Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantlingof brick tiles single layer as in roofcovering complete all as specified |
| 2 | Demolition of mud in roofs any thicknessincludingplastering and leeping (whether full thickness removed or only a part thereof) including cleaning the surfaces with wire brushes and water jets all as specified. |
| 3 | M & L brushing neat cement slurry with 3kg of cement per sqm complete all as specified |
| 4 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 5 | M&L, for cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in coping and roof kerbs on roof chamfered on edge incl troweling slightly complete all as specified and directed. |
| 6 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stillgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately. |
| 7 | Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. |
| 8 | Providing and applying liquid Polyurea-PU based hybrid elastomeric water proofing membrane (incl fibre mesh) at existing/newly constructed roofs, RCC structure like basement raft, retaining wall, water retaining structure, tunnels/subways and bridge deck etc. in two or more coats.The product must have pot life of >90 mins., tensile strength > 12.6 Mpa, elongation of > 500% conforming to ASTM D 2370 & puncture resistance of >200 N as per ASTM E 154 with min. consumption of 1.5 Kg per sqm for 1.2mm DFT in two- three coats.The surface needs to be primed with water soluble self impregnated epoxy primer in two coats to be applied @ 200-250 gms/sqm/coat prior to Polyurea -PU application.Furthermor, (in case the substrate is not suitable) 15mm plaster is advisable for surface prepration before application of the water proofing membrane to avoid pinholes or functional difficulties of the system (Make - Berger STP) Note:- The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm. |
| 9 | M & L 40mm thick Brick tiles laid on bedding layer of CM 1;3 15mm thick andjoints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over APP membrane complete all as specified and directed. |
| 10 | DittoBut except tiles |
| 11 | M & L flush pointingin CM 1:3 to brick tiles laid flat in roof or paving incuding raking out joints complete all as specified and directed. |
| 12 | Taking up or down existing steel 15 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 13 | Taking up or down existing steel 20 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 14 | Supplying and fixing, 15 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall (including cutting chases for concealing the GI pipe and making good complete) or laid in floor complete all as specified and as directed |
| 15 | Supplying and fixing, 20 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall (including cutting chases for concealing the GI pipe and making good complete) or laid in floor complete all as specified and as directed |
| 16 | Dismantling of water tanks (PVC/RCC of any description) n exc 500 ltr capacity and removing from site complete all as specified and as directed |
| 17 | Supply, hoist and fix in position; 500 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered complete all as specified. |
| 18 | S&F20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed |
| 19 | S & F in repair 20 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 20 | S & F in repair 15 mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 21 | Taking down cement plaster of any descriptionany thickness /dado/Skirting/ including raking out joints hacking for key scrubbing down with water all as specified. |
| 22 | Demolition of brick work built in cement mortar incl all quions, arches pillars etc but excluding precast concrete articles all as specified. |
| 23 | M&L for brick work with sub class \"B\" old size bricks straight or curved on plan to anyradius with old sizebrick thick walls built in cement mortar 1:6 all as specified. |
| 24 | M&L for brick workin half brick thick walls built in cementmortar (1:4)using sub class ‘B’ old size bricks, straight or curved on plan to any radius complete all as specified. |
| 25 | M&L for Rendering 15 mm thick cement mortar 1:6 on brick or concretesurface finished even and smooth without using extra cement all as specified |
| 26 | M&L for preparing surfaces new plasteredsurfaces of walls by applying two coats of oil bounddistemper (Manually) over a coat of wall care putty on plastered surface preparatory to distempering complete all as specified. |
| 27 | Complete removal of existing treatmentof wall surfaces applyingtwo coat of oil bounddistempering(Manually) over one coat JK Birla putty all as specified and directed by Engr-in-Charge. |
| 28 | M&L for 15 mm thick cement mortar 1:4 on brick or concretesurface finished even and smooth without using extra cement all as specified |
| 29 | M&L forpreparing new plastered or unplastered wall surfaces and applied two coat of cement base paint over one priming coat all as specified and directed by Engr-in-charge. |
| 30 | M&L forcomplete removal of existing treatments on wall surfaces and appliedtwo coat of cement base paintover one coat of primer all as specified and directed by Engr-in-charge. |
