charge. |
| 45 | Supply & fixing of stainless steel butt hinges 100 mm long medium weight complete all as specified and directed by the Engineer-in-Charge. |
| 46 | Supply and fixing 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed by the Engineer-in-Charge. |
| 47 | Supply and fixing of mild steel pressed handle, 150mm long, oval type, stove enameled black, complete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing of250 mm long mild steel sliding door bolts ,plate type, stove enamelled black,with bright bolt not less than 12mm with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple plate complete all as specified and directed by Engineer-in-Charge. |
| 49 | Material and labour for steel window box type using ERW hollow \"P\" section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick,jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable complete inclusive of guared bars 12mm square bar including taking down old unserviceable windows, complete all as specified and directed by Engineer-in-Charge. Note: (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery (iii) Glazing, wire mesh & painting grill shall be measured & paid for separately. |
| 50 | Supplyand fixing Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed by the Engineer-in-Charge. |
| 51 | Supply and fixing mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe 310-0 complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply and fixing(in repair) 0.80 mm thick mild steel plain black sheeting as in covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fixing Plain Sheet glass 4 mm thick, ordinary quality and glazing with linseed oil pane putty & spring glazing clips, in squares not exceeding 0.5 Sq. mm in each pane, complete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fixing 4 mm thick figured glass pin head type and glazing with oil putty in sq n exc 0.5 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 56 | Material and labour for painting surfaces of wood (old) for any description not otherwise described over 10cm width or girth by applying one coats, of synthetic enamel paint including preparation complete all as specified and directed by Engineer-in-Charge. |
| 57 | Material and labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint incl preparation of new surfaces complete all as specified and directed by Engr-in-charge. |
| 58 | Supply and fixing 300 mm MS ordinary rat tail rod pattern springs incl roller and roller plate fixed to wooden chwkhats or welded to angle iron door frames, complete all as specified and directed by the Engineer-in-Charge. |
| 59 | Supply only 50 mm long cold rolled mild steel butt hinges medium weight, complete all as specified and directed by the Engineer-in-Charge. |
| 60 | Supply and fixing stainlesssteel curtain rod 25mm dia having wall thickness 1.6mmfixed with and including stainless steeldecorative brackets, two lotto for each road length at both endetcas in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | Supply and fixing SS peg set of 5 size 300x20x2.5mm complete all as specified and directed by the Engineer-in-Charge. |
| 62 | Supply and fixing band , straps,supports or stays for rain water, ventilating pipes including bolts, if required: hooks (stay) , heavy, for large gates: hook and pintle hinges large hasp and staples, chain hand made sliding bolts clamps hold fasts wall ties: hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters: knee piece inserts; two ways and three way sstraps, plate washers and similar small articles conforming to fe-290 gde E-165, complete all as specified and directed by the Engineer-in-Charge. |
| 63 | Supply and fixing factory made mild steel door shutter with frame, fabricated from of 1 mm thickMS sheetincluding provision of steel handle & locking arrangement by providing 04 leaver lock with duplicate keys (of make Godrej, Link or Harrison) & handle etc, (all as per Godrej pattern & detail shown on Drawing No. FD-1032 sheet 1/1 dtd 25.9.93) including spray painting over a coat of red oxide primer and fixed the same on existing cupboard nitch with cement & sand mortar, complete all as specified and directed by the Engineer-in-Charge. |
| 64 | Supply and fixing in repairstainless steel plate rack of standard size 750mmx600mm x250 mm complete and fixing with rawl plug and steel screws of wt not less than 8kg each, complete all as specified and directed by the Engineer-in-Charge. |
| 65 | Supply and fixing rubber strips 3 to 4mm thick & 65mm to 75mm wide fixed on bottom rail of door for covering gaps between door & floor to aviod entry of insects,dust etccomplete all as specified and directed by the Engineer-in-Charge. |
| 66 | Supply and fixing 150 mm overall length of cover plate Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by the Engineer-in-Charge. |
| 67 | Dismantling woodenboarding any description, fixed in any position with nails as in shelves of cup board and pelmets of any description, complete all as specified and directed by the Engineer-in-Charge. |
| 68 | Supply and fixing for LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of both side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen /bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed by Engr–in–Charge. |
| 69 | Supply and fixing for LEAD FREE PVC Celuka ply 18mm thick (Minimum density 600kg/Cum) of single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws, solvent cement /adhesive to make kitchen cabinet shutters and shelves complete as per manufacturer’s specifications complete all as specified and directed by Engr–in–Charge. |
