|
| 1 | Renovation of Guest House |
| 2 | Supply and fixing of TV Unit with back Panelling of size 1.2 x 0.9 m of decorative Polystrene based panels with charcoal core, 4/6mm thick fixed to 9mm thich Plywood of MR grade confirming to IS:303. The Plyowood will be screwed on a frame work of Aluminium extruded sections of size sections of 50 X 50 x 1.4 mm in both horizontal and vertical direction at 600mm c/c fixed to the wall. A ledge of size 1.2 x 0.3 m made of 18 mm thick Pre-laminated board confirming to IS 12823:2015, Grade II with edges covered with PVC edge banding of approved colour and shade fixed to the wall Necessary opening, cutouts to be provided for effective wire management, complete as per drawing and instructions of the Engineer-incharge. |
| 3 | Supply and fixing of TV Unit with back Panelling of size 3m x 3 m of decorative Polystrene based panels with charcoal core, 4/6mm thick fixed to 9mm thich Plywood of MR grade confirming to IS:303. The Plyowood will be screwed on a frame work of Aluminium extruded sections of size sections of 50 X 50 x 1.4 mm in both horizontal and vertical direction at 600mm c/c fixed to the wall. A L- ledge of size (1.8+1.2 )x 0.3 m made of 18 mm thick Pre-laminated board confirming to IS 12823:2015, Grade II with edges covered with PVC edge banding of approved colour and shade fixed to the wall Necessary opening, cutouts to be provided for effective wire management, complete as per drawing and instructions of the Engineer-incharge. |
| 4 | Supply and fixing of Luggage and shoe rack of size 1.2 x 0.45 x 0.6m, the top of the luggage rack will be 25mm thick Pre- laminated board with Stainless steel trims inlay. A ledge of size 1.2 x 0.45m made of 18 mm thick Pre-laminated board to be fixed within the frame. The Pre-laminated board to confirm to IS 12823:2015, Grade II, with edges covered with PVC edge banding shouldbe of approved shade and colour, including all hardware, complete as per drawing and as per the instructions of the Engineer-in-charge. |
| 5 | Supply and fixing of Writing table of size 1.2 x 0.60 x 0.75m, made from 18mm thick Pre-laminated board for the top and the vertical supports. The Pre-laminated board to confirm to IS 12823:2015, Grade II with edges covered with PVC edge banding and should as per approved shade and colour including all hardware, complete as per drawing and as per the instructions of the Engineer-incharge. Cost to include one number of straight back chair with armrest made of rubber wood / engineered wood, with foam and Polyster fabric for seat and back. |
| 6 | Supply & fixing of Ledge of size 1.2 x 0.3 m made of 18 mm thick Pre-laminated board confirming to IS 12823:2015, Grade II with edges covered with PVC edge banding of approved colour and shade fixed to the wall. complete as per drawing and instructions of the Engineer-incharge. |
| 7 | Supply of King Size Bed of size 2.08m x1.88 x 0.25m (without storage) all made of Pre-laminated boardconfirming to IS 12823:2015, Grade II of approved colour and shade. The edges to be covered with PVC edge banding and Rounded corners on one side of the bed. A headrest of size 2.78 x 1.05m made of 18mm thick Prelaminated board / BWP Plywood confirming to IS : 710 grade, covered with 50mm thick cushion of 40 density foam and leatherette fixed to the wall, complete with all necessary hardware, fittings, etc. as per the design(quote without matress) |
| 8 | Supply and laying of Dual Sided mattress of size 198 x 183 x 20 cms with outer cover of knitted fabric having layers of soft foam and High Density Foam with quilted foam border. The mattress will be flippable with Firm & Soft Sides. The mattress should have a warranty of minimum 10 years. The make and model must be approved by the Engioneer-incharge before purchase. |
| 9 | Supply and fixing of wall mounted Bed side tables of size 0.45 x0.38 x 0.15m made of Pre-laminated boardconfirming to IS 12823:2015, Grade II with PVC edge banding of approved colour and shade, One drawer supported on sliding steel channels complete with all necessary hardware, fittings as per drawing and the instructions of the engineer-incharge. The bed side table can also be a part of the Bed during execution. |