| 31 | M&L rendering 5mm thick in cement mortar (1:3) under ceilings or concrete surfaces finished even and smooth without using extra cement as on ceiling complete all as specified |
| 32 | M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash etc. complete all as specified and directed |
| 33 | M & L for preparation of Old plastered surfaces of ceilings and applying two coats of white wash etc. complete all as specified and directed |
| 34 | M&L for repairing of RCC projections, chajjias, roofs, facia etc by necessary preparation. Scrapping, cutting, chiseling derusting and cleaning exposed reinforcement and grouting surfaces of damaged R.,C.C surfaces/patches with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggrigates over a coat of cement slurry and reinforcement with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 70mm including necessary form work at heights between 2 mtrs to 10 mtrs complete all as specified and directed by Engr-in-charge. |
| 35 | Dismantlingfloor hearth or wall tilingincludingcement mortar bedding ( but not backing)anddisposal of rubbish outside MD land complete all as specified |
| 36 | Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) |
| 37 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding under floor finishes complete all as specified and as directed. |
| 38 | S&F glazed ceramic tiles 350mmx250mm/450x350x7mm thick as on vertical surfaces viz dados, skirtings etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour of tiles over and including rendering 10 mm thick cement mortar (1:4) complete all as specified and as directed. |
| 39 | M&L Non skid Coloured ceramic tiles 7 to 8 mm thick (square or rectangle) area of each tile exce 0.11 SqM but not exceeding 0.18 SqMinfloors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with including screed bed in CM 1:4, 20 mm thick for laying floor tiles, haucking oldconcrete surfaces and applying cement slurry 3.0 kg per Sqm. |
| 40 | M&L for Joint free non-skid ceramic colouredtiles 7 to 8mm thickarea of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (600 x 600mm) in floors set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl 15mm thick bedding layer CM 1:6complete all as specified. |
| 41 | M&L for non-skid ceramic colouredtiles 7 to 8mm thickarea of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm (600 x 600mm) in Skirtings set and jointed in neat cement slurry and pointed in white or colored cement to match over and incl10mm thick backing coat layer CM 1:4complete all as specified. |
| 42 | M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate ) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as spd and directed. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3 metre in length. Joint gap between adjoining slab, at corners and at junctions ofwalls shallnot exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls. |
| 43 | Taking down chowkhats or frame with shutter (without taking off shutter from the frames)area not exc 1.5 Sqm each all as specified. |
| 44 | Taking down chowkhats or frame with shutter (without taking off shutter from the frames)areaexc 1.5 Sqm but n exc 4.00 sqm each all as specified. |
| 45 | Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mmand 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07.Note: Wire mesh and painting shall be measured & paid separately under respective item of schedule. |
| 46 | Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged skeleton shutter ERW sec 50mmx20mmand 1mm thick with two openable leaf consisting two Nos sash bars of T-section 20mmx3mm complete welded to frame with one verticle mulion of ERW box type T-section of size 60mmx25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four Nos for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window. (b) Handle of z section 20mmx25mm, 100mm long 01 Nos per leaf (c) MS tower bolt 150mm long-2 Nos per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 Nos per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07.Note: Glass pans and painting shall be measured & paid separately under respective item of schedule. |
| 47 | Steel ventilator with top hung shutter including hinges, steel peg stay, complete (For glazing only) |
| 48 | M&Lfor Preparing and applying one coat of red oxide primer andtwo coats of synthetic enamel paint over new steelSurfaces of any description, over 10cm in width or girth |
| 49 | M&Lpreparing old steel surfaces andapplying one coat oif synthetic enamel paint over steelSurfaces of any description, over 10cm in width or girth |
| 50 | M&L for sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane (Including hacking out if necessary). |
| 51 | S&F galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanized wire staples complete all as specified as directed. |
| 52 | S&F framed work such as MS grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165 |
| 53 | S/F PVC solid door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, supplying and fixing in opening as per specification and drawing. |
| 54 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out ofM.S.Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame at the site as per specification & drawing. |
