Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each and removing from site and making good the disturbed portion in CM 1:3 or PCC 1:2:4 type B-1 complete all as specified and directed. (Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface). |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exc 3.00 Sqm each and removing from site and making good the disturbed portion in CM 1:3 or PCC 1:2:4 type B-1 complete all as specified and directed.(Note: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface). |
| 3 | Taking down shutter of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed. |
| 4 | Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris outside defence land from the site complete all as specified and directed. |
| 5 | Dismantling of wrought iron or mild steel work of any description and in any position complete all as specified and directed. |
| 6 | Material & labour for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, slab, chajja pardi, railing, etc, cleaning thoroughly exposed reinforcement, applying one coat of anti-corrosive paint to the exposed reinforcement, supply and fix of chicken wire mesh of size50 x 50 mm of 1 mm dia wire, weight not less than 0.55 Kg/Sqm & binding with 22 guage mild steel (annealed)binding wire to reinforcement and including rendering 10 mm thick plaster in cement mortar 1:3, after first layer 15 mm thick cementplaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to befinishedeven and smooth with and including water proofing compound by weight as per manufacturer\"s instructions and removing the debris outside MoD land including material and labour for necessary scaffolding and formwork (G+3 storeys) and safety arrangement complete all as specified and directed.(Note :-The finish of the surfaces to be matched with the existing surface.) |
| 7 | Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and directed. |
| 8 | Material & labourfor 10mm thick plaster on fair faces of brickwork or concrete surfaces in cement mortar 1:3 on ceilings, to befinishedeven and smooth without using extra cement complete all as specified and directed. |
| 9 | Material & labour for 15 mm thick cementplaster on fair faces of brickwork or concrete surfaces in cement mortar 1:6, to befinishedeven and smooth without using extra cement complete all as specified and as directed. |
| 10 | Material & labour for 15 mm thick cementplaster on fair faces of brickwork or concrete surfaces in cement mortar 1:4, to befinishedeven and fairwith water proofing compound by weight as per manufacturer\"s instructions including necessaryscaffoldingup to (G+3 storey) complete all as specified and directed.(Note : WPC will be paid separately) |
| 11 | Material & labour Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 12 | Material & labour Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant fixed position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 13 | Material & labour Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 14 | Supply & Fixing rolled mild steel framed work of grade Fe-290 Gde-E-165 quality-A as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etcwelding hold fast, hinges complete all as specified anddirected. |
| 15 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVCfoil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 16 | Supply & Fixing 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 17 | Material & labour for 1st class soft wood factory made 35mm thick glazed and skeleton shutters open rebated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered head s for securingstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and second class hard wood plainfillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sq cm and not exc 25 Sq cm including two coats of synthetic enamel paint over one coat of pink primer with addtional member of shutter with sash bar complete all as specified and as directed.Note : (i) Rates deemed to include for necessary wooden fillets min 5Rm each leaf,stainless steel wire, paintetc (ii) Pattern /modular design of shutters shall be approved by GE / Engineer-in-Charge. |
