|
| 1 | Rough excavation not exceeding 1.5 m deep and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n,exc 1.5m wide and n,exc 1.5m depth for foundation, etc, n exc 10 sqm on plan and n exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25cm thick in soils complete all as specified and directed. |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 5 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling mass concrete all as specified and directed. |
| 6 | M & L for RCC (nominal mix) 1:2:4 type B1 (using 20mm graded aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams, lintel beams , roof beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc. complete all as specified. |
| 7 | M & L for RCC (nominal mix) 1:2:4 type B1 (using 20mm graded aggregates) as in columns, piers , posts etc. complete all as specified. |
| 8 | M & L for RCC (nominal mix) 1:2:4type B1 (using 20mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc. complete all as specified and directed. |
| 9 | M & L for Fair finished flat formwork to sides of concrete foundations, footings, bases of columns,and soffits (if any) of plinth beams; and similar work; complete all as specified and as directed. |
| 10 | M & L for Fair finished square , rectangular or polygonal formwork to sides of pillars, columns, posts, piers etc. complete all as specified and as directed. |
| 11 | M & L for Fair finished flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 12 | M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming toFe 500 or Fe-550 as in steel reinforcement for concretecomplete all as specified and directed. |
| 13 | All as item No above but 5 mm dia and over up to 10mm dia of steel bars as in stirrups, spacers, rings etc complete all as specified and directed. |
| 14 | M & L for MS work as in tubular , rafters, purlins, posts and similar work(round/square/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtrincluding post special shaped washers, gusset plates etc complete using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified and directed. |
| 15 | M&L for providing precast reiforcement cement concrete type B1 1:2:4 (using 20mm graded aggregates) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throat- ing etc. andsetting in cement complete all as specified and directed. |
| 16 | M&L for concrete bed to drain pipes 150 mm bore including packing under and hunching against the sides of pipe, after they are laid and tested in cement concrete 1:3:6 type C-2 etc complete all as specified and directed. |
| 17 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds,mitred/stopped ends etc complete all as specified and directed. |
| 18 | M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in benching of man holes including forming centre channels half round or 1/4 section complete all as specified and directed. |
| 19 | S&F 150 mm PVC (SWR) pipes single socketedin any length with rubber ring joints, laid in trenches and jointed or any other Situation, complete as all specified and as directed. |
| 20 | S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to mainT, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 4mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed . |
| 21 | M&L 4mm thick E Board 600x600 mmprepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-chargefixed or laid in ceiling timber /GI/ aluminiumframe work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and as directed. |
| 22 | S&F 2nd class SW boarding 20mm thick fixed with nails in eaves board planned one side with butt joint complete all as specified and directed. |
| 23 | M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and directed. |
| 24 | S&F 30 mm thk Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete all as specified and directed. |
| 25 | S&F 35mm thick 2nd class hard wood glased skelton shutters open rebated and prepare to receive glass, gauze, etc complete all as specified and directed |
| 26 | S&F stainless steel wire cloth,0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 27 | S&F 12 mm thick block boards grade 1 quality, exterior grade, commercial type fixed with screws to timber frame complete all as specified and as directed |
| 28 | S&F 0.90 mm thickdecorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and directed. |
| 29 | S&F butt hinges 75 mmmediumweight, stainless steel, and fixed complete all as specified and directed |
| 30 | S&F Butt hinges 125mm, mediumweight, stainless steel, and fixed complete all as specified and directed. |
| 31 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete150 mm long complete all as specified and directed. |
| 32 | S&F Aluminium anodised barrel tower bolts of extruded section and fixed complete100 mm long complete all as specified and directed. |
| 33 | S&F extruded aluminium alloy handles fabricated type anodisedof size 150 mm complete all as specified and directed. |
| 34 | S&F extruded aluminium alloy handles fabricated type anodisedof size 125 mm complete all as specified and directed. |
| 35 | S&F Aluminium alloy, anodised, sliding door bolt with haspstaple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 36 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed |
| 37 | S&F powder coated (powder coating min 50 micron)anodised two or three track sliding type window and ventilator shutters or side hung / without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified as directed. |
| 38 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame n.exc 0.50 sqm complete all as specified and as directed. |
| 39 | M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed. |
| 40 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n. exc 0.50 sqm complete all as specified and as directed. |
| 41 | M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified as directed. |
| 42 | M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified. |
| 43 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof covering / cladding including fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, complete all as specified and directed. |
| 44 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tenssile strength of 550 Mpa as in roof coveringincluding fixing with self driving machine made screws with washers andfitting of same manufacture of approved profile, shape and colour complete all as specified and directed. |