| 10 | Supply and fixing of free standing Wardrobe of size 1.5 x 0.45 x 2.1made from 18mm thick Pre-laminated board for the top and the vertical supports. The inside of the wardrobe to have one vertical and four horizontal shelves made of 18mm thick prelaminated board. The Pre-laminated board to confirm to IS 12823:2015, Grade II with edges covered with PVC edge banding and should as per approved shade and colour including all hardware, complete as per drawing and as per the instructions of the Engineer-incharge |
| 11 | Supply and fixing of 5mm thick silver coated mirror of size 1.5 x 0.45m fixed to the wall on 9mm BWP plywood confirming to IS:710 on the back and 50mm frame on all sides made from 18mm thick Pre-laminated board . The Pre-laminated board to confirm to IS 12823:2015, Grade II with edges covered with PVC edge banding and should be of approved shade and colour, complete including all hardware, as per drawing and as per the instructions of the Engineer-incharge. |
| 12 | Providing and Fixing of suspended False ceiling consisting of G.I. frame work of standard sections and covered with 12mmthick gypsum board screwed to the frame. The joints between the sheets of gypsum board are to be covered with perforated jointing paper tape and flushed with jointing compoundto provide smooth and durable finish. Rate to Include Painting of the Gypsum ceiling with one coat of primer and two coats of premium acrylic emulsion paint of apporved colour & shade, complete as per design and as per the instructions of the Engineer-incharge. Note : Rate to include cutouts for light fixtures, trap doors in Plywood / Gypsum.Make: GI Channels: Gyproc, Gypsum Board: gyproc or |
| 13 | Verticles of False ceiling consisting of G.I. frame work of standard sections and covered with 12mmthick gypsum boardscrewed to the frame. |
| 14 | Providing and fixing of 9mm thick PVCfalse ceiling of wooden shade, suspended with the frame work and accessories from the roof slab, beamsetc. by means of G I angles, J bolts, Tee runners and edge trim etc., cutting the openings for fixing light fittings, including cost of materails, labours, lead and lift finishing etc.complete as per design and the directions of the Engineer-incharge. |
| 15 | Providing and fixing of box type panelling for corridor area of size 1.8 x 0.9x 0.1 m with shutters, made of 18 mm thick Pre-laminated board confirming to IS 12823:2015, Grade II with edges covered with PVC edge banding of approved colour and shade to the wall. Aluminium sheet of 1mm thick, 6063 grade, pasted to the inside portion of the boardall complete with hardware, hinges, concelaed handles etc. as per drawing and instructions of the Engineer-incharge. |
| 16 | Supply and fixing of Dual curtain track with two curtains, one linen blended cloth with 250-300 GSM or above with matching colour Polyster lining cloth and the other of Polyster material with 115-150 GSM. Both the curtains will be stitched with 75-100mm pleats (American Pleats) with curtain tie backs and fixed to the track as per the instructions of the Engineer-incharge. |
| 17 | Providing and fixing of Customized wall paper with water based ecosolvent print on non woven paper fixed to the wall with odourless glue. Rate to include preperation of wall before installation of the wall paper. The wall paper should be fixed without any creases or folds to ensure a smooth finish. The image to be printed and installation will be as per the selection /instruction of the Engineer-incharge. |
| 18 | Providing and fixing of non woven Vinyl wall paper of minimum 180 GSM washable fixed to the wall with odourless glue. Rate to include preperation of wall before installation of the wall paper. The wall paper should be fixed without any creases or folds to ensure a smooth finish. The design, selection and installation will be as per the choice and instruction of the Engineer-incharge. |
| 19 | Touch-up with wall putty as required, filling of cracks , application of one coat ofinterior primer and two coats of Premium Emulsion paint. Make: Berger / Asian / Equivalent as per the instructions of Engineer- Incharge . |
| 20 | Supply of modularfree standing Corner Table of size 0.5 x 0.5 x 0.45m made with 18 mm thick Pre-laminated board confirming to IS 12823:2015, Grade II with Top covered with 8mm tempered or thoughned glass as per the selection of the Engineer-incharge. |
| 21 | Supply of art work photographs printed on 300 GSM thick paper with high quality printer and vibrant colors along with plexi glass cover and fiber frame of wooden shade with as per the selection ofthe Engineer-incharge. |