| 18 | Supply & Fixing windows & ventilators fabricated from Rolled Formed GI Section made of Galvanised steel colour coated(PPGI Sheets) (Base steel as per IS 513 ‘’D’’ quality. Galvanised as per IS 277 with Zinc of 120 gms/Sqm. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick.GI Section of 0.58mm thick inDouble rebate windows in which both glazed shutter andflymesh shutter, 75x58mm outer frame, Mullion 74x53mm, Glazed shutter 52x50mm, Flymesh 42x21mm, Beading for Glass Fixing 12x12mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length metre joined with corner Poly Vinyl Chloride brackets centre mullion fixed with Poly vinyl chloride Mullion caps . Glass of 4mm thick plain float glass fitted with rubber gasketin glazed shutterand wiremesh of Stainless steel of 36 guage to fix mesh in mesh shutter using VC Gypsum Drywall screws and Spoon profile of 0.58mm GI Sheet. Corners of the windows should be joined with corner brackets made of poly vinyl chloride with crca of zinc phosphate coat.Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each,Poly Vinyl Chloride handle 1 in each and Powder coated Peg stay in Glass shutter. Window shall be provided with enamel paint MS Grill/Guard Bars made of 10mm horizontal MS Sq Bar welded to 6x12mm MS Flat at with holes at both vertical ends. Gap between the bars should not be more than 152 mm. Window frames shall be fixed to brick/concrete masonry by using nylon self expansion caps & 75/100 mm MS screwsafter drilling in walls. VC Gypsum Drywall screws should be used while fixing corner brackets, stay, hinges, mullion caps of windows. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2. |
| 19 | Supply & Fixing for clamps; hold fast; bands, straps, supports or stays for galvanised plain mild steel wire including bolts, rainwater, ventilating pipe and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 20 | Supply & Fixing for butt hinges, stainless steel,ISI Marked 100mm size complete all as specified and directed. |
| 21 | Supply & Fixing for MS butt hinges 100mm size, cold rolled, medium weightfixed with screws to wooden frames or welding to steelframes etc complete all as specified and as directed. |
| 22 | Supply & Fixing for aluminium anodized barrel tower bolts of extruded section, length of bolt 150mm long complete all as specified and directed. |
| 23 | Supply & Fixing forextruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and directed. |
| 24 | Supply & Fixing for extruded aluminium alloy handles, fabricated type, 100 mm size complete all as specified and as directed. |
| 25 | Supply & Fixing for aluminium sliding door bolt, 250 mm long,with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 26 | Supply & Fixingfactory made 18 mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company having one side prelaminated and other side plain fixed as in cabinet/ cupboard shutters including providing manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of exiting shutter or any kind of PL board or plyboard completed all as specified and directed. |
| 27 | Supply & Fixing factory made 18 mm (+0.7mm) thick celuka PVC board of density 600 kg/cum manufactured by an ISO 900-2008 certified company fixed as in shelves cabinet/cupboard drawers including providing manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of exiting shelves or any kind of PL board or plyboard completed all as specified and directed. |
| 28 | Supply & Fixing factory made 5 mm thick PVC sheet of density 600 kg/cum manufactured by an ISO 900-2008 certified company, plain 5 mm thick PVC sheet panelling for back side (wall side) and also manufactures test reportand test certificate is mandatory with each and every supply of material including taking down of exiting back side (wall side)or any kind of PL board or plyboard completed all as specified and directed. |
| 29 | Supply & Fixing Continuous (piano) hinges, width of flaps 30mm (when opened) mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 30 | Supply & Fixing aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed. |
| 31 | Supply & Fixingaluminium door stopper double legged with rubber shoe 140mm long fixed to door shutters complete all as specified and directed. |
| 32 | Supply & Fixing mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and directed. |
| 33 | Supply & Fixing for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixedwith tinned tacks or galvanised wire staples complete all as specified and directed. |
| 34 | Supply & Fixingin repair 20 mm dia ,1mm thickaluminium Drapery rod, wooden coated finish with and including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and directed. (Min 2 Nos brackets, 02 Nos End knob, 12 Nos Rings each door/ window). |
| 35 | Demolition of cement concrete from sunken floor, roofs, floors(other than ground floor) hacking of surfaces after cleaning with wire brush (floor and adjoining walls) and disposing off debris outside MoD land complete all as specified and directed. |
| 36 | Demolition of reinforced concrete roofs, slabs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 37 | Material & labour for providing reinforcement cement concretenominal Mix using 20mm aggregate (type B-1 1:2:4) as inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specifiedand directed. |
| 38 | Material & labourFormwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specifiedand directed. |
| 39 | Material & labourFormwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide complete all as specifiedand directed. |