| 70 | Supply and fixing for 12mm thick LEAD FREE PVC Celuka ply (Minimum density 600kg/Cum) of fixed with stainless steel screws, solvent cement /adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed by Engr–in–Charge. |
| 71 | Supply and fixing for ‘D’ type cabinet handles premium quality, stainless steel grade 304, gloss chrome, SN finished 150mm long matt finishedcomplete all as specified and directed by Engr–in–Charge. |
| 72 | Supply and fixing for Auto closing hinges of size 35mm of 0 crank (KH–001) of 8 crank (KH–002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr–in–Charge. |
| 73 | Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store ,complete all as specified and directed by the Engineer-in-Charge. |
| 74 | Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed by the Engineer-in-Charge. |
| 75 | Supply & fixingChlorinated PVC (CPVC) SDR-11pipes 16 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,i.e fixingthe pipe with clamps at 1.0 m spacing . this includes jointing of pipe Supply & fixings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed by the Engineer-in-Charge. |
| 76 | Supply & fixingChlorinated PVC (CPVC) SDR-11pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings,i.e fixingthe pipe with clamps at 1.0 m spacing . this includes jointing of pipe Supply & fixings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed by the Engineer-in-Charge. |
| 77 | Supply and fixingin repairsvitreous China squatting pan of “Orissa Pattern” of size 580x440mm colouredwith integral footrest complete including making good floors complete all as specified and directed by Engineer-in-Charge. |
| 78 | Supply and fixing in repair10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe all as specified. |
| 79 | Supply andfixedin repair vitreous china wash hand basin white flat back of size 550x440mm including CI brackets ,chromium plated waste coupling, waste pipe etc.,complete all as specified and directed by Engineer-in-Charge. (incl all waste fittings) |
| 80 | Supply and fixing in repair ofpillars taps fancy typechromium plated cast copper alloy with capston head long screwed shanks of 15mm bore complete all as specified and directed by the Engineer-in-Charge. |
| 81 | Supply and fixing two way angle valve cock chromium plated brass fancy type bore 15 mm complete all as specified and directed by Engineer-in-Charge. |
| 82 | Supply and fixing for corner glass shelf with CP stand complete all as specified and directed by Engineer-in-Charge. |
| 83 | Supply and fixing in repair 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union in repair complete all as specified and directed by the Engineer-in-Charge. |
| 84 | Supply and fixing in repairs stainless steel grating openable 100mm sqmm size with/without hole including fixing with white cement complete all as specified and directed by Engineer-in-Charge. |
| 85 | Supply and fixing in repair angle valve cock chromium plated fancy type 15 mm bore with flange make L & K code No 077A or equivalent complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply and fixing in repair 15mm bore Gun-Metal, globe or gate valves , with iron wheel head,screwed down both end for iron pipe and fixed all as specified and directed by Engineer-in-Charge. |
| 87 | Supply and fixing in repairStop valves, cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, all as specified, of 15mm bore, fancy type, chromium plated with long shank and cup (Concealed type). |
| 88 | Supply and fixingin repair fancy type shower rose125mm dia sizeof Rim and 30cm long CP brass pipe with swiwel joint in complete all as specified and directed by Engineer-in-Charge. |
| 89 | Supply and fixing sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long. |
| 90 | Supply & Fix in repair Soap dish any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by the Engineer-in-Charge. |
| 91 | Supply and fixing in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by the Engineer-in-Charge. |
| 92 | Supply and fixing in repairfor PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed by the Engineer-in-Charge. |
| 93 | Supply and fixing in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, waste pipe complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply and fixing in repairs 600x450mm size bevelled edge looking mirror of selected quality glass mounted on 12mm thick marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, CP screws, cup and washers, complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply and fixing for 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls /trenches includingdismantling of existing pipes of any description any length complete all as specified and directed by Engineer-in-Charge. |
| 96 | Supply and fixing PVC (SWR) 75 mm pipe type A single socket in any length with rubber ring joints laid in floors or trenches includingdismantling of existing pipes of any description any length complete all as specified and directed by Engineer-in-Charge. |
| 97 | Supply and fixing of PVC (SWR) bends 40 mm bore complete all as specified and directed by the Engineer-in-Charge. |
| 98 | Supply and fixingof 40 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge. |
| 99 | Supply and fixingPVC(SWR)bends, for 110mm bore pipes, with access doors, complete all as specified and directed by Engineer-in-Charge. |
| 100 | Supply and fixingof PVC (SWR) bends 75 mm bore complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply and fixingof 110 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge. |