| 22 | Supply of good Qualitydecorative FRP Pots in various sizes and shapes - FRP Pots - Small Size(Apprx. Size ranging from Top Dia 0.3m, 0.35m,0.38m and height varying from 0.3 to 0.45m) |
| 23 | Supply of good Quality decorative FRP Pots in various sizes and shapes - FRP Pots - Medium Size(Apprx. Size ranging from Top Dia 0.3, 0.38,0.45m and height varying from 0.45 to 0.6m) |
| 24 | Cleaning of bathroom wall and floor tiles using suitable cleaning agents to ensure stain- free and hygienic surface finish for the existing tiles of the bathroom. The process covers all necessary materials, tools, labour, and safety equipment required to complete the work to a high standardas per the instructionsof the Engineer-incharge. |
| 25 | Cleaning of Ceramic EWC and wash basin using suitable cleaning agents to ensure stain- free and hygienic surface finish. The process covers all necessary materials, tools, labour, and safety equipment required to complete the work to a high standardas per the instructionsof the Engineer-incharge. |
| 26 | Removal of the existing Single lever diverter (Only the exposed part) and replacing it with a similar model of divertor (Only the exposed part) all complete with material andlabour. |
| 27 | Removal of the existing Spout (Only the exposed part) and replacing it with a similarmodel, all complete with material and labour |
| 28 | Supply & Fixing of Rose shower with revolving ball joint & 160mm long shower arm and labour as per the instructions of the Engineer-incharge. |
| 29 | Removal of existing pillar cock of wash basin and replacing the same with similar model of Pillar Cock all complete with material and labour as per the instructions of the Engineer-incharge. |
| 30 | Supply & Fixing of 100mm dia. Hand shower (ABS)with flexible tube of length 1.5m complete with material and labour as per theinstructions of the Engineer-incharge. |
| 31 | Supply & Fixing of Angular stopcock with wall flange complete with material and labour as per the instructions of the Engineer-incharge. |
| 32 | Supply & Fixing of Bottle Trap complete withmaterial and labour as per the instructions of the Engineer-incharge. |
| 33 | Supply and fitting of 450mm braided hosefor wash basin all compelte with material and labour as per instructions of the Engineer-incharge. |
| 34 | Removal of existing waste coupling from the wash basin and replacing the same with similar model all complete with material and labour as per the instructions of the Engineer-incharge. |
| 35 | Supply & Fixing of Chrome finish Bibcock cum Health Faucet with 1m long tube and wall hook complete with material and labour as per the instructions of the Engineer-incharge. |
| 36 | Supply & fixing of wall mounted Unbreakable Ceramic double soap dish holder with drain holes. The soap dish should have Anti- bacterial coating and should be hard water stain resistant, all complete with material and labour as per the instructions of the Engineer-incharge. |
| 37 | Supply & Fixing of CP finish Towel Ring all complete with material and labour as per theinstructions of the Engineer-incharge. |
| 38 | Supply & Fixing of chrome finish Double coat hook complete with material and labour as per the instructions of the Engineer-incharge. |
| 39 | Supply & Fixing of wall mounted chrome finish Tooth brush holder with frosted glass complete with material and labour as per theinstructions of the Engineer-incharge. |
| 40 | Providing & fixing Ist quality scratch and UV resistant, anti-skid matt finish outdoor Vitrified tiles (thickness to be specified by the manufacturer), of approved make, in all colours, of any size approved by Engineer-in-charge, for for parking area, laid with cement based external tile adhesive( water based) conforming to IS:15477, in average 6 mm thickness, including grouting the joints with cement based grout of matching shade complete. |
| 41 | Polishing Existing mosaic floor tiles using a sequence of progressively finer abrasive machine and polishing compounds (such as oxalic acid or commercial agents) to achieve a uniform, glossy finish, as per the latest edition of relevant Bureau of Indian Standards (BIS) codes. The process must include thorough surface preparation, intermediate cleaning between abrasive stages, and the application of a protective sealer upon completion to enhance durability and shine. Any existing damaged tiles shall be replaced and properly grouted prior to commencing the polishing work |