| 40 | Material & labour for TMT bar 10mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire(annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed. |
| 42 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 43 | Material & labour for joint free non skid coloured ceramic tiles, 7 to 8mm thick (square or rectangular)area of each tile exc. 0.03 sqm but n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 44 | Material & labour for joint free coloured glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar 1:4 complete all as specified and as directed. |
| 45 | Material & labour for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (square or rectangular)area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 46 | All as per item No 45.00 here-in-before but in skirtings laid over 10mm thick plaster in CM 1:4 complete all as specified and directed. |
| 47 | Material & labour for cement concrete type E-2 1:5:10 (40mm graded crushed stone aggregate) in foundations, mass concrete and filling in sunken floor etc complete all as specified and directed. |
| 48 | Material & labour for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages :Stage 1:Providing 15mm thick plaster in CM 1:3 mixed withwater proofing chemical of Dr.Fixit or Shalicrete \"R\" of STP Ltd in the proportion/quantity all as per manufacturer\"s instructions.State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces.Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufacturer\"s instructions.Stage 4:Laying fiber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky.Stage 5:After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer\"s instructions.Stage 6:Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer\"s instructions.Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES : (i)Mode of measurement: Actual area treated (floor and adjoining walls) will be measured and paid.(ii) Contractor can use equivalent chemicals form E-in-C\"s branch list, as approved by GE. Decision of GE shall be final and binding. |
| 49 | Material & labour for 18 to 20 mm thickgreen marble (table rubbed and polished) in steps, cooking platforms over and including cement screed bed 15 mm thickCM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including cutting and polishing complete all as specified and directed. |
| 50 | Demolition of brickwork built in cement mortar, including all quoins, arches, pillars etc of any description including removing debris from site complete all as specified and directed. |
| 51 | Material & labour for brickwork with sub class `B\" bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 52 | Supply onlyIntegral Water Proofing compound complete all as specified and directed. |
| 53 | Material & labour for preparing plastered or unplastered new surfaces of ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash complete all as specified and directed. |
| 54 | Material & labour for preparing oldsurfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and directed. |
| 55 | Material & labour for preparing plastered or unplastered new surfaces of walls including brooming down or steel wire brushing, scraping down and including two coats ofdistemper oil emulsion over one coat of alkali resistant primer complete all as specified and directed. |
| 56 | Material & labour for complete removal of existing treatment from surfaces of walls & ceilings mechanically and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper (including old surfaces) and applying wall putty 3 mm average thickness including two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and directed. |
| 57 | Material & labour for preparation of new plastersurface of walls, chajjas, soffits & beamincluding necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade @ 1.43ltr/10sqmover a coat of exterior primer @ 2.20kg/sqm complete all as specified and directed. |
| 58 | Material & labour for Complete removal of existing treatment from external surfaces of walls, chajjas, soffits & beamincluding necessary scaffolding mechanically and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper (incuding old surfaces and applying applyingtwo coats of acrylic smooth exterior paint of required shade1.43ltr/10sqm over a coat of exterior primer 2.20kg/sqm complete all as specified and directed. |
| 59 | Material & labour for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified anddirected. |
| 60 | Material & labour for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and directed. |
