|
| 1 | Surface dressing n exc15 cm deep in soft / loose Soil complete all as specified and directed. |
| 2 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation ,shafts wells etc n exc 10 sqm on plan and getting out in hard & dense complete all as specified and directed. |
| 3 | M&L for PCC type D-2 1:4:8 ( 40 mm Aggregate) Cement concrete in foundations, filling and mass concrete |
| 4 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape reqiured including cranking bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 5 | M&L for TMT bars 8 mm dia to 10 mm dia,cut to length, bent to shape reqiured including cranking bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 6 | M&L for TMT bars 5 mm dia and over upto and including 10 mm dia stirrups, spacers and binders, cut to length, bent to shape reqiured including cranking bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed. |
| 7 | M&L for use and waste of formwork for foundations, footing, bases of columns and plinth beam etc. for flat rough finished surfaces of concrete complete all as specified and directed. |
| 8 | M&L for use and Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.flat rough finished surfaces of concrete complete all as specified and directed. |
| 9 | M&L for use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat rough finished surfaces of concrete complete all as specified and directed. |
| 10 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 11 | M&L for use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 12 | M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate asFoundations, including rafts,footings,foundation beams;plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 13 | M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate asin columns complete all as specified and directed. |
| 14 | M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate asin Roof beams complete all as specified and directed. |
| 15 | M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate asin landing, slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in sheleves and the like complete all as specified and directed. |
| 16 | M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 17 | M&L for use and waste of formwork to chajja for flat rough finished surfaces of concrete complete all as specified and directed. |
| 18 | M&L for reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregate asin chajja complete all as specified and directed. |
| 19 | M&L rendering 15mm thick in two layers cement mortar 1:4 on EXTERNAL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement with WPC complete all as specified and directed. |
| 20 | M&L rendering 15mm thick in cement mortar 1:6 on INTERNAL fair faces or brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cementcomplete all as specified and directed |
| 21 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 22 | M&L 5mm thick rendering in cement mortar 1:3 on concrete surfaces like soffit of RCC slab/ceiling, chajja etc finished surfaces even and smooth, without extra cement complete all as specified and directed. |
| 23 | Supply only liquid water proofing compound |
| 24 | S&FWindow ECO 4000, of double rebate openable/fixed window or Ventilator made of galvanised steel colour coated/powder coated (base steel as per IS 513 Of \"D\" quality, galvanised as per IS 277 with zinc of 120 gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with pure polyster powder up to 50-60 micron thick. Outer frame section 72 x 55 mm , center mullion section 72 x 50 mm, shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch, 2 nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick plain float glass and S. S. mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propyelene Diamine Monomer) gaskets including fixing windows in theConcrete /Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x 12 mm flat at a distance 150mm C/C (Pitch) , 4 mm Glass , Stainless Steel wiremess etc complete all as specified and as directed. |
| 25 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified. |
| 26 | Removing excavated soiln exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified. |
| 27 | M&L for Hardcore (Broken stone) of guager exc 63mmdeposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed toa true surface complete all as spd |
| 28 | M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), complete all as specified and directed. |
| 29 | M&L 75 mm thick cement concrete type C2 1:3:6 (using 20 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide50mm deep and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings. |
| 30 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified. |
| 31 | M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed. |
| 32 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 33 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,1 X SS 300 mm tower Bolt, 1 X SS 300 sliding Bolt, 2X SS 200 mm long Handleall as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws incl in this item). |
| 34 | M&L fornon-skid ceramic coloured tiles (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete.all as sppecified and directed. |
| 35 | M&L forglazed ceramic coloured tiles in vertical surface 300mm X 600mm or 300mm x 450mm set and jointed in neat cement slurry and pointed in white or colour cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and directed. |