| 55 | Mild steel conforming to Fe 290, Gde E-165 framed work as in door frames, chowkhats including necessary cutting, welding, bending, drilling etc., complete all as specified and directed. |
| 56 | S&F35 mm Factory made 2nd class hardwood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated. |
| 57 | S&F 2nd class hardwood 30 mm thick Glazed andskeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars),edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified inSSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkats |
| 58 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete. |
| 59 | S&F Floor door stopper of aluminium alloy body and tongue with cover plate length 140 mm , anodised, with hard drawn steel spring, fixed in floor all as specified and directed. |
| 60 | M&L for preparation of newwood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint in any tint all as specified and directed by the Engr in Charge. |
| 61 | Supply & Fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate |
| 62 | S&F Aluminum anodized barrel tower boltof extruded section of size 150mm |
| 63 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete |
| 64 | S&Fextruded Aluminum alloy handle fabricated of size 150mm complete. |
| 65 | S&F in repairs 15mm angular stop valves, fancy type chromium plated, with long shank and cup (concealed) screwed down, high pressure with crutch or butter fly handlescrewed both endsforiron pipe or for unionsand fixed. Make: Cera/Shakti/Prayag |
| 66 | S&F in repairs Chromium plated shower rose with 450 mm long brass CP pipe with or without swivel joints, any size, including fixing to steel pipe or union15 mm bore. Make: Cera/Shakti/Prayag |
| 67 | S&F in repairs 15mm angular stop valves, fancy type chromium plated, with long shank and cup screwed down, high pressure with crutch or butter fly handlescrewed both endsforiron pipe or for unionsand fixed. Make: Cera/Shakti/Prayag |
| 68 | S&F in repairs Bib tap fancy typecast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete fixed in repairs. |
| 69 | S&F in replacement PVC connection 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed. |
| 70 | Demolition and breaking up drain pipesAC/PVC pipe in event n.exc 150 mm dia including all fittings. |
| 71 | S & F 110 mm bore PVC (SWR) pipe of pressure rating 6kgf/cm2 single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed. Make : Prince /Supreme |
| 72 | S&F 110mm bore PVC (SWR) bends in any radius complete all as specified and directed. Make : Prince /Supreme |
| 73 | S&F PVC (SWR) junction single (single tee)equal or unequal, dia of pipe 110 mm completeall as specified and directed. |
| 74 | S&F Vitreous china wash hand basin (Oval shape) under counter type bowl type including waste coupling and pipe all as specifed and directed. Make: Parryware. |
| 75 | S&F vitreous china ware squatting pan ‘Orissa’ pattern size 580x440mm white with integral foot rest including connection to trap and flushing pipe, anti-syphonage pipe and suitable trap etc and making good to floor etc complete all as specified and as directed. |
| 76 | S&F in repair 10 litres capacity PVC valve less symphonic action type,flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified. |
| 77 | S&F in repairs brass chromium plated towel rail 20 mm dia, 600mm long fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed. |
| 78 | S&F looking mirrorsize 600x450mm of selected quality fixed on wall with ,aluminum frame5.5mm thick etc. back side Acrylic sheet |
| 79 | S&F in repairs pillar taps, cast copper alloy with capstan heads chrominm plated fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, srewed for iron pipe and fixed 15mm bore. Make: Cera/Prayag/Shakti |
| 80 | S&F in repairs Soap dish, any type, fixed to plugs with screws and PVC rawl plugs complete all as specified and directed. |
| 81 | Supply and fixing in repairs chromium plated grating 100 mm dia circular, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed. |
| 82 | Material and labour for 25mm dia Stainless steel pipe curtain rod, powder coatedfixed with & includingSS hooks/ brackets and SS decorative finials (at both side), shade as approved by GE complete all as specified includng fixing of long size rawl plugs in wall for SS hook complete all as specified and directed. |
| 83 | Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. |
| 84 | M&L (Nominal Mix) RCC 1:2:4 type B-1 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelvesand the like complete all as specified and directed. |
| 85 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves , landing and similar work not exceeding 200 mm thick (horzontal or sloping) and to edges of concrete complete all as specified and directed. |
| 86 | M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15mm thick screed bed in cm 1:4 complete all as specified and directed. |
| 87 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/ lose soil. |
| 88 | M&L 75 mm thick cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate. |
| 89 | M & L for 25mm thick Sand cushening under paver block complete all as specified and directed. |