| 61 | Material & labour for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 62 | Material & labour for preparation of old painted steel surfacesof any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. Note for item no 53 to 62 :(i) Shade of the paint shall be approved by GE / Engineer-in-Charge.(ii) The work must be executed through authorised Applicator of manufacturer and approved by GE before commencement of work.(iii) Complete work will be strictly executed by mechanical means / tools / machines required for smart periodicals i.e. vacuum based sanding machine, mechanical mixer, grinder and rollers etc and the cost of T&P required is bear by contractor & included in this item. (iv) Multi purpose mixer shall be used for uniform and proper mixing of putty. The quoted rate shall deemed to be included the above provision and nothing extra shall be paid on this account).(vi)After periodical services of Room corridor etc , entire cleaning including paint marksfrom window/ door/ glass panes shall be removed by the contractor in all respect. Removing /cleaning of painting material in floor /wall tiles etc shall be borne by contractor & included in this item.(vii) The work shall be carried out upto G+3. Necessary scaffolding upto G+3 bldg shall be deemed to be included in unit rates.(viii) Quoted rate is deemed to be inclusive of all materials such as putty, primer, paint, etc unless specified otherwise. |
| 63 | Material & labour for 75 mmthick cement concretetype C-1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protections, to be finished even and smooth without using extra cement complete including use of necessary formwork complete all as specified and directed. |
| 64 | Taking up or down 15mm steel tubing and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and directed. |
| 65 | Taking up or down20mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and directed. |
| 66 | Material & labour for GI tubing, 15mm bore `medium grade`with all fittings and fixed to walls and ceilings or laid in floors etc complete all as specified and directed. |
| 67 | Material & labour for GI tubing, 20mm bore `medium grade`with all fittings and fixed to walls and ceilings or laid in floors etc complete all as specified and directed. |
| 68 | Re-fixing old steel tubing, bore of pipe 15mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed. |
| 69 | Re-fixing old steel tubing, bore of pipe 20mm and connections including connections in new or old position (walls, ceiling, floors, etc) complete all as specified and directed. |
| 70 | Dismantling water tank of capacity exc. 250 ltr but n. exc. 500 ltr and removing to store complete all as specified and directed. |
| 71 | Disconnecting existingwater tank of any description exceeding 500 litres but n.exc 1000 litres capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position complete all as specified and directed by Engineer-in-charge. |
| 72 | Supply & Fixing for 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed. |
| 73 | Supply & Fixing forball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 74 | Supply & Fixing forgun metal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 75 | Taking down AC, PVC pipes of 100/110mm diaof any description including all fittings complete all as specified and directed. |
| 76 | Taking down CI pipes of 100/110mm diaof any description including all fittings complete all as specified and directed. |
| 77 | All as per item No 76.00 here-in-before but 75/80 mm dia pipes complete all as specified and directed. |
| 78 | Supply and Fixing 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval including material and labour for necessary scaffoldingand formwork (G+3 storeys) and safety arrangement complete all as specified and directed. |
| 79 | Supply & Fixing for PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and directed. |
| 80 | Supply & Fixingfor 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to wallsincluding suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and directed. |
| 81 | Supply & Fixingfor 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and directed. |
| 82 | Supply & Fixing forCI 100mm bends with door complete all as specified and directed. |
| 83 | Supply & Fixing forCI 100mm single branch piece with door complete all as specified and directed. |
| 84 | Supply & Fixing forCI 75mm bends with access door complete all as specified and directed. |
| 85 | Supply & Fixing for cast iron cowls 100 mm size complete all as specified and directed. |
| 86 | Material & labour in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed in cement concrete type B-1(1:2:4) complete all as specified and directed. |
| 87 | Supply & Fixing in repairs for Cast Iron `P /STrap 100mm bore complete all as specified and directed. |
| 88 | Supply and Fixing in repairs, salt glazed stone ware gulley traps 150x150mm size square mouthed type ‘P’ including CI cover complete all as specified and directed. |
