|
| 1 | Renovation of Office space for Studio at Bisag-N Office, Ground floor MeitY, New Delhi. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead |
| 4 | Of area 3 sq. metres and below |
| 5 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineerin-charge. |
| 6 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 20 km for all lifts, complete as per directions of Engineer-in-charg |
| 7 | UP TO 20 KM D |
| 8 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead |
| 9 | For thickness of tiles 10 mm to 25 mm |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level (Cement mortar 1:4 (1 cement :4 coarse sand)) |
| 13 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 14 | Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry |
| 15 | 15 mm cement plaster on the rough side of single or half brick wall of mixwith cement and Fine sand- 1:4 (1 cement: 4 Fine sand) |
| 16 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre ofapproved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 17 | Two coats |
| 18 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) |
| 19 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:) |
| 20 | With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 21 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) |
| 22 | Second class teak wood |
| 23 | Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge |
| 24 | Providing and fixing specified wood frame work consisting of battens 50x25 mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete |
| 25 | (Kiln seasoned and chemically treated hollock wood) |
| 26 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1.The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2.Applying two coats of sealer with pray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3.On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a lightwet rubbing is done this surface is further allowed to dry for 12 hrs. 4.On this, 1st coat of melamine polish is applied with spray gun usingmelamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 28 | 25 mm nominal dia Pipes |
| 29 | 32mm nominal dia Pipes |
| 30 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 31 | group c |
| 32 | Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.e |
| 33 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 34 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Component Add Modular switch |
| 35 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 36 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 37 | 2 X 1.5 sq. mm +1 X 1.5 sq. mm earth wire |
| 38 | 2 X 2.5 sq. mm+1X2.5 sq. mm earth wire |
| 39 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. |
| 40 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 41 | 4 X 6 sq. mm +2 X 6 sq. mm earth wire |
| 42 | 4 X 10 sq. mm +2 X 6 sq. mm earth wire |
| 43 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 44 | 4 way (4 + 12), Double door |
| 45 | 6 way (4 + 18), Double door |
| 46 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 47 | Single pole and neutral |
| 48 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 49 | 40 A |
| 50 | 63 A |
| 51 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. (Set) |
| 52 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) |
| 53 | LED Panellight 2x2ft., (System lumen efficacy>135 lm/Watt) Supplying, installation, Testing & Commissioning of Panellight 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirementwith Driverefficiency >85%, Operating voltage AC140-270 Volt,frequency50/60hz,Operatingtemprange-50Cto40 0C,internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95,IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free,(flicker should be below 5 %), life time (LED, Driver & electrical circuitry),of minimum50000 Burning Hours with , 70% of initial Lumenmaintained tilllife ends ,CCT 3000°K /4000°K /5700°K /6500°K(As perANSI Bin), SDCM (Standard Deviation Colour Matching) <3,Maximumpower consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen |
| 54 | printing on housing. complete inallrespecti/c external connectionswith1.5sq.mm FRLS/HFFR, PVC insulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy>135lm/Watt output . LM79 & LM80 Test report andalltestingrequiredforLED fixtures as per BISshall be submitted. Shape size and CCT shall be as approved by Engineer-inCharge as per requirement. (Thermal management:heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powdercoateddiecast/Extruded aluminiumBody (Thickness > 1.20 mm) |
| 55 | 36 watt |