| 42 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 43 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVCinsulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. |
| 44 | Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductorsingle core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required. |
| 45 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessedmedium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor singlecore cable etc as required. |
| 46 | Wiring for group controlled looped light point/ fan point/ exhaust fan point/ call bell (without independent switch) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B |
| 47 | Wiring for light / power plug with 2 X 4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, along with 1 no. of 4 sq.mm FRLS PVC insulated copper conductor for loop earthing as required. |
| 48 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 12 Module (200mmX150mm) |
| 49 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 8 Module (125mmX125mm) |
| 50 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 6 Module (200mmX75mm) |
| 51 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 Module (125mmX75mm) |
| 52 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) |
| 53 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.-TV Cable |
| 54 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch |
| 55 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 A socket outlet |
| 56 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 A switch |
| 57 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 A socket outlet |
| 58 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.TV antenna socket outlet |
| 59 | Supply and fixing of 3W round/squarerecess/surface mounted rolling type LED Downlight with...W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium diecast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours &70% lumen maintenance with CRI>80.Power Input:220- 240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition |
| 60 | Supply and fixing of 3W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of > 120 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty. |
| 61 | Supply and fixing of 6W LED Slim Panel Round /Square suitable for Recessed / Surface mounting made of diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/ Sec 13) : 2012, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10%, with high power LEDs, having System Efficacy of > 120 lumens /watt, CCT: 3000K - 5700K, minimum CRI>70, .etc., complete with earth connection and not less than two years warranty. |
| 62 | Supply and fixing of 8/10w heavy duty LED Down lighter, suitable for Recessed / Surface mounting made of pressure diecast aluminum body with powder coating, acrylic diffuser with driver as per IS: 15885 (Part 2/Sec 13) : 2012 , operating voltage range of 150 to 265 Volts AC, P.F > 0.9, Surge protection: 2KV, THD<10% with high power LEDs, having System Efficacy of > 100 lumens / watt, CCT: 3000K - 5700K, minimum CRI > 70, Luminaire performance complies to IS 10322 (Part 5 / Sec-3) etc., complete with earth connection and not less than two years warranty. |
| 63 | Supply and fixing of 3W LED COB Spotlight suitable for Recessed mounting made of diecast aluminum body with powder coating, high efficiency reflector, with driver, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, surge protection: 2KV, THD<10% with high power LEDs, having System Efficacy of > 120 lumens/watt, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. |
| 64 | Supply and Transportation of 5/6 LED COB Spotlight suitable for recess / Surface mounting made of diecast aluminum body with powder coating, high efficiency reflector, with driver, operating voltage range of 150 to 265 Volts AC, P.F > 0.9, surge protection: 2KV, THD<10% with high power LEDs, having System Efficacy of > 120 lumens/watt, CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. |
| 65 | Providing and Installation of pendent light/ hangining light, with diecast/ extruded Aluminium Luminaire with Epoxy powder coated paint, highly polished and anodized aluminium reflector, die cast Aluminium ceiling mounted cup with Stainless steel suspension kit adjustable upto 1m, suitable for operating at 240v, 50Hz single phase supply, prewired with E27 holder and inclusive of LED bulb. |
| 66 | Supply and fixing of 18-20W, not less than 1100mm length LED batten light with extruded PVC housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of > 120 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. |