| 89 | Supply & Fixing in repairsvitreous china squatting pan, \"Orissa\"pattern, size 580 X 440mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, antisyphonage pipe joint and to socket or stopper, including flush pipe all fittings etc complete all as specified and directed. |
| 90 | Supply & Fixing in repairs Vitreous china wash down water closet pan “Pedestal Pattern” colouredwith wcseat cover coloured closed pattern with flat bottom and mild steel chromium plated or aluminized hingingdevice including PVC flush pipe and joints etc and connection to drain, flushing, pipe, anti-syphonagepipe, and fixing arrangements with fixing bolts CPHealth Faucet with 1.5 mtr tube & Hook of selected etc complete all as specified and directed. |
| 91 | supply and fixing in repairs low level flushing cistern 10 ltrs capacity, and connections to pies an fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, including brackets complete all as specified and directed. |
| 92 | Supply & Fixing in repairs vitreous china wash hand basin coloured of oval tiff any shape minimum of size 550mm x 400mm with and including bottle trap chromium plated heavy duty 32 mm dia , PVC connection of 15mm dia & 450mm long with PTMT nuts, 15mm bore Basin mixer long swan neckchromium plated with high pressure and 32mm dia brass waste fitting complete all as specified and directed. |
| 93 | Supply & FixingMirrorcabinet (Multi - Utility) size 355 X 455mmof selected quality complete all as specified and directed. |
| 94 | Supply & Fixing in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engineer-in-Charge. |
| 95 | Supply & Fixing in repairs cast copper alloy, fancy type 15 mm bore CP Concealed stop cock long shank and long threading chromium plated of screwed down to iron pipes, high pressure complete all as specified and directed. |
| 96 | S/F in repairs 15mm bore CP cast copper alloy, Angular valve ( fancy type),screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 97 | Supply & Fixing in repairs long body CP, bib tap (half turn) 15 mm dia cast copper alloy chromium platedfancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 98 | Supply & Fixing in repair sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste, including sink coupling bedding in cement mortar on to dwarf wall or with including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm, bowl size 410mm x 330mm x160mm and including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, 15mm bore pillar tap cast copper alloy chromium plated with high pressure and 32mm dia brass waste fitting complete all as specified and directed. |
| 99 | Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 100 | Supply & Fixing in repair brass, CP shower roses with CP Arms, 15mm bore, complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply & Fixing in repair 1 mm thick stainless steel plate rack of overall size 1200x900mm and weight not less than 6 kgs as approved complete all as specified and directed. |
| 102 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and as directed. |
| 103 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and as directed. |
| 104 | Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed. |
| 105 | Demolition and breaking up drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar , in 150 mm internal dia complete all as specified and as directed. |
| 106 | Material & labour reinforced concrete pipes, class NP2, 150 mm bore, laid and jointed complete with collars complete all as specified and directed. |
| 107 | Material & labour100 mm thick Concrete bed to drain pipes in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed. |
| 108 | Supply & Fixing of auto closing hinges openable at 0 degree for cabinet shutters complete all as specified and directed. |
| 109 | Supply & Fixing 50mm magnetic catches with brass body and striking plate including letting in as fixed, complete all as specified and directed. |
| 110 | Material & labour Plain cement concrete 1:3:6 type C-2 using 20 mm graded stone aggregate as in surface channel, drain and manholes complete all as specified and as directed. |
| 111 | Material and labour for PCC 1:2:4 Type B-1 using 20mm graded stone aggregate as in benching, coping including necessary form work complete all as specified and as directed. |
| 112 | Material & labour Precast cementconcrete PCC 1:2:4 type B-1 (20mm graded aggregate) CM 1:4 in landing cover slab, drain and manhole cover , shelves troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 113 | Rooting out trees, flora & faunaand foliage as grown on RCC roof surfaces and brick/stone walls by cutting hole into slabs/walls for digging out roots and using chemical to burn deep rooted tree roots etc and making good dirturb portion of wall/roof with cement concrete 1:2:4 type B 1 complete all as specified and directed. |