| 102 | Supply and fixingof 75 mm bore PVC (SWR) junction single T (equal or unequal), including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge. |
| 103 | Supply and fixing in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer dia metre outlet of 75 mm complete all as specified and directed by Engineer-in-Charge. |
| 104 | Supply and fixingof 110 mm bore PVC (SWR) vent cowl complete all as specified and directed by the Engineer-in-Charge. |
| 105 | Dismantling old unserviceable cement concrete/PVC water tanks of capacity exc 250 ltrs & n.exc 500 Ltrs including supplying & fixing of PVC water storage tank 500 ltr capacity HDPE triple layered ,white colourcylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection incl locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight20 mm - 210 gms ) fixed as in repairs.Note :(i) Inlet, outlet & wash out pipe will be measured paid for separately. |
| 106 | Demolition and breaking up 150 mm bore drain pipes (salt glazed stone ware pipes) set in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 107 | Material and labour for Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified and directed by Engineer-in-Charge. |
| 108 | Material and labour for Reinforced concrete pipes, class NP3, laid and jointed completewith collars of 150mm bore laid in trenches and jointed complete all as specified and directed by Engineer-in-Charge. |
| 109 | Material and labour for salt-glazed stoneware gully traps,150x150 square or round mouthed, type \"P\" setting and jointing to drains with cm 1:1., complete all as specified and directed by the Engineer-in-Charge. |
| 110 | Material and labour for PCC 1:2:4 type B-1 (20mmgraded stone aggregate )as in coping/ benchingetc including necessary form work complete all as specified and directed by Engineer-in-Charge. |
| 111 | Material and labour for plain cement concrete 1:4:8 , type D-2 (using 40 mm graded stone aggregate) as in fdn , filling and mass concrete complete all as specified and directed by Engineer-in-Charge. |
| 112 | Cleaning of sludge from the manholes by taking out loose sediment sand, girt, ash, sludge water, rags, fibres or vegetation from manholes including removal of sludge/debris to a distance exceeding 250m but not exceeding 500m and buried under groundcomplete all as specified and as directed by the Engineer-in-Charge. |
| 113 | Demolition ofreinforced Cement Conc of any description & in any position comp incl cutting of reinforcement complete all as specified and directed by Engineer-in-Charge. |
| 114 | Material and labour precast concrete cover slabs for drain man hole/drain etc.in 1:2:4 type B-1 using 20 mm mechanically crushed graded stone agg.set in CM 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 115 | Demolition of cement concreteunreinforced of any description andin any position not otherwise specifically provided for, complete all as specified and directed by the Engineer-in-Charge. |
| 116 | Material and labour, 75 mm thick PCC 1:3:6 C-2 using 40mm graded stone agg in path/plinth protection finished even & smooth completed without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 117 | Material and labour PCC 1:3:6 C-1 using 20 mm graded stone agg as in surface channel or drain incl use of necessary from work for fair finishedsurface, complete all as specified and directed by the Engineer-in-Charge. |
| 118 | Supply and fixing for heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor 1:4 bedcomplete all as specified and directed by Engineer-in-Charge.(Note: Design/pattern shall be as approved by GE before execution of work) |
| 119 | Material and labour for providing and laying factory made chamfered edge cement concrete paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern, over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete including dismanteling of existing stone slab and tiles of any discription any type and sub base of the premises complete all as specified and directed by Engineer-in-Charge. |
| 120 | Dismantling of brick or terracing tiles of single layers on roofs incl cleaning of bricks/tiles and removal of unusable bricks/tiles and removal from site, complete all as specified and directed by Engineer-in-Charge. |
| 121 | Wire brushing and cleaning theroof surfaces with water including flashings and junction of parapets complete all as specified and directed by Engineer-in-Charge. |
| 122 | Demolition of mud in roof any thickness whether full thickness removed or part thereof including plaster & leaping complete all as specified and directed by Engineer-in-Charge. |
| 123 | Material and labour for APP polymeric water proofing membrane minimum 3 mm thick and weighting not less than 3.0 Kg/Sqmblack finish reinforced with non-woven polyster matt wt not less than 150 gms/Sqm with thermo fusable finish laid over compatible bitumen primer at the rate of 0.40 Ltr/Sqm torching over laps with a propane or abutan gas torch with a over lap of 75 mm at the side and 100 mm at the ends and sealing including applying a coat of cold emulsion bituminious primer all as per manufacturers instructions incl preparation of surface complete all as specified and directed by Engineer-in-Charge. Note :- The water proofing treatment shall be got carried out by the manufactarer or their authorised applictor\"s duly approved by GE in writing. |
| 124 | Material for labour plain cement concrete 1:2:4 type B-1, (using 20 mm graded mechanically crushed stone aggregates) as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. |