| 90 | M&L machine pressed precast coloured concrete coloured interlocking paver blocksany shape and size confirming of IS 15658: 2006 of 60mm thick , M-35 laid and jointed with grey cement and pigment. |
| 91 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for manhole, laying of UG cable etc n. exc. 10 sqm on plan and n. exc. 1.5M in depth and getting out in any type of soil complete all as specified and as directed. |
| 92 | Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed size of pipe 100 mm dia |
| 93 | Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed size of pipe 150 mm dia |
| 94 | M & L 100 mm internal dia of pipe cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate. |
| 95 | M & L 150 mm internal dia of pipe cement concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate. |
| 96 | M&L precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes/Septic tank/Soakage well etc set in cement mortar 1:6 including necessary form work complete all as specified and directed |
| 97 | S&F TMT steel bars10 mm dia and abovecut to length bent to shape, required including cranking benchings spirally hooping for colums hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia |
| 98 | M&L for Mild steel TMT bars6mm to 8mm dia and over cut to length , bent to shape required, including cranking bending and binding with annealed wire not less than 0.9 mm dia complete. |
| 99 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft loose soil complete all as specified and directed |
| 100 | Removing excavated soil material exc. 1.50 km but n exc. 5 km anddepositing where directed from the starting point. |
| 101 | M&L RCC (Nominal mix) 1:2:4 type B1 (Nominal mix) (using 20mm graded stone aggregate) as in foundation, plinth beams,bases for columns, etc and mass concreting |
| 102 | M&L RCC (Nominal mix) 1:2:4 type B1 (Nominal mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5mtr span. |
| 103 | M&L RCC (Nominal mix) 1:2:4 type B1 (Nominal mix) (using 20mm graded stone aggregate) in Columns, pillars, piers,posts and struts complete . |
| 104 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc for rough finished flat surfaces of concrete. |
| 105 | Formwork to sides and soffits of floor or roof beams, beam hauncnings, bressummers, lintels, cantilevers, shelves incl supports, overhangs etc, also splays betweens floors and beams etc for rough finished flat surfaces of concrete. |
| 106 | M&L Formwork torough finished flat surfaces of sides of pillars,posts, struts, piers, columns and stanchions square or rectangular on section complete. |
| 107 | Mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete. |
| 108 | Mild steel TMT bars 5mm dia over and upto 10mm as in stirrups for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete. |
| 109 | M&LCement concrete type D 2, 1:4:8 (using 40 mm gradedstone aggregate) in sub base of flooring, hard standing,Manhole, drain etc. |
| 110 | M&LVitrified Ceramic tiles(Double charged) 10 mm thick Square/rectangular) polished, area of each tilesexceeding 0.36 sqm but not exceeding 0.42 sqm, in floorsetc. set and jointed in neat cement slurry and pointed inwhite or coloured cement tomatch the colour of the tiles over and including 15 mm thick screed be in CM 1:6 complete. |
| 111 | All as per item No 110above but on vertical surfaces such as skiting dado, riser etc over and incl 10 mm thick cement plaster in CM 1:4 rough finished surface to receive tiles |
| 112 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mm |
| 113 | S&F Anodised aluminium frame for doors,windows, partitions ,ventilatorswith one or more rebatesincluding joining cleat for fixing etc completeall asspecified. |
| 114 | S&F Anodised aluminium window and ventilator shutters, (Sliding type) without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 115 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 116 | S&F Aluminium composite sheet panels 4mm thickincluding necessary joining cleats, glazing clips, rubber neoprene packing, for fillingg in frames of partitions and doors including all necessary fittings etc. complete all as specified. |
| 117 | S&Fsheet glass 4.8 mm thick ordinary quality to be fixed in Al frame work in square exc 0.5 sqm in each pane |
| 118 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 119 | S & F for4 mm thick of size 600x600mmHPSC (high pressure Steam Cured) pre-primetered self embossed, textured designer boardE-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick, cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mmduly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixturescomplete all as specified and as directed. |
| 120 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point as specified and directed |
| 121 | S&F formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 122 | M&L for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and as directed. |
| 123 | S&F CP Brass Bib tap fancy typecast copper alloy suitable for 15mm bore iron pipe with long body fancy typecomplete all as specified. |
| 124 | S & F 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed. |
| 125 | S&F Brass chromium plated tubular tower rail20mm dia , D type, 60cm longbetween flanges complete |