| 56 | LED Batten light (System lumen efficacy ≥105 <120 lm/Watt). Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body materialand construction as per IS : 10322 withdriver (Replaceable)as per the requirement with Driver efficiency >85%, Operating voltage AC 140270 Volt,frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20,CRI>80, Flicker free, (flickershould be below 5 %), life time (LED, Driver & electrical circuitry), ofminimum 50000BurningHourswith70%ofinitial Lumenmaintained tilllifeends, CCT3000°K/ 4000°K / 5700°K/6500°K(AsperANSIBin), SDCM (Standard Deviation , |
| 57 | 18-22 Watt |
| 58 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor. room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 5.0 suitable to operate on 250V, 50 Hz. A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position in provided recess with wooden frame complete specification no. AP-AC/SAC |
| 59 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid |
| 60 | Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid |
| 61 | P/L Antistatic Laminated (600x600x18mm) floor tiles (Raised floor) over adjustable zinc coated M.S. jack pedestals fixed over epoxy pedestal adhesives, including necessary edging, cutting, providing suction pad, etc. complete as per manufacturers specifications. (Hewitson - INT 600) in UPS/Electrical room. |
| 62 | Rised Flooring (600X600X18 MM) |
| 63 | Supplying and fixing 20 A, Moduler type socket/switch outlet, with 2 pole and earth, on face or in recess, socket out let and complete with Switches, testing and commissioning etc. an required |
| 64 | 103-32A MCB |
| 65 | Supplying and fixing of MS Outdoor Unit (ODU) Stand suitable for 2 Ton Split AC, made of 40x40x5 mm MS angle, painted with two coats of anti-rust primer and one coat of enamel paint, including all required nuts, bolts, washers, and wall anchor fasteners, complete in all respects. |
| 66 | Control & Transmission Wiring Supply, Installation, Testing and Commissioning of control cum transmission wiring of 2 corex 1.25 sq mm copper wire in suitable PVC |
| 67 | Providing and fixing of 9mm thik Eco Board acoustic panel of approved make and color to be fixed with necessary adhesives on 12 mm ply pasted on wall existing partition / wall surfaces as per details provided in the drawings fixed over existing surfaces. Wooden level adjusters shall be used in case of any imperfections in the wall surface. Quoted rates shall include all operations as specified above at all heights and levels, making openings / cutouts for Electrical fixtures, HVAC etc including all tools and hardware all complete as per drawings and as directed by the Engineer-in-charge Composition: 100% PET (60% Recycled) with adhesive backingCategory: PanelsDimensions: 1220x2440mm (+/-2mm)Thickness: 9mm (+/-7%)Sound Absorption: 0.70 NRC (No Air Gap |
| 68 | Providing and fixing Armstrong make Ceiling Acoustic Sound Scape Shapes made of glass fiber acoustic panels of required shapes and sizes, having NRC (Noise Reduction Coefficient) minimum 0.90, suspended with suitable hanging arrangement including necessary frame, suspension system, anchor fasteners, and all complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 69 | Commercial Ply base without frame of make kit/century/duro. |
| 70 | 12 mm thick |
| 71 | 18 mm thick |
| 72 | Providing, fabricating and installing in specified position PCR Console table for studio table in having size of 1200mm x 750mm x 750mm using 19mm, 12mm and 6mm the approved make Boiling water proof(BWP) marine ply and 1mm thick laminate as per drawings with 50mmx50mm 2nd class Indian teak Wood round nosing at front including 2mm P. V. C. hot pressed embossed lipping of matching/approved colour and 3 or more coats of French polish for matching approved colour on all underside and unlaminated areas, Metal key board trays and 2 cable organizer of approved make to be installed as per ref, drawing. Drawers padestal attached or free standing as per choice. Each shutter to have \"piano Hinge Insets\" and ball catch of approved make and to have round \"Multi purpose lock\" & \"Plinth ittings\" and/or \"Plinth screws\", 85x25mm 304 grade Stainless steel Heavy duty \"D\" Handle and including all the required hardware and accessories to be installed as per Engineer\"s selection. |