| 114 | Material & labour for machine cut kota stone slab 18-22 mm thick as in floor /staircase riser & treader (one piece) ,vertical surfaces /skirting etc ,set and jointed with grey cement slurry mixed with pigment to match the shade of slab, size of slabexceeding 0.11 sqm but n.exc. 0.36 sqmincluding screed bed 15 mm thick in cement mortar 1: 4 and a coat of cement slurry @ 3 kg/sqm including rubbing/grindingand beeswax polishing etc complete all as specified and directed.Note:- (a) Rates also includes rounding of edges for treader staircasein this item for necessary raking,circular cutting or notching and waste on stone etc.(b) kota stone will be provided one piece ineach riser & traider. (c) Rate also includes Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc. |
| 115 | Material & labour for repair work in existing terrazzo topping tiles and Kota stone etc including grinding andbeeswax polishingin floors ,skirting, dado etc, with admixture of pigment to match the shade complete all as specified and as directed by Engr-in-Charge. Note: (i) Rates deemed to include for necessary replacement of terrazzo topping tiles and Kota stone slabetc which are required for repair of existing floor, no extra payment for utilizedmatarial in repair work in floor shall be made.(ii)Mode of measurement: Actual area grinding with beeswax polishing with repair(floor and adjoining walls) will be measured and paid. |
| 116 | Removing demolished materials etc (other than spoil) to a distance exc 1.00 km and n exc 1.50 km includingloading, unloading and stacking etc complete all as specified and directed. |
| 117 | Taking down carefully copper/aluminium point wiring light ,fan, light fittings, socket or power complete,such as switches, ceiling roses,pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc.complete all as specified and directed by Engineer-in-Charge. |
| 118 | Material & labour for point wiring with single corePVC insulated but sheathed 1.5 sqmm FRLS multistranded copper conductor FRLS cable 1100 volt grade IS-694 marked concealed conduit wiring drawn in and including rigid non metallic PVC conduit not less than 20mm dia ISI marked medium grade with all conduit fittings and fixing accessories including sunken anodized pressed steel terminals boxes 2mm thick cover with 3mm thick plastic laminated white sheet cover for mounting switches, sockets, fan regulators , etc and single core PVC insulated and sheathed 1.5 sqmm FRLS multistrand copper conductor cable 1100 volts grade IS-694 as continuous earth wire connecting to common earth dolly complete for following all as specified and directed by Engr-in-Charge for the following :- . |
| 119 | One light point controlled by one switch one way complete all as specified and directed. |
| 120 | One fan/exhaust fan point controlled by one switch complete all as specified and directed. |
| 121 | One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and directed. |
| 122 | One socket outlet 5 Amp controlled by one switch on independent board complete all as specified and directed. |
| 123 | One bell/buzzer point controlled by one push button switch complete all as specified and directed. |
| 124 | Material & labour for point wiring with single corePVC insulated but sheathed 2.5 sqmm FRLS multistranded copper conductor FRLS cable 1100 volt grade IS-694 marked concealed conduit wiring drawn in and including rigid nonmetallic PVC conduit not less than 20mm dia ISI marked medium grade with all conduit fittings and fixing accessories including sunken anodized pressed steel terminals boxes 2mm thick cover with 3mm thick plastic laminated white sheet cover for mounting 15 Amp Socket outlet and switches etc and earth wire single core PVC insulated but unsheathed multistranded copper conductor cable 1100 volts grade IS-694 marked 2.5 sqmm FRLS cable as continuous earth wire connecting to common earth dolly complete all as specified and directed by Engr-in-Charge. |
| 125 | Supply and fixing for switch piano flush type 5 Amps, single pole one way complete, all as specified and directed by Engr-in-Charge. |
| 126 | Supply and fixing for socket out let 3 pin 5 Amps, flush type complete, all as specified and directed by Engr-in-Charge. |
| 127 | Supply & Fixing switch piano flush button single pole one way 15 Amp complete , all as specified and directed by Engr-in-Charge. |
| 128 | Supply & Fixing socket outlet 2 in 1 , 6 pin 5 Amp and 15 Amp flush type universal complete , all as specified and as directed by Engr-in-Charge. |
| 129 | Supply and fixing for ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed by Engr-in-Charge. |
| 130 | Supply and fixing in repairs electric ding dong bell, 230 volt AC, single pole, complete, all as specified and as directed by Engr-in-Charge. |