| 126 | S&F Glass corner shelf including CP railing, radius 250mm complete all as specified and directed. |
| 127 | S&F Brass CP Soap dish, any type, fixed to plugs with chromium plated brass screws all as specified and directed. |
| 128 | Supply and fixing in replacement chromium plated grating 125mm dia circular fixing with cement mortar 1:3 on nahani trap/floor trap complete all as specified and directed. |
| 129 | M&L concrete bed in PCC 1:3:6type C2(using 40mm graded stone aggregate) as in bedding for drain pipes including packing under and haunching againts the sides of pipes after they are laid and tested for 150mm bore pipecomplete all as specified and directed. |
| 130 | M&L for precast re-inforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) as in manhole covers including all form work and set in cm 1:4complete all as specified and shown on drgs. |
| 131 | Cutting in to existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete1:2:4type B-1 smooth finished, and reforming benching as required, internal dia of pipe 200 mm complete all as specified and directed. |
| 132 | M&L Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard dense soil. |
| 133 | M & L for PCC (1:2:4) type B-0 (using 12.50 mm graded crushed stone aggregates) lean concrete as in foundation, filling and mass concrete of post complete all as specified. |
| 134 | S&F rolled sections as in main and cross beams,hip and jack rafters,purlinswhere connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates. confirming to grade Fe-410-W complete all as specified and directed by EIC. |
| 135 | S&F pre-painted galvatume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of colour (as approved by users) having tensile strength of 550 Mpa as in roof covering/cladding to walls,fixed with self tapping screws as specified. |
| 136 | Supply and fixing at site super heavy hollow PVC wall panelling consisting of 5mm thick colour PVC sheet including PVC accessory of U+L and solvent cement and fixing on wall as per specification including dismantling old/unsv wall panelling. |
| 137 | M&L preparation of old decorated surface of wall and applying onecoat of cement base paint complete all as specified and as directed by Engineer-in-Charge. |
| 138 | M & L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed. |
| 139 | M & L for preparation of old decorated plastered or unplastered surfaces and apply one coat of white wash on walls including cornices etc all as specified and directed |
| 140 | M&L for preparation of old surfaces of ceiling including complete removal scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (plastered or unplastered surfaces) and applying three coat of white (lime) wash complete all as specified and as directed by Engineer-in-Charge. |
| 141 | M&L 75mm thick PCC 1:3:6 Type C-1 using 40mm graded aggregate as inplinth protection/path complete all as specified and as directed. |
| 142 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etclaid and bedded in any mortar. |
| 143 | M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base 15 mmth in CM 1;6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 144 | M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10 mmth mortar in cm 1:4 and jointed all as specified. |
| 145 | Dismantling AC sheet roofing with ridge (corugated or semi corrugated) |
| 146 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of ancolour having tensile strength of 550 Mpawith powder coating 150 gm /sqm as in roof covering /cladding to wall fixed with selftapping screws as specified |
| 147 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of ancolour having tensile strength of 550 Mpawith powder coating 150 gm /sqm as in roof covering /cladding to wall fixed with selftapping screws as specified |
| 148 | M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in pressed steel frame, hold fasts and similars articles |
| 149 | Mild steel, plain 1.00 mm thick , black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing withplain 40 mm lap joints with riveted or welded seams,including bending or turning up, mitred angles, etc. as required complete all as specified |
| 150 | Supply & Fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane including hacking out old broken glass complete all as directed |
| 151 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed. |
| 152 | Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors |
| 153 | Taking down main switch / DB as directed by Engineer-In-Charge. |
| 154 | Taking down unserviceable submain/ cable of any size as directed by Engineer-In-Charge. |
| 155 | M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistrandedcable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including cover plate white colour all as specified and directed for:One 3 / 5 pin socket outlet, 5Amps, independent with other switch |
| 156 | One 3 / 5 pin socket outlet 5 amps on same board with other switches. |
| 157 | One light /fan/cell bell point controlled by one one way switch as directed engineer-in-charge |