| 125 | Material and labour for a coat of Heat resisting painting to Surfaces of any description wood, steel, iron, concrete, brick, stone, APP surface, etc., exceeding 10cm in width or girth incl preparation of APP surfaces complete all as specified and directed by Engr-in-charge |
| 126 | Material and labour for PCC 1:2:4 type B-0 (using 12.5 mm graded mechanical crushed aggregate) for benching, coving shall be 150 mm in radius mixed with acrylic based polymer water proofing compound, complete all as specified & directed by Engineer-in-Charge.(WPC shall be paid separately) |
| 127 | Dismantling timber scantling 40 Sq. cm and over in section, in any position of unframed/ framed work complete all as specified and as directed. |
| 128 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by the Engineer-in-Charge. |
| 129 | Material and labour Roof Trusses (framed) , trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engineer-in-Charge. |
| 130 | Material and labour rolled mild steel in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes incl. rivetting, welding etc complete all as specified and directed by Engineer-in-Charge. |
| 131 | Dismantelling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in any position complete all as specified and directed by Engineer-in-Charge. |
| 132 | Supply and fixing in Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directedby Engr-in-charge. |
| 133 | Supply and fixing inPre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directedby Engr-in-charge. |
| 134 | Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqmincluding both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, crossT of size 15 x32 mm of length 1200mmand secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm.galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws.The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 135 | Supply & fixing in repair Harrison rails, mild steel, chromium plated with fixing brackets,stops, rollers etc, complete all as specified and directed by Engineer-in-Charge. |
| 136 | Surface dressing not. exc 15cm deep and averaging 15cm deep in soft/loose soil & getting out including clearing all grass vegetation, saplings, shrubs, brush woods under growth roots and trees, complete all as specified and as directed. |
| 137 | Material and labour for broken bricks hard core of gauge exceeding 63mm but not exceeding 100mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and levelled in layer not exceeding 15cm thick watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge. |
| 138 | Material and labour for 100mm thick Cement concrete type D- 2,1:4:8 (40mm graded aggregate)as in foundation, sub base and mass concreteall as specified and directed |
| 139 | Material and labour for PCC 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as copings, bed plates, kerbs, benching, roof kerbs, on edge for sealing interlocking tiles and other bands and the like, finished the surface fair and even, including necessary form work etc complete all as specified and directed by Engineer-in-Charge. |
| 140 | Material and labour for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by the Engineer-in-Charge. |
| 141 | [E&M PORTION]Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. |
| 142 | Taking down Ceiling fan any size or any type and deposited to MES store yard complete all as specified and directed by Engineer-in-Charge. |
| 143 | Taking down Exhaustfan any size or any type and deposited to MES store yard complete all as specified and directed by Engineer-in-Charge. |
| 144 | Taking down old unserviceable single phase Electric Meter and deposited to MES Store Yardcomplete all as specified and directed by Engineer-in-Charge. |
| 145 | Taking down old and unserviceable submain wiring any size /type including earth wire complete with batten/conduit etc complete all as specified and directed by Engineer-in-Charge. |
| 146 | Fixing only exhaust fanand connecting up including provision of cable from ceiling rose/connector to fan, complete all as specified and directed by the Engineer-in-Charge. |
| 147 | Taking down old unserviceable SPN DB 8 WAY any of size/capacity complete all as specified and directed by Engineer-in-Charge. |
| 148 | Taking down old unserviceable MCB SPN/MCB SP of any size/capacity complete all as specified and directed by Engineer-in-Charge. |
| 149 | Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (Flame Retardant Low Smoke low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flushboxes made out of 1.2mm thick of any module from 2 to 18module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dollyincluding modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with SS screws and SS washers and making good the disturbedsurfaces as per existing for one light / fan / Bell point controlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (Flame Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed.NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately.2. All chases will be cut by chase cutter only. |
| 150 | Description all as per item No 150.00 here in before but for socket out let point 5 Amps on same board, complete all as specified and directed by the Engineer-in-Charge. |
| 151 | Description all as per item No 150.00 here in before but for socket out let point 5 Amps on independentboard, complete all as specified and directed by the Engineer-in-Charge. |
| 152 | Description all as per item No 150.00 here in before but for one bell point controlled by one bell push, complete all as specified and directed by the Engineer-in-Charge. |
