|
| 1 | S&F in repair/new Stainless steel wire cloth 0.36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with stainless steel wire staples complete all asspecified anddirected. |
| 2 | S&F steel water tubing galvenised, 15mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed. |
| 3 | Refixing only steel water tubing galvenised, 15mm bore, medium grade with all new fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed. |
| 4 | S&F steel water tubing galvenised, 20mm bore, medium grade with all fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed. |
| 5 | Refixing only steel water tubing galvenised, 20mm bore, medium grade with all new fittings and fixed to walls, concealed wiring including cutting chases in walls etc and taking up or down steel water tubing and connection complete all as specified and directed. |
| 6 | S & F in repair Gun metal,globe or gate valvescrewed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions, for boreof pipe 20 mm,complete all as specified and directed. |
| 7 | S&F in repair Float Ball valves, high pressurealuminium rod & high density plastic ball, screwed for iron pipe20 mm dia (minimum weight 210 gms) complete all as specified and directed. |
| 8 | Disconnecting existing tanks, setting side for repairing , cleaning and removing all scale and dirt, etc and hoisting after cleaning and removing all as specified and directed etc from tanks of circulating pipe etc of capacity upto and including 500 ltrs and endorsed the word \"CLEANED ON WITH DATE\" with white paint including replacement of broken/unserviceable fitting such as Elbow, tee, socket, nipple of any size etc complete all as specified and directed. |
| 9 | Material ad labour for preparation of Old plastered surfaces of walls & applying one coat of oil bound distemper complete all as specified and directed. |
| 10 | M&L for complete removal of existing treatement of walls and applying two coat of oil bound distemper on walls over a coat of primer over 1 mm thick wall care putty on wall, complete all as specified and directed. |
| 11 | M&L for Preparation of old decorated surfaces of wall and facia and applying one coat of weather proof apex paintupto Third Floor of any tint etc complete all as specified and directed |
| 12 | Complete removal of existing treatment including washing, rubbing down with sand paper and stopping ofpainted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. andapplyingtwo coat of weather proof exterior emulsion (APEX) of Alkali & fungal resistance,dirt resistance qualities, after making good uneven surface/holes with Birla wall care putty coloured in same shade where ever required using smart periodical techniques etc (up to 2nd storey with necessary scaffolding) complete all as specified and directed. |
| 13 | S&F for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etcwith welding work confirming to Fe-410-W (Gde-E-250) quality B two coat of synthetic enamel paint over a coat of red oxideincluding dismantling wrought iron or mild steel work of any descrfiption not otherwise providedincuding two coat of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 14 | Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto second floor .complete all as specified and directed. |
| 15 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing sheets of any descriptioncomplete all as specified and directed. |
| 16 | M&L for Filling of sunken floor with PCC 1:5:10 using 40mm graded crushed stone aggregate including breaking and removal of existing filling of lime concrete/PCC/brick bats and rubbish out off the premises, etc complete all as specified and directed. |
| 17 | M& L for applying water proofing membrane APP (Atactic Polypropylene Polymer) modified membrane with non-woven polyster reinforcement/mat with thermal insulationof weight not less than 3.6 kg/sqm and thickness not less than 3 mm (reinforced) with polyester Non woven fabric weighing not less than 160 gms per sqm , laid by torch application method with overlap 100 mm on length side and 100 mm on the width side over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 on prepared surfaces including 20 mm thick screed bed in cement mortar (1:4) even and fair & including taking out /demolition of old treatmentcomplete and removal of debrises not exceeding 50 mtr and depositing where directed complete all as specified and directed.NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.’ |
| 18 | supply only Liquid water proofing compoundcomplete all as specified and directed |
| 19 | M&L for walling of random rubble stone maronary uncoursed well bonded, bedded and solidly hearted built in CM (1:6) complete all as specified and directed. |
| 20 | Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 21 | M & LBrick work with sub class `B\" bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed |
| 22 | M & Lfor Half thick Brick wall work curved on plan in any radius with old size bricks built in cement mortar 1:4and external pointed flush in same mortar as the work proceeds. complete all as specified and directed. |
| 23 | M&L For Rendering 10mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the sufaces even and smooth without using extra cement including Preparation of newly plasterd surfaces of walls and applying two coats of oil bound distemper over one coat of primer and wall care putty including taking down old plaster complete all as specified and dirceted. |
| 24 | M&L For Rendering 15mm thick in cement and sand mortar 1:4 finished fair even and smooth without using extra cement including Preparation of newly plasterd surfaces of walls and applying two coat of cement base paint over a coat of primer including taking down old plaster complete all as specified and dirceted. |
| 25 | M&L Rendering 5mm thick in CM 1:3 on any sufaces of brickwork, finishedeven and smooth without using extra cement including Preparation of new plasterd or unplastered surfaces of celling and applying three coat white wash on ceiling including taking down old plaster complete all as specifiedanddirceted. |
| 26 | M&L Preparation of old decorated surface of ceiling and applying two coats of white wash complete all as specifiedanddirceted. |
| 27 | M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specifiedanddirceted. |
| 28 | M&L for Granite (of any type), 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platformincluding moulding, rounding , chamfering and making hole for Gas pipe and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade including dismantling old granite slab complete all as specified anddirected. |
| 29 | S&F Glazed ceramic tile 450x300x7mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 mm thick bedding layer in cement and sand mortar 1:4 including dismantling floor, hearth or wall tiling andcement mortar bedding (but not backing) and removing rubbish off premises complete all as specified anddirected |
| 30 | Rounding/mouldingto edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc. complete all as specified anddirected |
| 31 | M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to matchincludingScreed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling andcement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed. |
| 32 | M&L for Non skid ceramic tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to matchincludingScreed bed or bedding layer of mortar 15 mm thick in CM 1:6 including dismantling floor, hearth or wall tiling andcement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed. |
| 33 | M&L for kota stone floor 16-18 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortor 15mm thick in CM 1:6) including dismantling floor, hearth or wall tiling/stone slab andcement mortar bedding (but not backing) and removing rubbish off premisescomplete all as specified and directed. |
| 34 | M&L for kota stone14-16mm thick,in skirting,set and jointed in neat cement slurry and pointed in white or coloured cement to match over10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling/stone slab andcement mortar bedding (but not backing) and removing rubbish off premisescomplete all as specified and directed. |
| 35 | S & F in repair110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed |
| 36 | S & Fin repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed |
| 37 | S & Fin repair 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed |
| 38 | S & Fin repair 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed |
| 39 | S & F PVC (SWR) plain Bends in any radius 110 mm borecomplete all as specified and directed |
| 40 | S & F PVC SWR plain Bends in any radius 75 mm bore complete all as specified and directed |
| 41 | S&F in repair PVC (SWR) reducers 110 x 75 mm complete all as specified and directed. |
| 42 | Supply and fixing in repair PVC (SWR) floor trap 75 mm dia plain with CPgrating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 43 | M&L for Corrugated mild steel 0.80 mm thick sheeting with two corrugations side lap, fixed with coachscrews and washers, in roofs, walls etc complete all as specified and directed. |
| 44 | M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) with WPC in sunken floor with proper slope including application of 3mm APP membrane using bituminous coating @ 3.00 Kg/Sqm complete all as specified and directed. (WPC shall be measured and paid separately). |
| 45 | M&L for Welding in repairsexc 2.5cm but n. exc. 5 cm in length, thickness ofmetal to be welded exc, 6mm but n.exc. 9mm, including all necessary arrangement for welding complete all as specified and directed. |