| 73 | Providing, fabricating and installing in specified position table for studio in having size of 3050mm x 750mm x 750mm using 19mm, 12mm and 6mm thk approved make Boiling water proof(BWP) marine ply and 1mm thick laminate as per drawings with 50mmx50mm 2nd class Indian teak Wood round nosing at front including 2mm P. V. C. hot pressed embossed lipping of matching / approved colour and 3 or more coats of French polish for matching approved colour on all underside and unlaminated areas, Metal key board trays and 2\"cable organizer of approved make to be installed as per ref. drawing. Drawers to run on Telescopic Side Mounting drawer slides 500mm x 50mm all to be installed as per the drawing and design. Each shutter to have \"piano Hinge Insets\" and ball catch of approved make and to have round \"Multi purpose lock\" & \"Plinth fittings\" and / or \"Plinth screws\" 85x25mm 304 grade Stainless steel Heavy duty \"D\" Handle and including all the required hardware and accessories to be installed as per Engineer\"s selection. |
| 74 | Providing, fabricating and installing in specified position table for studio in having size of 900mm x 750mm x 750mm using 19mm, 12mm and 6mm thk approved make Boiling water proof(BWP) marine ply and 1mm thick laminate as per drawings with 50mmx50mm 2nd class Indian teak Wood round nosing at front including 2mm P. V. C. hot pressed embossed lipping of matching / approved colour and 3 or more coats of French polish for matching approved colour on all underside and unlaminated areas, Metal key board trays and 2\"cable organizer of approved make to be installed as per ref. drawing. Drawers to run on Telescopic Side Mounting drawer slides 500mm x 50mm all to be installed as per the drawing and design. Each shutter to have \"piano Hinge Insets\" and ball catch of approved make and to have round \"Multi purpose lock\" & \"Plinth fittings\" and / or \"Plinth screws\" 85x25mm 304 grade Stainless steel Heavy duty \"D\" Handle and including all the required hardware and accessories to be installed as per Engineer\"s selection. |
| 75 | Supplying and fixing GREEN CURTAIN with fabric of first quality, approved shade and colour, manufactured by REPUTED VENDOR etc complete all as specified and directed by Officer in charge. Note: a) Rate quoted for the item deemed to include for wastages. b) Window area shall be considered for payment.c) Basic cost of fabric shall not be less than Rs 180 Sft. |
| 76 | Providing and fixing the position of the Studio room chairs.The seat is made up of 1.4 plus/minus 0.1 cm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. SEAT SIZE: 48cm(W) * 51cm(D) The Back is injection moulded in Glass filled Polypropylene which is upholstered with Mesh fabric. The back consist of fixed lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.4 plus/minus 0.02 cm.BACK SIZE: 44.0 cm(W) * 51.5 cm(H). The polyurethane foam for seat is of density = 30 ± 3 kg/m3. The Fixed armrest is made of injection moulded Polypropylene which is connecting seat and backThe mechanism is designed with the following features: 360° revolving type. Centre Tilt. Tilt with upright lock. The pneumatic height adjustment has a stroke of 9.5 plus/minus 0.5 * cm The pedestal is injection moulded Polyamide and fitted with 5 nos.twin wheel castors. The pedestal is 60 plus/minus 0.5 cm P.C.D. The twin wheel castors are injection moulded in black Polyamide having 5.0± 0.1cm wheel Diametercomplete as per design, drawing and as per specifications. |
| 77 | Supply, installation, and commissioning of high-speed dual-band Wi-Fi router along with required access points/repeaters for full coverage, including laying of CAT6/CAT6A LAN cables with conduits, trunking, RJ45 connectors, faceplates, patch panels, and labeling; installation of network switch, connection of power adapters, stabilizer, and UPS (if required); application of protective coating/finishing on exposed conduits and cable trays as required; configuration of router and access points with SSID, password, and security settings; testing of connectivity, speed, and coverage at all points; preparation of network diagram, device inventory, configuration details, and provision of basic user training; complete execution of all materials, labor, coating, and accessories required for proper functioning of the Wi-Fi network as per standard safety practices, and final handover to client. (Non-Schedule Item) |
| 78 | The Consultant shall prepare all required drawings, including detailed layout plans, sectional details, 2D/3D views (wherever required) and any other design/documentation as directed by the Engineer-in-Charge / Client from time to time. A lump sum fee @ 1% of the estimated cost put to tender shall be payable by the Contractor to the Consultant, and the same shall be deemed to be included within the Contractor’s quoted rates. Proof of such payment to the Consultant shall be submitted by the Contractor along with his running/final bill before completion of work. |