| 131 | Supply and fixing for flush type bell push, 5 Amp complete all as specified and directed by Engr-in-Charge. |
| 132 | Supply and fixing stepped type electronic fan regulator 300 watt, 230 volts, 50 HZ, AC. Supply complete all as specified and as directed by Engr-in-Charge. |
| 133 | Supply and fixing for lamp holder, PVC/poleycarbonate type, insulated body with back plate of batten fitting complete all as specified and as directed by Engr-in-Charge. |
| 134 | Supply and fixing of LED bulb 7 watt fixed in pendent holder /bulk head complete all as specified and directed. |
| 135 | Supply and fixing LED lights fitting 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 136 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr in charge. |
| 137 | Taking down old unsv MCCB DB TPN type of any size complete all as specified and directed by Engr in charge. |
| 138 | Supply and fixing Vertical type load line distribution board, double door, 12 way, AC ,3 Phase, 415 volts ,TPN, bus bar 200 Amps rating and earth bus & din rail suitable for accommodate MCCB 100/125 Amps 16 KA 4 pole as incomercomplete all as specified and directed Engr-in-Charge. |
| 139 | Taking down old unsv MCB DB SPN type of any size complete all as specified and directed by Engr in charge. |
| 140 | Supply and fixing for sheet metal enclosure DB Single pole & neutral240 volts double door 8 way with 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge. |
| 141 | Taking down unserviceable MCB/MCCB of any capacities from the MCCB DBs /MCB DBs after disconnecting the electric supply complete all as specified and directed. |
| 142 | Supply and fixing for MCCB, 4 pole,125A ,16 KA , 50 Hz, 415V adjustable thermal and magnetic settings complete all as specified and directed by Engr-in-Charge. |
| 143 | Supply & Fixing for MCB , SP 6 to 32 Amps , 240V AC of 10 KAcomplete all as specified and directed by Engr in charge. |
| 144 | Supply & Fixing for MCB , SPN 40Amps , 240V AC of 10 KAcomplete all as specified and directed by Engr in charge. |
| 145 | Supply & Fixing for MCB , SP 40Amps , 240V AC of 10 KAcomplete all as specified and directed by Engr in charge. |
| 146 | Taking down unserviceable submain wiring of aluminium /copper two runs of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed. |
| 147 | Material & labour for submain wiring with two run of 6 sqmm singlecore PVC insulated butunsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts gradeIS:694 marked and one run of 6 sqmm PVC insulated butunsheathed FRLS cable for earth continuity conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all accessories and fittingsall laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuityconductorof similar type cable complete all as specified and directed.Note: The above mentioned runs of single core cable and specified earth continuity conductor and relevant conduit with fittings accessories will be measured as one run. |
| 148 | Material & labour for submain wiring with two run of 2.5 sqmm singlecore PVC insulated butunsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts gradeIS:694 marked and one run of 2.5 sqmm PVC insulated butunsheathed FRLS cable for earth continuity conductor drawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all accessories and fittingsall laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuityconductorof similar type cable complete all as specified and directed. Note: The above mentioned runs of single core cable and specified earth continuity conductor and relevant conduit with fittings accessories will be measured as one run. |
| 149 | Supply and fixing in replacement ofsheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with and including one single pole MCB 20 amps complete all as specified and directed by Engr-in-Charge. |
| 150 | Disconnect & taking out carefully pre paid 1ph electric meter and deposit to Air Force Barrack warden and refixing the same including connection with suitable size wire as a functional condition complete all as specified and directed by Engr in charge. |
| 151 | Supply & Fixing in replacement of Thermoplastic (Polycarbonate/Polystyrene) , IP65 as per IEC 60529 , corrosion proof, suitable for Meter box lid screws made of stainless steel V2A, internally embedded gasket for lid and enclosures, metric size knock outs for cable entry from top and bottom with transparent Hinged lid. DB should be able to adapt any make of MCB or din mountable equipment and tested as per as IEC 60439-3, fit for the new standard IEC 60 364-4-41, glow wire test IEC 695-2-11: 750C, flame retardant , self -extinguishing protection against mechanical load IK 08 (5 Joule) in accordance with IEC 62262 and enclosure dimension should be 217x253x115mm (LxBxH). |