| 158 | M & L for concealed point wiring complete with 2.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 2.5 sqmm , FRLS type , copper multistrandedcable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including cover plate white colour all as specified and directed for: |
| 159 | supply and fixing Piano /flush type switch 1 way 16A, |
| 160 | supply and fixing piano flush type socket 1 way 16 amp |
| 161 | supply and fixing piano/flush type switch 1 way 6A, |
| 162 | supply and fixing piano flush socket 1 way 6 amp |
| 163 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed. |
| 164 | Supply and Fixing Ceiling rose, surface bakelite 3 terminal, 240 volts, 5 Amps with back plate of 3 mm thickbakelite, laminated hylem sheet of appropriate size, complete ,all as specified. |
| 165 | supply and fixingDB Double door SPN 8 Wayfor MCB ,240 volt with 200 amps rated bush bar |
| 166 | S/F MCB 415 volts,10KA\"c\" curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commisioning (II) SPN 40 TO 63 AMP |
| 167 | Supply and fixing S/F MCB SP 6-32 Amps 240 volts |
| 168 | S&F LED tube light fitting 20W (Double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed. |
| 169 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers |
| 170 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete withIP 65/66 protection complete |
| 171 | S & F lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed. |
| 172 | Supply and fixing SHEET METAL ENCLOSURES FOR DB\"SSPN WHEN MCBs TO BE USED 8 way double door door |
| 173 | Supply and fixing amp rating 240V, 10KA \"C\" curveminiature circuit breaker (MCB) SPN 32 AMP of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 174 | M & L for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed.Note: (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt. |
| 175 | M & L for sub main wiring with 1100 volt grade two single core FRLS Wire PVC insulated and unsheathed cable with stranded copper conductor 4 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 4 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Including taking down old unserviceable sub main wiring. Note : Two runs of 4 sqmm PVC FRLS multi stranded copper cable wire and One run of 4 sqmm PVC FRLS multi stranded copper cable earth wire and One run (01 meter) PVC conduit of suitable size ISI mark will be measured and one unit length. |
| 176 | Supply and fixing modular metal flush box 1/2 modular complete all as specified and directed. |
| 177 | Supply and fixing modular metal flush box 3 modular complete all as specified and directed. |
| 178 | Supply and fixing modular metal flush box6 modular complete all as specified and directed. |
| 179 | Supply and fixing modular white cover plate with frame ,1/2 modulecomplete all as specified and directed. |
| 180 | Supply and fixing modular white cover plate with frame ,3 modulecomplete all as specified and directed. |
| 181 | Supply and fixing modular white cover plate with frame ,6 modulecomplete all as specified and directed. |
| 182 | Supply and fixing modular Dummy platecomplete all as specified and directed. |
| 183 | Supply & Fixing of switchmodular switchone-way6 Ampere module sizecomplete all as specified and directed. |
| 184 | Supply and fixing of socket outlet 5 Ampere, 2 and 3 pins (TOTAL 05 PINS), 2 moduleAC complete all as specified and directed. |
| 185 | Supply & Fixing of switchmodular switch 16 A one-way 16 Ampere module sizecomplete all as specified and directed. |
| 186 | Supply and fixing of modular socket outlet two-in-one, 3/5pin each module suitable for 5 and 16 Amperes module multi purpose type 2 module, AC complete all as specified and directed. |
| 187 | Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. |
| 188 | S & F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. |
| 189 | S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 12ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wallwith IP-43 and IK-09 protection complete all as specified and directed. |
| 190 | Supply and fixing in replacement of LED tube light fitting for all purpose surface and wall mounted with single side connection polycarbonate LED batten with alumimium housing and integrated electronic driver of capacity 20 W ,four feetand connection with PVC insulalted twin core 23/0.0076 twisted copper cable from ceiling rose to tube light fitting complete all as specified and directed. |
| 191 | Supply and fix in replacement of security light fitting LED 35 Watt withdusk and down sensor aluminum pressure dia cast housing with touched glass cover IP-66 protectionIncludingsuitable size GI Bracketand accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fittingall as specified and as directed. |
| 192 | upply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m Complete all specified and directed engr-in-charge |
| 193 | M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 10 sqmm 2 core with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge. (For JCO/OR Md Accn) |
| 194 | M & L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10m all as specified and directed.only punned thickness will be measured. |
| 195 | Supply and lay burnt bricks sub class \"B\" standard size laid across the cable in trenches as protection to the cable all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