| 67 | Supply and fixing of decorative 10W/12W LED Mirror Light fitting in CP steel or brass finish with acrylic diffuser etc. |
| 68 | Supply & Fixing of 48\" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator. Makes: As per list of recommended brands. |
| 69 | Supplying & fixing-flexible LED Strip Light in 5ms length CCT 2800 degree K,CRI>70%. efficacy>80 lumen per W, life>25000 burning hours and Compliance to IS 10322/IEC60598, LM79 & LM80. The LED are driven by HF electronic driver non integrated, with PF>0.95, power losss hould<5% of lamp Wage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM79. The operating in put voltage should be between 130 to275 V. BIS Approved with 2 years Warranty against any manufacturing defect working under standard electrical condition. |
| 70 | Supply and fixing of decorative wall fixture made of metal with brass finish and glass cover, E27 bulb holder and bulb of 8/10W. |
| 71 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable |
| 72 | Supplyand fixing of following sizes of medium class PVC conduit along with accessories in surface/recess incluiding cutting the wall and making good the same in case of recessed conduit as required. 25mm |
| 73 | Supply installation testing and commissioning of 1no of Cat6 Tool less built-in crimping mechanism Information Outlet with Dust Cover Exceed ANSI/ TIA-568-C.2 and ISO/IEC 11801 standards with 1module face plate for Category 6 component performance & Compatible to T568A, T568B wiring pattern and UL-940V0 Rated Plastic &RoHS Compliant. |
| 74 | Supply installation testing and commissioning of 4 pair 23AWG Cat-6 UTP, flexible, double ended patch cords along with 2 nos of RJ 45 connectors with strain relief boots Compatible to T568A,T568Bspecifications including making connections to information outlets Lrngth: 2 mtr /7 ft |
| 75 | Modular Kitchen cabinets- Providing and makingof below counter Kitchen cabinets with shutters and partitions and frame made of 18 mm thick BWR Plywood confirming to IS:710 grade covered with 0.8mm white laminate from inside and 1mm laminate from outside as per design along with 3 Tandem box (Evershine , Olive or equivalent) pullout units operating of smooth and silent runners to store and organize cutlery and other kitchen essentials.Pullout and Cabinet shutters made of 18mm thick BWR Plywood onfirming to IS:710 covered with 1mm colour laminate of approved colour and shade along with necessary autoclose hinges , handles and hardware complete as per design. (L- Shape Counter of 5.64 M ). |
| 76 | Below Counter Shutters in Utility area - Providing and making of Below counterwith 18mm thick BWR Plywood confirming to IS:710 grade covered with 1.00mm colour laminate for theexposed surfaces. |
| 77 | Above Counter Open Selves- Providing and making of above counter Open selves with 18mm thick BWR Plywood confirming to IS:710 grade covered with 1.00mm colour laminate for the exposed surfaces. |
| 78 | Supply of SS Grade 304 Serving Table with Selve above Counter of size 0.9mx1.5m |
| 79 | Supply and fixingof SS Grade 304 Washing trough with Plate and Utensil Rack of size 2.0mx0.9m |
| 80 | Refurbishing of existing storage cabinet by fixing 1.0 mm thick colour laminate of selected shade and colour on top of the exisitnglaminate using suitable adhesive, complete as per the instructions of the Engineer-incharge. |
| 81 | Removal of existing wall tiles and fixing of vitrified wall tiles of suitabel size for enitre Kitchen wall area with polymer adhesive upto 2.1 M height as per the instrucitons of the Engineer-incharge. |
| 82 | Providing and laying Vitrified tiles in flooring (tile on tile) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on the existing floor using Polymer tile adhesive, including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size 600 x 600 mm |
| 83 | Supply and fixing of SS 304 grade stainless steel Canopy Type hood above BURNER with Lights Inside, overall dimensions: 1500X1500X500, complete as per the instructions of the Engineer-in charge. |
| 84 | Supply, Installation, Testing, and Commissioning of CentrifugalBlower, 7.5H.P. III Phase. 960 rpm For ventilation system full M.S. Costruction with motor (12500CFM) fixed to MS fabricated Stand with suitable connections, complete as per the instructions of the Enginee-in charge. |