| 45 | M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over and including a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed. |
| 46 | M&L for 25 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) used over sub base to recd floor tiles complete all as specified and directed |
| 47 | M&L for Non Skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etcset and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick in CM(1:6). complete all as specified and directed. |
| 48 | M&L for non skid ceremic white tiles7 to 8mm thickarea of each tile exc 0.18 sqm but n exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bedin CM 1:6 complete all as specified and directed. |
| 49 | M&L for 18/20mm thk granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and incl pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite over and including 20 mm thick cement screed bedin CM 1:4 complete all as specified and directed. |
| 50 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform, and other similar situation complete all as directed. |
| 51 | M&L for rendering10mm (cement plaster 1:6) thick on fair face of brick-work or concrete finished even and smooth without using extra cement complete all as specified and directed. |
| 52 | M&L for rendering15mm (cement plaster 1:4) thick on fair face of brick or concrete, finished even and smooth without using extra cement mixed with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions complete all as specified and directed. |
| 53 | Supply only Integral waterproofing compound |
| 54 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercia plywood and fixed to wooden plugs with chromium plated brass screws and cup washers completed all as specified and directed. |
| 55 | S&F for 20 mm diaharrison rails, stainless steel chromiun plated with fixing brackets stops , rollers etc all as directed and specified. |
| 56 | S&F for 20 mm dia brass chromium plated brackets all as directed and specified. |
| 57 | S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specifiecation complete all as specified and directed. |
| 58 | S/F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 59 | S&F Bib taps, cast copper alloy fancy type 15mm bore , Chromium plated screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 60 | S&F 15 mm bore CP health Faucet cock with Flexible pipe 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 61 | S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed. |
| 62 | S&Fshower rosecast copper alloy, chromium plated,fancy type,with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed |
| 63 | S&F15 mm bore brass CP basin mixer for mixing hot & cold water screwed down high pressure for iron pipe and fixed complete all as specified and asdirected |
| 64 | S&F vitreous china wash down water closet pan (Pedestal Pattern) with P or S Trap white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and as directed |
| 65 | S&F plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 66 | S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 67 | S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm incl pedastal complete all as specified and directed. |
| 68 | M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 69 | M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed |
| 70 | M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and directed. |
| 71 | S&F PVC (SWR) bends 110mm dia complete all as specified and as directed |
| 72 | S&F PVC (SWR) bends 75mm dia complete all as specified and as directed |
| 73 | S&F PVC(SWR) 75mm dia vent cowls complete all as specified and directed |
| 74 | S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed. |
| 75 | Dismantling water tanks exc 250 ltrs but not exc 500 ltrs capacity , complete all as specified and directed |
| 76 | Supplyand fixingrotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float ball brass valves, high pressure, with polythene float and flynutcomplete ,screwed for ironpipe or brass ferrule and fixed for iron pipe and fixed all as specified and directed. |
| 77 | S&F brass chromium plated tubular towel rail 20mm dia D type 60 cm long between flanges complete all as specified and directed |
| 78 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 79 | All as per Item above here–in–before, but for 20mm dia (Bore). |
| 80 | S&F stop valve cast copper alloy chromium plated screwed down, high pressure with crutch or butterfly handle 15mm dia complete all as specified and directed |
| 81 | M & L for hardcore of broken brick/stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified and directed. |
| 82 | M&L for 75 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded agg) as in plinth protection finished even and smooth without using extra cement.(incl necessary joint filling with mixture of paving bitumen & sand in 1:3) complete all as specified and directed. |
| 83 | S&F MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 84 | M & L for preparation of new plastered/concrete surfaces of walls, providing 1 mm thick of white wall care puttyto achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and directed. |
| 85 | M&L forpreparation of new steel surfaces of any description ,over 10 cm in width or girth,not otherwise described and applyingtwo coat of synthetic enamel paint over a coat red oxide primer all as specified. |
| 86 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 87 | M&L for preparation ofnew plastered/concrete surfaces of walls and priming with alkali resistant primer paint applying two coats of weather coat exterior paint with roller etc complete all as specified and as directed. |
| 88 | M&L for 100 mm thick cement concrete 1:4:8, type D-2 (using 40mm graded agg) as in sub base even and smoothwithout using extra cement complete all as specified and directed . |
| 89 | M&L for 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) used over sub base to recd tiles complete all as specified and directed |
| 90 | M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination &fixed with screws to timber frame work complete all as specified and directed. |