| 36 | Supplying and laying of 16 mm outer diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 37 | Same as serial item No 37 above butfitting on walls/ceiling on laying in floors complete all as specified. |
| 38 | Supplying and laying of 20 mm outer diaCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. |
| 39 | Same as serial item No 39 butfitting on walls/ceiling on laying in floor complete all as specified |
| 40 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I complete all as specified and directed. |
| 41 | S & F20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 42 | S & F 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.. |
| 43 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench complete all as specified and directed. |
| 44 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench. |
| 45 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 46 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 47 | S & F 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal complete all as specified and directed. |
| 48 | S & F 75 mm bore PVC (SWR) junction single (Single `T\") equal or unequal complete all as specified and directed. |
| 49 | S & F PVC Floor trap of 75 mm outlet with grating including jointing to waste pipe in run lead complete all as specified and directed. |
| 50 | Providing and fixing Table Topwhite Vitreous China wash basinof specified size and model,32mm CP brass waste coupling,C.P brass pillar cock 15mm sizehaving long neck and Aerator, C.Pbrass bottle trap 32 mm size,extension pipes, wall flanges andconcealed G.I clamps completeincluding making necessary holes and other cutting in the countertop and fixing the wash basin,pillar cock rigidily including makinggood the walls wherever requiredall complete as per the architectural drawings and as directed by Engineer-in-Charge. \"Make of Wash Basin : Cat No.91097 of Hindware (390x390x150 Oval shape) or equivalent of approved makes. CP brass pillar cock Model No. 570012 of Hindare make or equivalent) C.P. Brass bottle trap (Model No. F85003 250X175 of Hindware make or equivalent) (The rate is inclusive of washbasin, waste coupling, pillar cock, bottle trap, brackets, all other fittings and accessories required for completion of work. For thepurpose of payment, only the number of wash basins provided and fixed in position shall be enumerated.).\" complete all as specified and directed. |
| 51 | Providing and fixing white vitreouschina extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete.Make : EWC-Cat No. 20132(P-22) of Hindware (51X36X35 cm)or equivalent, Concealed Cistern- Cat No. 518237 half frame incl acc. of Hindwareor equivalent complete all as specified and directed. |
| 52 | S&F SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed. |
| 53 | S&F of 600x450mm size and 4mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and directed. |
| 54 | S & F 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 55 | S&F bottle trap 32 mm sizewith 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. |
| 56 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 57 | Providing and fixing white vitreous china large flat back/half stall Urinal basin of specified sizes with C.P brass Auto Closing Urinal Flush Valve and C.P. brass spreaders with brass unions, C.P brass bottle trap, extension pipes, wall flanges and concealed G.I clamps complete, cutting and making good the walls and floors wherever required. Make For Urinal : Parryware, Model No :Product code C05831C- 380x405x590 mm;Hindware - Flat Back Small CAT NO-60002;Jaquar-URSWHT-13261; or equivalent. Make For Auto Closing Urinal Flush Valve : Jaquar, Model No : Product code FLV-CHR-1085N Metropole flush valve dual flow with Auto Closing system with 32 mm Extension Body;Hindware - F860035; or equivalent complete all as specified and directed. |
| 58 | Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-incharge and finished smooth |
| 59 | LLDPE septic tank conventional designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 30 Users complete all as specified and directed. |
| 60 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0 M dia X 4.5 M effective depth complete all as specified and directed. |
| 61 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using rubber mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and shaping the edging of paver blocks with cement concrete 1:2:4 type B-1 usinf 20mm graed stone aggregates complete as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 62 | M&L for Excavation for post holes (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for Hard / Dence soil complete all as specified and directed. |
| 63 | S&F shop coated MS work joist, channel, angle or tee sections fixed independently without connecting plates such as MS columns etc. confirming to Fe 410-W( Gde E-250) Quality A. Note:- Structural steel will be shop coated with one coat of zinc chromate primer at contrctors workshop before febrication |
| 64 | S & F shop coated rooftrusses (framed), trussed, crane gantries, rails andfastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W( Gde E-250) Quality A. Note:- Structural steel will be shop coated with one coat of zinc chromate primer at contrctors workshop before febrication |
| 65 | S&F mild steel work in tubular purlins shop coated including special shaped washers etc. complete using ERW in induction butt welded tubes confirming to IS 1161 Grade St-240 complete all as specified and as directed. Note:- Structural steel will be shop coated with one coat of zinc chromate primer at contrctors workshop before febrication |
