|
| 1 | Supply of Hardware Items |
| 2 | SS Square tube (50 x 50 mm, SS 304 Grade, 6m length, 16 gauge) |
| 3 | SS Rectangle tube (50 x 40 mm, SS 304 Grade, 6m length, 16 gauge) |
| 4 | SS Square tube(25 x 25 mm, SS 304 Grade, 6m length, 16 gauge) |
| 5 | SS Square tube(20 x 20 mm, SS 304 Grade, 6m length, 16 gauge) |
| 6 | SS Sheet (Size: 8 x 4 Feet, 18 Gauge, SS 304 Grade) |
| 7 | SS Bush Hinges(120x40 mm, with shaft, SS 304 Grade, Cylindrical type) |
| 8 | S.S 360 Degree Swivel Gate V-Groove Wheel(Wheel Dia: 3 Inches, Groove Width: 20-22 mm, Bearing Type,SS 304 Grade) |
| 9 | MS C channel 4 inches, 6 m length, Heavy duty, (100 x 50x 5 mm) Thickness, |
| 10 | SS Round Bar(20 mm, 6 m length, SS 304 Grade) |
| 11 | SS Square tube100x100mm, 12 Gauge, 6 m length, Heavy duty, SS 304 Grade) |
| 12 | Teflon Bush roller with SS bracket(100 x 50 mm) |
| 13 | SS Welding rod (Size: 2.5 mm, E308L-16) |
| 14 | MS Welding rod( Size: 2.5 mm, E6013) |
| 15 | Metal Cutting Wheel (14 inches) |
| 16 | Metal Cutting Wheel (4 inch, Internal Diameter: 16mm, good quality) |
| 17 | Metal Grinding Wheel (Grain Size: 60, Dia: 4 inch) |
| 18 | SS Flap Grinding Wheel(100x6.5x16 mm, 60 grade) |
| 19 | SS Grinding Wheel AG7 (100x6.5x16 mm, 80 grade) |
| 20 | SS Paper Grinding Wheel (100x6.5x16 mm, 120 grade) |
| 21 | SS Buffing Wheel( Cotton Stitched polishing wheel, 04 inches) |
| 22 | SS Polish Bar (Soap)( Green Bar) |
| 23 | Zinc rich cold galvanizing spray (90% zinc and foam and durable self healing grade 3060, 493ml) |
| 24 | Primer (Red Oxide Metal Primer) |
| 25 | G.I Pipe( Diameter: 2 inches, Grade: Medium) |
| 26 | G.I Pipe (Diameter: 1.5 inches, Grade: Medium) |
| 27 | G.I Plain Tee( Diameter: 2 inches, without thread, heavy duty) |
| 28 | G.I Plain flange (Diameter: 2 inches, without thread, heavy duty) |
| 29 | Rubber gasket (4 mm) |
| 30 | M.S Heavy duty Socket (0.5 inches) |
| 31 | Universal heavy duty foam fountain jetnozzle (1 inch ) |
| 32 | S.S Flat head hexagonal nut bolt withwasher(Diameter: 0.5 inch, Length: 1.5 inch, 304 grade, with doublewasher, heavy duty) |
| 33 | S.S Nut bolt with double washer( Diameter:1/4 inch, Length: 1 inch, 304 grade, with doublewasher, heavy duty) |
| 34 | Hexagonal Brass rod (32 mm diameter, 1 meter length) |
| 35 | S.S Nipple (1.5 inch X 3 inch long) |
| 36 | S.S Nipple(2 inch X 3 inch long) |
| 37 | S.S Nipple(1 inch X 3 inch long) |
| 38 | S.S Ball valve(1 inch, 304 grade) |
| 39 | GM/Brass Ball Valve(1.5 inch, heavy duty) |
| 40 | GM/Brass Ball Valve(2 inch, heavy duty ) |
| 41 | Teflon tape(Width: 0.5 inch) |
| 42 | Epoxy Paint with hardener(Colour: Smoke Grey, Made of two components base andhardener) |
| 43 | G.I Union Socket(1.5 inch, Grade: Heavy) |
| 44 | S.S Strip(20 x 3 mm) |
| 45 | S.S Ball Valve(3/4 inch, heavy duty) |
| 46 | Metal Grinding Wheel(4 inch, Internal Diameter:16mm, good quality) |
| 47 | S.S Grinding Wheel(Grade 60, 4 inch diameter, Internal Diameter:16mm) |
| 48 | S.S Paper Grinding Wheel(Grade 100, 4 inch diameter, Internal Diameter: hole 16 mm) |
| 49 | Water Emery paper(150 No.) |
| 50 | Cable Tie(200 mm (100 nos. pkt)) |
| 51 | Zinc primer with hardener(Standard) |
| 52 | Flexible Drain Pipe(Diameter : 3 inches, PVC) |
| 53 | Epoxy Paint with hardener(Colour: White, Made of two components base and hardener) |
| 54 | Epoxy Paint with hardener(Colour: Red, Made of two components base and hardener) |
| 55 | Epoxy Paint with hardener(Colour: Dark Blue, Made of two components base andhardener) |
| 56 | Epoxy Paint with hardener(Colour: Black, Made of two components base and hardener) |
| 57 | Epoxy Zinc Phosphate Primer(Air Drying, High Performance, Anti-corrosion, Zinc Phosphatesuspended in an Epoxy Matrix) |
| 58 | NC Thinner(1 Litre Bottle) |
| 59 | Paint brush(2 inch) |
| 60 | Paint brush(4 inch) |
| 61 | Sand paper(0.5mm (230 × 280 mm), P800 ) |
| 62 | Stainless Steel Sheet(Flat sheet, Thickness: 12 Guage or 2mm, Size: 8 x 4 feet,Grade: 304) |
| 63 | Dendrite (Adhesive) (50 ml.) |