| 91 | S&F double legged floor door stopper aluminium alloy with rubber etc complete all as specified and as directed. |
| 92 | S&F 30 mm thk Flush door shutters solid core construction with block board core and plywood face pannels , commercial type on both sides complete as per specified and directed. |
| 93 | S&F half round PVC rain gutter of dia 180mm including clamps, bolts and nuts complete all as specified and as directed. |
| 94 | S&F steel window with side hung shutters including projection as box type hinges with steel handles and peg stay with glazing bars including one shop coat of red oxide primer complete all as specified and directed. |
| 95 | S&F 18/19 mm thick block boards grade 1 quality, exterior grade, commercial type fixed with screws to timber frame complete all as specified and as directed |
| 96 | S&F 30mm width of flaps (When open in mm) continuous (piano) hinges, mild steel , bright finish or electro galvanised complete all as specified and directed. |
| 97 | S&F designer extruded brass handles, fabricated type polished of size 150mm completeall as specified and directed. |
| 98 | S & F Mild steel Hand Rails, half rounded , Angles, bars, flats drilled and countersunk for balusters running bars for doors , balustes, nosing to steps including embeding in concrete and screwing etc., as in supports for stiffening of fencing, wall ties, wind ties for roof including securing bolts , hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and directed. |
| 99 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 20mm thick cement screed bed in CM 1:3 complete all as specified and direcetd. |
| 100 | M&L for Machine cut kota stone slab 20-25mm thick in steps , skirting , dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15mm thick cement backing coat in CM 1:3 complete all as specified and direcetd. |
| 101 | Excavation in post holes each n.exc. 0.5 cum in soft/loose soil getting out returning, filling in and ramming earth or broken rubble mixed with earth around in layer n.exc. 25 cm, watering and removing surplus soil to a distance n.exc. 50 mtr and making good surface complete all as specified and directed. |
| 102 | M&L forPCC (1:3:6), type C1 (using 20 mm graded stone aggregate) as in foundation filling and mass concrete including all necessary form work complete all as specified and directed. |
| 103 | M & L for MS work in roof trusses (framed),trussed, purlins,crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee,angle,channel of flat section) including distance pieces, cleats etc. conforming Fe410 Grade E250 quality A including all necessary drilling, bolting or riveting, weldingcomplete all as specified and directed. |
| 104 | M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, weldingetc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 105 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality- A Fe comlete all as spd and directed. |
| 106 | M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate as in sub base to floor finished rough to receive finishes. complete all as specified and as directed |
| 107 | Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and directed |
| 108 | Taking down chowkats or frames n. exc 1.50 Sqmeach with shutters (without taking off shutter from the frames) complete all as specified and directed. |
| 109 | Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and directed |
| 110 | Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital, similar pattern as in roof coverings. complete all as specified and directed. |
| 111 | Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 112 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid in any mortar complete all as specified and directed. |
| 113 | Dismantling wall and ceilling boards of any description including cover fillets complete all as specified and directed. |
| 114 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed |
| 115 | Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and directed. |
| 116 | M&L for 2nd class hard wood plain fillets.square, rectangular ortriangular insection, cleansawn, securedwith nails orbrads , sectional area exc. 13 and n.exc. 25 sqcm complete all as specified and directed |
| 117 | S&F for Solid PVC Wall Lining consisting of 5mm thick wood grain or plain white PVC sheet inclusive of solvent cement or nails and fixing at site on wooden frame as per specifications and drawing as in eaves board plained complete all asspecified and directed. |
| 118 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 119 | M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with aluminium framed work complete all as specified and as directed. |
| 120 | S&F ball bearing drawer channel of size 500 mm long complete all as specified and as directed. |
| 121 | S&F Brass barrel tower bolts of extruded section and fixed complete150 mm long complete all as specified and directed. |
| 122 | S&F extruded brass designer handles fabricated type anodised of size 300 mm complete all as specified and directed. |
| 123 | S&F extruded brass designer handles fabricated type anodised of size 150 mm complete all as specified and directed |
| 124 | S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed |
| 125 | S&F powder coated (powder coating min 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. |
| 126 | S&F Sheet glass, 5.50mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading complete all as specified and directed. |
| 127 | Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed. |
| 128 | M&L for rendering10mm (cement plaster 1:6) thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and directed |
| 129 | M&L for rendering15mm (cement plaster 1:4) thick on the other side of lathing with approved Water proofing compound @ 3% by the weight of cement or as per manufacturers instructions complete all as specified and directed. |
| 130 | S&F bevelled edge looking mirror of selected quality glass, mounted on chromium plated brass holder\"s and screws or commercia plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 131 | S&F for 12mm thick toughned glass as in bathroom partitions including one hingeddoor, partition fixed with floors and wall , including one openable door with self closing arrangement fixed with stainless steel connectors to glass and similar work including cutting to shape, drilling holes and fixing with single leg spider , ceiling/bottom SS 304 connectors wall to glass and glass to glass of required sizes , all necessary fittings upto all height incl scaffolding complete all as specified and directed. |