| 152 | Supply & Fixing in replacement of LED bldg security light highly efficient high power LED bldg light fittings 30 watt with powder coated pressure die cast aluminium high power LED bldg light with heat resistance toughened glass lens including inbuilt daylight sensor, IP 66 IK08, 120 lm/watt with internally prewired incl electronic driver and connecting up with three core flexible copper conductor 1.5 sqmm cable complete all as specified and directed. |
| 153 | Material & labour in replacement of GI pipe light grade 40mm dia bracket of length 1 mtr to make shape L type for street light fitting complete all as specified and directed. |
| 154 | Material & labour in replacement of MS flat clamps of size 30mmx5mm thick including nut, bolts and washer suitable for street light bracket fitting on pole complete all as specified and directed. |
| 155 | Disconnect the supply and taking down carefully ceiling fans of 1200mm sweep incl removing the blades from fan and taking custody by contractor and refixing the same in its original positionor any other position complete all as specified and directed includingits fittings and fixtures after carrying out the the following repair works :-(i)painting of fan motor and blades incl down rod with one coat of synthetic enamel paint (white) by spraying after preparation of surface by cleaning all dust and filling cavity with filler, greasing, bearing ( No 6201/6202/6203/6204), gun metal copper alloy bush suitable for existing make ceiling fans, canopy, U clamps, capacitor of suitable capacity, heavy duty rubber reel suitable for 1200mm sweep size for ceiling fan and reassembling the fanincluding testing & MES Number by synthetic enamel paint and necessary connection from ceiling rose to fan of suitable size 3 core wire complete all as specified and directed. |
| 156 | Material & labour for rewinding of burnt fan motor with super enameled copper wire suitable for sweep 1200 mm incl testing complete all as specified and as directed by Engr-in-Charge. |
| 157 | Disconnect the supply and taking down carefullyexhaust fans of any sweep and any size and taking custody by contractor and refixing the same in its original position after following necessary repair works :- Dismantling the blades, opening the casting and cleaning the dust properly , greasing and oiling the bearing , cleaning the winding incl applying one coat of synthetic enamel paint by spraying after preparation of surfaces by fillings cavity with filter and cleaning all dust after carrying out proper repairing and testingincl necessary connection from ceiling rose to fan of suitable size 3 core wire complete all as specified and directed. |
| 158 | Supply and fixing louvers for exhaust fan of size 300mm sweep including taking out old damaged louvers complete all as specified and as directed by Engineer-in -charge. |
| 159 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm incland necessary connection from ceiling rose to fan of suitable size 3 core wire complete all as specified and directed. |
| 160 | Disconnection the water supply pipe from geyser of capacity 25 ltrs and taking down carefully the same from its mounting place and deposit to MES complaint cell/AF Bk warden and re-fixing the same in its original position after necessary repair wks to make functional complete all as specified and as directed by Engr-in-charge. |
| 161 | Taking out old unserviceable LT underground cable any type from trenches, pipes & poles complete all as specified and directed. |
| 162 | Supply, laying and testing of cable XLPE insulated screened PVC bedded galvanised steel strip armoured electric power cable heavy duty 1100 volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed. |
| 163 | Supply and laying DWC HDPE pipe 90x75 mm dia bore, medium class, ISI Marked, double wall corrugated for open / underground laying cable, cut to size and making thetubing for cable protection including cutting of road / PCC and making good the surfaces to match the existing surfaces complete all as specified and directed. |
| 164 | Material & labour for GI tube light grade of bore 50 mm with all fittings and fixed complete to walls and ceiling or laid in floor for cable crossing including cutting of bitumen roads/PCC and making good after laying of cable up to building height complete all as specified and directed. |
| 165 | Material & labour for earthing complete for bldgwith galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm diaby means of nuts, bolts, thimbles, check nuts, washers of GI or steel,PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish ,internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (2009) and specified includingprovision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete, all excavation andearth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified & directed by Engr-in-Charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