| 66 | S&F shop coated straps, supports orsuspenders, hooks for hanging fans , MS Plates, nut bolts, hold fast , clamps ,hooks and similar small articleetc. confirming to Fe 290 & Gde E-165. Note:- Structural steel will be shop coated with one coat of zinc chromate primer at contrctors workshop before febrication |
| 67 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 68 | S&F for pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. |
| 69 | M &L for preparing new steel surface and applying two coats of synthatic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 70 | Providing, cement concrete 1:2 :4 type B-1using 20mm graded stone aggregatein coppin, edge concrete to interlocking paver block , ramp concrete etc. complete all as specified and as directed |
| 71 | M&L for broken stone or boulders (granite, basalt, trap) hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as directed. |
| 72 | M&L for 100mm thick PCCType D-2 1:4:8 (using 40 mm gradedstone aggregate) sub base concrete all as directed. |
| 73 | M&L for 100mm thick PCCType C-2 1:3:6(using 40 mm gradedstone aggregate) sub base concrete all as directed. |
| 74 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand completed all as specified and directed. |
| 75 | M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG / with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass/GI screws for mounting switches, sockets, fan regulator, etc. of any size as per site requirement for mounting switches, sockets, fan regulator etc complete all as specified and directed for the following points:- |
| 76 | One light / exhaust fan point controlled by one switch |
| 77 | One 6A socket point controlled by one switch on independent board |
| 78 | One 6A socket point controlled by one switch on same board |
| 79 | All as per item No. 75.00 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm FRLS copper wires. |
| 80 | All as per item No 75.00 here in before but 2 runs x 4.00 Sqmm + 1run x 4.00 SqmmNote: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 81 | M&L for sub main wiring along with earth wire with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 25mm concealed in wall/ floor etc complete all as specified and directed for the 2runs x 6.0 Sqmm(Ph & N) + 1run x 6 Sqmm (earth wire) sizes:- (Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length) |
| 82 | S&F switch piano type, single pole, one way, 6 amps, 240 volts, ISI marked with valid CML complete all as specified and directed. |
| 83 | S&F Socket 5 pin, 6 Amp, universal type, 240 volts, ISI marked with valid CML complete all as specified and directed. |
| 84 | S&F Switch piano type, single pole, one way, 16 amps, 240 volts, ISI marked with valid CML complete all as specified and directed. |
| 85 | Supply and fix of Lamp holder, angle type with metal ring, PVC/Polycarbonate bodycomplete all as specified and directed. |
| 86 | S&F ofCeiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed. |
| 87 | Supply and fix LED Bulb /Lamps suitable B22 and E 27 Cap of 12 Watt Cat Part No SZBLBB22012 or equivalent to Bajaj/Philips/Havells. |
| 88 | Supply and fixof modular MCB protected plug and socket board in sheet steel enclosure with 20A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket boardall as specified and directed. |
| 89 | Supply and fix electric water heater, storage type steel body with Strainless Steel inner tank and heating element upto 2 KW Capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. |
| 90 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers etc complete. |
| 91 | Supply and fixintegrated LED batten 20 watt, 4 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting complete all as specified and directed. |
| 92 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 93 | Supply and fix of LED street/security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 25mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 0.5 sqmm from ceiling rose to connector of fitting complete all as specified and as directed. |
| 94 | Supply and fixof MCB distribution board, SPN, 8 way, 230 V, 1 phase, AC with MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB complete all as specified and directed. Note: MCCB / MCBs shall be measured and paid separately. |
| 95 | Supply and fixof MCB 40A, 10 KA, SPN, \"C\" curve, 240 V, 50 Hz complete all as specified and directed. |
| 96 | Supply and fixof MCB 40-63Amp, 240 V with breaking capacity 10 KA, \"C\" series complete all as specified and directed. |
| 97 | Supply and fix of MCB 6 - 32A, 10 KA, single Pole, \"C\" curve, 240 V, 50 Hz complete all as specified and directed. |
| 98 | M&L for earthing complete with galvanized iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level connecting to GI wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- (i) The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh, protection pipe, earth wire up to 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. (ii)Contract must ensure earthing test result less than 5 Ohm and submitted test report to Engr-in-Charge. |
| 99 | Supply, layingandfixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 10 sq mm 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed. |
| 100 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