| 132 | S&F Infinity white shower panels of size 1500x200mm shower panel without thermostate mixer in white glass finish and with wall mixer function, incl 1.20mtr hand shower with flex tube.(Jaguar Cat Part No-SHP-WHT-G0843JAX/Kohler/ Grohe) fixed complete all as specified and directed. |
| 133 | Supply and fix Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed(ISI Marked) complete all as specified and as directed. |
| 134 | S&F Vitreous china table top basin - white matt , Kubix prime range of Jaguar of size 600x440x150mm including 32 mm waste coupling with chromium plated bottle trap (Jaguar Cat part No-KUS-WHM-35931PM//Kohler/ Grohe) complete all as specified and as directed. |
| 135 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 136 | S&F glass corner shelf with bracket of (Jaguar Cat Part No CAN-CHR-1173//Kohler/ Grohe) all specified and directed |
| 137 | S&F Soap dish holder with bracket of (Jaguar Cat Part No AKP-CHR-35731P//Kohler/ Grohe) all specified and directed |
| 138 | S & F Towel rack 600mm long with lower hangers , stainless steel complete all as specified and as directed. (Jaguar Cat Part No-AKP-35781PS//Kohler/ Grohe). |
| 139 | S & F Towel ring,stainless steel complete all as specified and as directed. (Jaguar Cat Part No-AKP-CHR-35721P//Kohler/ Grohe). |
| 140 | S & F Toilet paper roll holder ,stainless steel complete all as specified and as directed. (Jaguar Cat Part No-AKP-CHR-35753PS//Kohler/ Grohe). |
| 141 | S & F Vitreous China rimless single piece desgin WC including seat cover closed and flushing cistern with siphonic effect, tornado flushing , dual flush-2.6/4.6 LPF, anti germ glaze pattern single piece size 360x675x750mm complete all as specified and as directed. (Jaguar Cat Part No- OPS-WHT-15853 S300UF//Kohler/ Grohe). |
| 142 | M&L for preparation of old wooden surfaces of any description over 10cm in width or girthand treated with one coats of synthetic enamel paintcomplete all as specified and directed. |
| 143 | Taking up or down steel tubing and disconnection, for 15mm bore of pipes. |
| 144 | Taking up or down steel tubing and disconnection, for 20mm bore of pipes. |
| 145 | Cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 146 | M & L 100mm thick PCC 1:2:4 type B-1 using (20mm graded aggregate) as in subfloors finished even and rough complete all as specified and as directed. |
| 147 | Complete removal existing treatment and applying1mm thick of white wall care putty or cement paste to achieve smooth surfaces and applying two coats of Oil Bound Distemper of approved shade/tint complete all as specified and as directed. |
| 148 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked,including 20 mm dia concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitablesteel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light/Fan point controlled by one switch. |
| 149 | Description all as per Srl item No.1 here in before but for socket outletpoint 5 Amp on Independent board. |
| 150 | Description all as per Srl item No.1 here in before but for socket outlet point 5 Amp on same board. |
| 151 | Description all as per serial item No 1 above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 152 | Supply and fixing modular switch 1 way 6A module 230/250 volt , AC supply,ISI Marked, with cover plate complete all as specified and directed. |
| 153 | Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 modulewith frame and cover complete 230/250 Volts,50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed. |
| 154 | Supply and fixing modular switch 16A1 module with frame and cover complete 230/250 Volts,50 Hz , AC supply, ISI Marked, c with cover plate omplete all as specified and directed. |
| 155 | Supply and fixing modular sockets 6A 2/3 pin combined 2 module, with frame and cover complete230/250 Volts,50 Hz , AC supply, ISI Marked, with cover platecomplete all as specified and directed. |
| 156 | Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wallwith 2 nos PVC block of suitable size complete all as specified and directed. |
| 157 | S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified. |
| 158 | S & F Exhaust fan 230 volts , 250mm,plastic body includingmaking all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall. |
| 159 | S&F lamp holder, insulated body, with back plate for batten fittingcomplete. |
| 160 | Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed. |
| 161 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. |
| 162 | Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star ratedvertical type includng fixing of bolts , nuts grouted into the wall, and necessary cement work , making good of disturbed surface of wall, giving electric and water connection and testing after installation complete all as specified and directed. |
| 163 | S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia all as specified and directed. |
| 164 | Supply and Fix of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed |
| 165 | Supply and fixbib tap 15mm dia, outer thread, cast copper alloy chromium plated complete inclusive 15mm dia GI socket and all incoming water connection and testing for entire satisfaction for Engr-in-Charge |
| 166 | Supply and fix in repairs MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 167 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed |
| 168 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"s.complete all as specified and directed |
| 169 | Supply and fixing in repair round/rectangular shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as direcetd. |
| 170 | Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 171 | Supply and fix in repairs MCB Distribution board , 240 volts single pole andneutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. |
| 172 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling inISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduitshall be measured as one RM. |