| 153 | All as per srl item No 150.00 above but point wiring for one socket out let 15 & 5 Amps (independent) controlled by one switchwith using 2.5 Sq mm (nominal area) stranded copper conductor, complete all as specified and directed by the Engineer-in-Charge. |
| 154 | Supply and fixing modularswitch piano 6 Amps, flush type, single pole, one way,230 volt , AC supply, complete all as specified and directed by Engineer-in-Charge. |
| 155 | Supply and fixing modular switch piano 16 Amps, flush type, single pole, one way,230 volt , AC supply, complete all as specified and directed by Engineer-in-Charge. |
| 156 | Supply and fixing modularsocket outlet 3 pin 6 amps, 230 volts flush type , complete all as specified and directed by Engineer-in-Charge. |
| 157 | Supply and fixing modularsocket outlet6/16 amps, 3 pin combined 230 volts flush type , complete all as specified and directed by Engineer-in-Charge. |
| 158 | Supply and fixingmodularfan regulator/ step type one module/2 modules, 120W,50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and directed by Engineer-in-Charge. |
| 159 | Supply and fixingmodular switches , bell push, 6 Amps one module , 230V,50Hzs, supply complete all as specified and directed |
| 160 | Supply and fixing call bell ding dang /musical type single phase complete all as specified and directed by the Engineer-in-Charge. |
| 161 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed by Engineer-in-Charge. |
| 162 | Supply and fixing of LED light fitting 1x20W , 220-240V,not less than 100 lumen per watt, AC with aluminium housing with batten type with driver, with surge protection including connecting up with two core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specifid and directed. Note: LED cool white/warm white must get approved from engineer-in-charge. |
| 163 | Supply and fixing batten type withsurface mounted LED tube light fitting with high efficient diffuser mirror light 1x10Watt , with aluminium housingbody, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light complete all as specified and directed by Engineer-in-Charge.Note: LED cool white/warm white must get approved from engineer-in-charge. |
| 164 | Supply and fixing LED surface mounted bulk head luminaries 8-10W with min 800 lumen, industrial model IP65, aluminium housing , surgeprotection including driver &LED etc complete with all accessories connecting with copper conductorflexiable cable from celing rose to connector of the light complete all as specified and directed by Engineer-in-Charge. |
| 165 | Supply and fixing LEDBldg security light fitting of capacity 35-45 Watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safty input voltage range 170 to 270 volts, with IP66 protection and other connected accessories including service bracket of MS pipe 40mm bore of length 0.09 mtr with MS clamps, bolts, nuts and washers and suitable reducer for connecting to MS pipe as required at site and making electrical connection complete all as specified and directed by Engineer-in-Charge. |
| 166 | Supply and fixingSingle Pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCBof capacity 20 Amps, complete all as specified and directed by the Engineer-in-Charge. |
| 167 | Material and labour for sub main wiring with two single core FRLSH PVCinsulatedunsheathed copper conductor cable 4.0 sq mm drawnin and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories onwall or ceiling withone additional PVC insulated , strandedcopper conductor FRLSH of 4.0 sqmm,green colourfor earthcontinuity conductor including including taking down old unserviceable sub main wiringand making good the disturbed surface complete all as specified and directed by Engineer-in-Charge. |
| 168 | Supply , insatallation, testingofSPN distibution board 8way,double door , IP 43 , as per IS 8623including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles,complete all as specified and directed by Engineer-in-Charge. |
| 169 | Supply and fixing MCB SP single pole, 240 volts, 50 Hz, breaking capacity , 6 to 32 Amps, complete all as specified and directed by Engineer-in-Charge. |
| 170 | Supply and fixing SPN 40 -63 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA completeall as specified and directed. |
| 171 | Taking out old unserviceable earthing and material & labour for earthing with Galvanised Steel earth plate electrode 60cmx 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by usingGI earth lead wire 4MM dia(upto terminal point) by means ofbolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 20 mm diaGI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6)type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type ofsoil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 ofSSR 1991(Part-I) complete all as specified and as directed by Engineer-in-charge. Note : The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to beincluding in quoted rates. |
| 172 | Material and labourfor re-fixing single phase electric meter any type and any capacity with all accessories with making all connection complete all as specified and directed |
| 173 | Hanging only ceiling fans and connecting up including provision of cable from ceiling rose or connector toceiling fan including cleaning and minor repair and replacement of split pin , hook and rod/pipe of required length with fixing arrangement etc completeall as specified and directed by Engineer-in-Charge |
| 174 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and as directed by engineer in charge. |
| 175 | NOTE:- Amount of credit ofRs. 1,00,735.70 for retrieved materials is mentioned in Schedule of Credit Page No 24.00 & 25.00 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
